Is there a task switch event for iOS? Like Event.DEACTIVATE for Android

Hello,
I need to be able to trigger a function when someone presses the front facing button that has the square in it on an iDevice.
I've tried:
NativeApplication.nativeApplication.addEventListener(Event.DEACTIVATE, quitApplication);
This doesn't work on iOS but it does work on Android.
Anyone have an idea what to do?
-Scott

Hi,
If you want to exit the application on pressing the Home button, set the following in the iPhone section of application xml:
<key>UIApplicationExitsOnSuspend</key>
<true/>
Thanks,
Sanika

Similar Messages

Why is there no Adobe Shape CC for Android?

Android is the majority of the smart phone market share. Why is there no Adobe Shape CC for Android? Is the app for Android in development?

It's pathetic that Adobe has not to my knowledge stepped forward to even address this for those of us paying. I firmly believe Android users should receive $10 off minimum their subscription price since we don't have full access to the service. People have been begging for over a year now to have the Apple Apps converted and used for Android systems.. Especially since Android as so many have pointed out, is the majority of the market. Adobe is dropping the ball big time, and at least acknowledging that we have asked this question over and over and letting us know WHY, we might be a little more forgiving. Why, why, WHY?!

Is there a reference test code for Android to see if GPU acceleration is working on a device or not?

The subject says it all:
Is there a reference test code (available for downloading) for Android to see if GPU acceleration is working on a device or not once the AIR RC1 with GPU is installed ?
Perhaps something 'like' away3d info panel which shows if GPU is active or not...
I will try to build one in the meantime. Just didnt want to reinvent the wheel here.
TIA for any pointers. //GH

I agree with the above posts, it would be great to have a place with a list of already known problems, and a way for those of us with the time and interest to participate in making the FiOS experience better. Several thoughts:
1) Send a PM to a moderator here asking to participate in a test, or asking for improvements to the Forum. I have done that, some of the improvements I suggested have occurred (thanks Kathleen and CharlotteS), hoping more will; it can't hurt. And I understand my request to be a beta tester has been forward to development. At least one poster put that kind of request in a forum post and I think his was also forwarded.
2) Go to the following Verizon Products Trial site and sign up to test new things: https://www36.verizon.com/MM/Protected/TestTrack/SignIn.aspx. No guarantees, not much on the site right now, but if you sign up you might get to participate in the future.
3) Consider using the Verizon Direct forum at http://www.dslreports.com to report problems rather than the FSC (or after a frustrating experience with the FSC). You have to be a registered user to post in that forum, but I have had a good experience using it. Verizon employees monitor the forum and respond, and only they and you can see the details of your and their posts (one of the things I have suggested to the moderators here is something like Verizon Direct here).
I am retired, I have time to put into an effort to improve FiOS TV. Plus I have quite a bit of experience in testing new computer hardware and software before announcment and/or delivery to customers (IBM), so I think I could help (and I really don't think I could hurt it...). Plus in two more days I will have had FiOS TV for three full years, I have gone through all of the good (and a little bad.....) along the way.
FWIW...
Justin
Verizon FiOS TV, Internet, and phone
IMG 1.5.0
Keller, TX

Is there any way in Firefox for android to use native handlers?

In Firefox for windows or Linux, I can register a URL handler (e.g. mailto:) but android takes this to a new level with intents which can register responders for individual URIs as well as for and mine types.
Are there any plans to natively support android intents (e.g. to handle a transition from twitter.com to the native twitter app), or perhaps an add-on to support something similar? I have already found https://addons.mozilla.org/en-US/android/addon/open-native-app/ but it's a manual process, rather than an automatic one.

http is a website, Firefox browses websites. We are not planning on kicking people to the native app for such things. We do support loading resources that list helper apps. For example if you load a Google Maps page there is an Android icon in the address bar that will take that page info and pass it to the Google Maps app.

Creating app for Android/Kindle with App builder and Single Edition (No professional or Enterprise)

Hi there,
I know there is no official support for Android in Single Edition, but, once you have installed Indesing CC and App Builder in a mac, and you create app from your Folio menu, is it possible to create then an Android/Kindle apk app for publishing by your own?
Has anybody published sucessfully in this way?
Other point, is that I suposse that you need a Professional or Enterprise licence to create an android app from the Web-enablet App Builder. Cause I can't find the way the make my single account to join the role to this function (And app builder website website just tells me I have to do this, as if I were able to do it with my license...).
By the way, I think Adobe should explain more clearly this points. There is too much documentation, but difficult to find this answers... And a lot of people with the same troubles...
Thanks!

Thanks Tomek!
So, can you confirm if you join the Professional edition (just for a month) if you are able to use both options App Builder/Web-Based App Builder, to create the app in a way that you don't need to be suscribed more time to Professional Edition to be downloaded by the users in Google Play/Kindle Store, and it should work for Applestore (iphone apps) too. I mean, once again, no using Multi-issue and Renditions, cause in this case I know they are hosted by Adobe and you need the subscription to be downloaded.
I think there are discussions here about this topic, but it's not exactly clear what I'm asking. So, I still don't know if I should buy the Professional Edition or go to another supplier as you said.
I hope that Adobe improve these functions! There should be native support for these platforms, cause at the end you only can publish to the applestore with the Single Edition and everbody knows the "too booky problem" with the apps. And we should have support to publish to ibookstore because of that too, without third party solutions.

Mobile BI for Android and Blackberry

Hello everyone,
is there Mobile BI App for Android/Blackberry? Any Documentations? Thank you very much in advance!
Regards, Marcin

Hi Marcin,
I dont think there is an app available for android yet.
However, for BB deploymet, you would have to install a BB mobile server.
This would help you to get the MobileOTA file deployed on your BB device.
Regards,
Atul

Deploy apk file for android to microsoft intune

Hi,
I came to know that there no wrapping tool available for Android.
i have created apk file using Eclipse IDE and assume that Android SDK, ADT tools are installed.
Can we deploy apk file to intune without wrapping tool?
if yes--> once deploy is done, Can we able to install the apk file in device?
assuming that: Compnay portal app installed, device is registered.
Regards,
Venkatesh

Hi,
Yes you can deploy it using Intune eventr without the Wrapping tool.
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

Why is there an odd delay when invoking the task switcher w/"Reduce motion" off?

Sometime after updating to iOS 7.1 (and 7.1.1), I noticed that when I double-clicked the home button in order to invoke the task switcher (and when I pressed on an app preview or icon in order to switch to it), that there was a 2-3 second delay before the task switcher actually appears (or I switch to the chosen app). What is doubly strange is that if I turn "reduce motion" to OFF in Settings > Accessibility, the delay goes away.
To make matters worse, a friend of mine with an "iPad 3" (i.e. the first iPad with a retina display) tells me that he does not see the delay. I've restored the iPad and set it up as a new iPad, yet the delay does not disappear.
Has anyone else observed this problem?

I see this problem as well.
There is a 2-second delay from when I hit the HOME button twice on my iPAD 2 before any of the open Apps appear.
There is also a lag when selecting some settings (ex. Wallpapers & Brightness ... about 2-3 seconds after I make the selection).
My Settings -> General -> Accessibility -> Reduce Motion is set to ON as well.

I have a Sony AC-U50AD charger can I use it on my ipod touch and ipad mini - there is a switch for "ipod"

I have a Sony AC-U50AD charger can I use it on my ipod touch and ipad mini - there is a switch for "ipod" - I've had the adapter for several years and I think it's ok for my ipod touch but since it pre-dates both of these products I want to try and make sure it's ok to use with them before I do use it. Thanks.

If iTunes does not see your iPod then your only hope is a data recovery company. Not cheap.
However, you may be able to get some photos by:
Photos
- If they are in an iPod backup then restore another iPOd, iPhone or iPad from that backup. See the restore topic of:
iOS: How to back up
- If you used PhotoStream then try getting them from your PhotoStream. See that topic of:
iOS: Importing personal photos and videos from iOS devices to your computer
- If they are in the iTunes backup then get them from the backup by:
Recover iPhone, iPad or iPod photos from backups with Picturescue
How to perform iPad recovery for photos, videos
Wondershare Dr.Fone for iOS: iPhone Data Recovery - Wondershare Official
http://www.amacsoft.com/ipod-data-recovery.html
iPod recovery software to restore lost music files

Xfce: Set Applikation icon for taskbar and task switcher

Hi Community,
I'm facing a Problem with icons in xfce: some applications don't seem to have the correct ones in the task switcher (alt+tab) and the task bar. A default icon is shown instead. This happens for example with gedit and urxvt.
Screenshot:
http://i.imgur.com/DsgNBRi.png
I use whisker menu as startmenu/appstarter and the icons are correct there. (They are also correct in Dockbarx)
How can I set icons for the taskbar/-switcher? Do I need icons with specific sizes in /usr/share/icons?
Thanks in advance!
-- mod edit: read the Forum Etiquette and only post thumbnails http://wiki.archlinux.org/index.php/For … s_and_Code [jwr] --
Last edited by ilike (2013-10-26 11:23:47)

Yeah, the problem seems to be quite common.
Similar Topics:
http://crunchbang.org/forums/viewtopic.php?id=14909
https://bbs.archlinux.org/viewtopic.php?id=167517
http://askubuntu.com/questions/292700/s … task-icons
http://forum.manjaro.org/index.php?topic=6432.0
Nethertheless, no solution suggested on these sites worked for me. ;(
I also reinstalled gedit (sudo pacman -Rns gedit && sudo pacman -S gedit) which didn't work and I created a new user account (and changed the themes) to preclude that something is wrong with the settings in my home directory. It's funny that xfce4-terminal displays the icon correctly in the taskbar/-switcher because it uses the same "Icon=utilities-terminal" setting as urxvt in its .desktop file in /usr/share/applications.
Edit: After reading this post I installed rxvt-unicode-patched (aur) instead of rxvt-unicode from community. The urxvt icon can be set now in the .Xdefaults-File:
URxvt*iconFile: /usr/share/icons/Moka/256x256/apps/utilities-terminal.png
The Icon-Setting in /usr/share/applications/urxvt.desktop seems to be applied only for the startmenu.
Last edited by ilike (2013-10-26 14:40:03)

Is there a maximum PDF size for ios? can handle 2GB?

I'm creating a very huge pdf file, aprox 2GB
can it be viewer in an ipad or iphone?.
Can it be viewer from an Android tablet?
TnkU

It sounds very doubtful because mobile devices are usually restricted in memory. And it will depend on each particular device. There is Adobe Reader software for both iOS and Android. Download the free software on each device and try it.
I'd divide your PDF into smaller files.

I need to edit a re-occurring event in calender on my iPhone and there is no edit button for that event. How do I edit or delete it?

I need to edit a re-occurring event in calender on my iPhone and there is no edit button for that event. How do I edit or delete it?

I am not sure how this works but it seems that it may be all or nothing.
To turn off Facebook events on your device:
Settings > Facebook > Calendars > Off
If you do not want to disable everything, maybe this thread will help:
https://discussions.apple.com/thread/4349443

Is there a way to observe/control iOS devices like ARD for desktops/laptops?

For desktops/laptops I can use Apple Remote Desktop to monitor (and control) devices remotely. This is very useful for supporting users.
I don't think there is such a thing for iOS devices, right? I do not mean VNC on an iOS device to observe/control a PC, but the other way around: use a PC to observe / control an iOS device remotely.

I have not heard of a way either.
Robert

OSD Task Sequence fails with "There are no task sequences available for this computer"

Let me preface this by saying that I have read at least 100 forum posts with people having similar issues. However, none of the solutions in those
posts have worked for me.
The Problem: SCCM 2012 R2 will not image unknown computers.
The task sequence gives the error "There are no task sequences available for this computer." As soon as that error occurs, SCCM places an Unknown entry into the All Systems collection. I have been imaging unknown computers, without fail, for
4 months and no environmental changes have been made. NOTE: I am using USB media, not PXE.
What I've Tried:
Checked for duplicate SMSBIOS GUIDS in the console, none.
Checked for duplicate MAC Addresses in the console, none.
Checked for expired certificates, none.
Recreated Boot Media, twice.
Deleted the Unknown entry and retried, SCCM just recreates the Unknown entry.
Deleted all of my task sequence deployments, and then redeployed them each to All Systems (Only Boot Media and PXE) and to Unknown Systems (Only Boot Media and PXE)
I have also ran the following in the SQL Server Management Studio;
SELECT
* FROM
ResPolicyMap WHERE
machineid = 0 and
PADBID IN
(SELECT
PADBID FROM PolicyAssignment
WHERE BodyHash
IS NULL)
No result
Select
* From
vMacAddresses Where
MacAddresses = '00:00:00:00:00:00'
This displays an entry for every time that I have tried to image the unknown machine attached to the MAC Address with a different ItemKey and SMS_Unique_Identifier for each entry.
Added the machine manually using Import Computer Information, immediately recognized the Task Sequences that I have advertised to the All Systems collection.
Any and all assistance is welcome, I am going on the third straight day of dead ends. Below I have tried my best to post the entire SMSTS Log;

LOGGING: Finalize process ID set to 744
==============================[ TSBootShell.exe ]==============================
Succeeded loading resource DLL 'X:\sms\bin\x64\1033\TSRES.DLL'
Debug shell is enabled
Waiting for PNP initialization...
RAM Disk Boot Path: MULTI(0)DISK(0)RDISK(0)PARTITION(1)\SOURCES\BOOT.WIM
WinPE boot path: C:\SOURCES\BOOT.WIM
Booted from removable device
Found config path C:\
Booting from removable media, not restoring bootloaders on hard drive
C:\WinPE does not exist.
C:\_SmsTsWinPE\WinPE does not exist.
Executing command line: wpeinit.exe -winpe
The command completed successfully.
Starting DNS client service.
Executing command line: X:\sms\bin\x64\TsmBootstrap.exe /env:WinPE /configpath:C:\
The command completed successfully.
==============================[ TSMBootStrap.exe ]==============================
Command line: X:\sms\bin\x64\TsmBootstrap.exe /env:WinPE /configpath:C:\
Succeeded loading resource DLL 'X:\sms\bin\x64\1033\TSRES.DLL'
Succeeded loading resource DLL 'X:\sms\bin\x64\TSRESNLC.DLL'
Current OS version is 6.2.9200.0
Adding SMS bin folder "X:\sms\bin\x64" to the system environment PATH
Failed to open PXE registry key. Not a PXE boot.
Media Root = C:\
WinPE boot type: 'Ramdisk:SourceIdentified'
Failed to find the source drive where WinPE was booted from
Executing from Media in WinPE
Verifying Media Layout.
MediaType = BootMedia
PasswordRequired = false
Found network adapter "Intel(R) Ethernet Connection I217-LM" with IP Address XXX.XX.XXX.XXX.
Running Wizard in Interactive mode
Loading Media Variables from "C:\sms\data\variables.dat"
no password for vars file
Activating Welcome Page.
Loading bitmap
WelcomePage::OnWizardNext()
Loading Media Variables from "C:\sms\data\variables.dat"
no password for vars file
Spawned thread 1008 to download policy.
Entering TSMediaWizardControl::GetPolicy.
Creating key 'Software\Microsoft\SMS\47006C006F00620061006C005C007B00350031004100300031003600420036002D0046003000440045002D0034003700350032002D0042003900370043002D003500340045003600460033003800360041003900310032007D00'
Environment scope successfully created: Global\{51A016B6-F0DE-4752-B97C-54E6F386A912}
Creating key 'Software\Microsoft\SMS\47006C006F00620061006C005C007B00420041003300410033003900300030002D0043004100360044002D0034006100630031002D0038004300320038002D003500300037003300410046004300320032004200300033007D00'
Environment scope successfully created: Global\{BA3A3900-CA6D-4ac1-8C28-5073AFC22B03}
Setting LogMaxSize to 1000000
Setting LogMaxHistory to 1
Setting LogLevel to 0
Setting LogEnabled to 1
Setting LogDebug to 1
UEFI: false
Loading variables from the Task Sequencing Removable Media.
Loading Media Variables from "C:\sms\data\variables.dat"
Succeeded loading resource DLL 'X:\sms\bin\x64\1033\TSRES.DLL'
Setting SMSTSMP TS environment variable
Setting _SMSMediaGuid TS environment variable
Setting _SMSTSBootMediaPackageID TS environment variable
Setting _SMSTSBootMediaSourceVersion TS environment variable
Setting _SMSTSBrandingTitle TS environment variable
Setting _SMSTSCertSelection TS environment variable
Setting _SMSTSCertStoreName TS environment variable
Setting _SMSTSDiskLabel1 TS environment variable
Setting _SMSTSHTTPPort TS environment variable
Setting _SMSTSHTTPSPort TS environment variable
Setting _SMSTSIISSSLState TS environment variable
Setting _SMSTSMediaCreatedOnCAS TS environment variable
Setting _SMSTSMediaPFX TS environment variable
Setting _SMSTSMediaSetID TS environment variable
Setting _SMSTSMediaType TS environment variable
Setting _SMSTSPublicRootKey TS environment variable
Setting _SMSTSRootCACerts TS environment variable
Setting _SMSTSSiteCode TS environment variable
Setting _SMSTSSiteSigningCertificate TS environment variable
Setting _SMSTSStandAloneMedia TS environment variable
Setting _SMSTSSupportUnknownMachines TS environment variable
Setting _SMSTSTimezone TS environment variable
Setting _SMSTSUseFirstCert TS environment variable
Setting _SMSTSx64UnknownMachineGUID TS environment variable
Setting _SMSTSx86UnknownMachineGUID TS environment variable
Root CA Public Certs=
Missing root CA environment variable from variables file
Support Unknown Machines: 1
Custom hook from X:\\TSConfig.INI is
No hook is found to be executed before downloading policy
Authenticator from the environment is empty.
Need to create Authenticator Info using PFX
Initialized CStringStream object with string: 1F53C44B-1AE9-4CAF-8ADA-5ED28DC8FF9A;2014-07-16T18:15:39Z.
Set media certificate in transport
Set authenticator in transport
CLibSMSMessageWinHttpTransport::Send: URL: XXXXXXXXX.XXXXXX.com:80 GET /SMS_MP/.sms_aut?MPKEYINFORMATIONMEDIA
Request was successful.
Default CSP is Microsoft Enhanced RSA and AES Cryptographic Provider
Default CSP Type is 24
New settings:
site=XXX,XXX, MP=http://XXXX.XXXX.com, ports: http=80,https=443
certificates are received from MP.
Unknown machine GUIDs: 774b17a2-6eeb-44bc-9c94-ce9081f5fe4c 74f16942-dd75-437f-8c4b-2a5de4d0e5e5
MP specific X86 unknown machine GUID is received at run time
MP specific X64 unknown machine GUID is received at run time
Getting MP time information
Set authenticator in transport
Requesting client identity
Setting message signatures.
Setting the authenticator.
CLibSMSMessageWinHttpTransport::Send: URL: XXXX.XXXX.com:80 CCM_POST /ccm_system/request
Request was successful.
::DecompressBuffer(65536)
Decompression (zlib) succeeded: original size 406, uncompressed size 2460.
-120
Server time zone info: 300, , [0 11 0 1 2 0 0 0], 0, , [0 3 0 2 2 0 0 0], -60
Client Identity:
Netbios name:
Current time: 2014-07-16 18:15:39.787 TZ:Pacific Standard Time Bias:0480
Current time zone info: 480, Pacific Standard Time, [0 0 0 0 0 0 0 0], 0, , [0 0 0 0 0 0 0 0], 0
Adjusting the system time: -14400.551 seconds
Time zone info set to: 300, , [0 11 0 1 2 0 0 0], 0, , [0 3 0 2 2 0 0 0], -60
New time: 2014-07-16 14:15:39.235
Current time: 2014-07-16 14:15:39.231 TZ: Bias:0300
Downloading policy from http://XXXX.XXXX.com.
Initializing HTTP transport.
Setting URL = http://XXXX.XXXX.com.
Setting Ports = 80,443.
Setting CRL = false.
Setting Server Certificates.
Set authenticator in transport
Setting Media Certificate.
Preparing Client Identity Request.
Setting transport.
Setting SourceID = 1F53C44B-1AE9-4CAF-8ADA-5ED28DC8FF9A.
Setting site code = XXX.
Can not find DeploymentType in file TsmBootstrap.ini or the file doesn't exist. This is not running on Windows To Go.
Setting SMBIOS GUID = XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX.
Adding MAC Address XX:XX:XX:XX:XX:XX.
Executing Client Identity Request.
Requesting client identity
Setting message signatures.
Setting the authenticator.
CLibSMSMessageWinHttpTransport::Send: URL: XXXX.XXXX.com:80 CCM_POST /ccm_system/request
Request was successful.
::DecompressBuffer(65536)
Decompression (zlib) succeeded: original size 415, uncompressed size 2460.
-120
Server time zone info: 300, , [0 11 0 1 2 0 0 0], 0, , [0 3 0 2 2 0 0 0], -60
Client Identity:
Netbios name:
Client GUID = , Netbios name = , State = Known
Using unknown machine GUID: 74f16942-dd75-437f-8c4b-2a5de4d0e5e5
GetSystemEnclosureChassisInfo: IsFixed=TRUE, IsLaptop=TRUE
Hash computed from CSP: Microsoft Enhanced RSA and AES Cryptographic Provider, AlgID: 32772, HashSize: 20
Computed HardwareID=2:4AC96CD5003991BC201B7AC01FBC88E592C3E2BE
Hardware ID: 2:4AC96CD5003991BC201B7AC01FBC88E592C3E2BE
Preparing the Client DDR Message
Setting SourceID = 1F53C44B-1AE9-4CAF-8ADA-5ED28DC8FF9A.
Sending the Client DDR message.
Sending Report
<Report><ReportHeader><Identification><Machine><ClientInstalled>0</ClientInstalled><ClientType>1</ClientType><Unknown>1</Unknown><ClientID>GUID:26717327-194f-4cd6-90ba-309998c058f2</ClientID><ClientVersion>5.00.0000.0000</ClientVersion><NetBIOSName>Unknown</NetBIOSName><CodePage>437</CodePage><SystemDefaultLCID>1033</SystemDefaultLCID></Machine></Identification><ReportDetails><ReportContent>Inventory
Data</ReportContent><ReportType>Full</ReportType><Date>20140716141539.000000+000</Date><Version>1.0</Version><Format>1.1</Format></ReportDetails><InventoryAction ActionType="Predefined"><InventoryActionID>{00000000-0000-0000-0000-000000000003}</InventoryActionID><Description>Discovery</Description><InventoryAc
Setting message signatures.
Setting the authenticator.
CLibSMSMessageWinHttpTransport::Send: URL: XXXX.XXXX.com:80 CCM_POST /ccm_system/request
Request was successful.
Submitted new client identity: GUID:26717327-194f-4cd6-90ba-309998c058f2
Preparing Policy Assignment Request.
Setting transport.
Setting site code = XXX.
Setting client ID = 74f16942-dd75-437f-8c4b-2a5de4d0e5e5.
Setting site signing Certificate.
Setting SiteSigningCertificateContext
Executing Policy Assignment Request.
Sending RequestAssignments
Setting message signatures.
Setting the authenticator.
CLibSMSMessageWinHttpTransport::Send: URL: XXXX.XXXX.com:80 CCM_POST /ccm_system/request
Request was successful.
::DecompressBuffer(65536)
Decompression (zlib) succeeded: original size 274, uncompressed size 662.
Request client ID: 74f16942-dd75-437f-8c4b-2a5de4d0e5e5
Response client ID: 74f16942-dd75-437f-8c4b-2a5de4d0e5e5
Retrieving Policy Assignments:
Successfully read 0 policy assignments.
Retrieving collection variable policy.
Found 0 collection variables.
Retrieving machine variable policy.
Found 0 machine variables.
Setting collection variables in the task sequencing environment.
Setting machine variables in the task sequencing environment.
Exiting TSMediaWizardControl::GetPolicy.
WelcomePage::OnWizardNext()
Loading Media Variables from "C:\sms\data\variables.dat"
no password for vars file
No assigned task sequence.
Setting wizard error: There are no task sequences available for this computer.
Skipping Confirmation Page.
Skipping Task Sequence Selection Page.
Skipping Variables Selection Page.
Skipping Resolve Progress Page.
Activating Finish Page.
Loading bitmap
Executing command line: X:\windows\system32\cmd.exe /k
The command completed successfully.
Successfully launched command shell.

HT4623 Hi, I have an iPod touch 2G with an iOS of 4.2.1 and there are no updates available for my device, I want to download an older version of iBooks that is compatible with my device. Pls what can I do?

Hi, I have an iPod touch 2G with an iOS of 4.2.1 and there are no updates available for my device, I want to download an older version of iBooks that is compatible with my device. Pls what can I do?

- The 2G iPod can only go as high as iOS 4.2.1. It does not have the hardware to support a higher iOS version.
- Your only way is if you have the version that was compatible on your computer such as in the recycle bin/trash or in a computer file backup. In that case delete the current version that is in your iTunes App library and replace it with the older version. Then sync.
- You can only download the current version from the App store.

Is there a task switch event for iOS? Like Event.DEACTIVATE for Android

Similar Messages

Maybe you are looking for