Is there a COMPONENT video OUT solution for the iBook?

I am currently using Apple's Video Adapter (mini-VGA to S-Video) to hook up to my widescreen. Let's face it, S-Video *****. I am trying to find a solution that would allow me to get component video out of my iBook and run that into my widescreen.
Is there a VGA->Component Video Adapter available that would work with the mini-VGA -> VGA adapter that ships with the iBook? (Or some other way to get a component video signal?)
Thanks!
iBook G4 1.2GHz   Mac OS X (10.4.3)   1.25 GB RAM

Hi Mactivist,
i am not an expert on this video stuff but I think
you might find this useful. Although the
procedure described is about a Mac Mini (which has a
dvi connector) the guy actually used a DVI-VGA
adapter. Therefore, I believe, the set-up described
should work for you too.
-Petra
Unfortunately, iBooks do not have DVI out. What I really need is a VGA to Component video adapter.
And for the person who wasn't sure what a component video cable looks like, this is a cable that has 3 rca-like plugs on it, each one supplies a different color (RGB I think).
So far, I've not found a VGA adapter that can do this unless you are using an ATI video card as the source.
iBook G4 1.2GHz   Mac OS X (10.4.3)   1.25GB RAM

Similar Messages

  • Is there a Thunderbolt to Component Video cable / adapter for the new iMac?

    Hello!
    My church is looking to purchase a new iMac to run our presentation software.
    We currently have a PC that has a graphics card which has a component-out cable.  We connect that to a component video distribution amplifer to distribute to several HDTVs and a projector.
    Is there a way to connect the iMac to a component video (Y, Pb, Pr or Red blue Green) input?
    I understand that DVI is digital and Component is analog, but has anyone found a device, cable, and/or adapter that will do the job?
    Thanks,
    Randy

    There's at least this one:
    http://www.amazon.com/DisplayPort-Composite-Video-S-Video-Converter/dp/B004VV8R8 6
    and the review says that it works with current Macs, but I can't verify.
    Regards.

  • Is there going to be a Solution for the Capture Problem?

    I've noticed that it is not only me but Final Cut Pro is not capturing video properly, it should not be so hard to capture from my camcorder(PV-DV51), when I hit log and capture the program just quits, after reinstalling, deleting preferences, the Firewire dock is able to see the camera, I can capture with IMovie for crying out loud! so the only question left, is do I have to upgrade Quicktime 7 player to the full version? because I did not find the upgrade in final cut studio package so do I have to purchase separately?
    Thanks for the help

    "The capture problem" is not, AFAIK, striking any number of folks. At least I've not heard of it. If you're running Final Cut Studio 5, there's not a separate serial - it's a gestalt thingie upon install.
    FCP uses QuickTime to do its capturing (iMovie does not). You might try reinstalling QuickTime (don't skip any steps). Go to /Library/Receipts. Trash all QuickTime related .pkg files (Don't worry, you're only deleting receipts so that a full install will take place). Go to http://www.quicktime.com/ and download the latest installer and run it. Reboot.
    post back,
    Patrick

  • Intel iMac Component Video Out

    Has anyone tried a component video out connection to an HDTV from the Intel iMac? I've read from the ATI website that the new Radeon X1600 card supports component video out with an adapter.
    There was never a really good way to do this with previous Mac models.

    A little more news about component out from the Intel iMac 20"
    The VGA adapter included with my 12" iBook does not fit the mini-dvi port on the iMac. So you need to buy a new adapter from Apple.
    Also:
    I tried using a VGA-to-component cable with the iBook VGA adapter and a standard television set. The cable is designed to interface a component-out DVD player to a VGA-in BenQ projector. I ran the cable to the component-in jacks on my Sanyo (analog-non HD) television. No go. Tried several resolutions and adapter refresh rates, and got some smeared video, but it made me nervous and I stopped experimenting. Haven't tried this cable with my HDTV for fear of damage.
    Basically, the cable was meant to take a video signal from the DVD player to the projector. My experiment was mac to TV.
    So sad, oh so sad ;<
    Regards,
    Gene

  • Is there a solution for the limited time of videorecording?

    Is there a solution for the limited time of videorecording?
    By recording on my iPad2 there is a maximum time of 49 minutes and 51 seconds.

    Hello Studio X
    I have an iPad2 with 64 GB. After I start the videorecording it stops automaticly by 49 minutes en 51 seconds.
    I looked in my settings and there was still enough space left. Although I do not think that the 64Gb is not the problem.
    I bought myself an alternative recording app now. I hope it works properly but if the quality is OK. I do not know. I combine the recordings with my video (digitaltape) camera of Sony.
    Thanks for your reply
    sozave007

  • Video out cable for e71

    Is there some video out cable for e71? I couldn't found this on nokia.com. Please help

    Yes, it says that there is an 2.5'' A/V port, however it is only for Audio. It is either a typing error or nokia changed its mind during the production and dropped the Video capability out.
    I was also dissapointed like you. But one day, just one day, they will start PROOF READING the specs.
    I still own a NOKIA 6250 KUDOS others as You Would Like to be KUDOSed! There are only 10 kinds of people in the world, ones who digg binary and ones who dont

  • FAQ: Is there an audio/video cables available for ...

    I was wondering if there's any audio/video cables available for the Lumia 800 to hook up to my TV? If so where can I find em'?
    Nokia phones (Owned 1999-Now):
    5110, 3390, 3520, 6230, 6682, N72, 5800 XM , Lumia 800, Lumia 900 (Currently owned)
    Solved!
    Go to Solution.

    That sucks. I'm beginning to think my old 5800 can do more than my current lumia 800.
    Nokia phones (Owned 1999-Now):
    5110, 3390, 3520, 6230, 6682, N72, 5800 XM , Lumia 800, Lumia 900 (Currently owned)

  • Is there a solution for the ups 3 battery?

    I'm getting so frustrated with the battery on the iPad 3! Left it into charge all night and day whilst switched off and it was 95%! Is there going to be a solution for this? Should I just send this back and get an iPad 2?

    The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
    Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
    How to Calibrate Your Mac, iPhone, or iPad Battery
    http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
    At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
    Also, if you have a 3rd generation iPad, look at
    Apple: iPad Battery Nothing to Get Charged Up About
    http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
    Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
    http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
    New iPad Takes Much Longer to Charge Than iPad 2
    http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
    Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
    http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
     Cheers, Tom

  • Is there a solution for the missing letter in the Arabic keyboard , IPhone 4s Os 5??

    Is there a solution for the missing letter in the Arabic keyboard , IPhone 4s Os 5??

    Please specify the letter you think is missing.  You should be able to find all letters you need by holding down keys which generate popup menus to give you additional options.

  • I am trying to Download the free Maverick 10.9.1 and it's sitting there showing "downloading" but nothing indicates for the last 15 minutes that it is really doing it? Anyone out there has ideas to hare?

    I am trying to Download the free Maverick 10.9.1 and it's sitting there showing "downloading" but nothing indicates for the last 15 minutes that it is really doing it? Anyone out there has ideas to share?

    When I downloaded it, it appeared as if nothing was happening but it actually was being downloaded! It took quite some time to download. I suspect the internet speed affects how quickly it moves.

  • Is there an "Unread Mail" solution for the iPhone that would allow me to see all new Unread mail?  I have ove 100 subfolders with rules that redirect mail.

    Is there an "Unread Mail" solution for the iPhone that would allow me to see all new Unread mail in one location?
    I have an iPhone 4 (not 4S). I use the Outlook client with an Exchange Server on my Desk. 
    In order to keep email organized, I have many subfolders (over 100) under my Inbox with rules that automatically redirect the bulk of new unread email to the subfolders.
    In the Outlook client on the desktop, there is an "Unread Mail" Folder that lets me see ll unread mail in one location whether it be in the main inbox or in one of the subfolders of the inbox. 
    I would like to see all unread email in one location without me having to change my rules and work flow that I have been using for 7+ years?
    It is much more work for me (so far) to see new email on the iPhone.  You have to scan each subfolder in order to tell where the new mail is that just arrived.

    Is there an "Unread Mail" solution for the iPhone that would allow me to see all new Unread mail in one location?
    I have an iPhone 4 (not 4S). I use the Outlook client with an Exchange Server on my Desk. 
    In order to keep email organized, I have many subfolders (over 100) under my Inbox with rules that automatically redirect the bulk of new unread email to the subfolders.
    In the Outlook client on the desktop, there is an "Unread Mail" Folder that lets me see ll unread mail in one location whether it be in the main inbox or in one of the subfolders of the inbox. 
    I would like to see all unread email in one location without me having to change my rules and work flow that I have been using for 7+ years?
    It is much more work for me (so far) to see new email on the iPhone.  You have to scan each subfolder in order to tell where the new mail is that just arrived.

  • Is there a documented solution for the FlashPlayer Metafile Download error that works?

    Many people are experiencing problems when downloading the new FlashPlayer version 10.3.183.5 from the Adobe website.  During the download process a "Metafile Download Error" occurs when performed from an office or client facing facility.   This issue is not isolated to Win7, but is also an issue with Win XP and/or Vista.  Is there a documented solution for the FlashPlayer Metafile Download error that works?

    Use the download links in this post when that error occurs: http://forums.adobe.com/thread/889580

  • Is there a faster hard drive available for the 1.83Ghz Dual Core MacMini?

    Is there a faster hard drive available for the 1.83Ghz Dual Core MacMini? Since this is the slowest component of the whole system is there a way to upgrade to something faster (possibly a 7200RPM drive)?
    thanks,
    Jeff

    Ways to make it faster:
    1) Be sure you aren't running any Rosetta apps or drivers. Watch out for print drivers. You can use Utilities > Activity Monitor to spot the legacy stuff that uses Rosetta. (Make sure the pop-down menu at the top of the Activity Monitor window says "All Processes", not just "My processes".)
    2) Max your RAM to 2 Gigs. You can't go to 3 Gigs since you only have the CoreDuo CPU.
    3) Whatever hard drive you use, keep at least one-third of it empty. Obviously this will be easier with a large external firewire drive.
    4) 3.5 inch drives will be faster than 2.5 inch drives -- even at the same RPM. So again, external will be the way to go, since Minis can only take 2.5 inch internals.
    If you want an external that stacks under the Mini, some examples are here:
    http://www.123macmini.com/accessories/guide/enclosures.html
    (The NewerTech and WiebeTech models appear to have good reputations, though I have no personal experience with them.)
    But again, all of the factors I mention above will affect performance.

  • SSRS 2008 Column Chart with Calculated Series (moving average) "formula error - there are not enough data points for the period" error

    I have a simple column chart grouping on 1 value on the category axis.  For simplicity's sake, we are plotting $ amounts grouping by Month on the category axis.  I right click on the data series and choose "Add calculated series...".  I choose moving average.  I want to move the average over at least 2 periods.
    When I run the report, I get the error "Formula error - there are not enough data points for the period".  The way the report is, I never have a guaranteed number of categories (there could be one or there could be 5).  When there is 2 or more, the chart renders fine, however, when there is only 1 value, instead of suppressing the moving average line, I get that error and the chart shows nothing.
    I don't think this is entirely acceptable for our end users.  At a minimum, I would think the moving average line would be suppressed instead of hiding the entire chart.  Does anyone know of any workarounds or do I have to enter another ms. connect bug/design consideration.
    Thank you,
    Dan

    I was having the same error while trying to plot a moving average across 7 days. The work around I found was rather simple.
    If you right click your report in the solution explorer and select "View Code" it will give you the underlying XML of the report. Find the entry for the value of your calculated series and enter a formula to dynamically create your periods.
    <ChartFormulaParameter Name="Period">
                      <Value>=IIf(Count(Fields!Calls.Value) >= 7 ,7, (Count(Fields!Calls.Value)))</Value>
    </ChartFormulaParameter>
    What I'm doing here is getting the row count of records returned in the chart. If the returned rows are greater than or equal to 7 (The amount of days I want the average) it will set the points to 7. If not, it will set the number to the amount of returned rows. So far this has worked great. I'm probably going to add more code to handle no records returned although in my case that shouldn't happen but, you never know.
    A side note:
    If you open the calculated series properties in the designer, you will notice the number of periods is set to "0". If you change this it will overwrite your custom formula in the XML.

  • I can't seem to get my iPod touch (4th Gen) to play photo slideshows or videos through my TV.  Is this a design flaw?  Or is it me?  My old iPod used to do it no problem, but now I can't even find any video out options in the settings.

    I can't seem to get my iPod touch (4th Gen) to play photo slideshows or videos through my TV.  Is this a design flaw?  Or is it me?  My old iPod used to do it no problem, but now I can't even find any video out options in the settings.

    This cable And Im using a cable that has a headphone jack on one end and RCA cables on the other. does not work for iPod touches. See:
    http://support.apple.com/kb/HT1454

Maybe you are looking for