Is production version mandatory ???
Hi All,
1.Can some one please explain me what is the role of production version in PP (I know its a combination of BOM and work center)???
2. I heard in "discrete industry its fine with out prod version, but on REM its mandatory" , can some one justify this .
Regards ,
Reddy
Hi Reddy,
The Production version is used to define a number of Production options or ways, one can use different combinations say BoM- routing for discrete or BoM - routing- production line in case of REM. One can have one routing and different alternate BoMs maintained as Production Version. This will help him to create and schedule the Prod order based on the routing or BoM combinations suitable to his Production conditions in the form of Production Version.
You can refer the - http://help.sap.com/saphelp_46c/helpdata/en/89/a42403461e11d182b50000e829fbfe/frameset.htm
Regards,
AMol Kale
Similar Messages
-
Mandatory production version planned orders
Is it possible to block the launch of a planned order that does not contain a production version?
Hi
If you want block the field in order to prevent the user from inputting any values, you can also use the standard variant which can be created via transaction SHD0, this provides very filexible functionality what you want.
Steps.
1. Go to SHD0
2. Input the transaction code
3. Click the tab 'Standard variant'
4. Input the name of variant. e.g. Z123....please start with Z.
5. Click 'Create ' button F5.
5. Then the system will bring you to the transaction, please set the version as blank.
6. In the coming popup, please tick the check box 'W.content' in the
line for 'Production version'. if you hope protect this field you can also tick the 'Output only'.
7. Exit the transaction and save the variant.
8. Activate the stanard variant in SHD0, please note that this will be
valid for all users.
You can also control other transactions this way in SHD0 by creating
variants for them.
Best Regards.
Leon. -
Production version is not getting created using ALE-IDOC
Hi all,
Am using BD10 to transfer the material from sending to receving system.All the views are geting sent successfuly accept the production version tab data of MRP4 view.The segment is available in the standard IDOC.But prodction TAB is not getting created at receving system .Please help to resolve this issue.
Thank you.Hi Sanu,
BD10 Send Material..
the reason might be Production tab is not created is the segment is not a mandatory..
and the data is not populating for that fields.
if the segment is not madatorty and data is not available for the fields in the segment ..the prodction TAB will not be created ..
Regards,
Prabhudas -
Production version not found --rep. man.
Dear all,
when i am doing backflush through MFBF in repetitive man. i got below error.
Production version not found
Message no. RM149
Diagnosis
The system cannot find a production version with the data you entered.
Procedure
Check and correct your entries. Check especially whether the production version is valid on the defined posting date.
A production version must exist for a reporting point backflush in particular.
plz guide me .Hi,
It seems Production version is not maintained. For REM production version is mandatory.
Go to Matrial master MRP 4 view click on production version...pop up screen appears..enter the version number 0001 valid from and valid to.and click on details.
Enter lot size if u have maintained any.
Select rate routing under rate based planning and enter the group counter.
Select BOM
Check REM allowed, enter the production line, enter the issuing and receving location.
click on check..green light will be displayed..if it is not displayed check the dated u have entered and correect the same...if green light is displayed production version exists...
Try and come back...
Awd if helpful
Ramagiri -
Regarding the KEY DATE OF PRODUCTION VERSION
Dear Guru's
Client facing a issue like :
They have master recipe which was created on say example: 01.01.2001 and they had changed "activity type" activity time" later on date for particular Production version P001. & obviously Production version Valid from date is on 01.01.2001.
But if he check the key date of particular version(P001), it shows the same date as 01.01.2001 & it will show only the recipe which was created on 01.01.2001.
It is not showing any other changes which we did after 01.01.2001
While transferring to APO, system is picking the Production version (P001) based on the key date 01.01.2001 & they are not getting the changes in that recipe while creating the order
How can we resolve this issue Plz help.
Thanks & Regards,
Arvind SThanks Krishnan,
But when I createa new formular variable, I have lots of options for varaibles.
So, in the formula screen.
Formula variables->New Formula variable - > Edit
Then
Processing by ->Replacement path ->ref characteristic date
Then, on the replacement path tab:
Replace variable with ->variable.
Click on the box to search available variables to replace, and I have lots of options e.g.
Current fiscal year (single value entry, mandatory)
Approver
Base budget
etc.
but not "key date of the query". It is not there?
Any more help gratefully appreciated. -
Creation of inspection lot 04 depending on production version
Hi Experts,
could you tell me if it is possible to create a Good Receipt inspection (lot origin 04) depending on the production version used ?
My material has 2 production versions:
0001 - production with process order
0002 - production with repetitve manufacturing
When I do a GR on process order, I do not want to create an inspection lot 04.
When I do a GR on product cost collector, I want to create an inspection lot 04.
As I have entered inspection types in material master data, I do not know how to do the distinction ?
Thanks in advance for your help
Best regards
AmauryHi
Check user exit
QBCK0003 |Extended QM check for goods receipt
Regards
Sujit -
ISSUE:regarding production version tab of MRP4 of data transfer using BD10
Hi all,
This is regarding production version tab of MRP4 of data transfer using ALE idoc (BD10).
When i transfer the data using BD10 the production version is received at receiving end through segment
but not created in MRP4 view tab.An error is coming as-
"You wanted to maintain the master record of the material AB_06.04.09(2). However, it is already being processed by the user EBGABAP and is therefore locked."
I logged in as-EBGABAP
Please help me resolve the issue.
Thanks
Edited by: sanu debu on May 6, 2009 11:08 AM
Edited by: sanu debu on May 6, 2009 11:09 AM
Edited by: sanu debu on May 6, 2009 11:11 AM>
sanu debu wrote:
> Hi,
> I have to upload production version tab data of MRP4 view(MM01).Please suggest a function moduleor bapi for the same.
>
> Thanks.
>
> Edited by: sanu debu on May 6, 2009 3:24 PM
BAPI_MATERIAL_SAVEDATA can be used, populate the respective fields in input parameter PLANTDATA -
There is already a transaction for the systems of this product version(MOPZ)
Hello All,
I am trying to configure maintenance optimizer in Solution Manager 7.0
on Windows 2003 server and SQL 2005 server.
I am configuring this for SAP CRM 2007 server.
Created the server, database and system in SMSY
Created Logical Component in TA code SMSY
SM59 connection for SAP-OSS is OK.
S-User is assigned to a User.
Created a solution using TA code solution_manager.
Defined the product version for the solution created in the TA code
solution_manager.
When creating a Maintenance Optimizer transaction, I select the
product version and its logical component in the Plan Maintenance
(Phase) and click on Continue to go to Select Files Phase, I get below
warning:
Information Procedure 8000000130 Saved
Warning: Status was reset by system
Warning: There is already a transaction for the systems of this
product version
I cannot get pass this phase.
I have deleted and recreated the solution, carried out the same
activity again but its giving the same Warning
Warning: Status was reset by system
Warning: There is already a transaction for the systems of this
product version
Any help will be appreciated???
Regards,
Satish.Hello Ragu,
Thanks for your response.
As of now, we do not have ChaRM in place. Secondly, we use a single customer number.
I would like to let you know that in our landscape we have two CRM server, one ECC sever, one SOLMAN7.0 server.
I tried to configure MOPZ for CRM, ECC, SOLMAN server to download the respective STACKS.
I was successful in configuring CRM and SOLMAN.
But when I tried to configure in ECC, it failed due to RFC erros.
So I deleted the transaction for the ECC system and deleted the system itself in Solution Manager.
Reconfigured the Systems in "SMSY", RFC connections are correctly defined to configure MOPZ between SOLMAN7.0 and ECC6.0.
When I start configuring the MOPZ, I cannot get pass the first phase and this is when I get an error: There is already a transaction for the systems of this product version.
Please let me know if you need further information.
Regards,
Satish. -
Costing variant and production version
We have two costing variants "C" (used to create current cost estimates) and "F" (Used to create Future cost estimate). All of the production versions in the system have a validity date of 9999. Is there a way to tell the system to use one production version when costing using Variant C and another version when costing is done using variant F.
Or if that is not possibel than how do we use one production version in 2011 while recosting current standards and another production version in 2012. (Remember the production version that we are using currently in 2011 has a validity date of 9999)
RegardsHi
In your Costing Variant - You have a tab callled "Qty Structure Control".... Here you can specify BOM Determination and Routing Selection id.... i.e. If the BOM / Routing attached to the prod version can be assigned a specific BOM Determination Class and Routing Selection id, it can work
OR ELSE
While doing CK11N, you can manually specify the Prod Version in the "Qty Struct" Tab..... Create an LSMW for CK11N and you can do a mass costing like CK40N.... CK40N does not have this option of specifying Prod Version
I would prefer 2nd option
Br, Ajay M -
QC Activity based on Material Production Version
Hi,
Normally, we perform QC activity based on Material Code, i.e. in Material Master we maintain inspection type in QM View for material which needs QC activation during Good Receipt from Production
Is it possible to perform QC Activity based on Production Version of a material i.e.
For Example
Product A having 2 Production Versions
IF Product A with Production Version 1 then No QC required during goods receipt from production
IF Product A with Production Version 2 then QC required during goods receipt from production
So please tell me what feasible solution possible from your side
With Regards,
Kunal ShethDear Sap User,
Production version is nothing just a combination of Master recipe/Routing and BOM used for particular production or process.
If you are having so many production version then you have to choose which you want to choose but if you are having a single production version then it will be chosen automatically.
Do it once and revert in case of any query.
Rgrds,
Dheeraj Rawal
Edited by: Dheeraj89 on Feb 9, 2012 6:13 AM -
Production Version of Co Product
Hi,
I have got one main product and one co product. Main product has got many Production Version based on lot size. When I do costing for the main product ,it picks the right PV based on the lot size. But in case of co product costing it picks the first PV of main product only irrespective of lot size. Why ?
Shahnawaz>
Shahnawaz Farooqui wrote:
> Hi ,
> I am not maintaining separate BOM for co product . As mentioned in my question it is when I am doing the costing for Co product it is picking the wrong PV of main Product.
>
> Shahnawaz
Shahnawaz,
Why you are doing seperate costing for CO-Product, when you do costing for main product it should do cost roll-up for the co-product also. Please check
Regards,
Prasobh -
Different fix lot size depending on the production version
Hi all,
I have the next scenario:
2 production versions. 2 different fix lot size por each. So:
Prod Version 1 - Fix lot size 200
Prod Version 2 - Fix lot size 300
I created the Quota Arrangement just to make SAP to take my favourite version. And trought the quota, I can define the lot size for each version. BUT.
If I change the version in the order or in the planned order, the quantity don't change.
So: How can I manage 2 different fix lot size for 2 different product versions? If I change the version once the order is created, how can I do the system change de quantity to the right one?
Thanks in advante
<< Please do not offer points >>
Edited by: Rob Burbank on Oct 1, 2010 2:53 PMI have n't tried this scenario,
This is my Idea
Create a two production version
for ex: lot size 100 to 1000, set the rounding profile qty as 1000
for lot size 1001 to 99999, set the lot rounding profile value to 5000
BY this way u can get the two lot based on the rounding profie
Expert; please correct if i am wrong
Edited by: Sundaresan . E. V on Oct 1, 2010 4:12 PM -
Change Production version during creation of Process Order COR1
Hi,
Scenario:
Based on the entered Material, Plant and Order type system need to trigger a popup asking the user to select the Production Version. This should happen before clicking on SAVE button, so that all the values will be populated correctly based on the changed VERID.
I did not find a user exit that enables to change the Production Version (VERID) value. So I thought of displaying the popup in the user exit EXIT_SAPLCOZF_003 which will be triggered before initial screen appears, export the selected value and pass it to a User Exit or BADI where VERID can be changed. But cannot find a user exit to do it.
Please help me find a User Exit or BADI to change the Production Version during creation of Process Order using COR1 transaction before clicking on SAVE button.
Thanks,
Manoj.Hi Manoj,
So - almost four years later - I saw your post and I saw myself in the very same situation as you did...
I found a solution for those who wants to change the production version of the production order from the sales order creation: create an enhancement in the function module 'MD_VERSION_SELECTION' and you are good to go. -
Transfer of Production Version
Hi Gurus,
i am trying to transfer the Production Versions of a Material to an other System via IDoc. I am using BD10 for transfering.. The relevant Segment E1MKALM in MATMAS05 is filled with all data from the source. But in the Target Systen tge Production Version is not added (Material exists already in Target system, only addition is needed).
what am i am doing wrong? The Segment E1MKALM is directly for Production Version, but why this is not used in the target system? There are no errors in BD87 when i process the IDoc.
any Ideas?
Best Regards
Udono answered but i dont want this question to hang in ....
-
BAPI/Function module for production version tab data of MRP4 view(MM01).
Hi,
I have to upload production version tab data of MRP4 view(MM01).Please suggest a function moduleor bapi for the same.
Thanks.
Edited by: sanu debu on May 6, 2009 3:24 PM>
sanu debu wrote:
> Hi,
> I have to upload production version tab data of MRP4 view(MM01).Please suggest a function moduleor bapi for the same.
>
> Thanks.
>
> Edited by: sanu debu on May 6, 2009 3:24 PM
BAPI_MATERIAL_SAVEDATA can be used, populate the respective fields in input parameter PLANTDATA
Maybe you are looking for
-
Test if interval is set properly in DBMS_JOB .
Hi, looking for a way to test interval setting in some complex cases . Its obvious when You have DBMS_JOB.SUBMIT ( :jobno , 'p;' , TRUNC(sysdate)+11/24 , 'TRUNC(SYSDATE+1)+11/24');but what if You want interval depend on day
-
Can I mirror my computer screen on my iPhone using a cable?
Is there a way to mirror my MacBook Pro's screen on my iPhone using a cable? I know there's VNC and Splashtop, but I'm looking for a solution with zero latency, as I'm making an Oculus Rift clone. I have seen this done once before but I'm not sure ho
-
FCP 5.0.4-5.1 upgrade necessary for PPC?
When Apple released the upgrade from 5.0-5.1, they marketed it as a "crossgrade" to a Universal app. I ignored this announcement because I'm on a PowerBook G4. However, with the latest announcement of the update to 5.1.3, I think I'm realizing that A
-
HP HDX16 Screen Problem (Fuzzy, blurry, flickering)
So, I'm having some issues with my HDX which has been flawless. It'sjust over 18months old. One day all of a sudden the screen went fuzzy. I noticed when I bring the screen down (toward closing position) it then sharpens up and goes back to normal bu
-
CRIO 9076 internal block diagram?
Hi guys-- I'm trying to work up a document on our cRIO 9076 for the lab, and I'd like to include a schematic/block diagram of its overall internal structure...something like what PC motherboard makers give (example below). The internals of the RT co