Is National Holidays supported for iCal? It would be nice if you new what holidays were coming up with just a glance. Like, what day is Fathers day on.
Is National Holidays supported for iCal? It would be nice if you new what holidays were coming up with just a glance. Like, what day is Fathers day on. You would think this would be basic for a calendar app.
Hi,
See this thread:
https://discussions.apple.com/message/15096802#15096802
Best wishes
John M
Similar Messages
-
So back in October, I purchased a brand new Macbook Pro Retina (MBPr), fully loaded with top of the line specs. I was soooo excited to have Thunderbolt 2 tech which Intel AND Apple describes as having DisplayPort 1.2a compatibility - which up to this point is unfortunately NOT the case. The point of the information/questions and requests in this article is to engage a conversation about the issues of not having MST support after Apple falsely mislead their consumers to think otherwise - especially when it is clear the MBPr is capable. Please read on...
Apple advertises that the Thunderbolt 2 ports on BOTH the MBPr and the new Mac Pro (NMP) will have 4K Display support with the famed 20gb/sec Ports (DisplayPort 1.2 only requires a little above 17gb/sec). Now that the 10.9.1 update has been released, we have failed to see MST or Multi-Stream Transport enabled on the MBPr Late 2013. Now, as for the New Mac Pro- it DOES have MST enabled in 10.9.1 with the AMD GPUs. For all of you out there that's questioning what this means, short answer is basically the Mac Pro will be able to power a 4K Monitor at 60Hz through the Thunderbolt 2 Port but the New MBPr is stuck with only HDMI 1.4 support which tops out at 4K 30Hz. 30Hz is unacceptable for anything but movies or a photo slideshow. At 30Hz the cursor will jump across the screen, eliminating any of the benefits of 4K.
BUT it gets worse...
Apple can be seen advertising that the new MBPr 15" model can power a 4K monitor THROUGH the Thunderbolt 2 Port here: http://www.apple.com/thunderbolt - This article quotes the following:
"Now with Thunderbolt 2 built into the new Mac Pro and MacBook Pro with Retina display, you can connect the latest 4K desktop displays and get double the bandwidth for your peripherals. And the two generations of Thunderbolt technology are compatible with each other."
Does this not let the consumer assume that the newest MBPr will be able to drive a 4K display through the Thunderbolt 2 Port? I would say yes it does, but at the time I wrote this, the TB2 Ports can't power a 4K display because, as previously stated, MST is disabled in Mavericks for the 15" MBPr Late 2013.
NOW, later on Apple posted the following article on 4K support here: http://support.apple.com/kb/HT6008
4K support on the MacBook Pro (Retina, Late 2013)
MacBook Pro supports 4K displays and Ultra HD TVs at the following resolutions and refresh rates with the built-in HDMI port:
3840 x 2160 at 30 Hz refresh rate
4096 x 2160 at 24 Hz refresh rate (mirroring is not supported at this resolution)
In the article above the New Mac Pro is listed as having support for a 4K Display with the Thunderbolt 2 Port (or MST DisplayPort 1.2a Technology) at 60Hz with no problem. This leads myself and many others to believe that MST will NEVER be enabled on the newest MacBook Pro Retina with Nvidia GPUs. Yes, 4K IS supported but ONLY through the HDMI 1.4 port, which has the limitation of only 30hz. This two-faced advertising is extremely upsetting to a LOT of people, including myself.
Interestingly enough, THIS IS NOT a hardware issue. If one ventures into Windows 8.1 via Bootcamp and connects a 4K Display via the Thunderbolt 2 (or through DP1.2) Port, the Display registers at 60Hz, thus proving that the Thundberbolt 2 Hub Controller is completely capable of MST DisplayPort functionality. Clearly this a driver issue with Apple, Nvidia or Intel or any combination. What Apple has done here is forcing any professional that desires stable and clear 4K technology through their MacBook Pro Retina to do so only using Windows 8.1 on their own machines! Definitely an oxymoron if you ask me...
Later on when the Mac Pro was ready for ordering, Apple placed the Sharp PN-K321 as a compatible option for a 4K Display. On the Store page featuring the (over three thousand dollar) Sharp 4K display, located here http://store.apple.com/us/product/HD971LL/A/sharp-32-pn-k321-4k-ultra-hd-led-mon itor?fnode=53 Apple states the following:
"Note that 4K DisplayPort operation is only compatible with the new Mac Pro (Late 2013)."
All of that being said, and I'm terribly sorry for my wordy ranting...
This brings me to a final two requests to ANYONE reading this post:
a) Has anyone working with the new 10.9.2 Beta Update seen evidence that DisplayPort 1.2 capabilities will be enabled for the new MacBook Pro Retina (Nvidia 750M) with the promised "Graphics Driver Updates" within the next Mavericks update?
and
b) To others that purchased or were/are thinking of purchasing a new MacBook Pro Retina with TB2 Ports: If you are just as upset as me about this crushing blow to consumers that just purchased a $3,000 laptop that were promised something that wasn't delivered - I urge you please, write to Apple and let them know they are making a mistake. You can do this though the support page or through http://www.apple.com/feedback
Thank you for your precious time, and if anyone has anything to contribute to this issue, please jump in....GOOD NEWS!
The Mavericks 10.9.3 update adds official support for Thunderbolt 2, 4K!
I'm not sure if you will be able to daisy chain anything to the 4K display. I've read that the design of Thunderbolt 2 includes support for DisplayPort 1.2 multi-stream (MST), which allows this type of daisy chaining with 4K, but we don't know if Apple has this supported on it's machines. Apparently it's been buggy in development because the graphics driver needs to work correctly with the Thunderbolt 2 host controller. I'm sure they will work it out if they haven't already.
The above is all via found information on this topic, but you can follow some more discussion here:
http://forums.macrumors.com/showthread.php?t=1713876
One more note on Thunderbolt worth sharing: always keep your fastest peripherals closer to the computer in the chain. If you have a TB1 device directly connected to the computer, anything further down the chain will be limited to TB1 speed/capability regardless of it's native speed. Always connect TB2 devices first, and save anything TB1 for the end of the chain. -
I purchased the Adobe pdf Pack to combine 50 PDF files to one and when I select them from my folder it claims "the files are not in a format supported for conversion to PDF". They already are pdfs, what am I doing wrong?
Moved to Adobe PDF Pack (read only)
-
How to configure Oracle National Language Support for Hindi
Hello
I am Working on one library project and right now it is in foxpro.
it is working in local(hindi) language using c-dec software.Now i want to run this project using oracle national
language support.i have done lots of rnd on that but till could not get success.what's wrong with that?
Following the step i am applied for that
1 I have create the database using in8iscii character set. Because In8iscii support the Hindi Language.
2 Set the variable NLS_LANG = hindi_india.in8iscii in environment. I am using the Windows 2000 OS because
it supports the Hindi font(Mangal).
3 I am using the Oracle Developer as front end so using mangal font in front end i am able to display data
in Hindi format that's why i am selected Windows 2000 os.
4 I have done the special setting in Windows 2000 for Hindi.it is in controlpanel-regional setting-click the indic option
for india and in input locals set keyboard layout as Hindi also.
5 I also changed the Init.ora file and add the NLS_LANGUAGE = Hindi
nls_territory = india. now, I opens the database using this Init.ora file.
6 But It can't display the data in Hindi format.I could not able to display the data in Front End also.
So,pls help me in Oracle and also guide me in Linux platform also.
nullHi Nimit,
I have tried inserting Hindi/Marathi into an Oracle database (I have tried versions 8.0.6 and 8.1.7).
I created the database using UTF8 character set. The NLS_LANG was set to AMERICAN_AMERICA.UTF8. Inserts into the database were via iSQL*Plus or import. For querying I used OCI and Pro*C. The data for my app is being served up as XML. I have not tried Developer. The DB platforms have been both HPUX and Win2K, while the client platform has been Win2K/IE5.5 SP2. I have been using Code2000 as the font.
Did you manage to view the stored data using the export utility ?
Also, you can try using yudit to edit unicode files on Linux. -
Now that AIR supports the MinimumOSVersion key, apps can set a specific minium version they will support. It wasn't available before, so it ended up in the app store with the default of 4.0.
Any device that AIR supported had to have ARMv7 anyways and I believe all ARMv7 iOS devices can update to at least 5.1.1, so would it be an issue with apple to drop iOS 4 support? Any device that could get the app before can upgrade to iOS 5+ for free to support it.
Only a small portion of people are still running iOS 4, and I get the feeling that most of those are folks with ancient ARMv6 devices that can't upgrade past iOS 4 and could never use the app anyways due to ARMv6. So why bother with testing for iOS 4 and possibly having to give iOS 4 related tech support?
If supporting 5+, is it a good idea to target 5.0 or 5.0.1 or 5.1 or 5.1.1 or what?Any of the non-user generated resources is in the tmp or Cache folders (which are not backed up) on mine, so that shouldn't be an issue in my case.
I looked at the wiki for iOS 5 and i didn't see any developer-related features other than that 'do not back up' thing that were added between sub-versions of iOS 5, so maybe I should target 5.0?
I'm still wondering, how do you handle dropping older versions of iOS? Surly developers can't be expected to maintain support for discontinued versions of iOS forever just because their app has been around for awhile? Apps eventually need to advance and use new OS features and require performance of current devices. Just set the MinimumOSVersion key to 5.0 or whatever and that's it? -
My mac is working fine. No noticeable problems. Then went onto netflix everything was working apart from the watching of the film and it popped up
"Video Playback Error Your device has a hardware issue, which is preventing Premium Video Playback. Contact Apple Support for more information. Error Code: S7363-1261-FFFFD000".
Not sure what is wrong but would appreciate any helpNetflix not working with yosemite
Re: I think there is a hardware issue with my computer and i am not sure what to do it won't let me play netflix
Netflix streaming gives Error Code: S7363-1261-FFFFD000 -
I am trying to install an app in my iphone. When I click Install, my old gmail account comes up for verification and it asks for my password etc. I dont use this account anymore and have a new gmail account that is associated with my apple account. How can I get the new gmail to default when I am trying to install apps?
Did you create a NEW Apple ID or did you change the email address for your OLD Apple ID? This will affect how you update apps in the future.
Anyway, go to Settings/iTunes&App Stores, log out, then log in with the new ID. -
When watching a podcast or tv program on itunes the video freezes and starts. The audio still flows just fine. Do you know what the solution might be?
set the wake-on lan on the main computer
The laptop's too far away from the router to be connected by ethernet. It's all wifi.
No separate server app on the laptop, it's all samba
The files are on a windows laptop and a hard drive hooked up to the windows laptop. The windows share server is pants, so I'd need some sort of third party server running. Maybe you weren't suggesting to use Samba to connect to the windows share though?
I'm glad that you've all understood my ramblings and taken and interest, thanks The way I see it, I can't be the only netbook user these days looking for this kind of convenience, and I certainly won't be once chrome and moblin hit the market.
Last edited by saft (2010-03-18 20:38:08) -
Why such poor support for iCal?
On the first two pages of this forum, only TWO questions are marked as answered (My own question has been viewed 36 times - no responses at all). Many of the questions refer to fairly serious 'buggy' behaviour by the iCal application. By doing a little Googling, I have found many similar complaints elsewhere, going back several years.
It seems that Apple has a rather unsatisfactory application here. Why is this not being fixed? Does anybody know of any impending major updates that will produce a calendar app without the kind of problems encountered on this forum?These forums are user-to-user. Apples involvement is limited to providing the platform and monitoring for adherence to terms of use (which your post probably violates!).
Marking of questions as answered is something that has to be done by the question poster. One of the great frustrations of answering questions here is that original posters frequently fail to give any feedback at all on answers, so other visitors don't know if the answer could help them, and the helper doesn't learn how to give better help.
As for unanswered questions, you must remember that the answerers are just ordinary users. If I, for example, had seen your original question, I would probably have decided not to answer it (I have now answered it with a request for further info) as I don't use invitations myself and so have limited knowledge with which to help you. If someone answers a question, and is not able to help, there is a smaller chance that someone who might know the answer will look at the question.
As for bugs, two points. First, there are millions of users for whom iCal performs satisfactorily. Second, this is not a bug reporting site, so if you don't use the OS X Feedback site, or better the developer site, it doesn't register on the developer's radar.
AK
Message was edited by: Austin Kinsella1 -
Shame I just took Apple Macs recommendations to upgrade to iOS7 pages don't open the same, graphics are inferior, applications do not auto rotate and therefore do not fit in the screen. That will teach me to trust the so called experts!
Jeeze you should of been there 15 years ago! Moving between apps was a real pain. Now I don't find it that bad at all. I imagine that part of the reason they don't combine all of the apps is because not everyone needs all of the features etc for every project, and combining them all would require a huge chunk of memory to run. I'd imagine it'd be pretty cumbersome as well.
But I do wish that they'd make things work the same way (drawing tools same in flash and illustrator for example) -
Scenario:
I'm using Illustrator and Edge Animation to build a project. I’ve created project assets in both applications and to do that I need to flip back and forth between applications. Cool. Let’s say I need to make a quick edit, so now, I need to fire up one of these applications to make a simple change. And that edit was aligning something to the left... I find this workflow very annoying.
Most of these applications have SIMILAR user interfaces, features and functions (e.g., align, Selection Tool, etc…), so why can't these features be rolled into one mega Adobe power house application. If you want to install more features/functions to your Adobe environment— it would be installed under the Workspace tab. This would save the trouble of having the user open and close programs to make quick edits. With Creative Cloud you would assume this would be ideal.
Does anyone else feel my pain? Or it’s just me…Jeeze you should of been there 15 years ago! Moving between apps was a real pain. Now I don't find it that bad at all. I imagine that part of the reason they don't combine all of the apps is because not everyone needs all of the features etc for every project, and combining them all would require a huge chunk of memory to run. I'd imagine it'd be pretty cumbersome as well.
But I do wish that they'd make things work the same way (drawing tools same in flash and illustrator for example) -
Help is needed i payed a lot for my purchases !!!
You can use multiple AppleIDs to purchase new music but you are limited as to how frequently you can change authorizations for re-downloading past purchases. It may well be a measure to deter piracy by stopping a group of people from going around to a friend's computer and downloading purchases on the other person's computer. It is easy to avoid by making sure you have backup copies on drives at home so you never need to redownload anything.
-
It would be nice if you could open a link in a new page in Safari
And/or save images from the web to your phone.
And/or have some form of Copy/Paste.Don't know about any change in the status quo for copy 'n paste or saving stuff locally, but opening links in new pages is addressed with a 'bookmarklet'. http://www.lifeclever.com/17-powerful-bookmarklets-for-your-iphone/
-
I have AE maps that have been added in this version - and for some reason the file will not export - what should I do - I need this out tonight
I have AE maps that have been added in this version - and for some reason the file will not export - what should I do - I need this out tonight
-
It would be nice if you were able to set gif's as your home screen or lock screen
Apple should create a new update to allow users to be able to set up gif's and videos as their home screen or lock screen . That would be a big hit !
Tell Apple.
http://www.apple.com/feedback/iphone.html
Maybe you are looking for
-
Problem with opening project in NetBeans 5.0
Hi, When i try to open an existing project in NetBeans 5.0 or try to add a new platform to a certain project, my computer is stack and i can't work with the NetBeans IDE ( i have to kill the process) How can i fix this problem?
-
Can't type in "{" in flash cs4
I´ve been having this problem ever since I installed flash cs4. I don't know if its because of the operating system or because of the keyboard, the only thing I know is that I can't type in any symbol that requires "ctrl+alt". I'm using a portuguese
-
How do I play my completed 3D movies created with CS5.5 and Cineform Neo3D?
I know how to display a video being edited with CS/Neo3D but how do I play it after the completed movie is rendered in its final form. I have not been able to verify that I can use Quicktime 7 and the FBX QuickTime Viewer Plug-in from Autodesk? I t
-
Using BT mobile simm in a tablet computer
Hi there. I am hoping that you might be able to help me. I have a BT dongle which works well on my laptop. I am thinking of buying an Android Tablet PC (possibly a Motorola Xoom) that can access 3G as well as wireless. My question is can I use the Si
-
Good morning, All: I am having to do a quick turn and burn on the use of the Oracle Report Bulder 10g with no prior experience. I am a Crystal Reports and somewhat Cosnos user. I have found the Oracle Report Builder to be pretty easy application to l