Is it possible to send a text by voice from a 3gs?

i know that the droid allows you to speak your message to be texted.  is that possible with the 3GS?

Not with the current iOS.  I am using Dragon Dictation and after the text is created you have an option to send as an email or a text message as well as copy,  send it to twitter and facebook.  The app is free and works really well.

Similar Messages

  • Is it possible to send a text to several contacts at the same time and not have their replies go to everyone on the list?  I have an iphone 4s and most of the people I am texting also have iPhones.  I do have group messaging turned off.

    Is it possible to send a text from the iphone 4s to several contacts and not have their replies go to everyone else on the original text?  I have group messaging turned off but this seems to do nothing. 

    Do this instead:
    Email everyone instead of texting and use BCC: which will hide all of the people's emails.

  • Is it possible to send a text message using the UDP protocol?

    Support doc
    http://www.adobe.com/support/director/multiuser/using_udp/using_udp02.html
    says to use the following format with connectToNetServer:
    errCode =
    gMultiuserInstance.connectToNetServer([#remoteAddress:
    "chatServer.myCompany.com", #logonInfo: [#userID: "Bob",
    #password:
    "MySecret", #movieID: "Tech Chat"], #mode: #smus,
    #localUDPPort: 1627,
    #localAddress: "123.45.67.89", #remoteTCPPort: 1626])
    But if I change the mode to #text, it still sends out
    messages as smus.
    In fact, if I leave out the UDP parameters altogether but
    still use the
    list parameters for connectToNetServer, it still always sends
    as smus.
    Sends as smus:
    errCode =
    gMultiuserInstance.connectToNetServer([#remoteAddress:
    "chatServer.myCompany.com", #logonInfo: [#userID: "Bob",
    #password:
    "MySecret", #movieID: "Tech Chat"], #mode: #text,
    #localUDPPort: 1627,
    #localAddress: "123.45.67.89", #remoteTCPPort: 1626])
    Sends as smus:
    errCode =
    gMultiuserInstance.connectToNetServer([#remoteAddress:
    "chatServer.myCompany.com", #logonInfo: [#userID: "Bob",
    #password:
    "MySecret", #movieID: "Tech Chat"], #mode: #text])
    Only the string parameter method can be made to send text
    messages.
    Sends as text:
    errCode = gMultiuserInstance.connectToNetServer("Bob",
    "MySecret",
    "chatServer.myCompany.com", 1626, "Tech Chat", 1)
    Am I missing something? Is this a known issue? Anyone have a
    work around?
    -Jeremy

    Drat!
    Thanks for the answer though.
    alchemist wrote:
    > The multiuserXtra supports either tcp text or tcp smus
    connections.
    > The ability to send udp messages was an expansion to the
    original mus
    > protocol/xtra and is valid only for muXtra instances
    already connected in
    > smus mode.
    > So, if you are asking if you can create a udp instance
    and use it at will
    > (exchange udp messages with some remote udp socket),
    then the answer is no.
    >
    >
    > "Jeremy Aker" <[email protected]> wrote in message
    > news:[email protected]...
    >> I'm really sorry that I wasn't clear enough. I'll
    repeat the questions
    >> more concisely.
    >> Is it possible to send a text message using the UDP
    protocol? If so, how?
    >> Is the bug I described in my original message (see
    below) really a bug or
    >> am I doing something wrong?
    >> If it's a bug, does anyone have a work around?
    >>
    >> alchemist wrote:
    >>> And the question is?
    >>>
    >>> "Jeremy Aker" <[email protected]> wrote in
    message
    >>> news:[email protected]...
    >>>> Support doc
    >>>>
    http://www.adobe.com/support/director/multiuser/using_udp/using_udp02.html
    >>>> says to use the following format with
    connectToNetServer:
    >>>> errCode =
    gMultiuserInstance.connectToNetServer([#remoteAddress:
    >>>> "chatServer.myCompany.com", #logonInfo:
    [#userID: "Bob", #password:
    >>>> "MySecret", #movieID: "Tech Chat"], #mode:
    #smus, #localUDPPort: 1627,
    >>>> #localAddress: "123.45.67.89",
    #remoteTCPPort: 1626])
    >>>>
    >>>> But if I change the mode to #text, it still
    sends out messages as smus.
    >>>> In fact, if I leave out the UDP parameters
    altogether but still use the
    >>>> list parameters for connectToNetServer, it
    still always sends as smus.
    >>>>
    >>>> Sends as smus:
    >>>> errCode =
    gMultiuserInstance.connectToNetServer([#remoteAddress:
    >>>> "chatServer.myCompany.com", #logonInfo:
    [#userID: "Bob", #password:
    >>>> "MySecret", #movieID: "Tech Chat"], #mode:
    #text, #localUDPPort: 1627,
    >>>> #localAddress: "123.45.67.89",
    #remoteTCPPort: 1626])
    >>>>
    >>>> Sends as smus:
    >>>> errCode =
    gMultiuserInstance.connectToNetServer([#remoteAddress:
    >>>> "chatServer.myCompany.com", #logonInfo:
    [#userID: "Bob", #password:
    >>>> "MySecret", #movieID: "Tech Chat"], #mode:
    #text])
    >>>>
    >>>> Only the string parameter method can be made
    to send text messages.
    >>>> Sends as text:
    >>>> errCode =
    gMultiuserInstance.connectToNetServer("Bob", "MySecret",
    >>>> "chatServer.myCompany.com", 1626, "Tech
    Chat", 1)
    >>>>
    >>>> Am I missing something? Is this a known
    issue? Anyone have a work
    >>>> around?
    >>>>
    >>>> -Jeremy
    >

  • Hi, how is it  possible to send a text massage like " I'm in a meeting" while somebody is calling in to my iphone 4 ?

    Hi, how is it possible to send a text massage like "I'm in a meeting" while somebody is calling in to my iPhone 4 ?

    Unless you send the SMS, there is no setting on an iPhone to do this automatically.

  • When I send a text, it says -from: name lastname- instead of my number

    When I send a text, it says -from: name lastname- instead of my phone number, how do I remove this?
    I have deleted any old mail accounts and changed Appleid.

    When you send an SMS, or when you send an iMessage?
    An SMS/MMS can be sent from your cell phone number only and cannot be changed.
    If the recipient has your contact info available on their cell phone, your name will appear as the sender of an SMS/MMS especially if the recipient has an iPhone.

  • How do I send a text using messages from my macbook to an iPhone phone?

    How do I send a text using messages from my macbook to an iPhone ?

    I tried to send it to their phone number, but it said they were offline.  And they downloaded iMessage for the iPhone but it still wasn't sending from my computer.  Is there some kind of trick?

  • Is it possible to send international texts from iChat?

    I was wondering if one could send international texts using iChat. Or even Messages. Google has a texting service for offline chats. However this is not supported by the IM client. Does anybody know how to use this service using iChat?

    You can chat with anyone connected to the internet.
    iChat can use Google Chat, you just specify that the account uses Jabber Protocol.
    I currently have iChat connected to AOL Instant Messenger, Google Chat, and my company's Jabber based chat system.  All accounts working concurrently via iChat on Lion.
    As long as you and the person(s) you are chatting with are using the same chat service (Apple's iCloud, AOL's Instant Messenger, Google's chat (Jabber based), or any other Jabber based service), it does not matter what country they are located in.
    And you can use a service such as Skype to do phone calls (of course you can do audio and video via iChat and Google's chat as well)
    Message was edited by: BobHarris

  • Why can't I send group text messages on my Iphone 3GS any longer?

    I have been sending and receiving group text messages on my iphone 3GS for awhile and all of a sudden I am receiving "Message Send Failure" error messages when I try to send a group message.  I think I still get group messages but you can no longer see that it is a group message and who the group members are.  I turned the Group setting off and then back on in Settings and turned the phone off and back on with no improvement.

    Make sure your account is provisioned for messaging/texting.
    Also, Settings > Messages > MMS Messaging > On

  • Can you send a text (sms) message from a web site form ?

    Anyone know of a reliable script or app that will allow a site visitor to fill out a 'form' and send an instant text message from the site ?  Same as email...but rather than email...type out and send a text message instead ?
    Thanks, Tim

    Tecnically yes. This is because SMS is basically handled just like an email address, ie; [email protected]
    There are services out there that will charge you either flat rate or per message to send them for you as you would need to know what server that number is on. If you want to have people select what carrier that number is on, you just create a mail form with a dropdown with a list of carriers that then set the domain variable in the TO address field. You have to plan that the user doesn't know what carrier that phone number is on, thus where the pay-for sites come in handy.

  • I can't send a text using imessage from my iphone to an ipad

    I can't send or receive a text using imessage from my iphone to an ipad

    The Ipdas are using IOS 6 and can text to other iphones by phone number or apple id. I have tried hard resets and did a full restore and still no success. I am using IOS 6.0.1 and have had the phone checked at our local Apple dealer and I took it to the local ATT store to be sure my phone plan was not an issue.

  • Is it possible to send SMS text msgs(Not IMessages) from my IPad Air with Wi-Fi/cellular?

    Can you send an SMS text msg from an IPad Air that has Wi-Fi and Cellular network? It has its own phone number.. Just wondering.. Thanks

    To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
    How to Send SMS from iPad
    http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
    How to Receive SMS Messages on an iPad
    http://yourbusiness.azcentral.com/receive-sms-messages-ipad-16776.html
    Apps for Texting http://appadvice.com/appguides/show/apps-for-texting
     Cheers, Tom

  • Is it possible to NOT get texts (SMS) sent from my iPhone to all my devices

    I haven't yet set up iCloud and want to know if there is a choice about what gets pushed to all other devices. I want everything except text messages from iPhone sent to my other devices. Is this possible?

    SMS messages are not pushed to other devices.
    iMessages (if you have it turned on) will be pushed.

  • Cannot send/rec texts on iMac from non-iphone uses

    iMac has Yosemite installed
    iPhone 6+ has iOS 8.3
    This used to work until recently when I had to change my Mac ID password. Since then, I cannot sent a text message from my iMac to a non iPhone user.  Also it does not receive texts either...
    I can send/receive to anyone on the iPhone

    Hi again,
    So on the Mac in Messages > Preferences > Accounts does the account looked logged in  (iMessages) ?
    YES
    The Account can send Blue iMessages but not SMS, that is correct ?
    YES
    On the iPhone > Settings > Messages > Text Forwarding is it Enabled ?
    - OK, this is interesting...
    I select > Text Messages Forwarding, My iMac appears, and the switch is OFF
    I tap it ON & get a textbox stating "Enter the code shown on your mac to allow txts to be sent/rec on the mac.."
    However, no code appears on the iMac...
    This appears to be the problem, any ideas???

  • How to send group text or emails from established groups in contacts

    I have numerous groups I want to sent both text and emails to.  These groups are in my contact and the contact recognize the group.  How do I get those group populated into an email or text so I do not have to enter them 1by 1 time and again?

    can you not just type in all of your contacts names?? or are there too many

  • When I send a text using iMessage from my mini iPad, it selects a photo that I deleted from my MacBookPro (in Users

    When sending iMessages using iPad mini an old photo that I've deleted from my MacBookPro in 'System Preferences/User&Groups' pops up with each iMessage I send. Genius Bar said iMessage was pulling this from iCloud and they recommended I change the photo inmy iCloud account, which I did. This did not help. Where could iMessage be gathering an old photo that's been deleted? Has anyone experienced this? and if so, is there a solution/fix?

    I don't follow where this picture is appearing.  You have to go to some trouble to add a picture to an iMessage.  Might it be popping up from a contact name you are using that happens to have a picture associated with it in your contacts list?

Maybe you are looking for

  • APXIIMPT-PayablesOpen Interface FND_REQUEST.submit_request returns 0 inToad

    I am submitting APXIIMPT (Payables Open Interface Import) FND_REQUEST.submit_request from Toad and it returns 0 . I am setting context before I submit the request. Not sure what is missing. Any help is very much appreciated! Here is my code: BEGIN Fn

  • Crystal Report Viewer Credential Prompt for Report with Dynamic Parameters

    The .NET Crystal Report Viewer is prompting for database credentials when launching a report containing dynamic parameters. This only occurs for reports created with SAP Crystal Reports 2011 designer. Reports created with Crystal Reports XI designer

  • Setting current values in Multiple Select List in SQL Query based Report

    Hi, I have a report based on a sql query that contains a multiple select list. Unfortunately I cannot get the multiple select list to display the current values (p_value) correctly. I have created a page item, :p311_current_versions, that is set usin

  • Some Guidance on Script I'd like...

    I have an idea for a script for Illustrator, but I would like to know how possible this is. I have a manual way to do it, but would like the cold specificity of the computer to do it for me in a single command. I want to select a piece of artwork, ha

  • Logoff in Winnt with command in labview

    Hello, some time ago somebody posted a message to ask about logoff menu when a button is pushed in labview. I read it but didn't need it so I removed it. It turns out that I do need it. Can somebody tell me how it was done ? ==> Push a button in LabV