Is the Nexys2 board (with spartan 3e FPGA) compatible with the FPGA module

Hi my name is DIego and I was wondering if anybody here knows if the NEXYS 2 board (with spartan 3e FPGA) from DIGILENT is compatible
with the LABVIEW FPGA module.
Thanks
Digilent is also the Manufacturer of the SPARTAN 3e STARTER BOARD

Diego:
The NEXYS 2 is not officially supported, but if you'd like to try it, you can attempt to follow the guide for the Spartan 3E here (substituting your NEXYS 2 for the Spartan 3E).
Again, the NEXYS 2 isn't officially supported, so if it doesn't work like the Spartan 3E starter kit board, then you won't be able to use LabVIEW FPGA with it.
Good luck!
Caleb Harris
National Instruments | Mechanical Engineer | http://www.ni.com/support

Similar Messages

How to add the Note board web part to a page with powershell

Hi everyone,
I've been looking around everywhere but haven't seen it explicitly mentioned.
Does anyone know how to add the Note Board web part to a Team Site page, e.g. Non-publishing site, Left Zone, First webpart in the zone in powershell?
Examples like this one http://adicodes.com/adding-web-part-to-page-with-powershell/ only talk about custom web parts uploaded from a local drive.
The example here looks good - http://spcrew.com/blogs/lists/posts/post.aspx?id=21 but is it for the Page Viewer Web Part. How would you go about getting the correct name for the note board web part and configuring it?
Many Thanks,
Ashley
function main(){
[void][System.Reflection.Assembly]::LoadWithPartialName("Microsoft.SharePoint")
$url = "http://sp2010dev1/sites/test1"
$OpenWeb = Get-SPWeb $url
$OpenWeb
$OpenSite = Get-SPSite $url
$file = $OpenWeb.GetFile("http://sp2010dev1/sites/test1/SitePages/test1.aspx")
$WebPartManager = $file.GetLimitedWebPartManager([System.Web.UI.WebControls.WebParts.PersonalizationScope]::Shared)
Add-PageViewerWebPart "http://sp2010dev1/sites/test1" "http://sp2010dev1/sites/test1/SitePages/test1.aspx" "Body" 0 "SPCrew Site" "sp2010dev"
$OpenWeb.Dispose()
function Add-PageViewerWebPart($SiteURL, $pageUrl, $webpartzone, $index, $title, $content)
    $site = new-object Microsoft.SharePoint.SPSite($SiteURL)
    $web=$site.OpenWeb()
    $webpartmanager=$web.GetLimitedWebPartManager($pageUrl, [System.Web.UI.WebControls.WebParts.PersonalizationScope]::Shared)
    $webpart = new-object Microsoft.SharePoint.WebPartPages.PageViewerWebPart
    $webpart.ChromeType = [System.Web.UI.WebControls.WebParts.PartChromeType]::TitleOnly;
    $webpart.Title = $title
    $webpart.ContentLink = "http://www.spcrew.com";
    $webpartmanager.AddWebPart($webpart, $webpartzone, $index);
    $web.Close()
    $site.Close()
function Get-SPSite([string]$url) {
    New-Object Microsoft.SharePoint.SPSite($url)
function Get-SPWeb([string]$url) {
    $SPSite = Get-SPSite $url
    return $SPSite.OpenWeb()
    $SPSite.Dispose()

Hi,
According to your post, my understanding is that you wanted to add the Note board web part to a page with PowerShell.
The name of the Note Board web part is SocialCommentWebPart.
I recommend to use the powershell code below:
$pageUrl="http://sitename/SitePages/test.aspx"
$SiteURL="http://sitename"
$site = new-object Microsoft.SharePoint.SPSite($SiteURL)
$web=$site.OpenWeb()
$webpartmanager=$web.GetLimitedWebPartManager($pageUrl, [System.Web.UI.WebControls.WebParts.PersonalizationScope]::Shared)
$webpart = new-object Microsoft.SharePoint.Portal.WebControls.SocialCommentWebPart
$webpart.title="Note Board"
$webpartmanager.AddWebPart($webpart, "MiddleZone", 0);
$web.Close()
Then the Note board web part will be added to the page.
Best Regards,
Linda Li
Linda Li
TechNet Community Support

HT1414 I get a error,(( Itunes could not restore the Iphone on marks Moblie Because the back up was corrupt or not compatible with the iphone that is being restored.)) Help please anyone My pc is Xp is up to date

I had a very larger OTHER folder in itunes, Went and ask Apple rep at shop today and he advised to do a restore but 1st back..
I back up and then did a manual back to make sure it was done.
Then i started iphone restore, all done and now to restore back up.
But i get a error,
""Itunes could not restore the Iphone on marks Moblie Because the back up was corrupt or not compatible with the iphone that is being restored.""
My pc runs XP and software is up to date, checked this before back up.
Disable Anti Virus
Checked itunes is up to date. Ok
Unplug all leeds at back of my pc, except key board & mouse/monitor.
Unpluged Modem.
Did restore again but get same error message,
help please.

Try this -
http://support.apple.com/kb/TS2529
Best of Luck

TS4036 I've got a new iPad I'm trying to do an iCloud back up but keep being given the following message: no iCloud backups are compatible with the version of iOS (6.1.3) on this iPad. How do I restore I cloud on my new device?

I've got a new iPad and am trying to do an iCloud backup but keep getting the following message: no iCloud backups are compatible with the version of iOS (6.1.3) on this iPad.
How do I restore info from iCloud onto my new device?

You would have to update your device first, before you can restore your iPad from your backup. Resolution: set it up as anew device, then update your device to the latest version "Settings > General > Updates", then reset your device again "Settings > General > Reset > Erase All Content and Settings" and then after the iPad restarts again, choose to restore your device from your backup.

I accidentally deleted Garageband on my MacBook Pro, version 10.6.8. The new version of Garageband is only compatible with 10.9 and above. Is it possible to still get the older version? OR, can I get another copy of the startup CD for my computer

I accidentally deleted GarageBand on my MacBook Pro, version 10.6.8. The new version of GarageBand is only compatible with 10.9 and above. Is it possible to still get the older version? OR, can I get another copy of the startup CD that came with my computer so that I can reinstall GarageBand?

The new version of GarageBand is only compatible with 10.9 and above.
If your Mac can run MacOS X 10.6.8, it probably can be upgraded to Yosemite, if you don't have to stick to Snowleopard for other reasons.
Is it possible to still get the older version?
Amazon or eBay are still selling iLife '11 installer disks, and you could reinstall GarageBand from these DVDs. But it will be expensive.
Have you checked your backups, if you can restore GarageBand from a backup?
OR, can I get another copy of the startup CD that came with my computer so that I can reinstall GarageBand?
Sometimes the AppleStore Support will replace missing installer CDs for a fee.

Unable to refresh the schema of FIM MA.Getting an error in Event viewer ""the current version of database is not compatible with the one expected by Forefront Identity Manager service. The current version of database is : 1116. The expected version is :1"

Hi,
We have installed FIM MA with an account that have all the sufficient rights.It got created successfully and worked for Full Import and Full Sync. But, due to some version incompatabilities, we have installed a patch.PFB link for the patch.
http://support.microsoft.com/en-us/kb/2969673/en-us
Now, we are trying to refresh the schema of FIM MA. While doing that we are facing an error "Failed to connect to database". The user account with which we are connecting has read and write permissions on DB.In the event viewer some errors are
logged like "the current version of database is not compatible with the one expected by Forefront Identity Manager service. The current version of database is : 1116. The expected version is :1122" with event ID 3. PFB images for more detailed
view.
Please advice how to fix the issue.
Thanks
Prasanthi.

Hello,
seems to me that you maybe only updated the syncengine but not portal/webservice.
I had that error once after an recovery from scratch and forgot one of the hotfixes to apply to all services.
-Peter
Peter Stapf - ExpertCircle GmbH - My blog:
JustIDM.wordpress.com

I just got an iPhone 4 as an upgrade from the original iPhone 3. I came home and tried to sync it with my iTunes and it says I need to upgrade my iTunes to work with the 4. The current version of iTunes isn't compatible with my G5 mac?????

I just got an iPhone 4 as an upgrade from the original iPhone 3. I came home and tried to sync it with my iTunes and it says I need to upgrade my iTunes to work with the 4. The current version of iTunes isn't compatible with my G5 mac????? Help

Return it.
The requirements are on the box and on the website:
Mac system requirements
Mac computer with USB 2.0 port
Mac OS X v10.5.8 or later
iTunes 10.1 or later (free download fromwww.itunes.com/download)
iTunes Store account
Internet access
http://www.apple.com/iphone/specs.html

Problem with multiple sub-panels through Enum case structure: "The VI is not in a state compatible with this operation"

Hello,
I am using LabVIEW 8.0 and I am attempting to create a sub-panel that displays the front panel of a sub-vi depending on the selection made by the user via the Enum dropdown menu. I have wired the Enum to a case structure and applied identical coding to each individual case structure except for obviously changing the sub-vi source. However, I receive an error "The VI is not in a state compatible with this operation." I was able to successfully make a single sub-vi work within a sub-panel using a true/false case structure and the exact same coding. However, now that I am using an Enum box wired to a case structure, I receive this error. I have attached my block diagram as well. Could anyone assist me as to where it is that I am going wrong?
Thanks in advance!
Solved!
Go to Solution.
Attachments:
enum subpanels.JPG ‏22 KB

torm wrote:
I have attached my block diagram as well
I only see a picture. Can you attach the VI instead? At what point do you close the reference?
torm wrote:
I have wired the Enum to a case structure and applied identical coding to each individual case structure except for obviously changing the sub-vi source.
Well, if the code is identical except for the source, only the source should be inside the case, right? Why duplicate code?
LabVIEW Champion . Do more with less code and in less time .

Firefox was working, today did not start with error message the the version of this file is not compatible with the version of windows you're running.

Computer has Windows 7 Ultimate 64bit. Firefox has run fine for over a year on this computer. Nothing was changed or updated except Windows update shows that it installed updates on Aug 19. I had computer off for week before because out of town, came back and started on Aug 18, but Firefox worked on that day. Did not use FF again till today. Today on Aug 22nd, firefox will not start, shortcut icon has changed to program not there. Exe in folder when clicked brings up error message say the version of this file is not compatible with version of Windows I am running. Firefox exe shows created Aug 20. I suspect update, either Windows or FF but lean towards windows, happened that broke things. I notice IE 10 updates, .NET framework updates and malicious software removal tool updates were installed. I have tried restarting computer, did not fix. Tried to run as admin, didn't work. I do not want to uninstall FF unless have to because of all the stuff I have in there, bookmarks, last pass passwords, etc.

Hello,
Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files ('''not the profile folder where the bookmarks are stored''') and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default:
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
Please report back to see if this helped you!
Thank you.

Bootcamp support drivers "the version of this file is not compatible with the version of windows you are running"

Hi,
I've searched everywhere I can think of for a solution to this problem with no success. I see other people have reported similar issues and these have not yet been resolved.
I have installed Windows 7 32 bit on a new Mac Mini under Bootcamp. When I go to install the Bootcamp drivers in Windows, I get the message "the version of this file is not compatible with the version of windows you are running".
Other people have reported this issue when trying to install 3rd party software on a 64 bit version of windows but I'm simply trying to install the Bootcamp drivers on a 32 bit version of Windows.
Is it possible the Mac Mini needs a 64 bit version of Windows installed under Bootcamp? I haven't seen this requirement mentioned anywhere.
Appreciated all and any help that can be offered.

Welcome to the Apple Support Communities
That's because the Late 2012 iMac and Mac mini only supports the 64-bit Windows 7 version, so the drivers you downloaded are designed to work with the 64-bit version and you can't install them on a 32-bit version. Install the 64-bit Windows 7 on your computer

"The version of this file is not compatible with the version of Windows you're running.[...]".What can I do?

I must run a 32-bit programe on a windows 64-bit operating sistem, and i receive this message:"The version of this file is not compatible with the version of Windows you're running.[...]". I tried with Troubleshoot compatibility - didn't
work. I tried set to run in compatibility mode for Windows XP in file properties window and it didn't work. What can I do more? I
must run this programe to acces my database.

Hello qqnicol,
What program do you run?
Please contact the software provider to confirm if this 32-bit program can run in 64-bit Windows.
As some programs can only run in specific version of Windows, please download the right version of software.
Most programs designed for the 32-bit version of Windows will work on the 64-bit version of Windows. Notable exceptions are many antivirus programs.
Device drivers designed for the 32-bit version of Windows don't work on computers running a 64-bit version of Windows too.
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

I'am getting an update error when am trying to upgrade to newer version (4.3.2)..the error message content shows that i tunes could not back up the i pod,because the back up was corrupt or not compatible with ipod..can anyone help me out to fix this issue

I'am getting an update error when am trying to upgrade to newer version (4.3.2)..the error message content shows that i tunes could not back up the i pod,because the back up was corrupt or not compatible with ipod..can anyone help me out to fix this issue

Hi,
Try here: http://support.apple.com/kb/HT1808.
Hope this helps!
---likeabird---

Is the Canon Powershot S2 IS Digital Camera compatible with an ipod photo?

I'm going on a roadtrip to the northwest next month and was wondering if anyone knows whether the Canon Powershot S2 IS Digital Camera compatible with an ipod photo?

You cannot, with a PC or a Mac, transfer photos from a camera directly to the iPod. You need to download the images from the camera to your computer first, then move the pictures from the computer to the iPod.
Not quite sure about that - from the Apple Store (UK):
Simply plug the iPod Camera Connector into the iPod dock connector, plug your camera’s USB cable and watch your images make their way to the iPod, ready to view in a slide show!
Compatible with iPod with color display.
Not compatible with iPod nano.
Requires iPod software v1.1.
See http://www.apple.com/ipod/compatibility/cameraconnector.html for supported cameras.
Regards,
Colin R.

Is the Hitachi AXM209UKR Slim Micro System with docking for iPod compatible with the iPhone 4 (Xmas present bought for me)? Need to know before I open box ��. Thanks all Merry Christmas!

Is the Hitachi AXM209UKR Slim Micro System with docking for iPod compatible with the iPhone 4 (Xmas present bought for me)? Need to know before I open box . Thanks all Merry Christmas!

Not to worry took back to store and got one that works with ipad2 as well

I'm thinking about getting an i pod touch for my daughter. If I get the 4th generation i pod, is it compatible with the ios 7 updates for i phones as far as if she wants to imessage or face time with me?

I'm thinking about getting an i pod touch for my daughter. If I get the 4th generation i pod, is it compatible with the ios 7 updates for i phones as far as if she wants to imessage or face time with me?

The 4G can not run IOS-7. "6" is the highest that it can go. You need the 5G for IOS-7.
However, that won't affect her ability to use iMessage and FaceTime.

HT4623 I want to change the laptop to which my iPhone is compatible with, help!

I want to change the laptop to which my iPhone is compatible with, help!

isshajal wrote:
I have also similar prob. I want to change OS of my laptop.
This is the iPhone Forum.
Your Issue is unrelated and needs to be posted in the Appropriate Forum...
Regards.

Is the Nexys2 board (with spartan 3e FPGA) compatible with the FPGA module

Similar Messages

Maybe you are looking for