Is it possible to use Create_Steam inside Create_deep_entity ?

Dear Netweaver Experts,
Has any body tried using Binary stream creation inside deep entity creation process ?
Please share your opinion.
Thanks in advance.

Hello Nitin,
I have not tried this. However when i think about this the below questions arises in my mind.
Firstly I am very doubtful about firing Create operation with an Entity which can Handle both Media Content & Data ( Header & their Items ).
How can we specify Content_Type here ? i.e., for example application/pdf for Media Content & application/json or xml for the Data which we are passing.
Will GW accepts both the Content Types in a single operation in the Headers that we pass? I dont think so. We have to try how exactly GW behaves in this case and i don't think it will allow.
Now lets consider we some how fired Create Operation with the above set up.
Now how the Call goes to Create_Deep_Entity and also Create_Stream at one shot ? How GW knows where to delegate the call ? i dont think GW can do this.
Lets say now some how both Media Content got Uploaded & also Data got Posted.
Now how Can we perform Read to get Media Content & our Deep Data as well with the Entity which we have created to handle both Media & Data ?
The way we read Media Content is Different ( Get_Stream with Special Semantics )  & the way we Read Data ( Get_Entity ) is different. I dont think this is possible.
All these are my questions & my opinions.
I am open for suggestions & corrections if anything is wrong here as i could share things to the best of my knowledge.
Regards,
Ashwin

Similar Messages

  • How to use function inside background job?

    I try to call function inside job. It does not work. Is it possible to use function inside job or not. I hope you can help me. Here is my example code.
    Start-Job -Name ForestJob {param($v01,$v02)
      $line = @()
      function test {
        return "testvalue"
      $t = test
      $line += $t
    } -ArgumentList $var01, $var02

    Hi,
    Just checking in to see if the suggestions were helpful. Please let us know if you would like further assistance.
    TechNet Subscriber Support
    If you are
    TechNet Subscription
    user and have any feedback on our support quality, please send your feedback
    here.
    Regards, Yan Li

  • My I phone 4 is stolen in Vienna of Austria, unfortunately I have some very important photo inside the phone, would it be possible to use the IMEI no. to  check where is the phone now? or you can lock i

    my I phone 4 is stolen in Vienna of Austria, unfortunately I have some very important photo inside the phone, would it be possible to use the IMEI no. to  check where is the phone now? or you can lock it / delete those information in the phone?
    rachel

    "would it be possible to use the IMEI no. to  check where is the phone now?"
    No.
    "you can lock it / delete those information in the phone?"
    No.
    Apple can do nothing at all.
    If you set up find my iphone and it is on and it has not been restored, then you may be able to track it or wipe it.
    Otherwise there is nothing you can do but report it to the police and change your passwords.

  • Is it possible to use my music files in both my girlfriend's and my separate Itunes libraries through our seperate user accounts?? I want to import my music into her library with out copying the files onto my hard drive a second time....

    Is it possible to use my music files in both my girlfriend's and my Itunes library's through our seperate user account?  I want to import my music into her library without copying to my hard drive a second time.....

    Would any of these help you?:
    http://www.apple.com/itunes/inside-itunes/2011/05/two-ways-to-share-media-librar ies-through-itunes.html
    http://www.apple.com/itunes/inside-itunes/2011/01/keeping-multiple-itunes-librar ies-on-a-single-computerif-you-share-your-computer-with-others-and-you.html

  • Is it possible to use digital signature in Sales order of SAP B1 ?

    Hi Experts,
    Version: 8.81 PL07
    Cyrstal report Layout: 2011
    Is it possible to use digital signature in Sales order of SAP B1 ?
    Thanks in advance,
    Regards,
    Dwarak

    Hello
    Signature by scanned image is possible, you can create a function to do it. please note: images must be inside the reports, and hide them with a CR function.
    For certificate based sigbature of CR is not possible, you must develop an addon for that which is do this functionality.
    János

  • Using Webkit inside of AIR to load in PHP

    Hello,
    We have a game that we are developing for tablets that we are porting over from a browser based Flash game. In that game, there is a link to a PHP script that loads in player information and displays it on a web page. We would like to be able to reuse this functionality without having to rebuild it all in Flash for AIR. I know that AIR has Webkit support built in but I'm having a hell of a time finding out if it can display a web page from inside the application, rendered with PHP. Also I'm having trouble finding any information on how to actually use Webkit inside of AIR, other than an old mx:HTML component. Any help on this would be much appreciated.

    While it is possible to serve local html files to an instance of a StageWebView, it is not running as a server. Thus, your PHP code will NOT execute. You can display the html that lives on your server, since you are haing the user sign, some form of network access is need. You could look at using the SQLite DB to save the user information, so you could enable offline playability, then sync the data once there is a connection.
    Here is something I wrote on using SWV and Google Maps. Maybe you can find it useful: http://chrisgriffith.wordpress.com/2011/01/04/integrating-maps-into-your-mobile-applicatio n/
    Good luck,
    Chris Griffith

  • Is it possible to use  closures in java 1.6

    I wan to to use closures they reduce lot of time .I know I can write closures in other languages like groovy , scala etc.But I have troubles using these langauges , I am wondering if I can use closures inside my java files , is this possible?

    Not in 1.6.0 but you will be able to in 1.7.
    You can get a very similar effect using inner classes which have been available since 1.1.x

  • Is it possible to use JSF file as as error page.

    I am using jsf file as an error page.It is working in fine in websphere. But if i am using that only the exception is raised it is not going to error page.
    In Web.XML file,
    <servlet>
    <servlet-name>Faces Servlet</servlet-name>
    <servlet-class>javax.faces.webapp.FacesServlet</servlet-class>
    </servlet>
    <servlet-mapping>
    <servlet-name>Faces Servlet</servlet-name>
    <url-pattern>/faces/*</url-pattern>
    </servlet-mapping>
    <error-page>
    <error-code>403</error-code>          <location>/faces/unauthorized.jsp</location>
    </error-page>
    jsf codings are placed under *.jsp files. In the time submitting form data to server a method throws NumberFormatException. This exception information is displayed in console. but blankpage is coming . It is not redirected to error.jsp fle which is under faces/error.jsp.
    If i am directly giving /error.jsp then it is giving Faces context is not created error.
    So i tried use simple jsp(pure jsp) file wihtin the folder and i set path like /pages/foo.jsp. It is working.
    Tell me is it possible to use jsf as error page.

    What would you hope to do with the reference?  The Mathscript node doesn't have a file reading capability.  You need to read the file and pass the data into the Mathscript node.
    EDIT: I stand corrected.  You need to use the fopen and fclose functions inside of the MathScript node to be able to read a file inside of it.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines

  • Using cursor inside other procedure

    Hello,
    I have a question, i have a procedure that have several IN parameters and one OUT sys_refcursor. i need to call this procedure from other procedure, and i need to use the values that cursor have it inside, for example, my cursor have 5 columns with several IDs and i need to use this ID and send it like XMLtype.
    Is it possible to use the value from cursor??
    Thank you.
    Samm.
    Edited by: Samm on Mar 10, 2009 2:37 PM

    several variables?? how?
    create or replace procedure test_out (pOutValue OUT sys_refcursor)
    is
    begin
       open pOutValue for select object_id,object_name,.... from all_objects where rownum < 10;
    end;
    declare
       l_Cursor     SYS_REFCURSOR;
       l_Object_id  number;
      l_object_name varchar2;
    begin
       test_out(l_Cursor);
       loop
       fetch l_Cursor into l_Object_id *???????????!!!!!!!!!!!, how to fetch the object_name also?*
       exit when l_Cursor%notfound;
       end loop;
    end;Edited by: Samm on Mar 10, 2009 4:04 PM

  • Is it possible to use the case structure in on board progamming

    Hi
    I want to load a certain value in a variable in on board programming based on the encoder. How to implement this in 7344.

    No, it is not possible to use the labVIEW case structure in an onboard program. However, it is possible to implement the functionality you need by using a label, a jump to label on condition function and two on board variables. What you need to do is read the value of your encoder into one of the variables, once this value is in there you will use some of the variable arithmetic functions to compare its value to a value you would load into the second on board variable (the most common way is to use the subtract variables function). The result of the last varible operation is the used inside the jump to label on condition fucntion to evaluate the condition and to jump or not jump back to the label dependding on the result. For a much clearer explanation of this functional
    ity as well as some example code, please refer to chapter 15 of the following manual:
    http://digital.ni.com/manuals.nsf/websearch/EB609F​9BA065EA7A86256D350060C9A0?OpenDocument&node=13210​0_US

  • Is it possible to use a file refnum as an input of mathscript node

    Hi everybody,
    I just began to use LV and mathscript recently. One problem confused me a lot.  That is,
    Is it possible to use a file refnum as the input or output of mathscript node? A picture is attached for your reference.
    Thanks a lot!
    Gary
    Solved!
    Go to Solution.
    Attachments:
    Q-001.jpg ‏45 KB

    What would you hope to do with the reference?  The Mathscript node doesn't have a file reading capability.  You need to read the file and pass the data into the Mathscript node.
    EDIT: I stand corrected.  You need to use the fopen and fclose functions inside of the MathScript node to be able to read a file inside of it.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines

  • Is it possible to use ShowHandCursor property

    Hi,
    Is it possible to use ShowHandCursor property or set the
    buttonMode property in a TextField class?
    Thanks.
    Regards,
    AlexSon

    Dennis
    Thats brilliant I have included an extension to the vi (I am still using the sub vi you created)to read in a file and seperate the control data and have done it for more than just booleans. May be useful to others (it may not of course)
    Only one question has arisen from this, the value property node has to be run inside the case structure as when you try to take a line out of a case structure the little block on the wall of the structure takes a particular data type (i.e. string) and will not take mulitple data types I would really like to have the property node outside the structure as I can then make the whole thing in to a sub vi and have the node outside in the main vi.
    Anyone know how I can do this
    nice
    Attachments:
    Load Setpoint.vi ‏44 KB
    temp1.ini ‏1 KB

  • Is it possible to use wildcards to match cell contents in an if statement?

    I need to return a ID along with some other information on a page by page basis, so that the information comes out linked by position.  I use a couple of loops and if statements to navigate through the document.  I am able to use exact matches of cell contents which is fine when the contents doesn't vary.  But the IDs, though they have a similar pattern, are all different. In a menu driven search, I am able to find what I need with '150^9^9^9^9^9-^9^9^9' But when I try putting this (or any number of [0-9], *, ? combinations) it fails.  Is it possible to use wildcards?  The symbol used for the match (==) makes me suspect that it is not possible and that only literal, exact matches will work.  But I wanted to check with the experts before giving up.
    Thanks
    pcbaz

    Thanks for the input.  You're right, a GREP search is much more efficient.  But what I'm trying to do and the circumstances here don't allow me, I think,  to go that route. I am trying to generate a list of values coming from several textframes on a single page and have them come out so that I can tell which values belong together.
    I'm using an inherited document with masters that were created 'manually';  the index numbering for textframes and tables is random. I navigate through the pages, looping through textframe indices asking ' does this textframe exist?' If so, I ask if it is a table -- if no, it is a simple textframe and I ask about the ID, if yes, I ask if the contents of cell (0,0) (invariant position and contents) are equal to the table I want..  I am sending the ID and other pieces of information from the table to one row of a new table on a new page.  So the ID and other information from a single page are linked by being in the same row.
    I know this a little 'off-normal' -- I'm using the search to navigate through the document and find things by location the way you do with a spreadsheet.  I have devised a work-around that helps me get around the fact that the ID is not invariant.  I create a list of the (exact) IDs from another document, equating them to a variable ('a').  I then loop through the list of IDs and ask if the contents of the textframe is equal to 'a'..This works o.k, unless there happens to be an extra space, a different kind of hyphen, etc. It would be so much easier if I could use the wildcards that work in a menu-driven text or GREP search in script just to ask about the contents of the textframe.
    Thanks again
    pcbaz (Peter BIerly)
    P.S. we have since rewritten the masters so this problem will not exist in the future -- we now know exactly which textframe and/or table indices to refer to to get any particular bits of information and don't need to ask questions about the contents.

  • Is it possible to use a cable with two headphone jacks on either end and an electric guitar adapter to record in Garageband?

    Hey everyone,
    I got my Macbook Air (Mid 2013 model) last month and I want to record my acoustic-electric guitar on Garageband (which came with the Air). 
    I don't want to buy a guitar that has a USB. I have a cable with a 3.5 mm headphone jack on both ends like the one pictured here on this website http://www.bestdealaz.com/item.php?id=628 (i didn't buy it from this site though).
    I connected a 6.3 mm guitar adapter (http://www.ebay.com/bhp/headphone-guitar-adapter) to this cable. Then I connected one end of the cable to my guitar and the other end to the Headphone/Microphone jack on the left side of the MBA.
    I saw how other people were saying to go to System Preferences / Sound and then change audio output to audio input.
    I can't do that. I tried.
    Please help!
    Thank you.

    Hello Massimo Pascucci,
    The issue that you are facing when creating an endpoint with internal loadbalancer is the limitation of not allowing same ports to be listening under a single cloud service. This reason for this is that there is a limitation of only one private IP (Also
    known as the Internal load balanced IP) per cloud service.
    There is also a limitation on the Internal load balancer more than one port to be published per load balancer:
    You can leave your feedback by following the link below:
    https://social.msdn.microsoft.com/Forums/en-US/1805c5a0-3906-4cd6-8561-9802d77e0ae5/is-it-possible-to-use-both-an-ilb-and-an-elb-listening-on-the-same-port-in-the-same-azure-cloud?forum=WAVirtualMachinesVirtualNetwork
    Refer to this article for more information on Internal load balancer:
    http://azure.microsoft.com/blog/2014/05/20/internal-load-balancing/
    Thanks,
    Syed Irfan Hussain

  • I am using a mac mini 2011 an 3gs i phone 2010 macbook white 2008 and a new 2013 apple tv box. When i check info on the cloud I get 'upgrade your operating system to the latest. My question is is it possible to use the icloud system without an upgrade

    I am using a mac mini 2011 an 3gs i phone 2010 macbook white 2008 and a new 2013 apple tv box. When i check info on the cloud I get 'upgrade your operating system to the latest. My question is is it possible to use the icloud system without an upgrade

    iCloud requires OS X 10.7.2.

Maybe you are looking for