Is it possible to use my MacBook Pro to control audio playback on my iPhone?

I wish to use my iPhone as an audio source for my home hi-fi system, but would like the convenience of being able to select tracks, etc from my MacBook Pro
Previously I have used the "Remote" app to do the "opposite" (i.e. use my MacBook Pro as the audio source and use my iPhone as the remote), but if I could do it the other way around, it would mean I would still be free to use the MacBook for internet browsing etc, without needing to have it always connected to my hifi system audio out cable
Thanks guys, appreciate any help or ideas!
P.S. I don't think this second part would be possible - but also, can I use my MacBook Pro to control a digital radio app like WunderRadio or similar? (This question for bonus marks)

For anyone else interested...
After lots of googling, I have found that there are some iPhone apps that lets you do this:
Tunes Remote  (http://www.tunesremote.com/)
And Reverse Remote (https://itunes.apple.com/gb/app/id438057551?mt=8&affId=1736887)
I tried Tunes Remote which cost $1.99 and worked perfectly

Similar Messages

  • Is is possible to use the MacBook pro as a handsfree for the iPhone?

    Why we cannot control de iPhone using the MacBook pro?.
    It should be very easy, but it is not.
    I even can't pair my MacBook pro with my iPhone, see pic!
    I really do not understand why we can not use the MacBook bluetooth capabilities to make calls, answers calls etc.
    Apple let us use the Mac bluetooth capabilities to use and control our iPhone, it should be easy, also!

    You may think it should be easy, but in reality it is not.  Your MacBook Pro is not a dedicated handsfree headset, and it would take a considerable amount of effort to write the application code to create a program for your MBP to emulate one.  You can find any third party developer you like and convince them to create a Mac App for you which will provide you with a user interface on your Mac, and use Bluetooth to emulate a handsfree headset for your cell phone (it swouldn't even have to be an iPhone) and see just how much they want to charge you for such an application.  You might be surprised to see how high those numbers really are...

  • Is it possible to use a MacBook Pro 9.1 with Snow Leopard

    Hallo,
    i tryed out to install a macbook pro 9,1 with Snow Leopard, but by loading the drivers he stops with booting.
    The version i try out is 10.6.8 and i tryed to boot from an extern drive also with 10.6.8 with the newest updates.
    I hope to get some tipps i can try out.
    Thanks a lot!
    tony

    tony.scotto wrote:
    Hallo,
    i tryed out to install a macbook pro 9,1 with Snow Leopard, but by loading the drivers he stops with booting.
    The version i try out is 10.6.8 and i tryed to boot from an extern drive also with 10.6.8 with the newest updates.
    I hope to get some tipps i can try out.
    Thanks a lot!
    tony
    While the 2011 MBP's that shipped with Lion can be made to run Snow Leopard as long as you have the appropriate installer disk for 10.6.7 or later, yours is a 2012 MBP and most likely can never be made to run Snow Leopard because the necessary hardware support drivers (e.g., USB 3.0 support) simply aren't a part of that OS.

  • Using my macbook pro to send text synced to my iPhone 6

    how to send  a text on my Mac book Pro syncing it to my iPhone 6

    @Kevjuszac
    Use iMessage and FaceTime with multiple devices
    Sign in to an Apple ID on your iPhone. ...
    Tap an address to enable it on the device. ...
    If you don't want to use iMessage with your iPhone telephone number, tap Settings > Messages and turn iMessage off.
    You can sign in to the same Apple ID on another device.
    iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage - Apple Support

  • HowTo use a MacBook Pro outside in winter

    Hi,
    I know, I should use the MBP only, if the temperature is above 10 degree. But what can i do, if i should work with the MBP below 10 degree ?
    Exists there a warm-up case or something like that ?
    thanks for your help.

    Hi,
    thanks for your help. My problem is, I use the MacBook Pro to control a teleskope. the teleskop is outside, and the MacBook need to be outside too.
    So Is there some hardware equipment to warm-up my teleskope ?
    It could be some comercial equipment or some amateur tips. Everythings is ok
    thanks for you help

  • How Do I Use my MacBook Pro to Watch a DVD From External DVD Player

    Hello Everyone!
    While waiting for Apple TV to become available in my place of work, I want to use my MacBook Pro monitor for watching a DVD movie played on an external DVD player. The DVD player I have is an LPC-D1000, which is a new model. While Mac has its own DVD player, I'm trying to make use of my LG DVD player. If that's possible, please guide me on how to do it.
    Thank you.

    You could use Elgato Systems' EyeTV product to view external video sources on your MBP.
    There is additional cost involved, but it would achive what you want. You can buy the Hybrid product, and connect your external DVD player via Composite (red, white and yellow connectors) to your MBP via the EyeTV.
    http://www.elgato.com/index.php?file=products_eyetvhybridna&PHPSESSID=3c4e16afe5 0303162b285a6f70791f86

  • How do I use my Macbook pro retina display as a monitor for a PC?

    How do I use my Macbook pro retina display as a monitor for a PC?

    MacQueries wrote:
    How do I use my Macbook pro retina display as a monitor for a PC?
    Unfortunately, that is not possible. The computer only can "output" your display image, it cannot "input" an image from an external computer and display it on your MacBook's retina display.

  • Can I use my macbook pro mid 2012 as an external display using thunderbolt port

    Hi,
    I want to use my macbook pro (mid 2012) screen as an external display for a raspberry pi using a HDMI to Thunderbolt cable, via the thunderbolt port on the macbook pro. Would this be possible? Can the macbook pro's thunder bolt port act as an input and is any additional software required?
    I look forward to hearing from you.
    Thanks in advance!

    Welcome to Apple Support Communities
    You are referring to Target Display mode. Target Display mode can only be used in 27-inch iMacs and iMacs with Thunderbolt, not MacBooks Pro > http://support.apple.com/kb/PH11302
    Unfortunately, you can't use the MacBook Pro as a display. It doesn't support the monitor mode

  • I'm using a macbook pro with version 10.6.8 installed. whenever i try to install my software updates, it immediately asks me to restart my computer to finish the installation. after doing so and signing back on to my account no updates have been installed

    I'm using a macbook pro with version 10.6.8 installed. Whenever I try to install my software updates, it immediately asks me to restart my computer to finish the installation. After doing so and signing back on to my account, nothing has changed and no updates have been installed. It still says the same 8 items need to be installed, and the same process occurs again. Any idea how I can fix this?

    You have 10.6 on that machine, I suggest you stick with it for performance, third party hardware and software reasons as long as possible.
    Consider 10.8 (not 10.7) when it's released, because 10.7 and 10.8 will require a new investment in software and newer third party hardware as it requires newer drivers the old machines won't have. (forced upgrade because of software, really nice of them)
    http://roaringapps.com/apps:table
    Far as your Safari problem do these things until it's resolved:
    1: Software Update fully under the Apple menu.
    2: Check the status of your plug-ins and update (works for all browsers) also install Firefox and see if your problems continue. You should always have at least two browsers on the machine just in case one fails.
    https://www.mozilla.org/en-US/plugincheck/
    Flash install instructions/problem resolution here if you need it.
    How to install Flash, fix problems
    3: Install Safari again from Apple's web site
    https://www.apple.com/safari/
    4: Run through this list of fixes, stopping with #16 and report back before doing #17
    Step by Step to fix your Mac

  • Is it possible to upgrade a macbook pro 15 late 2008 memory upgrade to 8 go

    Hi from Belgium,
    Is it possible to upgrade a macbook pro 15 late 2008 memory from 4 to 8 go. And if yes would i have to replace both memory modules.
    I'm also experiencing problems with the battery. Could you tell me if the new replacement batteries are based on the new techonology (long lasting) or if the replacement battery will be the same as the original one.
    Thanks and have a good day.
    Francis

    Hi CMCSK and thanks.
    Maybe it's because of the SMC reset I've done.
    My computer wasn't responding to the power button when pressed and used to shut down unexpectedly so I did the SMC reset as per the procedure hereafter.
    http://support.apple.com/kb/HT3964?viewlocale=en_US
    So according to you, the battery seems to work properly and doesn't need to be replaced.
    Don't know if it's important but the figures I gave where the one with magsafe connected.
    In fact for the time beeing I only use my computer with magsafe plugged.
    I just unplugged the magpower and here are the new figures after 10 minutes.
    Charge Information:
      Charge Remaining (mAh):          3103
      Fully Charged:          No
      Charging:          No
      Full Charge Capacity (mAh):          3491
      Health Information:
      Cycle Count:          245
      Condition:          Normal
      Battery Installed:          Yes
      Amperage (mA):          -1431
      Voltage (mV):          11816
    Are these figures still ok ? Thanks for your help and have a good day.
    Francis

  • I use a macbook pro..My iPhone 4s refuses to be recognised by itunes even after I downloaded to updated itunes...what now?

    I use a macbook pro..My iPhone 4s refuses to be recognised by itunes even after I downloaded the updated itunes...what now?

    Hi Oneness1,
    Thanks for visiting Apple Support Communities.
    These troubleshooting steps can help if your iPhone 4S is not recognized by your MacBook Pro:
    Plug the device directly into a high-power USB 2.0 port on the computer. If possible, use a USB port on the back of the computer.
    Avoid plugging the device into a keyboard, display, or standalone hub. The USB ports on these accessories may be low-power or only offer USB 1.x connections.
    If you are using an accessory, remove the accessory and connect the device to the computer using only the Apple 30-pin to USB Cable or Lightning to USB Cable.
    If you have access to additional Apple 30-pin to USB Cable or Lightning to USB Cables, try testing with another if the first one doesn't work.
    Restart your computer and device. To restart your device:
    Hold the power button until "slide to power off" appears. Slide to power off your device. When it is off, press the Sleep/Wake button to turn it back on.
    Disconnect all USB devices from your computer, except for your keyboard and mouse. Then reconnect the iOS device. If the issue is resolved, reconnect other USB devices, testing after each connection.
    From:
    iOS: Troubleshooting USB connection
    http://support.apple.com/kb/TS1286
    Ensure that your Mac meets the minimum system requirements for your iPhone, iPad, or iPod touch.
    Install software updates on your Mac.
    Note: If an iTunes update is available, apply the update.
    Check USB connections. iOS devices require USB 2.0 to function properly. If you're not sure your Mac has USB 2.0 ports, refer to the computer's specifications.
    Disconnect other USB devices and connect your device directly to a USB port on your Mac.
    Restart your Mac.
    From:
    iOS: Device not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/ts1591
    All the best,
    Jeremy

  • Is there anyway to use the macbook pro as a moniter for a seperate device?

    Is it possible under a program of some sort to use the macbook pro's screen as a seperate moniter for a device because I am always on the go and I bring my macbook everywhere so it would be extremely conveniant if I could use it's amazing screen as a moniter for: dvd player,xbox,ps3,etc.

    darrylji wrote:
    if I could use it's amazing screen as a moniter for: dvd player,xbox,ps3,etc.
    Macbook Pro's have dvd players built in.  Is yours broken?  Yes, you can hook up an xbox 360 or a ps3.  google provides several articles and video tutorials on how to accomplish this.

  • Sound using my macbook pro in safe mode?

    Can i enable sound using my macbook pro in safe mode?

    About Safe Boot:
    http://support.apple.com/kb/ht1564
    OS X Mavericks: Start up in safe mode
    Starting up in “safe mode” may help you diagnose problems you’re having with your Mac.
    [Note: To print these instructions, open Help Viewer’s Action pop-up menu (looks like a gear), then choose Print.]
    Shut down your Mac and wait 10 seconds.
    Press the power button.
    Immediately after you hear the startup tone, hold down the Shift key. You should press the Shift key as soon as possible after you hear the startup tone, but not before.
    Release the Shift key when you see the gray Apple logo and progress indicator (spinning gear).
    To leave safe mode, restart your Mac normally without holding down any keys during startup.
    {The third-party utility scan you installed may be something (hard) to be rid of, too}
    You could try to boot into Recovery and use OS X Utilities, such as Disk Utility to
    repair disk permissions, and other things, to avoid initial startup in OS X itself:
    •About OS X Recovery:
    http://support.apple.com/kb/ht4718
    Good luck & happy computing!

  • How do I use my MacBook Pro to do video chat with my Gmail account

    I have a gmail video/audio chat account and would like to use my Macbook Pro as my communication device. I cann't seem to get the video portion going. Anyidea?

    You could use Elgato Systems' EyeTV product to view external video sources on your MBP.
    There is additional cost involved, but it would achive what you want. You can buy the Hybrid product, and connect your external DVD player via Composite (red, white and yellow connectors) to your MBP via the EyeTV.
    http://www.elgato.com/index.php?file=products_eyetvhybridna&PHPSESSID=3c4e16afe5 0303162b285a6f70791f86

  • How do i use Facebook in china using my macbook pro?

    how do i use Facebook in china using my macbook pro?

    Have a look to the right of this page under 'More like this'.
    Facebook may not be available.

Maybe you are looking for

  • Internet Explorer7 cannot display the Webpage in forms 10.1.2.3

    Hi all, I have installed forms 10.1.2.0.2 to my laptop under Windows Vista Home Premium and followed the following steps : 1- changed virtual memory to (minimum of 2048 and maximum of 4096) 2- I updated forms 10.1.2.0.2 it to forms 10.1.3 using pathc

  • After pacman kernel upgrade, modules won't load

    I can't seem to load any of my modules anymore, so I can't even get my network up (via_rhine).  I am posting this from a different computer. My uname -r says: 2.6.11.7-ARCH but my last kernel upgrade message in /var/log/pacman.log says: uprgaded kern

  • OMB in Oracle11gR1

    Hi all. I found that on OMB DB11R1, OMBINSTALL OWB_TARGET_USER was not there. It differs from OMB DB10g. What is the command that I should replace instead of this.... Thanks in Advance. Edited by: SwapnaPrerana on Nov 23, 2010 2:55 PM

  • Mapping middle key to command in a form

    hii, please help me to map middle key in handset to a specified command added in a form?

  • Changew with consolidate in iTunes 11.1.5.5

    Before I upgraded iTunes some days ago, all the songs where consolidated in W:\iTunes\Music\<Artist>\<Album> Now it goes in W:\iTunes\<Artist>\<Album> which makes it a lot more inconvenient to look for files in windows explorer. Any idea how I could