Is it possible to show/hide dynamically columns in RDLC form?

We need to show/hide dynamically columns in our Report RDLC form based by the user desire needs.
We need by the predefined checkboxes to set which columns should be seen and which should be hidden.
Is it possible in RDLC form to make it "show/hide columns dynamically" with any way?

Depends on what you mean dynamically, you still need to press the view report button.
What you can do is right click on the column you want to be able to hide/display in design mode,
click "Column visibilty", choose "show or hide based on an expression" then in your expression base your true or false on a boolean parameter for each column

Similar Messages

Show/hide a column in JTable

I want to show/hide columns in JTable
How is this possible
Note that columns that are hidden may be showed later
thanks in advance
Renjith

I tried out for this:TableColumn col = jTable.getColumnModel().getColumn( colnum );
if( col != null )
col.setPreferredWidth( 0 );
col.setMaxWidth( 0 );
}But the column seems to have minimum width which you can't even change with col.setMinWidth( 0 );

APEX4: Is it possible to show/hide a field on form based on Radio selection

Hi,
On a form, I've a radio group (with two values) and two select list. Based on the selection in radio group, I want to show/hide the select list.
Like, when the user clicks Radio Group Value - RG_A, SL_A has to be visible, and when user clicks Radio Group Value - RG_G, SL_B has to be visible.
Is this possible in APEX 4? How can I do it?
Thanks for the help.
--Hozy

Hi,
Yes, you can do it using Dynamic Actions.
See this thread as well. APEX4: Populating fields from database based on the SelectList value
In Radio Group you will need to identify the button clicked from its ID and / or value. Thats because the Radio Group Item creates as many IDs / Items as there are options P1_ITEM_0, P1_ITEM1_1, etc.
Regards,

Show/Hide a column in a Table region

I have search page which queries the data and displays the records in a table region. We need to have an option to show or hide a non-database column at the end of the each row in the table. If the checkbox is selected, the last column should appear and if checkbox is deselected it should get disappeared.
I have used a transient attribute in the VO and using that transient attribute trying to show the text field when the checkbox is selected. For ex, if the search returns 6 rows - if you select the checkbox of the first row , the last column "CTS" gets displayed without any issues but if you select the other rows (without checking the first row), the CTS column is not displayed.
The column is getting displayed only IF you select the checkbox of the first row and try it other rows. If you try to select the checkbox of other rows without selecting the 1st row, it doesnt show the CTS column.
AM has the PPR event
=============
public void CheckOnClick(String v_chkBox,String SalesContact,Boolean executeQuery)
System.out.println("Enters Checkbox event()");
USSContactMainVOImpl pVO= getUSSContactMainVO1();
Row poRow[]=pVO.getFilteredRows("Chkbox","Y"); // get all the selected rows
for(int i=0;i<poRow.length;i++ )
Row rowi=poRow;
System.out.println("Value:" + rowi.getAttribute("Chkbox") );
rowi.setAttribute("CTSEngineer_TR",Boolean.TRUE); // transient attr
//end of CheckOnClick()

I just referred to the Dev Guide and understand that we can use the identifier of the PPR event source row (Page 262) but still the issue persists.
String rowReference = pageContext.getParameter(OAWebBeanConstants.EVENT_SOURCE_ROW_REFERENCE);
I have a rawtext as the first column( its just a dummy column since the PPR event is not getting fired if the checkbox is the 1st control/column) and the 2nd column is the check box which has a PPR event. The PPR event fires whenever the check box is selected or deselected but surprising the text field gets editable only if the 1st row is clicked.
Changed code is as always - not sure why the table shows/hides the text column only if the 1st column is selected. Will appreciate any help.
PFR:
===
if ("OnSelect".equals(pageContext.getParameter(OAWebBeanConstants.EVENT_PARAM)))
OAApplicationModule am = pageContext.getApplicationModule(webBean);
System.out.println("The AM name is "+am);
Boolean executeQuery = BooleanUtils.getBoolean(false);
String str1 = pageContext.getParameter("Check_Box");
String v_SalesContact = pageContext.getParameter("SalesContact_qry");
//1401
String rowReference = pageContext.getParameter(OAWebBeanConstants.EVENT_SOURCE_ROW_REFERENCE);
Serializable[] parameters = {str1,v_SalesContact,rowReference,executeQuery };//1401
Class[] paramTypes = { String.class,String.class,String.class,Boolean.class };//1401
am.invokeMethod("CheckOnClick",parameters,paramTypes);
AM(PPR Event)
==========
public void CheckOnClick(String v_chkBox,String SalesContact,String rowReference,Boolean executeQuery)
OARow rowx = (OARow)findRowByRef(rowReference);
if (rowx !=null){
System.out.println("row ref");
System.out.println("reo fref"+ rowx.getAttribute("CTSEngineer_TR") );
rowx.setAttribute("CTSEngineer_TR",Boolean.TRUE);
Edited by: MyOAF on Jan 14, 2010 6:25 AM
Edited by: MyOAF on Jan 14, 2010 6:26 AM

BOM: Show/Hide standard columns in CS03

Hi,
investigating the code I can see that in the transaction CS03, CS02 the table with data of standard position contains many columns that i would like to display them.
Currently, I can only see some columns, leaving other hidden. How I can show / hide the present columns in the table of positions?.
Thanks.

Inside the CS02 screen you can find table settings, will be there in top right. there you can make the field invisible.

Hide Dynamic columns and remove space

I have an application that allows users to generate a Crystal report containing selected columns. A user is able to check which columns should appear on the report from a web page. I'm able to display and suppress the dynamic columns but the space for the dynamic columns that are not selected remains. How can I remove the space and have the columns move to the left?
I'm using VS 2003 and Crystal 10.

As Ludek mentioned you would need to use the RAS .NET SDK to completely remove the column from the report. What you could do is start with a blank report, only have your database info added, then build UP your report rather than remove items. The ReportObjectController has a method called AddByName() that will insert a field into your report. It will add the field from left to right with a small buffer space.
In order to use the RAS .NET SDK with Visual Studio .NET you'll need to upgrade to Crystal Reports 2008 or Crystal Reports for Visual Studio 2010 (good free price here).
[RAS .NET Developer Guide|http://help.sap.com/businessobject/product_guides/boexir31/en/rassdk_net_dg_12_en.chm]
[RAS .NET API Ref|http://help.sap.com/businessobject/product_guides/boexir31/en/rassdk_net_apiRef_12_en.chm]

Dynamic columns in smart form

Hi All,
The requirement is to display columns in the form dynamically based on the user input. For example if a country is chosen, each of the states is to come as a column. So based on the country, the no. of states is likely to change. This would call for dynamically changing the no. of columns in the smartform based on the country chosen. Is this possible to achieve in smartforms?
Regards,
Divya.

You cannot have dynamic columns in smartform instead create all the required columns and display them based on the conditions passed from the program.
Refer the link -
Re: smartforms - dynamic column of tables
Regards,
Amit
Reward all helpful replies.

Dynamic Columns in Web forms

Hi
Web form is a Account ( Rows) X Period ( Columns) Webform.
I want to have dynamic columns in the web forms. For example, In the month of March the User should be able to see Jan, Feb and March in the columns. And in the month of may.. Jan, Feb, Mar, Apr, May should be the columns.
The remaining months are not required .
Can this be achieved??
Regards
Abhishek

Try something like:
C1=P#@Cur
C2=P#@Cur(+1)
C3=P#@Cur(+2)
It seems to work.

SP2013 Is it possible to show/hide columns based on column selections?

SharePoint 2013
I have a lists with a school district selection choice column (refer to as column A). Then I have three other columns with schools based on district. What I would like to do is only show schools in a certain district based on what district
is selected in column A. Can anyone tell me if this is possible and if so, how can i acheive it?

It generally takes a little script to get the cascading right;
http://sharepoint-works.blogspot.ch/2012/02/cascading-dropdown-or-filtered-values.html
https://www.youtube.com/watch?v=70-hXWY6ARY
InfoPath is another possibility. Are you using that?
w: http://www.the-north.com/sharepoint | t: @JMcAllisterCH | YouTube: http://www.youtube.com/user/JamieMcAllisterMVP

Possible to show/hide sections in a table?

Hello all,
First post here. I've only started using LiveCycle Designer a few weeks ago, never knowing that it came with my Acrobat. I've been busy converting forms we use in our business into pdf versions that can be filled, and created some with simple scripting etc. Anyway my most ambitious effort to date is to create a gross payroll calculator in which I would enter the total hours worked for each employee and the gross payroll is calculated. The calculations I have no issue with.
I am using a hidden "config" subform (thanks to kingphysh for your easy and simple example!) to store the employee names and payrates and the department they work in.
My main form, the one on which I am entering total time for each employee, consists of a table with a section for each department. Thus I can put all employees in a department in one section of the table and then easily do subtotals by department etc.
Table1
Table1.Section1
      Dept. Name | Emp. Name | Pay Rate | Total Hrs | Gross Pay| <-- this would be one row in the section
Table1.Section2
      Dept. Name | Emp. Name | Pay Rate | Total Hrs | Gross Pay|
Table1.Section3
      Dept. Name | Emp. Name | Pay Rate | Total Hrs | Gross Pay|
and so on. Each section also has a footer row for subtotals.
This form will be used at various physical locations and not every location will have all departments. Thus I want the table to show only those sections for which the corresponding departments exist based on a selection (checkbox) that is on the hidden config page.
Its not so much the actual scripting thats a problem, but where to put the script. Should I use a Table1 event or the checkbox event? I've tried both but neither works as desired. Or should I use an event for the individual rows in the section itself?
Any pointers and suggestions will be greatly appreciated!
Harry.

Niall,
Many thanks for all your help. With the examples you provided, I have been able to almost finish the form and learned a little bit along the way too.
There are a couple of things still vexing me though.
My form's hierarchy is as follows:
page1 (flowed)
     - wrapper (flowed)
          - form1 (positioned) <-- sub-form (form on which data is entered and calculation results are displayed_
               - table1
                    -HEADER
                    -Section1 - bodyrow
                                   - section1 footer
                    -Section2 - bodyrow
                                    - section2 footer
                    -FOOTER
          - config   (positioned) <-- sub-form (normally hidden "config" form which stores employee data - accessed by password
               - table1
The sub-form form1 contains a table with six sections. Each section represents one department and has body rows and a footer row for subtotals.
the number of body rows in each section can vary with the number of employees in the department.
I have two issues remaining with the form and it will be done. Hopefully you will be able to point me in the right direction.
1. Pagination - in the form, I have set page1 to "flowed". wrapper is also flowed. form1 is positioned.
     I would like to be able to set it so that if any section is going to be split, it would go onto the next page.
     The header should be repeated in each page. Each section footer should be with the section, and the Table footer should be on the last page.
2. Column Subtotals
     I have set the form to be as general purpose as possible. Thus it can take time totals in either decimal or HH:MM format. I am having trouble adding columns of time totals in HH:MM format.
For example, given 3 time totals (all are in text fields):
10:35
15:59
03:24
I would thing the best way to do this is to parse the strings and add the minutes and hrs separately and then depending on the total of the minutes, use the floor and mod functions to get the correct total. I just can't get it to add the columns at all.
This is the code I am using to add the column:
if (_FD.count gt 0) then   //make sure at least one body row exists in this section
for i = 1 upto (_FD.count) do
mins = Sum(Right (FD[i].fdr_tot[i], 2))        // FD is the row and fdr_tot is the cell in the row which is to be included in the calc.
hrs = Sum(Left (FD[i].fdr_tot[i], (Len (FD[i].fdr_tot[i]) - 3)))
endfor
endif
I've tried using the code below as well to no avail.
mins = Sum(Right (FD[*].fdr_tot[*], 2))
hrs = Sum(Left (FD[*].fdr_tot[*], (Len (FD[*].fdr_tot[*]) - 3)))
Any suggestions will be greatly appreciated.
Thanks.

Show Hide Few columns rows in a report

Hi All,
I had requirement to develop an application having a report and based on some condition we need to hide or show few rows on clicking. Please view this report [here |http://apex.oracle.com/pls/otn/f?p=33897:1]
For example if I give CUSTOMER_ID as a hiper link when I click on "1" first 5 rows only should be visible. That is I need to toggle between hidden and shown condition.
I tried using Java Script
<script type="text/javascript">

</script>
And then using this script in query selecting the table and enclosing in <div > tag.
It works for a single column but few rows it doesn't work. Can someone please help me here. Thanks in advance.
Thanks & Regards,
Vikas Krishna

Hi
Vikas.
Here is an exmaple using emp (changed the empno to reflct you data so it's 10,11,12,13,100,101 etc...). I created a report with the source as
SELECT FLOOR(empno/10)*10 startid,
       DECODE(CEIL(empno/10)*10,FLOOR(empno/10)*10,CEIL(empno/10)*10+10,CEIL(empno/10)*10) endid,
       DECODE(MOD(empno, 10),0, empno, NULL) empno
     , empno empno1
     , ename
     , job
     , mgr
     , hiredate
     , sal
     , comm
     , deptno
FROM bb_emp
ORDER BY empno1Then I created a new template from scratch and selected named rows. I created Row Template one as
<tr>
<td>#EMPNO#</td>
</tr>
<tr id=row#EMPNO1#>
<td>#EMPNO1#</td><td>#ENAME#</td><td>#JOB#</td><td>#MGR#</td><td>#HIREDATE#</td><td>#SAL#</td><td>#COMM#</td><td>#DEPTNO#</td>
</tr>Then I included js in the header as follows
<script type="text/javascript">

</script>Then I hid the startid and endid columns in the report attributes and change empno (not empno1) to be a link as follows
javascript:toggle_visiblity(#STARTID#,#ENDID#);This now works as (i think) you wanted. Obviously you'll have to put all you formatting etc. from your theme into the template.
Cheers
Ben
http://www.munkyben.wordpress.com
Don't forget to mark replies helpful or correct ;)

Is it possible to show/hide a layer in all the files in a book?

Hi,
I have 5 catalogs organized in a book, every is at 10 languages, every language is at separate layer. Every book has between 30 and 80 Indesign documents.
I need to edit and print 4 of those languages and switching manually viability of the layers don't look like a good idea to me because of the possible mistake.
Is there a way switching layers/languages to happen in same time?
The names to layers are same in all documents.
Thank you in advance!

M Blackburn wrote:
Synchronize Options does not include layers. I would guess that you would have to use Conditional Text to each layer -- could be a lot of work after the fact. If no one else posts a more helpful response, you may want to ask in the Scripting Forum.
I haven't tested it, but it might be possible to ignore or hide the layer(s) in the PDF you distribute or print. Worth a try.
HTH
Regards,
Peter
Peter Gold
KnowHow ProServices

Is it possible to show/hide a result text field only if another Text field is visible and has content?

Hi
Please could someone tell me if it is possible to make a text field visible only if another text field is visible and has content?
I have this which works for the content part, but sometimes the field is hidden, so the script must not apply.
var v1 = getField("Text1").value;
event.target.display = v1 !== "" ?
display.visible : display.hidden;
What I need is something along the lines of:
var v1 = getField("Text1").value;
event.target.display = (v1 !== "" && v1!=="Hidden") ?
display.visible : display.hidden;
Thanks for any advise.

Thanks for the hints which led me to the right solution. I created a query to check if the trigger for the visibility was there or not, and this works. The script I have used is:
var v1 = getField("Text1").value;
var v2 = getField("Checkbox").value;
var v3 = getField("Text2").value;
event.target.display = (v1=="" || v3=="" && v2=="On" ) ?
display.visible : display.hidden;

Possible to show file upload progress for web form submission?

I just made a simple form as a test. There are 3 files being submitted here via a "web form".
Files being uploaded in this case are of these sizes:
110MB
9MB
24MB
I'm testing functionality that will let a print shop's clients upload their files. For larger files they'll use FTP but this "order form" does a lot of business for them so we're trying to replicate in BC.
My problem is that I am wondering if there is a way to show the "upload progress" as a total %. Such as a visual status bar, etc.
As of now the only way it's showing is in the default browser status bar (chrome in this case):
http://cl.ly/image/1d3U0S1h2521
I read somewhere that the limit is 150MB for an upload. Wondering if that means 150MB TOTAL as in 3 files combined in my case. Or If I chose to allow 3 files to be attached would it allow for 450MB?
Also, if you do a user submitted web app instead and allow people to attach files that way, does the same file limit apply?
My second issue is that the upload speed seems to be SLOW. I know it's not my connection because on my non BC site as well as another with the same form, the files upload fairly fast. But on BC it just crawls and on a few tests I get this:
http://cl.ly/image/2T2q160M1R1n
Any help or suggestions with the file upload progress as well as file upload speed would be appreciated.
Thanks!

So if i have 3 files to be uploaded, the max allowed is 750MB correct? (just wondering if when uploading its 250mb total or per file).
Guess i'll do something fake to make it appear its working with a loading graphic or something.
My web browser (chrome in this case) shows the % uploaded. I wonder if all web browsers do the same. I havent tested yet.
If only there were a way to have javascript or something grab that same #% from the web browser itself and just format it to appear where I want on the form along with the % uploading.
Anyone know if that's possible?
Here's where Chrome for mac shows it:
http://cl.ly/image/1c3i3x25262j
If I could grab that (uploading 19%) from the browser and format it into css/html i'd be gold.
Then find if similar browsers do the same and write some js for each browser specifically to grab it.
In a perfect world at least....

Creating dynamic columns in rdlc report

Hi,
I want to generate an rdlc report where columns are not fixed and decided on the basis of user input.
So I can not design the report before and it should be done dynamically at run time. I have the data in datatable.
Can anyone help how to achieve this.

Hi,
You can do this by creating a crosstab report so that the column heading is from an item in the folder.
You cannot have dynamic headings for a table report.
Rod West

Is it possible to show/hide dynamically columns in RDLC form?

Similar Messages

Maybe you are looking for