Is it possible to use the JAVA Report Engine SDK to modify DESKI reports?

Post Author: Nadine
CA Forum: JAVA
Hi, is it possible to add a complex filter to a DESKI report using the JAVA report engine sdk?
In the developer tutorials for this API, I've only found references to WEBI in terms of modifying reports, though it seems to be possible to view DESKI reports with this sdk.
I am a bit confused in terms of the scope of this API and how I would use it in regard to DESKI.
Many thanks for any suggestions!
Nadine

Post Author: Ted Ueda
CA Forum: JAVA
Current (XI R2) version of ReportEngine API only supports refreshing/viewing functionality for Desktop Intelligence documents. Document modification/creation is only supported with Web Intelligence documents. Queries aren't modifiable for Deski using ReportEngine API - you can only do so using Desktop Intelligence Reporter SDK, which is COM based.Sincerely,Ted Ueda

Similar Messages

Is it possible to use the JS coding in webdynpro java application!!!

Hi Experts,
Is it possible to use the JS coding in webdynpro java application by any means?
If yes, kindly suggest the procedure or any pointers for the same.
Thanks in advance.
Regards,
Anurag

Hi,
I'm not an expert in this matter, but I will post here what I know:
In NW7 releases (at least 7.01.05) it is possible to run JS, also to capture any WD Event and run your own JS code after that, using IFRAME. I have jQuery running here, it would take some time till you create a "framework" to enable some easy usage. I just want to highlight that is possible, thou I think it's a lot of effort.
Not sure about CE7.1 it seems iFrame is deprecated. Still, being deprecated should not "block" the usage, thou it's not recommended since this functionality can be removed in next releases.
I've read that CE7.2 has JS support, and I think you should try having a word with Armin maybe..
Hope it helps,
Daniel

Is it possible to use the value of a string to reference a component in the

I'm fairly new to Java so this may be a stupid question!
Is it possible to use the value of a string to reference a component in the code? For example in the code below, Wall is a class holding 3 different arrays. The Robot class has an array called finishBricks. When the buildWall method is run it receives the integers width and height which are used to construct the dimensions string. I want to use this string to then load the appropriate Wall array into the finishBricks array.
I hope this makes sense! Any help would be greatly appreciated!
class Robot {
public double[][] finishBricks;
public void buildWall(int width, int height) {
Wall w = new Wall();
String dimensions = "Wall" width "x" +height;
this.finishBricks = w.xxxx; // where xxxx is replaced by whatever the String dimensions is
class Wall {
     public double[][] Wall4x2 = {
          {-30.00,-01.60,27.45},
          {-30.00,-06.75,27.45},
          {-30.00,-13.55,27.45},
          {-30.00,-20.35,27.45},
          {-30.00,-22.00,28.65},
          {-30.00,-16.85,28.65},
          {-30.00,-10.05,28.65},
          {-30.00,-03.25,28.65}
     public double[][] Wall3x3 = {
          {-30.00,-01.60,27.45},
          {-30.00,-06.75,27.45},
          {-30.00,-13.55,27.45},
          {-30.00,-15.20,28.65},
          {-30.00,-10.05,28.65},
          {-30.00,-03.25,28.65},
          {-30.00,-01.60,29.85},
          {-30.00,-06.75,29.85},
          {-30.00,-13.55,29.85},
     public double[][] Wall2x4 = {
          {-30.00,-01.60,27.45},
          {-30.00,-06.75,27.45},
          {-30.00,-08.40,28.65},
          {-30.00,-03.25,28.65},
          {-30.00,-01.60,29.85},
          {-30.00,-06.75,29.85},
          {-30.00,-08.40,31.05},
          {-30.00,-03.25,31.05},

Map walls = new HashMap ();
walls.put ("2x2", new double[][] {
    new double[] {
        1,
        0
    new double[] {
        0,
        1
double[][] wall = (double[][]) walls.get ("2x2");

Using the Java APIs

I am attempting to use the java api in my reporting solution. The application that we are developing is using JSF and java. I wanted to keep the same look and feel for my reports.
First, I created a very simple rtf template in Microsoft word using BI Publisher Desktop. This simple template is just a table layout of data. No groupings. I created my datatemplate and ran the DataProcessor, the RTFProcessor, and FOprocessor objects. This worked correctly.
I next created another rtf template. This rtf template contains a grouping on Po_Number. I also modified my data template to group by Po_number. The DataProcessor and the RTFProcessor works fine. However, the FO Processor gives me the following message:
XDOException <Line 43, Column 93>: XSL-1015: (Error) Function 'current-group' not found.
However, I can successfully preview this template (with data) in Microsoft Word. Any ideas what may cause this.

It's either a template issue or your missing some jar files (probably jar files).
I would highly recommend you download the BIPublisherIDE. All this code and framework is already written and it's free!
http://bipublisher.blogspot.com/2008/03/bi-publisher-bipublisheride.html
Ike Wiggins
http://bipublisher.blogspot.com

Using the Crystal Viewer RDC with a business view report

Hi
Ive mananged to get the viewer working with crystal xi rpt files thru an odbc link to a sql database.
However I want to deploy the viewer for reports that use a business view. When I do this I get the invalid tlv record.
Is it possible to use the viewer in this way.
Thanks

Sorry there is no integration between the RDC and Business Views.
Since the RDC has been depricated in CR2008 this will not be availble in the future either.
Rob Horne<br /><a href="/blog/10">Rob's blog - http://diamond.businessobjects.com/robhorne</a>

Additional runtime license fees per user in order to use the Java connector

Hi All,
I have one question.
Do we require to pay additional runtime license fees per user in order to use the Java connector (Jco) supplied by SAP?
We're currently not using the Jco but are looking into the possibility of using it.
Thank in Advance.

Hi All,
Please answer my question
We need to use Jco to connect to our 4.6C SAP production system. We do not have Portal or any other components. It's just a plain 4.6C system, service pack level is 23.
We are currently paying license fees for using the system on a per user basis.
Thank You.

I would like to know if is possible to use the old iSight with my powerbook (mid 2009)?

I would like to know if is possible to use the old iSight with the macbook pro (mid 2009)?

Hi,
If the Mac has Firewire then you can use the External iSight
(Other readers
If you have Firewire 800 then you will need an adapter to use the Firewire 400 camera - Search for the word Adpater and see posts by EZ Jim for more details)
Don't daisy-chain the camera with Hard Drives
The camera only uses a data rate of 200Mbps and the differences in Hard Drive data speeds can be an issue.
The External iSIght should work no matter what Firmware is on there currently.
There is some evidence that having the 1.0.3 version (Open the System Profiler > Hardware > Firewire) on the device makes it more compatible/useable in later OS versions
The Updater is included in Tiger and Leopard.
Hard Drive/System/Library/CoreServices/iSight Updater/iSight Updater.app
An OS Update could "trigger" this to be run if you have Tiger
It can also be run as a Standalone.
It is Not present in Snow Leopard and although the documentation says this Firmware is an Audio update some people report that the camera needs the 1.0.3 Firmware to run.
(that could simply be the "Flashing" the Memory involved resets it enough to work)
10:22 PM Wednesday; June 8, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.7)
 Mac OS X (10.6.7),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

My I phone 4 is stolen in Vienna of Austria, unfortunately I have some very important photo inside the phone, would it be possible to use the IMEI no. to check where is the phone now? or you can lock i

my I phone 4 is stolen in Vienna of Austria, unfortunately I have some very important photo inside the phone, would it be possible to use the IMEI no. to check where is the phone now? or you can lock it / delete those information in the phone?
rachel

"would it be possible to use the IMEI no. to check where is the phone now?"
No.
"you can lock it / delete those information in the phone?"
No.
Apple can do nothing at all.
If you set up find my iphone and it is on and it has not been restored, then you may be able to track it or wipe it.
Otherwise there is nothing you can do but report it to the police and change your passwords.

I am using a mac mini 2011 an 3gs i phone 2010 macbook white 2008 and a new 2013 apple tv box. When i check info on the cloud I get 'upgrade your operating system to the latest. My question is is it possible to use the icloud system without an upgrade

I am using a mac mini 2011 an 3gs i phone 2010 macbook white 2008 and a new 2013 apple tv box. When i check info on the cloud I get 'upgrade your operating system to the latest. My question is is it possible to use the icloud system without an upgrade

iCloud requires OS X 10.7.2.

Is it possible to use the old iMac 2010 21inch as an external monitor for my 15inch Macbook retina?

Is it possible to use the old iMac 2010 21inch as an external monitor for my 15inch Macbook retina? E.g. Using a mini-display cable to connect from the imac mini display port to thunderbolt port on my macbook.

Apple shows only the 27" version supporting Target Display Mode.
<http://support.apple.com/kb/HT3924>

How to Use the JAVA SCRIPT code in .htm page of the component

Hi .
In my requirement i have to use Java Script Function in .htm code ..how to use the java script code and functions in .htm???
thank you
B.Mani

Check this document [Arun's Blog|http://wiki.sdn.sap.com/wiki/display/CRM/CRMWebClientUI-TalkingwithJava+Script]
Regards
Kavindra

Is it possible to use the Apple wireless keyboard with the iPhone 6? Will the Magic Mouse work with iMovie on iPhone6 Plus?

iPhone 6 page says that iMovie is a (free) application available for iPhone 6. When I use it on the desktop I need a mouse. Should I expect all controls to be touch-sensitive, or is it possible to use the wireless Magic Mouse? Similarly, if I want to type an email or a long document, is it possible to use the Mac wireless keyboard to enter text? With the iPhone 6 Plus taking over for laptops (phablet), it seems to me that input tools are relevant. Maybe what I'm asking is whether the iPhone6 (OS8) has drivers for these devices. Please advise.

Apps that are designed for iOS devices such as the iOS version of iMovie are intended to be used entirely by touch. It's worth noting that iMovie for iOS is not absolutely identical to iMovie for Mac OS.

My wife and I each have an apple ID and share one macbook pro. Is it possible to use the iCloud on our shared macbook pro and our two separate iPhone 5's and not get each others information confused?

My wife and I each have an apple ID and share one macbook pro. Is it possible to use the iCloud on our shared macbook pro and our two separate iPhone 5's and not get each others information confused?

Once you setup your wife's account you can enable fast user switching to make it easy to switch accounts:
OT

When using a personal dropbox account, is it possible to use the mapped drive without downloading all my dropbox files to my hard drive as well?

When using a personal (not business) dropbox account on my mac book pro, is it possible to use the mapped drive only? Currently I have dropbox mapped to my computer but it is also saving a redundant copy of the data on my hard drive. My goal is to pull, edit and save files on the mapped drive only without having a redundant back up of all my dropbox files on my computer wasting valuable storage space. Any advice out there? Thanks in advance for your help!

I don't believe that is accurate, but maybe I am missing something (I am not a Windows user).
Looking at 2 explanation of how to map a Dropbox as a drive…
http://lkeng.org/wp/?p=147
https://www.youtube.com/watch?v=5d8uvseVr5A
Both of those are linking to the 'local copy' of Dropbox. It is not a true 'network' drive as far as I can see (it still requires the local copy on the PC).
Another video suggests using another service to mount the Dropbox, but that is not using Dropbox anymore, it is going through Otixo…
https://www.youtube.com/watch?v=FAIpm2qmglU
Dropbox does not provide easy to use URL's to mount as a network disk so I don't think this is possible on OS X.
Dropbox's forum has this too…
https://www.dropboxforum.com/hc/communities/public/questions/202133795-How-to-ma p-dropbox-as-a-network-drive-on-Mac?loca…
You may need to examine the Windows computers carefully - if they have Dropbox installed & running then all the files are stored on the local machine in addition to the 'mapped drive'.
It looks to me like people are 'redirecting' the local copy to appear like a remote disk just so they can address that path on other machines - each PC is being setup the same. You could create aliases on OS X, but it doesn't help move files off the machine.
Hopefully someone else will contradict me, but I don't think this is how Dropbox works.

Is it possible to use the iPhone as a modem and pick up the internet ?

I wondered if it was possible to use the airport facility on an iMac G5 to pick up the internet from an iPhone placed near by ? THis would effectively make the iPhone a wireless modem ?
I've not got an iPhone yet and this would be really useful.
Thanks in advance.

The iPhone does not currently support tethering. There was an app that did that, but it was pulled from the App Store after only a few hours of availability, and all such apps have apparently been banned.

Is it possible to use the JAVA Report Engine SDK to modify DESKI reports?

Similar Messages

Maybe you are looking for