Is there a keystroke to switch between screens?

Is there a quick-key combination to switching between my screen and the other participants screen? I always hate having to "steal" the mouse pointer from the other party so that I can check on the status of something on my end.
Thanks.
Craig Elliott

The issue of cross store purchasing comes up frequently so I'll just quote one of the most complete explanations (courtesy of Dave Sawyer) from the many given:
In order to buy from any given country's iTunes Music Store you must be able to show some form of residency which would be either:
a) a credit card with a billing address in that country, or
b) a mailing address in that country and a gift certificate or a prepaid card that was bought in that country.
If you cannot fulfill one of these two sets of conditions, you will not be able to purchase from any given country's iTMS.
.......this is due to restrictions placed on Apple by the record companies and other rights holders (who are often completely different from country to country and so all require their own individual negotiations and contracts), not by Apple's choice. And this also applies to all the legal download stores that carry major-label content, not just the iTMS.

Similar Messages

Is there a way to switch between workspaces in Spaces from the command line? I want to write a script to set up certain applications in certain workspaces (without having to do it manually each time)...

Is there a way to switch between workspaces in Spaces from the comnand line? I use several workspaces from Spaces, each workspace having a certain number of fixed applications running. Rather than set all this up each time I log on, I'd like to write a script from the command line (I use gawk) to automate this. Currently I have a gawk script that, given a directory, opens a few xterms whose working directory is the given directory, and opens "preview" applied to a certain file in that directory. However, at present I have to manually move an xterm through each workspace and run my gawk script in each workspace (applied to each directory that I'm working on).
There must be a better way...

Addendum: Can this be done via: open -a Spaces --args xxx , where xxx is some set of arguments (or something like this)?

I have question about take folders. After recording multiple takes on a project of say 16 tracks. Is there a way to switch between takes globally? Instead of one at a time which is tedious. I am talking about a situation where all tracks are being

Oops , my body got put into the title sorry. Anyway so when doing live recording and multiple takes of all tracks is there a way to switch between takes globally instead of switching them one by one?

You used the data. Verizon can not see what it was sued for. However your phone can see whats apps used the data. go to settings-data usage- there will be a place that says data usage cycle. line the dates up with your cycle. then there will be a bar graph below that extend bother white bars one all the way to the left and one all the way to the right. after those are extended below that will be a list of apps, there should be one that used over 2 gb and that will show you what app used that data in her purse

Is there a shorcut to switch between the differents groups of tab in firefox 4?

Is there a shorcut to switch between the differents groups of tab in firefox 4 without seeing the panorama?
Or how can I create this?
Regards
Tetramonium

Is there any way to change these shortcuts?
Since I'm using a '''Belgian keyboard''', the only way to type ` is to use the combination of AltGr + ` + followed by a space...
This makes it impossible to use CTRL+` to change Tab groups.
Thanks already for your tips!

Is it possible to use booleans to build a VI that uses buttons to switch between screens (3 only) while the other screens disappear?

As a beginner, I need help figuring out how to build a simply VI that uses boolean logic to switch between three different screens. I need a "Home" screen, the next screen which has a button to go back "Home" and a third screen which has two buttons to go "Home" and "Previous Screen". Can someone help me with a simple block diagram?

Hi,
Or put the data in three tab controls. The tabs itself are hidden. The
program switches between the tab sheet if one of the buttons is pressed.
The buttons are best not copied, e.g. the same buttons are used in every tab
sheet (buttons hover above the tab, a black shadow will apear). If the first
sheet is shown, button 2 and 3 are hidden, sheet two: only button 3 is
hidden, sheet three no button is hidden.
Showing the tabs allows the user to choose the views directlly. The button
logic is not needed anymore. But you'll have to live with a simple tab
sheet, instead of a fancy button system!
Regards,
Wiebe.
"Jason R" wrote in message
news:[email protected]...
> Another solution if you want to avoid property-node hell...
>
> Divide your screen into 1/4ths. That is, make your FP 4x larger than
> your desktop.
>
> Place screen 1 on the upper left quadrant.
> Place screen 2 on the upper right quadrant.
> Place screen 3 on the lower left quadrant.
> Screen 4 (lower right quadrant) is unused.
>
> Disable the ability to scroll at run time.
>
> As the user clicks buttons, use the properties of this vi to move what
> the user can see on the front panel.
>
> Cheating? yep. Easier? yep.
>
> Hope this helps! =)
>
> btw - be sure not to update the FP controls when they are not visible,
> or this will eat processor cycles.
>
> Sincerely,
> Jason G Richmond
> Project Engineer II and LVAAD Instructor
> VI Engineering
> [email protected] (domain should be vieng.com (no A's))
>
>
> missileman wrote:
> > Is it possible to use booleans to build a VI that uses buttons to
> > switch between screens (3 only) while the other screens disappear?
> >
> > As a beginner, I need help figuring out how to build a simply VI that
> > uses boolean logic to switch between three different screens. I need a
> > "Home" screen, the next screen which has a button to go back "Home"
> > and a third screen which has two buttons to go "Home" and "Previous
> > Screen". Can someone help me with a simple block diagram?
>
>

Scrolls to top when switching between screens

Every time I switch between a screen, say my music library or podcasts and my ipod, it jumps back up to the top of the list. When trying to manage my music and podcasts it gets really frustrating because I like to switch back and forth to see what I still need to add, and I end up having to do a ton of extra scrolling. Is there a way to stop this from happening? I'm really tempted to switch back to iTunes 10 just because of this stupid issue.

If you touch the screen - right by where the time indicator is - in the top center of the iPad, the screen that you are on will scroll quickly back to the top of the page. You can also scroll to the top of the page in the mail app - when viewing your list of emails in the window on the left - tap the top of the screen above the list of emails - - and the screen will scroll back to the top.
As far as I can tell - that works in any app where you cans swipe to the bottom of a page - tap the top center by the time in order to scroll back to the top.
EDIT- apparently you can touch the top of the screen anywhere now to scroll to the top from what I just saw in my browser. I am using iCab Mobile and when I touch anywhere in the black area - just inside the bezel - the page will scroll to the top. I could swear you had to touch the middle of the screen at the top, but now I see that any tap at the top will work.

AS: how to switch between screen modes?

hi @ all,
does anybody know how to switch between the 4 screen modes in ps cs3?
- standard
- maximized
- full screen with menubar
- full screen
I looked around but could not find anything discribing a way doing this by applescript.
the only thread I found
http://www.adobeforums.com/webx/.3bc85cba/0
refers to javascript but I was not able to adopt it.
thanks for any help
Claus

To do it with AS only, you need to simulate the "f" key with System Events:
tell application "System Events"
tell process "Adobe Photoshop CS3" to keystroke "f"
end tell
That will loop thought the screen modes as if you did it manually.
To run the JS from the other thread, you need to use the "do javascript" command. Remember to escape all the quotes in the JS:
tell application "Adobe Photoshop CS3"
do javascript "var screenModeOptions = new Array(4);
     screenModeOptions[0] = \"screenModeStandard\";
     screenModeOptions[1] = \"screenModeMaximized\";
     screenModeOptions[2] = \"screenModeFullScreenWithMenubar\";
     screenModeOptions[3] = \"screenModeFullScreen\";
     applyScreenMode(screenModeOptions[0]);
     function applyScreenMode(mode){
      var desc = new ActionDescriptor();
      var ref = new ActionReference();
      var menuID = stringIDToTypeID( mode );
      ref.putEnumerated( charIDToTypeID( \"Mn \" ), charIDToTypeID( \"MnIt\" ), menuID );
      desc.putReference( charIDToTypeID( \"null\" ), ref) ;
      executeAction( charIDToTypeID( \"slct\" ), desc, DialogModes.NO );
end tell
The JS is the better solution if you wanted to skip directly to the desired screen mode without looping through the others.
Carl.

Is there a way to switch between different tabs using your keyboard (eg CTRL+T) instead of clicking with the mouse?

I would like to you use the keyboard to switch between tabs but I couldn't find if this is possible.

Ctrl + Tab

LOGIC PRO 8 crashing when switching between screen sets

Hey eveyone -
first post up on this forum - but have been a professional logic user for years!
I like to think I am very well versed with the set up and running of mac systems and have come across a strange anomoly that i would appreciate if any one else out there has had happen - or would mind repeating - only takes 2 minute.
i have just bought a new mac pro and have logic pro 8 instaled and a variey of plugins
first
create a screen set & save as 1
create another with no movie as float and save it as 2
toggle backwards and forwards between them and notice you machine does not crash...
now ...
create a screen set & THIS TME OPEN A MOVIE AS FLOAT and saveit as part of your screen set - say to number 1
create another with no movie as float and save it as 2
now do the same thing and tell me if Logic crashes.....
mine does and it is bloody annoying as i compose to picture and need this to work smoothly.
I have unloaded all the plugins in the AU manager, tried putting the movie file on different drives, tried diferent movie files.... all the same.... I've tried it with other float windows and all works perfectly fine - so have narrowed it down to the movie float does not like being part of a screen set when you moving around between screensets frequently....
HELP!!!!!!! anyone out there have ideas??
really much appreciated any help anyone can shed on this or at least repeat the problem so I know it is a limitation of architecture not just my system....
many thanks
Paul

well guys - thanks for that - it would seem that after trashing my prefs file I reloaded the cue i was working on and did the swithing back and forth and that it still crashed the session.
I then tried it with a new song and with the same movie - and DIDNT crash -
so what I am think is this - i recently came from logic 7 to 8 and have transfereed my auto load from systen to the other.
I think it might be something in that
- i will check it
I think the answer might be to rebuild a new autoload within 8 - it's the only way to be sure...
...what do you both think??
and thanks again for your help - good to know there is someone out there when these strange things happen!!!
P

Is there any way to switch between using two different phones?

I know when phones have SIM cards (like with ATT), you can use two different phones by simply moving the SIM card from one phone to the other and ATT is none the wiser.
Is there any way to do that sort of thing with Verizon?
I currently have an iPhone 5 but would like to start playing around with Android (I'm a gadget nut). So, assuming I find an unlocked Android phone, is there any way to bounce back and forth between using different phones (obviously only one at a time)?

Michael_F wrote:
So, the SIM card contains all the info necessary for the new phone to ring when called, etc?
yes, assuming the phones use the same size SIM card (otherwise, you'll need an adapter or a new SIM card; the cards are free at your local Corporate Verizon store).
4G SIM Information | Verizon Wireless

Keystroke to switch a window between monitors?

Howdy....is there a keystroke to switch an open window between my MBP monitor and my external? I typically park several windows on my MBP screen, but when I need to use them I want them on the larger external display. Anyway to accomplish this without dragging it?
Thanks.

Hi,
No keystroke that I know of, but you could write a Script & tie it to a Keystroke.
Have you tried Expose?
How about keeping them on the big screen and just minimize them to the Dock?

Is there a hotkey to go between full-screen apps?

I have multiple full-screen apps. Is there a way to switch between them via the keyboard? In the old day, I could assign Spaces desktop to a hotkey, and jump to it. That's preserved for multiple desktops in Lion OS X, but it doesn't seem to work on full-screen apps.
The two finger magic mouse scroll thing is a little awkward for me.
Conrad

On the trackpad it is a four finger swipe <-->
Maybe in your system preferences for your magic mouse.

Switching between documents in Pages

I am in the habit of working with multiple Pages documents at once and must manually click "Window" to move to the other document. I know that if I need to switch to another application I can use "Command + Tab", however is there a way to switch between documents in Pages other than using the "Windows" menu?

Hi jordalex325
Welcome to the forum.
The function is a +system wide function+ so you find it in the Finder:
+Menu > Window > Cycle through Windows+
In English the shortcut shows as +command `+ on the menu, look in the same menu in Swedish and see what it suggests there.
*Swedish keyboard*
!http://upload.wikimedia.org/wikipedia/commons/thumb/e/e0/KBSweden.svg/500px-KBSweden.svg.png!
The ` key is on the top row, far right and combined with the shift key.
Amendment: On closer examination this is actually a PC keyboard. I am trying to source a Swedish Mac Keyboard image, so far unsuccessfully. Maybe you could tell us what is different meanwhile.
*English Keyboard*
!http://images.apple.com/keyboard/images/gallery/wired120070813.jpg!
You could try that or try remapping the shortcut in:
+System Preferences > Hardware > Keyboard & Mouse > Keyboard Shortcuts+
Peter
PS Try opening +Show Keyboard Viewer+ from your input menu on the top right of the menu bar and see what characters are where when you type.

How to? switch between the following mission control preference "group windows by application" on the fly? OR have both readily available

Is there any way to switch between the following mission control preference "group windows by application" on the fly? I would like to turn this feature on and off quickly. OR have both readily available?
If osx 10.9 does not support this, does any one know if automater can be used to creat a short cut to turn this preferance on and off?
Current solution (not much of a solution)
I currently added the preferance control icon for mission control on my dock.

4u2nv247 wrote:
Current solution (not much of a solution)
I currently added the preferance control icon for mission control on my dock.
Do you mean the general System Preferences icon? ...If so, it's possible to put the icon specifically for the Mission Control pane in the Dock:
I'm on Mountain Lion and that Preference Pane is in: Macintosh HD > System (not Users) > Library > PreferencePanes > Expose.prefPane
...Drag that Expose.prefPane to the right-hand side of the Dock, say, next to the Trash. Then you can simply click on the resulting Expose Prefs icon in the Dock to open its Prefs panel.

Keyboard shortcut: switch between modules?

Hi all and thank you for your help.
I have checked through the keyboard shortcuts and could not fint it: Is there a shortcut to switch between the different modules in LR 3? It will be very handy if there is something like that.
Thank you so long.
Deon

Hi,
You can also add your own shortcuts either by editing (or adding) TranslatedStrings.txt in the relevant subfolder of the Adobe\Adobe Photoshop Lightroom 3.4\Resources folder or by using the Keyboard Tamer plugin.
As an example, here is my own version of TranslatedStrings.txt which I added to the Adobe\Adobe Photoshop Lightroom 3.4\Resources\en folder (this file doesn't exist by default for the english language - english shortcuts are hardcoded in LR) :
"$$$/AgLibrary/Menu/Photo/RotateLeft/Key=Cmd+("
"$$$/AgLibrary/Menu/Photo/RotateRight/Key=Cmd+)"
"$$$/AgLibrary/Filter/Label/IncludeSubItems/Key=A"
"$$$/AgLibrary/Menu/View/ShowFilterBar/Key=$"
The first 2 lines allowed me to fix a problem with the Rotate command because I'm not using an english but a french keyboard. The third line allows me to quickly toggle between include and exclude subfolder view in the Library module and the third one is the shortcut that allows me to toggle the filter bar.
You'll be able to customize your own version of TranslatedStrings.txt by looking at the same file in another subfolder. If your mother language is english, you'll have to look in the subfolder related to the foreign language you know best in order to have an overview of all the commands to which you can attach a shortcut (as mentioned above, TranslatedStrings.txt doesn't exist for the english language).
Patrick

Is there a keystroke to switch between screens?

Similar Messages

Maybe you are looking for