Is there a solution for iphone 4 too like iphone5, It doesnt have tab Cellular. How to check call duration for total dialled calls (after resting) on a particular day?
How to check call duration for total dialled calls (after resting) on a particular day in iphone 4?
Is there a solution like iphone 5, i.e.Settings > Cellular.
if the device is unlocked cellular is called mobile
Similar Messages
-
The wifi at my school isn't very good. And I can't send iMessages through it. It works for some apps like score center and my radar app, but doesn't work for other apps like clash of clans and iMessage. How can I get it to work on my school wifi. I have an iPhone 4S on AT&T and iOS 7.04
In a roaming network, your "main" router is the device that would require port mapping/forwarding to be configured in order to access the IP camera from the Internet. This router is also the one that would be provide the private IP address for the camera which you will want to be a static one.
So as you described your network, the IP cameras should be getting an IP address or you assigned it a static one and this is the address that you would enter in the Private IP address (or equivalent depending on the router used) field when setting up port mapping.
If you are not able to access this camera from the local network, then this should be troubleshot first. -
Is there an online version of ichat, like what google clients have ie the google chat
is there an online version of ichat, like what google clients have ie the google chat
Not tried it yet
http://www.aol.com/av/
10:29 PM Friday; October 14, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb( 10.6.8)
Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images." No, Seriously -
OK... so now I can pin a tab so it will always be there... so what the heck happen to all my tabs that were pinned? Worked fine for awhile so now what...???????
App (pinned) tabs and Tab Groups (Panorama) are stored as part of the session data [1] in the file sessionstore.js [2] in the Firefox profile folder [3].
Make sure that you do not use "Clear Recent History" to clear the "Browsing History" when Firefox is closed because that prevails and prevents Firefox from opening tabs from the previous session.
* https://support.mozilla.com/kb/Clear+Recent+History
* [1] http://kb.mozillazine.org/Session_Restore
* [2] http://kb.mozillazine.org/sessionstore.js
* [3] http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox
It is also possible to use:
* [http://kb.mozillazine.org/Menu_differences Firefox/Tools > Options] > General > Startup: "When Firefox Starts": "Show my windows and tabs from last time"
If you use cleanup software like CCleaner then make sure that Session is unchecked in the settings for the Firefox application. -
i want to know business application to be downloaded from app store for iphone 3g, i want to know business application to be downloaded from app store for iphone 3g
1. If you downloaded it for free the first time it should then be free for you forever to re-download and update.
2. If the app is no longer on the store then you cannot re-download it, I suggest you save an extra copy of the one you already have. I know I backed up my precious phonesabre.
3. Updating/installing directly on the iPhone has always gone fine for me. I didn't know there were issues. -
What is the preferred virus scan program for iphone? I believe that I have a virus. My phone will come on by itself and it appears to be recording audio. I have read about spyware/surveilance viruses that will record audio and take photos.
My phone is not jailbroken. I don't know what you mean about hacked. Maybe it is hacked? This is what is happening: About three times over the past few months I've noticed that my phone while "off" will come on (light up) and the screen shows an arrow towards the bottom; an arrow such that you would see on various "players" in order to "play" video or audio, I've searched my phone and cannot find any app that produces this particular screen though. Once I pick up the phone when this screen myseriously appears out of nowhere and press anything, it goes away and goes to the standard "slider" front page to unlock the phone.
-
i want to know how much this will cost. the phone resets every 3 minutes,
Out-of-Warranty Service
If you own an iPhone that is ineligible for warranty service but is eligible for Out-of-Warranty (OOW) Service, Apple will service your iPhone for the Out-of-Warranty Service Fee listed below.
Please note Out-of-Warranty Repair Service fees from your carrier may be different than those listed below.
iPhone Model
Out-of-Warranty Service
iPhone 4S
£ 146.44
iPhone 4, iPhone 3GS,
iPhone 3G, Original iPhone
£ 126.44
The Out-of-Warranty Service Fee includes a £ 7.44 shipping fee, which applies only if service is arranged through Apple and requires shipping. All fees are in British pound sterling and include VAT. iPhone Out-of-Warranty Service may also be available from your wireless carrier. Pricing may vary.
When setting up out-of-warranty service, Apple will request credit card pre-authorisation for the maximum service fee listed above. This amount will be deducted from your credit limit. The final service fee we charge will be determined during testing and may be less than the service fee listed above.
Certain damage is ineligible for out-of-warranty service, including catastrophic damage, such as the device separating into multiple pieces, and inoperability caused by unauthorized modifications. However, an iPhone that has failed due to contact with liquid may be eligible for out-of-warranty service.
Apple reserves the right to determine whether or not your iPhone is eligible for Out-of-Warranty service. iPhones that are repaired or replaced have a 90-day limited hardware warranty or assume the remainder of your standard warranty or AppleCare Protection Plan for iPhone coverage, whichever is longer. Please see Apple's Repair Terms And Conditions for further details.
If you have an iPhone that Apple determines is not repairable, you may wish to contact your carrier for other options. -
How to check with table for cursor..?
How to check with table for cursor..?
Here I have Table temp_final_plan
Here i want to update if already exit...below is the procedure....
CREATE OR REPLACE PROCEDURE spu_final_profit_plan
AS
-- Constant declarations
ln_errnum number := 0;
-- Variable declarations
ls_errmsg app_errors.err_msg%TYPE;
ls_appmsg app_errors.app_msg%TYPE;
ls_appid app_errors.app_id%TYPE;
-- Cursor declaration for final_update_el
CURSOR cur_final_update_el IS
select '910' ent,
'9127316' center,
post_acct,
sum(avg_mtd_01) sum_avg_mtd_01,
sum(avg_mtd_02) sum_avg_mtd_02,
sum(avg_ytd_01) sum_avg_ytd_01,
sum(avg_ytd_02) sum_avg_ytd_02
from mon_act_cypy
where rec_type = 'A'
and sum_flag = 'D'
and yr = '2008'
and substr(ctr_or_hier, 1, 2) = 'el'
and ent || sub_ent in
(select ent || sub_ent
from ent_ref
where roll_ent || roll_sub_ent = '999100')
group by post_acct
having sum(avg_mtd_01) <> 0
or sum(avg_mtd_02) <> 0
or sum(avg_ytd_01) <> 0
or sum(avg_ytd_02) <> 0;
-- Cursor declaration for final_update
CURSOR cur_final_update IS
select b.plan_ent b_plan_ent,
b.plan_ctr b_plan_ctr,
a.post_acct a_post_acct,
sum(a.avg_mtd_01) sum_avg_mtd_01,
sum(a.avg_mtd_02) sum_avg_mtd_02,
sum(a.avg_ytd_01) sum_ytd_mtd_01,
sum(a.avg_ytd_02) sum_ytd_mtd_02
from mon_act_cypy a,
plan_unit_tbl b
where a.ent || a.ctr_or_hier = b.ent || b.ctr_or_hier
and a.rec_type = 'A'
and a.sum_flag = 'D'
and a.yr = '2008'
and b.hier_tbl_num = '001'
and a.ent || a.sub_ent in
(select ent || sub_ent
from ent_ref
where roll_ent || roll_sub_ent = '999100')
group by b.plan_ent, b.plan_ctr, a.post_acct
having sum(a.avg_mtd_01) <> 0
or sum(a.avg_mtd_02) <> 0
or sum(a.avg_ytd_01) <> 0
or sum(a.avg_ytd_02) <> 0;
-- Begin the procedure body
BEGIN
-- Insert / Update final profit plan for final_update query using cursor
FOR rec_final_update_el IN cur_final_update_el
LOOP
EXIT WHEN rec_final_update_el%NOTFOUND;
IF rec_final_update_el. THEN
UPDATE temp_final_plan
SET sum_avg_mtd_01 = rec_final_update_el.sum_avg_mtd_01,
sum_avg_mtd_02 = rec_final_update_el.sum_avg_mtd_02,
sum_avg_ytd_01 = rec_final_update_el.sum_avg_ytd_01,
sum_avg_ytd_02 = rec_final_update_el.sum_avg_ytd_02,
WHERE ent = rec_final_update_el.ent
AND center = rec_final_update_el.center
AND post_acct = rec_final_update_el.post_acct;
ELSE
INSERT INTO temp_final_plan VALUES(rec_final_update_el.ent,
rec_final_update_el.center,
rec_final_update_el.post_acct,
rec_final_update_el.sum_avg_mtd_01,
rec_final_update_el.sum_avg_mtd_02,
rec_final_update_el.sum_avg_ytd_01,
rec_final_update_el.sum_avg_ytd_02);
END IF;
END LOOP;
-- Insert / Update final profit plan for final_update query using cursor
FOR rec_final_update IN cur_final_update
LOOP
EXIT WHEN rec_final_update%NOTFOUND;
IF rec_final_update. THEN
UPDATE temp_final_plan
SET sum_avg_mtd_01 = rec_final_update.sum_avg_mtd_01,
sum_avg_mtd_02 = rec_final_update.sum_avg_mtd_02,
sum_avg_ytd_01 = rec_final_update.sum_avg_ytd_01,
sum_avg_ytd_02 = rec_final_update.sum_avg_ytd_02,
WHERE ent = rec_final_update.b_plan_ent
AND center = rec_final_update.b_plan_ctr
AND post_acct = rec_final_update.a_post_acct;
ELSE
INSERT INTO temp_final_plan VALUES(rec_final_update.b_plan_ent,
rec_final_update.b_plan_ctr,
rec_final_update.a_post_acct,
rec_final_update.sum_avg_mtd_01,
rec_final_update.sum_avg_mtd_02,
rec_final_update.sum_avg_ytd_01,
rec_final_update.sum_avg_ytd_02);
END IF;
END LOOP;
-- EXCEPTION handling section
EXCEPTION
-- Fire OTHERS Exception case by default
WHEN OTHERS THEN
-- ROLL BACK Transaction, if any failure
ROLLBACK;
ln_errnum := SQLCODE;
ls_errmsg := SUBSTR(SQLERRM, 1, 100);
-- Log the ERRORS into APP_ERRORS table using SPU_LOG_ERRORS procedure
spu_log_errors(ln_errnum, ls_errmsg, ls_appid, ls_appmsg);
-- End of the stored procedure
END spu_final_profit_plan;
[\pre]I'm not sure what you mean by, 'How to check with table for cursor..?' but I'll offer a comment on your Code Snippet. I think you want to know how to check if a record exists so you know if you need to perform an INSERT or an UPDATE.
Here is a snippet of your code. I'll put my comments in "Comment" style in your code.
-- Insert / Update final profit plan for final_update query using cursor
FOR rec_final_update_el IN cur_final_update_el
LOOP
/* There is no need to test for %NOTFOUND since you are using Cursor FOR Loop!
** This construct automatically exits when the last record is processed. */
EXIT WHEN rec_final_update_el%NOTFOUND;
/* Is this where you would like to know how to Check if the record already exist??
** I asked this because, 'rec_final_update_el.' is not valid syntax. Are you looking for
** an Cursor Attribute or Method you can check here?
** I would suggest a Primary Key or Unique Index on ENT, CENTER, and POST_ACCT
** on the TEMP_FINAL_PLAN table. Then simply perform an INSERT and code an
** Exception to UPDATE when you get a DUP_VAL_ON_INDEX exception. Otherwise,
** you will need to simply run an Implicit or Explicit Cursor to test if the row exists and
** use this return value to determine if you should INSERT or UPDATE. */
IF rec_final_update_el. THEN
UPDATE temp_final_plan
SET sum_avg_mtd_01 = rec_final_update_el.sum_avg_mtd_01,
sum_avg_mtd_02 = rec_final_update_el.sum_avg_mtd_02,
sum_avg_ytd_01 = rec_final_update_el.sum_avg_ytd_01,
sum_avg_ytd_02 = rec_final_update_el.sum_avg_ytd_02,
WHERE ent = rec_final_update_el.ent
AND center = rec_final_update_el.center
AND post_acct = rec_final_update_el.post_acct;
ELSE
INSERT INTO temp_final_plan VALUES(rec_final_update_el.ent,
rec_final_update_el.center,
rec_final_update_el.post_acct,
rec_final_update_el.sum_avg_mtd_01,
rec_final_update_el.sum_avg_mtd_02,
rec_final_update_el.sum_avg_ytd_01,
rec_final_update_el.sum_avg_ytd_02);
END IF;
END LOOP;I hope I've answered your question, but if I haven't please provide more details so we can better understand your request.
Craig... -
okay so i recorded a song but each part comes out as like take 1, i have 10 takes. how can i put them all together as one take, to make one song all in one take not small pieces of a song. like i hit record and sang the entire song but when i hit play it was in pieces not just one song like it was in ten takes. is there any way i can blend it all into one take, to make one clear song?
You're not very clear in stating your problem. Maybe it's terminology: "takes" in recording lingo (and in GB lingo) are different version of exactly the same part in a song, so you only want one of them in the end. Please tell us exactly what you did and what it is that you don't like.
-
HT2305 i have iphone 4s but i don't have facetime app how i can set up in my Mobile
i have iphone 4s but i don't have facetime app how i can set up in my Mobile
i have iphone 4s but i don't have facetime app how i can set up in my Mobile
Setup is in the "Settings" menu. The FaceTime app is built into the telephone application and can be accessed via the contacts list if available for use between you and your recipient. -
itunes is copying/converting 500gb of music from .wma to .m4a files that are on an external drive onto my laptop which doesnt have enough room. how do i reroute these newly converted files somewhere with enough space for them?
new to itunes, used windows media player before that and always ripped music directly to an external hardrive and accessed it through the player. now that i downloaded itunes it is taking from the external hardrive and copying a second file for each song onto my lap top hard drive which does not have the capacity for all my music. as itunes converts music files i want them saved back onto my external drive or another location i have space for rather than the lap top. how do i change the setting to move the itunes media folder to another location. assuming that hitting copy and past and dropping it in a random location will cause a few errors.When I have done this, all I did was network the two machines and copy the contents of the iTunes folder to the other machine, and that's it.
My understanding (which may not be 100% correct) is that the one file that is absolutely necessary is iTunes Library, and that the XML file is actually a copy auto-generated from the iTunes Library, appearing in a different format only for non-iTunes apps that take advantage of the iTunes Library data.
As far as I know, if you simply have the Library (database) file and all your original music files, iTunes on that computer should operate as it did on your old computer. I believe that the Album Artwork, Genius Data, and XML files can be regenerated from the Library file. Not sure about the Extras file. -
Hello, for a multilingual catalog project I would have to know how and with what tool I can place text from Excel or a database in text frames / tables. The basic idea is to provide the text box with an ID (eg << text_eng_art_nr_987654>>) and above to make the connection. Does anyone have a tip. Thanks in advance !!!
BerndData merge is really useful in many circumstances, but my first question would be about the size of the project. A really large catalog might be better handled by processing an IDML in some kind of translation memory tool.
If all of your multilingual content is already in Excel, then it's probably best handled with a Data Merge. Note that you can't save Unicode CSV out of Excel for the merge, so for many languages you'll need to save "Unicode Text" out of Excel and tweak your import settings when you select a Data Source for encoding (Unicode) and delimiter (tab instead of comma). -
if im selling music on itunes do i get paid for streams to ? or just when someone buys a song ? jw because other websites pay for streams to and i cant find anything that says how much i tunes pays for streams
The program can't start because MSVCR80.dll is missing from your computer
Many thanks. Rather than the Apple document, I currently recommend using the instructions from the following user tip with that one:
Troubleshooting issues with iTunes for Windows updates -
Is there a solution to iphone app sync stopping after step 3?
Is there a solution to the fact that the iphone app sync stops after step 3 in ITunes?
if the device is unlocked cellular is called mobile
-
I am having problems renting a movie from the apple TV. The download only goes to 46%. I have tried changing the resolution to 720, I have gone to the settings and check for rentals it advises that there is no additional rentals found.
Any suggestions.You have to go to SMTP settings for your email account and enter a password there. Sended and receiving are two different activities managed by 2 differet servers, and each may require a separate user ID and password.
Maybe you are looking for
-
Interacting with flash via a loaded text?
Here's my problem: I have a project with loads of text ergo I am loading text from external files with html formating. Now I have to insert videos linked to the text file too (as in "dolor ipsum ... press here to view video"). All I need is a code th
-
HELP!! my Zen Micro isnt getting recognized by my
When I try to register my Micro, it says that it isn't connected. It also happens when I go into Media Explorer also. Any known fixes for this? Thanks...
-
Help! I am very new at PL/SQL and need some help understanding why this cusror declare won't work in PORTAL: deptno_p number; cursor emp_cur is select ENAME from SCOTT.EMP where DEPTNO = deptno_p; when I try and save this in portal the following mess
-
Itunes will not launch--says it is missing the Itunes file
I have windows XP pro SP2 and have downloaded itunes 7.6 which now will not launch with error message about "missing itunes/itunes music file" which theoretically should be in My music folder. have uninstalled several time but alas no help. have crea
-
On an older cruzer micro 8 GB device, if I rt click and show properties, there is a security tab, which I can use to limit the number of people who have access to the data on the device. On a recently purchased Cruzer Glide USB flash drive, there is