Is there a possibility create background jobs for transaction SP01?

We are creating spool requests (status 'to be processed') for specific printers that are located in different time zones. We want to schedule print jobs by printer to make sure the prints come out at a time the user specifies to us. I am looking for a program with the possibility to make variants by printer that I can include in a job to be created via SM36.Looking forward to your suggestions!
kind regards
Angelique Heutinck

Hi,
Check this link It may help you.
https://forums.sdn.sap.com/click.jspa?searchID=4305151&messageID=2622788
Thanks.

Similar Messages

How to create Background job for Dialog program

Hi Experts,
I have copied Standard tcode to Z-tcode (CS12 tcode).
Now my requirement is to create background job for this program (but program is not a 'E' type its 'I').
How we can schedule Dialog program to Background.
Pls suggest me.
Regards
SK

Hi do as below :
Reefer below :
Bakcground Job Creation
You will have to submit your report using Submit statement ,
then inside the submitted report write open_job.
Regards,
Uma

BackGround Job for Transaction VF06

Hi Experts,
We are having problems with the background Job for transaction VF06. We run this job every day except weekends but this job runs and takes only 0 sec without creating Invoices.
Allthough running this transaction Manually creates Invoice with same variant.
Kindly help me on this.
Thanks and Regards,
Neha Kapoor

Hi,
I have the seen the Log it tells:
Date       Time     Message text                                                                 Message class Message no. Message type
29.06.2008 22:00:48 Job started                                                                       00           516          S
29.06.2008 22:00:48 Step 001 started (program RV60SBAT, variant SOIE AUTO BILL, user ID GGBATCH)      00           550          S
29.06.2008 22:00:48 Job finished                                                                      00           517          S
But Invoices are not getting created.
Thanks and Regards,
Neha Kapoor

Problems creating background job for program (job open, submit and close)

Hi gurus,
im trying to start a background job using the FM BP_START_DATE_EDITOR to show the start date to the job or if it's imediate. this FM it's working fine, after call it im opening a job, submiting it and call the job close FM and the job close FM creates me the job.
The problem it's when i go to the sm37 to see the job status the job has been canceled, and the job log says that i have to give a start date to the job.
What i dont understand it's either the job is imediate or i choose a date to start the job always gives me this error...
Below goes my code,
any ideas will be rewarded
CLEAR: stdt_modify_type, stdt_output.
CALL FUNCTION 'BP_START_DATE_EDITOR'
       EXPORTING
            stdt_dialog                    = 'Y'
            stdt_input                     = stdt_input
            stdt_opcode                    = 14
       IMPORTING
            stdt_modify_type               = stdt_modify_type
            stdt_output                    = stdt_output
       EXCEPTIONS
            fcal_id_not_defined            = 1
            incomplete_last_startdate      = 2
            incomplete_startdate           = 3
            invalid_dialog_type            = 4
            invalid_eventid                = 5
            invalid_opcode                 = 6
            invalid_opmode_name            = 7
            invalid_periodbehaviour        = 8
            invalid_predecessor_jobname    = 9
            last_startdate_in_the_past     = 10
            no_period_data_given           = 11
            no_startdate_given             = 12
            period_and_predjob_no_way      = 13
            period_too_small_for_limit     = 14
            predecessor_jobname_not_unique = 15
            startdate_interval_too_large   = 16
            startdate_in_the_past          = 17
            startdate_is_a_holiday         = 18
            startdate_out_of_fcal_range    = 19
            stdt_before_holiday_in_past    = 20
            unknown_fcal_error_occured     = 21
            no_workday_nr_given            = 22
            invalid_workday_countdir       = 23
            invalid_workday_nr             = 24
            notbefore_stdt_missing         = 25
            workday_starttime_missing      = 26
            no_eventid_given               = 27
            OTHERS                         = 28.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    MOVE 'X' TO gv_flag.
ENDIF.
DATA jobname LIKE tbtcjob-jobname.
DATA jobcount LIKE tbtcjob-jobcount.
DATA job_release LIKE btch0000-char1.
DATA job_imediate TYPE c.
CLEAR: jobname, jobcount, job_release.
CONCATENATE 'MAPAEXEC' sy-uname sy-datum
               INTO jobname SEPARATED BY space.
CALL FUNCTION 'JOB_OPEN'
       EXPORTING
            jobname          = jobname
       IMPORTING
            jobcount         = jobcount
       EXCEPTIONS
            cant_create_job = 1
            invalid_job_data = 2
            jobname_missing = 3
            OTHERS           = 4.
IF sy-subrc <> 0.
    MESSAGE i003(zmapas).
    EXIT.
ENDIF.
SUBMIT z_mapa_execucao_orcamental
         VIA JOB jobname NUMBER jobcount
         WITH ano EQ ano
         WITH so_perio IN so_perio
         WITH so_date IN so_date
         WITH so_org EQ so_org
         WITH so_num IN so_num
         AND RETURN.
IF stdt_output-startdttyp EQ 'I'.
    CLEAR job_imediate.
    job_imediate = 'X'.
ENDIF.
CALL FUNCTION 'JOB_CLOSE'
       EXPORTING
            calendar_id                 = stdt_output-calendarid
            event_id                    = stdt_output-eventid
            event_param                 = stdt_output-eventparm
            event_periodic              = stdt_output-periodic "?
            jobcount                    = jobcount
            jobname                     = jobname
            laststrtdt                  = stdt_output-laststrtdt
            laststrttm                  = stdt_output-laststrttm
            prddays                     = stdt_output-prddays "??
            prdhours                    = stdt_output-prdhours "?
            prdmins                     = stdt_output-prdmins "??
            prdmonths                   = stdt_output-prdmonths
            prdweeks                    = stdt_output-prdweeks "?
            predjob_checkstat           = stdt_output-checkstat
            pred_jobcount               = stdt_output-predjobcnt
            pred_jobname                = stdt_output-predjob
            sdlstrtdt                   = stdt_output-sdlstrtdt
            sdlstrttm                   = stdt_output-sdlstrttm
            strtimmed                   = job_imediate
            targetsystem                = stdt_output-instname
            start_on_workday_not_before = stdt_output-notbefore
            start_on_workday_nr         = stdt_output-wdayno
            workday_count_direction     = stdt_output-wdaycdir
       IMPORTING
            job_was_released            = job_release
       EXCEPTIONS
            cant_start_immediate        = 1
            invalid_startdate           = 2
            jobname_missing             = 3
            job_close_failed            = 4
            job_nosteps                 = 5
            job_notex                   = 6
            lock_failed                 = 7
            OTHERS                      = 8.
IF sy-subrc <> 0.
    MESSAGE i003(zmapas).
    EXIT.
ELSE.
    MESSAGE i004(zmapas) WITH jobname.
ENDIF.
Thanks in advance,
Best Regards
João Martins

Hello João.
In debug mode, check the value of variables you passed to parameters sdlstrtdt and sdlstrttm.
As aditional info, I usually achieve your goal without FM BP_START_DATE_EDITOR.
Check this code:
CALL FUNCTION 'JOB_OPEN'
      EXPORTING
           jobname          = w_jobname
      IMPORTING
           jobcount         = w_jobcount
      EXCEPTIONS
           cant_create_job = 1
           invalid_job_data = 2
           jobname_missing = 3
           OTHERS           = 4.
CHECK sy-subrc = 0.
CLEAR seltab_wa.
MOVE: t_jobs-param TO seltab_wa-selname,
t_processar-line+34 TO seltab_wa-low.
APPEND seltab_wa TO seltab.
seltab_wa-selname = 'P_LOJA'.
seltab_wa-low = t_processar-ficheiro+7(4).
APPEND seltab_wa TO seltab.
*** Submete o programa para o JOB
SUBMIT (t_jobs-repid)
WITH SELECTION-TABLE seltab
USER sy-uname
   VIA JOB w_jobname NUMBER w_jobcount
   AND RETURN.
*** Encerra o JOB
l_hora = sy-uzeit.
ADD 60 TO l_hora.
CALL FUNCTION 'JOB_CLOSE'
   EXPORTING
      jobcount           = w_jobcount
      jobname           = w_jobname
      sdlstrtdt            = sy-datum
      sdlstrttm           = l_hora
      targetserver       = w_servidor
   IMPORTING
      job_was_released     = l_liberado
   EXCEPTIONS
      cant_start_immediate = 1
      invalid_startdate    = 2
      jobname_missing      = 3
      job_close_failed     = 4
      job_nosteps          = 5
      job_notex            = 6
      lock_failed          = 7
      OTHERS               = 8.
Regards.
Valter Oliveira.

Job for transaction PBA6

Hi,
I'm trying to create a job for transaction PBA6 (program RPAPRT02) but once I get the list of all the activities I should complete I don't know how to select them all and execute de program SAPMSSY0.
Any idea?
Thanks

Hi,
Did you try to make a Parallel Processing referred to RFC?
Maybe this link can help you.
[http://help.sap.com/saphelp_nw04/helpdata/en/22/0425c6488911d189490000e829fbbd/content.htm]

How to create a background job for call transaction

hi gurus
can any one suggest me
how to create the background job for call transaction.
thank you
regards
kals.

Hi,
Refer
https://forums.sdn.sap.com/click.jspa?searchID=10926107&messageID=889652
Regards
Kiran Sure

Can ABAP proxy to consume WSDL file be run as background job for every10min

Hi all,
I have a requirement where I need to build an interface which gatheru2019s the purchase order details and send to external third party software in their required format (as an XML file).
So I should be the first point of contact and should trigger the interface each time a purchase order is generated.
So I am thinking that I should develop a background job for every 10 minutes which will look for new purchase orders and gathers the information of the purchase orders and send them to external third party software in their required format.
I have gone through all the SAP forums and e-Learning but still I have confusion in regards to how is it possible technically? Can some one guide me with some information on the same.
I have a little bit of confusion and want to know few things.
1)     Should I create a web service or should I consume a web service?
2)     If I need to consume a web service, then can I write an ABAP proxy to be run in background fro evry 10 minutes? I mean can we run ABAP proxy as a batch job in the background?
3)     Is there a difference between consuming an XML file and WSDL File?
Any Help will be highly appreciated.
Regards,
Jessica.

There are two options (as I know) to generate XML file.
1. Use XML TRANSFORMATION to get the XML string based your TRANSFORMATION. You can input your data and get back the XML string. Download this string to a file
Test XML generation program is:
types: begin of ty_data,
       num   type i,
       end   of ty_data.
DATA: itab TYPE standard table of ty_Data,
      la_data like line of itab,
      xmlstr TYPE string.
DO 3 TIMES.
la_data-num = sy-index.
APPEND la_data TO itab.
ENDDO.
CALL TRANSFORMATION ztest_np1
SOURCE table = itab
RESULT XML xmlstr.
CALL FUNCTION 'DISPLAY_XML_STRING'
EXPORTING xml_string = xmlstr.
My ZTEST_NP1 transformation. To create a transformation, click on the transformation in the "CALL TRANSFORMATION ztest_np1" statement. Select Simple transformation type.
<?sap.transform simple?>
<tt:transform xmlns:tt="http://www.sap.com/transformation-templates">
<tt:root name="table"/>
<tt:template>
    <table>
      <tt:loop ref=".table">
        <item>
          <tt:value ref="NUM"/>
        </item>
      </tt:loop>
    </table>
</tt:template>
</tt:transform>
XML string is like:
<?xml version="1.0" encoding="utf-8" ?>
<table>
<item>1</item>
<item>2</item>
<item>3</item>
</table>
To use this option, you have to create a transformation and than use it to generate the XML string.
Check this SAP Help
http://help.sap.com/saphelp_nw04s/helpdata/en/e3/7d4719ca581441b6841f1054ff1326/frameset.htm
2. You can concatenate and create an XML string and download that string into a file.
Regards,
Naimesh Patel

Create Background jobs

How can i create background jobs and link them to the Event so that they will be triggered? I have no clue on this, can anyone explain in a detailed manner with the Transaction codes for each.
Thanks in advance.

Hi laitha,
JOB is a program which starts to a determined point of time and executes some standard programs in the system. JOBs can be planed to a determined point of time on the regular basis (every night, for example) or to some discret time moments. So, the JOB can be planed and then will be started automatically without the manual start.
Realtime programs are understood in the most cases as actual program execution which is started by somebody to the actual moment of time.
Typically per JOBs some special processes will be started that should be executed automatically and regularly: for example, IDOC application, some correction reports, statistic updates etc.
Standard jobs are those background jobs that should be run regularly in a production SAP System These jobs are usually jobs that clean up parts of the system, such as by deleting old spool requests.
Use
As of Release 4.6C, the Job Definition transaction ( sm36 ) provides a list of important standard jobs, which you can schedule, monitor, and edit.
Standard jobs are those background jobs that should be run regularly in a production SAP System. These jobs are usually jobs that clean up parts of the system, such as by deleting old spool requests.
for more information you can go thru the following thread:
http://help.sap.com/saphelp_nw70/helpdata/en/24/b884388b81ea55e10000009b38f842/frameset.htm
About Events:
Events have meaning only in the background processing system. You can use events only to start background jobs.
Triggering an event notifies the background processing system that a named condition has been reached. The background processing system reacts by starting any jobs that were waiting for the event.
Types of Events:
There are two types of events:
1.)System events are defined by SAP. These events are triggered automatically when such system changes as the activation of a new operation mode take place.
2.)User events are events that you define yourself. You must trigger these events yourself from ABAP or from external programs. You could, for example, signal the arrival of external data to be read into the SAP system by using an external program to trigger a background processing event.The event scheduler processes an event if the event is defined in the system.
For example, if a system (System 1) receives an event from another system (System 2), the event scheduler of System 1 processes the event only if it is defined in System 1. That event does not need to be defined in System 2 (the sending system).
You define an event by assigning a name (EVENTID) to it. When defining an event, you do not define the event arguments.
for more information you can go thru the following thread:
http://help.sap.com/saphelp_nw04s/helpdata/en/fa/096e2a543b11d1898e0000e8322d00/frameset.htm
When you schedule the process chain or infopackages the jobs associated with it run in the background mode. In case you want to create a job for a specific activity you can do so in SM36. You would be creating jobs that would get executed in any one of the options:
1. Immediate
2. Date & Time
3. After event.
4. After job.
5. At Operation mode.
In case you want to view the job logs go to sm37.
_List of Background Jobs_
BIREQU - Load of a Request/Reconstruction of a request
BI_AGGR4 - Aggregates activation
BI_BTCH - Any batch job like ABAP program run in background
BI_DELR - Deletion of request
BI_HIER - Hierarchy loading/activation
BI_ODSA - ODS activation
BI_PROCESS_ABAP - ABAP program in process chain
BI_PROCESS_LOADING - Data Loading in process chain using nfopackage
BI_PROCESS_ODSACTIVAT - ODS actiavation in Process chain
BI_PROCESS_TRIGGER - Trigger job for process chain
BI_PSAD - probably PSA deletion
BI_STAT - Building statistics
BI_STRU - Change run job
BI_WRITE_PROT_TO_APPLLOG - Application log job
RANATL_ACCT_CACHE_WARMUP
Use tcode SM62 to create User events.
Use tcode SM64 to trigger the event.
Wizards for Event Creation :pls chk this link
http://help.sap.com/saphelp_erp2005vp/helpdata/en/f7/d1c20a02d511d3a6550060087a79ea/frameset.htm
*pls assign points,if info is useful**
Regards
CSM reddy

Program for Background Job for COGI

Does anyone know what is the Program name for creating background job to run COGI? I'm using CORUAFFW to create variants and run the program but its not working as I guess it isonly generating the report but not deleting the records if inventory is added.
Thanks
Mama
Edited by: Amit Raichura on Mar 21, 2008 1:31 AM

Amit,
Use Program "CORUAFWP" to schedule background job to post COGI error records if the error is corrected, as in your case stock is corrected.
Regards,
Prasobh

Error in Schedule Background Job for Deadline Monitoring of swu3

While Auto Customization swu3 i am getting error message 'Output device "" not known' in 'Schedule Background Job for Deadline Monitoring'
Please advice what could be cause of it

the earlier problem of background job was solved by changing the output device assigned to user wf-batch .
regarding the transport request :
when i was trying to execute the step : "Schedule bakgrd for missed deadlines " MANUEL it was giving me an option of SAVE AND SCHEDULE . which was creating the transport request . but when i executed it automatically it worked fine without asking a request to me ... i don't know why )-: ... probablly we can specify a different interval then the standard of three minutes and which will be transported (it's just a guess) . i have executed it automatically ...
well thanks all for u r help

Create background job

Hi,
is it possible to create background job of a program with POO, i had a look on class, i found CL_BP_ABAP_JOB or CL_BP_JOB but i don't use them.
Otherwise i will use 'JOB_OPEN' but i like POO
Can you help me ?

I answer myself...
The class to use is cl_bp_abap_job.

Unable to create Background job

Hi All,
I am trying to create a background job for standard program RFBIBL00 from a client QP1-231. But I am not able to do it as I am getting a message that the client differs from the original client qp1-020.
I AM ABLE TO CREATE THE BACKGROUND JOB FROM QP1-020,but not from QP1-231.
Please look into the matter and let me know why I am not able to creat the job from QP1-231.
I promise to reward.

Hi,
Please check with your basis team whether you have authorization for the same.
Raghav

Background job for user synch in comliance calibrator not working

Hi Gurus,
When I am trying to execute the background job for User Sync from "Schedule Ananlysis" I am getting an error. Can anyone help . I am putting the log
Nov 17, 2008 6:06:49 AM com.virsa.cc.xsys.bg.BgJobDaemon init
INFO: *** BgJobDaemon loaded
Nov 17, 2008 6:07:07 AM com.virsa.cc.common.util.ConnectionUtil getConnection
FINEST: retry: 60Object not found in lookup of BC_ADM.
com.sap.engine.services.jndi.persistent.exceptions.NameNotFoundException: Object not found in lookup of BC_ADM.
     at com.sap.engine.services.jndi.implserver.ServerContextImpl.lookup(ServerContextImpl.java:649)
     at com.sap.engine.services.jndi.implclient.ClientContext.lookup(ClientContext.java:344)
     at com.sap.engine.services.jndi.implclient.OffsetClientContext.lookup(OffsetClientContext.java:254)
     at com.sap.engine.services.jndi.implclient.OffsetClientContext.lookup(OffsetClientContext.java:271)
     at javax.naming.InitialContext.lookup(InitialContext.java:347)
     at javax.naming.InitialContext.lookup(InitialContext.java:347)
     at com.virsa.cc.common.util.ConnectionUtil.getConnection(ConnectionUtil.java:32)
     at com.virsa.cc.xsys.bg.bo.BgSchedulerBO.getLogSpoolPath(BgSchedulerBO.java:605)
     at com.virsa.cc.xsys.bg.bo.BgSchedulerBO.getSpoolDirectory(BgSchedulerBO.java:588)
     at com.virsa.cc.xsys.riskanalysis.AnalysisDaemon.<clinit>(AnalysisDaemon.java:51)
     at com.virsa.cc.comp.BgJobInvokerView.wdDoModifyView(BgJobInvokerView.java:322)
     at com.virsa.cc.comp.wdp.InternalBgJobInvokerView.wdDoModifyView(InternalBgJobInvokerView.java:1135)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.doModifyView(DelegatingView.java:78)
     at com.sap.tc.webdynpro.progmodel.view.View.modifyView(View.java:337)
     at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.doModifyView(ClientComponent.java:481)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doModifyView(WindowPhaseModel.java:551)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:148)
     at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:321)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:46)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process

check out the notes 999785 note have u followed the instructions as told in the article "https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a07b4cc8-1a57-2b10-1798-d2fec068473a" .please follow the prerequisites check and follow the post installation check list .there is a article out there for post installation.
Edited by: Ambarish annapureddy on Mar 11, 2009 1:28 PM

Program works but background job for that program fails....

I have a requirement where I have to collect the details of the purchase order and put the details in XML file format and FTP the XML file to an external third party FTP Server.
To realize this I developed a report program which follows following logic.
1)     First I collected the PO details by calling the BAPI BAPI_PO_GETDETAIL1.
2)     Then using the following link "/people/r.eijpe/blog/2005/11/10/xml-dom-processing-in-abap-part-i--convert-an-abap-table-into-xml-file-using-sap-dom-approach
I converted these PO details to the XML file format that the third party people accept.
       In the code I used u201CCALL METHOD cl_gui_frontend_services=>gui_downloadu201D and in this process first the XML file is generated and is getting stored on my deskytop.
3)     Then I called HTTP_SCRAMBLE, FTP_CONNECT, FTP_COMMAND , FTP_DISCONNECT and RFC_CONNECTION_CLOSE.
This works perfectly well and each time I execute the report the file is getting FTPu2019ed to the third party FTP server.
Now I tried to schedule a batch job for this and the batch job fails with follwing errors
02/25/2009 15:08:47 Error in Control Framework
Message Class = FES
Message Number = 022
Message Type   = E
02/25/2009 15:08:47 Job cancelled after system exception ERROR_MESSAGE
Message Class = 00
Message Number = 564
Message Type   = A
Can some one tell me what is going wrong. My report works perfect in front end but fails if I try to schedule a background job for it in SM36.
Can you please tell me whatz going wrong with batch job? Any Help is highly appreciated.
Regards,
JEssica SAm

Robert...Thanks for the reply...
I am using follwing code
l_xml_size = l_ostream->get_num_written_raw( ).
    CALL METHOD cl_gui_frontend_services=>gui_download
      EXPORTING
        bin_filesize = l_xml_size
        filename     = FILEPATH
        filetype     = 'BIN'
      CHANGING
        data_tab     = l_xml_table
      EXCEPTIONS
        OTHERS       = 24.
    IF sy-subrc <> 0.
      MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
Now what changes should i make..where should i store my XML file then instead of my desktop?
and whih Function Module should i Use..

Creating a job for a procedure with an input parameter

Hi,
I want to create a job for a procedure ( sp_proc ) with a input parameter.
The input parameter is a date value.
As per the syntax for dbms_job.submit procedure;
dbms_job.submit (
job IN BINARY_INTEGER,
what IN VARCHAR2,
next_date IN DATE,
interval IN VARCHAR2 DEFAULT 'NULL',
no_parse IN BOOLEAN DEFAULT FALSE);
How should the procedure be declared in the 'what' parameter of the dbms_job.submit procedure ?
Please guide.
Thanks.

Hi,
You are wright, I have found this thread [DBMS_JOB -- how to pass parameters to the job|http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:351033761220].
Regards,

Is there a possibility create background jobs for transaction SP01?

Similar Messages

Maybe you are looking for