Is Section Formatting Conditional on which Section Appears Next possible?

How can I make the formatting of a section conditional on if the next section that appears is from the same or the next level group?
I have a footer from group 2. I want to add a page break after the footer IF the next section is not group 3's footer. Is that possible?
I tried using Section Expert > Paging tab > selected "New Page After"...but I just dont know what formula to put in the Format Formula Editor. Any suggestions?

I would think that you can use the NextValue() function to determine if you are at the end of Group 3, and if so, do the page break.
HTH,
Carl

Similar Messages

I just upgraded ITUNES (11.0.4). When trying to sync my Mac Air to my iPad, the screen and typography sections appear in black

I just upgraded ITUNES (11.0.4). When trying to sync my Mac Air to my iPad, the screen and typography sections appear in black

This is a copy of my screen:
Thanks,

How to change the header and footer in the Section Breaks Next Page using OpenXML?

I have a word document file in which I added a Section Break of Next Page, now I want to change the header and footer of that page.
Scenario of example, I have a doc file which has four pages with headers and footers and added fifth page in the section break next page, I want to change the header and footer of the fifth page only. This is achievable manually by deselecting the Link to Previous
button in the Word Application but I don't know how to change it using XML?
My code that adds the new page in the section breaks is:
class Program
static void Main(string[] args)
string path = @"C:\Riyaz\sample.docx";
string strtxt = "Hello This is done by programmatically";
OpenAndAddTextToWordDocument(path,strtxt);
public static void OpenAndAddTextToWordDocument(string filepath, string txt)
using (DocX document = DocX.Load(@"C:\Riyaz\sample.docx"))
document.InsertSectionPageBreak();
Paragraph p1 = document.InsertParagraph();
p1.Append("This is new section");
document.Save();
Please help.

Here is the sample for your reference:
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using DocumentFormat.OpenXml;
using DocumentFormat.OpenXml.Packaging;
using DocumentFormat.OpenXml.Wordprocessing;
namespace WordAddNewFooterHeader
class Program
static void Main(string[] args)
string path = @"E:\Document\TestHeaderandfooter-Copy.docx";
string strtxt = "OpenXML SDK";
OpenAndAddTextToWordDocument(path, strtxt);
public static void OpenAndAddTextToWordDocument(string filepath, string txt)
// Open a WordprocessingDocument for editing using the filepath.
WordprocessingDocument wordprocessingDocument = WordprocessingDocument.Open(filepath, true);
MainDocumentPart part = wordprocessingDocument.MainDocumentPart;
Body body = part.Document.Body;
//create a new footer Id=rIdf2
FooterPart footerPart2 = part.AddNewPart<FooterPart>("rIdf2");
GenerateFooterPartContent(footerPart2);
//create a new header Id=rIdh2
HeaderPart headerPart2 = part.AddNewPart<HeaderPart>("rIdh2");
GenerateHeaderPartContent(headerPart2);
//replace the attribute of SectionProperties to add new footer and header
SectionProperties lxml = body.GetFirstChild<SectionProperties>();
lxml.GetFirstChild<HeaderReference>().Remove();
lxml.GetFirstChild<FooterReference>().Remove();
HeaderReference headerReference1 = new HeaderReference() { Type = HeaderFooterValues.Default, Id = "rIdh2" };
FooterReference footerReference1 = new FooterReference() { Type = HeaderFooterValues.Default, Id = "rIdf2" };
lxml.Append(headerReference1);
lxml.Append(footerReference1);
//add the correlation of last Paragraph
OpenXmlElement oxl = body.ChildElements.GetItem(body.ChildElements.Count - 2);
ParagraphProperties paragraphProperties1 = new ParagraphProperties();
SectionProperties sectionProperties1 = new SectionProperties() { RsidR = oxl.GetAttribute("rsidR", oxl.NamespaceUri).Value };
HeaderReference headerReference2 = new HeaderReference() { Type = HeaderFooterValues.Default, Id = part.GetIdOfPart(part.HeaderParts.FirstOrDefault()) };
FooterReference footerReference2 = new FooterReference() { Type = HeaderFooterValues.Default, Id = part.GetIdOfPart(part.FooterParts.FirstOrDefault()) };
PageSize pageSize1 = new PageSize() { Width = (UInt32Value)12240U, Height = (UInt32Value)15840U };
PageMargin pageMargin1 = new PageMargin() { Top = 1440, Right = (UInt32Value)1440U, Bottom = 1440, Left = (UInt32Value)1440U, Header = (UInt32Value)720U, Footer = (UInt32Value)720U, Gutter = (UInt32Value)0U };
Columns columns1 = new Columns() { Space = "720" };
DocGrid docGrid1 = new DocGrid() { LinePitch = 360 };
sectionProperties1.Append(headerReference2);
sectionProperties1.Append(footerReference2);
sectionProperties1.Append(pageSize1);
sectionProperties1.Append(pageMargin1);
sectionProperties1.Append(columns1);
sectionProperties1.Append(docGrid1);
paragraphProperties1.Append(sectionProperties1);
oxl.InsertAt<ParagraphProperties>(paragraphProperties1, 0);
body.InsertBefore<Paragraph>(GenerateParagraph(txt, oxl.GetAttribute("rsidRDefault", oxl.NamespaceUri).Value), body.GetFirstChild<SectionProperties>());
part.Document.Save();
wordprocessingDocument.Close();
//Generate new Paragraph
public static Paragraph GenerateParagraph(string text, string rsidR)
Paragraph paragraph1 = new Paragraph() { RsidParagraphAddition = rsidR };
ParagraphProperties paragraphProperties1 = new ParagraphProperties();
Tabs tabs1 = new Tabs();
TabStop tabStop1 = new TabStop() { Val = TabStopValues.Left, Position = 5583 };
tabs1.Append(tabStop1);
paragraphProperties1.Append(tabs1);
Run run1 = new Run();
Text text1 = new Text();
text1.Text = text;
run1.Append(text1);
Run run2 = new Run();
TabChar tabChar1 = new TabChar();
run2.Append(tabChar1);
paragraph1.Append(paragraphProperties1);
paragraph1.Append(run1);
paragraph1.Append(run2);
return paragraph1;
static void GenerateHeaderPartContent(HeaderPart hpart)
Header header1 = new Header();
Paragraph paragraph1 = new Paragraph();
ParagraphProperties paragraphProperties1 = new ParagraphProperties();
ParagraphStyleId paragraphStyleId1 = new ParagraphStyleId() { Val = "Header" };
paragraphProperties1.Append(paragraphStyleId1);
Run run1 = new Run();
Text text1 = new Text();
text1.Text = "";
run1.Append(text1);
paragraph1.Append(paragraphProperties1);
paragraph1.Append(run1);
header1.Append(paragraph1);
hpart.Header = header1;
static void GenerateFooterPartContent(FooterPart fpart)
Footer footer1 = new Footer();
Paragraph paragraph1 = new Paragraph();
ParagraphProperties paragraphProperties1 = new ParagraphProperties();
ParagraphStyleId paragraphStyleId1 = new ParagraphStyleId() { Val = "Footer" };
paragraphProperties1.Append(paragraphStyleId1);
Run run1 = new Run();
Text text1 = new Text();
text1.Text = "";
run1.Append(text1);
paragraph1.Append(paragraphProperties1);
paragraph1.Append(run1);
footer1.Append(paragraph1);
fpart.Footer = footer1;
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Condition Type VPRS not appearing on some billing items

Hi,
I have a discrepancy between COPA and postings on the FI account. In COPA in transaction ke4i I have assigned the SD condition type VPRS - Internal price to the COPA value field VRPRS u2013 Stock Value.
The problem arises when the outbound delivery is split on several batches. In this case the condition type VPRS does not appear on the invoice for the split billing item and the amount 0 is loaded into to the COPA filed VRPRS for this billing item instead of value that should appear in the VPRS field. And this causes discrepancies between COPA and FI.
Do you know how to solve this problem? Is it possible to make the condition type VPRS always appear on the invoice, also in case when the delivery is sent in many batches?
Best regards,
Marcin

Hi
Welcome to the confusing world of Invoice *** batch split.. The situation you are facing is due to incorrect customization of your position types in SD during billing of the batch split. Plz check note 77414
You can grossly summarize it as below -
When you have batch split - the line items in Out bound delivery and biling can be divided into 2 types HPOS and UPOS i.e. Main Line items and Sub line items.. The note describes of 3 situations.. Your SD consultant will have to decide which situation you fall in... based on that config changes have to be made in SD....
If your billing is done at HPOS level (Main Item) and not at Item splits level or Vice Versa - Then T codes VOV7 and VTFL, you have to make settings accordingly in the fields "Biling Relevance" and "Cost"..
Also, the item category of HPOS and UPOS has to be different - One has to be relevant for billing/Cost and the other not
Apart from VOV7 and VTFL, check your settings in T code 0184.. Your Item catg has to be assigned against :
Delivery Type / usage Type= CHSP/ Item category Group = "Norm"
To correct the invoices already posted, cancel them and repost after making the config changes...
Regards
Ajay M

I would like to transfer movies from my Mac (avi format) to ipad2 which I think supports MP4 files. How do I transfer.

I would like to transfer movies from my Mac (avi format) to ipad2 which I think supports MP4 files. How do I transfer. There are so many softwares available on the web but none that can be downloaded on to the iMAC.
Please Help

iPad Supported Video Formats & Movie Formats
H.264 video up to 1080p, 30 frames per second, High Profile level 4.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format
You can use a USB flash drive & the camera connection kit.
Plug the USB flash drive into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov).
Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import.
 Cheers, Tom

Report with custom layout - formatting conditions

Hi,
There's a report with custom layout. What I need is to format some cells depending on the data they contain(like different background color). There's a tab named "Formatting Conditions" which should be meant for doing this and it works perfectly when report has tabular layout. But nothing happens in case of custom layout. Should this be done then in the "Report Layout Editor" and with Javascript? Portal version is 3.0.9.8.0.
Thanks in advance,
Madis

Hi,
Some condtions like background color do not work in custom mode reports. This is because in case of custom reports the table html is specified by the user and the report renderer has no control over it.
Hope this helps.
Sunil.

Programatically adding Format Conditions

I understand that Access 2013 will allow up to 50 conditional formats on each control. However when I try adding more than 3 programmatically using [Control].FormatConditions.add I get
Run-time error '7966': The format condition number you specified is greater than the number of format conditions.
The error doesn't occur with FormatConditions.add but occurs when I try assigning one of the formats (in my case .BackColor)
Is there a fix for this issue?
Kind Regards
Paul

Hi Paul Simpson.
>>I don't get an error when adding more than three in vba, Only when I assign formatting later to one that is more than 3 that I get the error as per example<<
I am trying to reproduce this issue however failed. And based on the error message, it seems the index of formatconditons collection is incorrect.
Here is the code test to add a condition format and set its back color programatically. The code works well for me:
Sub SetCondiditonFormat()
Dim aTextBox As TextBox
Set aTextBox = Application.Forms("table10").Controls("Name")
Set ofc = aTextBox.FormatConditions.Add(acFieldValue, acEqual, "Jack4")
ofc.BackColor = RGB(0, 255, 0)
End Sub
And if I get the format condition with a incorrect index(40 which is greater than the max index value), I would get the same error message:
Sub SetCondiditonFormat()
Dim aTextBox As TextBox
Set aTextBox = Application.Forms("table10").Controls("Name")
aTextBox.FormatConditions(40).BackColor = RGB(255, 0, 0)
End Sub
Would you mind sharing with us a demo to help us narrow down this issue? You can upload it via OneDrive, and please remove the sensitive information before you uploading.
Regards & Fei
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Condition Type Doesn't Appear in COMMPR01

Hello CRM Pricing Experts,
I have created a custom pricing procedure called Z00001. This pricing procedure has a custom condition type called ZPR0. This in turn is based on a custom access type ZPR0 (Access=5, Table=SAP00080,E=checked, requirement=0.......based on the product).
I have also maintained the pricing procedure with Distr Channel 10 (no division, no customer proc etc.) "Determination of Pricing Procedure".
The problem is that when I create a material using COMMPR01, the new condition type doesn't appear as a valid condition type on the Conditions tab's Item Area.
What could I be missing?
I'd appreciate your help.

Thanks for your reply.
I followed the instructions you mentioned. It dawned on me that I can only have 1 entry for application CRM. This seemed like a big change so I decided not to change this and leave the CRM-> Condition Maintenance group setting as CRM->PRODUCTPRICES.
I do have one follow-up question:
Within the same screen (condition maintenance), what is the purpose of Product Category folder on the left pane. I see an entry there for CRM ->PRCAT_CRM. What does this mean? Do I have to add my item category here? Or is this something different?
Thanks
Edited by: Jamal Kazmi on Aug 29, 2009 9:18 PM

Condition tab is not appearing at item level in CRM 5.0 IDES

Hi,
I am trying to create Sample order in CRM ides but condition view at header level is blank and at item level condition view is not appearing.
I have maintained condition record for condition types and it is visible in Material master. And correct pricing procedure is picked in sample order as I can see this in Header overview.
I checked pricing procedure its correct. What else I need to check?
Thanks for your reply.
Nishith

Hi Nishith,
You can check if the item category is pricing relevant - field PRICING_RELEVANT in view CRMV_SALES_ITEM.
Hope this helps,
Kind regards,
Vanessa

Special G/L transaction which only appears on the exceptions list in F110

Hi All,
While run payment program by F110 for some of the documents are getting not posted due to the error log 017-Special G/L transaction which only appears on the exceptions list. Can anyone tell me to remove the error log and post the same.
Thanks...

Dear
As Xing said,kindly reomve the Sp G/L indicator assigned in Vendor tab (Sp. G/L transactions for exceptions list) in FBZP > All Company Code and select your company code and assign them in "Sp. G/L transactions to be paid" in vendor tab and try to run F110.
Try it,it will work.
Do revert for any further help.
Regards,

Firefox is refusing to start. It says that my profile is missing, which it appears to be. Yet the way in which one goes about creating a new profile wont' work either. Anybody have a bloody clue what's going on and how to fix it?

Firefox is refusing to start. It says that my profile is missing, which it appears to be. Yet the way in which one goes about creating a new profile wont' work either. Anybody have a bloody clue what's going on and how to fix it?

AIR give you classes to detect an on-line or off-line status, it's in
this way for the sake of flexibility for instance what happens if you
only what to sync data only on Saturdays at 2 am? If it were done
automatically that'll be a problem. And it isn't so complicated.
You can download the SalesBuilder from AIR examples at www.adobe.com/devnet/air
it's an application that does everything you have in mind.
I don't understand your question abou file types.
An AIR app can communicate with almost every backend served tech
CF, .Net, PHP, RoR.
Sincerely,
Michael
El 14/05/2009, a las 8:48, IrishAIRMax <[email protected]> escribió:
>
I have to say that I'm loving the picture! well cool!
>
Sorry but I don't quiet understand. I thought AIR did the updating
automatically? I didn't realise the developer had to program the
logic of how the updates take place? Is it a case in most AIR apps
that when online the app updates the server and once every intervel
(of however long) the local SQLite DB is synced to the more updated
server DB. Then when offline the developer has to sense that the app
is offline and store a log manually of the updates without any help
from AIR itself, and then update once it comes online again?
>
Can AIR link to anything more than a database on the server side
apart from webservices, for example .as files or any other file types?
>
What type of server is a Flex app stored on, is it a specific Adobe
server rather than a Java or .NET server?
>
Thank you so much for your last comment!
IrishAIRMax
>

Just bought my 1st mac. I have some wma format music files which wo'nt play on i tunes. How best to convert these files so they will play on iTunes?

just bought my 1st mac. I have some wma format music files which wo'nt play on i tunes. How best to convert these files so they will play on iTunes? Any suggestions much appreciated

Try using VLC Media Player 2.0.6. EasyWMA 3.3.5 or Music Converter 1.5.1 should be able to convert them to .mp3.

Sharing iPhoto Library - Order in which albums appear

A friend is sharing her iPhoto library on her iMac over her home wireless network to a MacBook Air. This works well except that the list of albums on the MacBook Air doesn't seem to bear any resemblance to the order in which they appear on the iMac. As she has a lot of albums it can be difficult to find the one she wants on the MacBook Air.
Is there a logic to the order in which albums are listed on the Mac which is accessing the shared albums?
Thanks for any advice!
Andrew Spackman

Just ran a test and was able to rearrange the albums in my iPhoto library and got the same order in Front Row. So it's doable.
Have you rebuild the library? Backup and launch iPhoto with the Command+Option keys depressed to rebuild the library. Select the last three options.
Click to view full size
If that doesn't help open the library package and move the AblumData.xml and AlbumData2.xml files to the Desktop. Launch iPhoto and then Front Row.
Next, delete the Front Row preference file, com.apple.frontrow.plist, and try again.

OSX 10.9 Mavericks is there any way to hide servers which always appear in finder after login (hide login items doesn't work as stardered)

hi all my boss has just got himself a nice new mac and wants to connect it on to my windows domain at work, no problems there it’s all connect fine, one thing we done was to map a few of our network drives on our domain so he can easily load them to his mac, works great when it’s on the domain however when he goes home and logs in for each mapped drive it throws up a window saying it can’t connect or when it is connect opens up every drive, even after disabling them at login, now on the apple website the text reads "if you don’t want an item's window to be visible after login, select hide. (Hide does not apply to servers, which always appear in the finder after login), does anyone know any work around that can maybe solve this or point me in the direction where I can find one.
Cheers
Gordon
Network Admin
BPDZenith

hi all my boss has just got himself a nice new mac and wants to connect it on to my windows domain at work, no problems there it’s all connect fine, one thing we done was to map a few of our network drives on our domain so he can easily load them to his mac, works great when it’s on the domain however when he goes home and logs in for each mapped drive it throws up a window saying it can’t connect or when it is connect opens up every drive, even after disabling them at login, now on the apple website the text reads "if you don’t want an item's window to be visible after login, select hide. (Hide does not apply to servers, which always appear in the finder after login), does anyone know any work around that can maybe solve this or point me in the direction where I can find one.
Cheers
Gordon
Network Admin
BPDZenith

Cannot use file for clustered server. Only formatted files on which the cluster resource of the server has a dependency can be used. Either the disk resource containing the file is not present in the cluster group or the cluster resource of the Sql Serve

Hi
Windows serv 2012 cluster on sql 2012 cluster with 2 instance. on works fine , Second instanc ewhen i try to creat DB a get this message.
Cannot use file for clustered server. Only formatted files on which the cluster resource of the server has a dependency can be used. Either the disk resource containing the file is not present in the cluster group or the cluster resource of the Sql
Server does not have a dependency on it.
CREATE DATABASE failed. Some file names listed could not be created. Check related errors. (Microsoft SQL Server, Error: 5184)
Any help please
kam
KAMEL

Hi Saurabh
Exactly I have SQL SERVER 2012
Failover Clustering in windows server 2012 with two nodes with
two instances and exactly I run them in the same server and each instance with
three drives Backup, Data and log.
KAMEL

Is Section Formatting Conditional on which Section Appears Next possible?

Similar Messages

Maybe you are looking for