Is there a thunderbolt-dvi cable for the ipadmini

I have an older 23" Cinema Display that works fine, connected with USB 2 to a Mac aluminum keyboard, would love to be able to connect my ipadmini to it, and use the aluminum keyboard for typing. Does such a thing exist?

No iPad has thunderbolt on it.

Similar Messages

What kind of DVI Cables does the Mini Take?

I want to get a DVI cable for my iLo 15in LCD but I'me confussed with the type get. I know that The Mini and my monitor are DVI male but at the mini's output after the grid of pin inlets theres a horizontal and vertical inlet that makes a plus sign look along with one inlet in each space. The DVI to VGA Adapter on the DVI ( female ) side has same plus sign pins but in the large grid of pins, there a gap in the middle. The mini doesn't have that gap on the output.
On the LCD's DVI input, it has that entire grid of pin inlets ( holes ) with no gap but next to the grid there is only one horizontal inlet. It does'nt have that plus sign look like the mini's output. Nor does it have those four inlets on each side of the cross. It's just has a horizontal inlet.
I'm not familiar with DVI so I'm confused. Some cables on the market hace that cross and the gap in the middle of the pins, some only have the horizontal pin and the grid of pins with no gap. ( Help )!!!!!!!!!

I'm not completely following you, mostly cause my math sklls bl0w.
But I think you're making a distinction, perhaps without knowing it, between a DVI and an ADC connnector.
Digital Video Input is the first connector you refer to, I believe.
Twenty four pins in a 3 x 8 config and the section for video color you refer to as the plus sign. This is technically 5 pin.
The other connector sounds like an Apple Disply Connector (or ADC). These are 30-pin in a 3 x 10 config plus the video color 5-pin.
You can get picture perfect clear on this here
http://developer.apple.com/documentation/Hardware/DeveloperNotes/Macintosh_CPUs-G5/PowerMacG5/3Input-Output/chapter_4_section_12.html#//app leref/doc/uid/TP40002012-CH207-TPXREF159
hope this helps you bro.

I am trying to connect my Apple TV to an older Panasonic projection TV using an HDMI to a DVI cable to the Digital IN. I cannot get any sound. Can you help?

I am trying to connect my Apple TV to an older Panasonic projection TV using an HDMI to a DVI cable to the Digital IN. I cannot get any sound. Can you help?

DVI interface does't allow audio. Is there optical IN from your Panasonic TV? By then you can connect your ATV to Panasonic using optical together. It will work.

What is the best charging cable for the iPad Air (that is not made by Apple)? I need a long cable (over 6ft or more). I also need the cable to be of high quality and the cord part of the cable to be made of strong material.

What is the best charging cable for the iPad Air (that is not made by Apple)? I need a long cable (over 6ft or more). I also need the cable to be of high quality and the cord part of the cable to be made of strong material. Apple does not make one this long. Is there a cable out there that is sturdy like this and is safe to use?

yes, but I'm trying to use my iPad to type notes (using pages) and I have the smart case which I use as a stand. I need a cable long enough to fit through the back of my desk and the charging brick for the iPad won't fit behind the desk. I have to put it on the floor and then the apple cables aren't long enough to reach.

I am having trouble with the initial connection. I have isolated the problem to the cable/ connection. My new hdmi cable has a resolution up to 1080p...does the resolution matter?is this the right hdmi cable for the apple tv?

I am having trouble with the initial connection of the apple tv. I have isolated the problem to the cable/connection. My new hdmi cable has a resolution up to 1080p...does the resolution matter?is this the right hdmi cable for the apple tv?

There are only two types of HDMI cables (standard and high speed - listen to all 1.2, 1.3 etc etc nonsense they will try to tell in the store) both types will work with the Apple TV.
The cable may be faulty though, have you got another to try, what exactly is happening.

Is there a protective travel case for the iPad2 that will cover the smart cover as well?

Is there a protective travel case for the iPad2 that will cover the smart cover as well?

There are a variety of well-made sleeves from SF Bags which will accommodate the Smart Cover. I'm partial to the neoprene bags and sleeves from Bult NY and I use this "hoodie" netbook sleeve (in black) for extra protection when I'm traveling or in the field because it has a rigid shell to protect the back and sides:
http://www.builtny.com/hoodie-netbook-case-7-10-inches-prod.html
For everyday, I slip my iPad, with the SmartCover on, into a small neoprene messenger bag, whose 6 pockets hold my iPad, a wireless keyboard (in a sleeve from SF Bags), Kindle, iPad, and cables /chargers:
http://www.builtny.com/neoprene-messenger-bag-11-13-inches-prod.html

Is there a USB charging cable for a Canon EOS 550D?

Is there a USB charging cable for a Canon EOS 550D?

You have to use the battery charger to recharge the battery. The USB port won't do it.
"A skill is developed through constant practice with a passion to improve, not bought."

Why is the cable for the shuffle so short

why is the cable for the shuffle so short<should there be 2 cables.I have to havemy ipod dangling from the side of my computer(i have an all in one)

Assuming you have a 4th gen shuffle, it should be fine hanging off the computer, since the shuffle is so light. You can think of that cable that comes with the 4th gen shuffle as being more of an "adapter."
If you want a long cable, you can buy the replacement part. It comes with both a short adapter (like the one you have) and a long cable.
http://store.apple.com/us/product/MC003ZM/A/apple-ipod-shuffle-usb-cable
I use a USB hub, which I can conveniently locate on my desk. I connect the shuffle (and my other iPod/iPhone) to the hub. If you want a hub, make sure you get one that is self-powered (it has it's own power supply).

Do the cables for the 700p work with the 700wx?

I used to have a treo 700p that I broke when I dropped it from a 2nd story balcony onto concrete. I still have the box and whatever cables came with it. Now, I'm able to buy a 700wx for a real low price, but the seller only has the phone and the charger for it, no other cables. Would the cables for my 700p, like the sync cable work with the 700wx? If they would, this would work out real nice!
Post relates to: Treo 700p (Sprint)

Yes it will work most of the cables for the Treo series will work as it is an interchangeable cable, there is some exceptions, but in your case it will work.

Dimensions of the 160-Pin Cable for the NI PXI-2530B

Hello,
My mechanical design team wants to know the measurements of the 160-Pin Cable for the NI PXI-2530B. It will be a while before we receive the cable we ordered. I could not find a data sheet with the measurement details; are they? Alternatively, is Figure 1 in the Installation Instructions drawn to scale?: http://www.ni.com/pdf/manuals/375656b.pdf
Thanks!
Solved!
Go to Solution.

JKSH wrote:
Hello,
My mechanical design team wants to know the measurements of the 160-Pin Cable for the NI PXI-2530B. It will be a while before we receive the cable we ordered. I could not find a data sheet with the measurement details; are they? Alternatively, is Figure 1 in the Installation Instructions drawn to scale?: http://www.ni.com/pdf/manuals/375656b.pdf
Thanks!
What dimensions are you looking for?
I'm a little surprised that the length of the cables is not included in the datasheets (I did just look!) - I thought that when I ordered cables for the older-style PXI-2530 modules in my lab that the length was specified in the part description.
If you need the dimensions of the connectors, you can do a little reverse-engineering and identify the dimensions of the various components. The connector to the module is an LFH-160. The Digikey P/N for the body of a connector is WM4099-ND. It may be difficult to find the dimensions of the backshells, however. The 4 terminal block connectors are standard 50-pin D-Subs. There are many examples out whose dimensions you can review.
Jeff
Jeffrey Zola

Running 10.6.8. Trying to open and view contents of a CD (of an MRI) and getting message 'This program cannot be run in DOS mode' Is there a way? Thanks for the help.

Running 10.6.8. Trying to open and view contents of a CD (of an MRI) and getting message 'This program cannot be run in DOS mode' Is there a way? Thanks for the help.

Go to the support site for the provider of the MRI software.
Sounds like it windows/PC. I have ran across that for the CDs that veterinarians provide for digital x-rays.
I would try on a PC or on yuur Mac with Windows via BootCamp or a virtual machine like VirtualBox

After updating to the latest version of Firefox on my Mac there is no progress bar for the page load. I really miss this feature and can't seem to find a way to obtain it.

The page load progress bar that was on the lower right of the window is no longer there. After updating to the latest version of Firefox on my Mac there is no progress bar for the page load. I really miss this feature and can't seem to find a way to obtain it. The tab has a circular progress wheel but this is useless for determining a stuck or slow loading page.
PLEASE NOTE: I am typing this in from a Windows based work computer but am asking about my Apple MacBook Pro that i use at home.

Firefox 4 saves the previous session automatically, so there is no longer need for the dialog asking if you want to save the current session. 
You can use "Firefox > History > Restore Previous Session" to get the previous session at any time. 
There is also a "Restore Previous Session" button on the default about:home Home page. 
Another possibility is to use:
* [http://kb.mozillazine.org/Menu_differences Firefox (Tools) > Options] > General > Startup: "When Firefox Starts": "Show my windows and tabs from last time"

Main optimizer error - There is already a transaction for the system

Hi Guru's,
I am trying to download support packs from maintenance optimizer in solution manager system. When i select the logical system it gives the error
'There is already a transaction for the system of this product version'
After this error, it does not proceed further.
There is many maintanence transactions in Maintanence optimizer. Now how to remove all these.
Any ideas or solutions most welcome.
Moses

As Christian has already written, the only problem is that there is already an open Maintenance Transaction for that specific system. Maintenance Optimizer checks that you do not open two different Maintenance Transactions for a system at the same time.
You only have to withdraw the old Maintenance Transaction to be able to proceed with the new one. Open the old Maintenance Transaction and click "Withdraw" on the bottom of the page. If it is grayed out, you need to go one step backwards, there you can withdraw it.
Best regards,
Joachim

There is already a transaction for the systems of this product version(MOPZ)

Hello All,
I am trying to configure maintenance optimizer in Solution Manager 7.0
on Windows 2003 server and SQL 2005 server.
I am configuring this for SAP CRM 2007 server.
Created the server, database and system in SMSY
Created Logical Component in TA code SMSY
SM59 connection for SAP-OSS is OK.
S-User is assigned to a User.
Created a solution using TA code solution_manager.
Defined the product version for the solution created in the TA code
solution_manager.
When creating a Maintenance Optimizer transaction, I select the
product version and its logical component in the Plan Maintenance
(Phase) and click on Continue to go to Select Files Phase, I get below
warning:
Information Procedure 8000000130 Saved
Warning: Status was reset by system
Warning: There is already a transaction for the systems of this
product version
I cannot get pass this phase.
I have deleted and recreated the solution, carried out the same
activity again but its giving the same Warning
Warning: Status was reset by system
Warning: There is already a transaction for the systems of this
product version
Any help will be appreciated???
Regards,
Satish.

Hello Ragu,
Thanks for your response.
As of now, we do not have ChaRM in place. Secondly, we use a single customer number.
I would like to let you know that in our landscape we have two CRM server, one ECC sever, one SOLMAN7.0 server.
I tried to configure MOPZ for CRM, ECC, SOLMAN server to download the respective STACKS.
I was successful in configuring CRM and SOLMAN.
But when I tried to configure in ECC, it failed due to RFC erros.
So I deleted the transaction for the ECC system and deleted the system itself in Solution Manager.
Reconfigured the Systems in "SMSY", RFC connections are correctly defined to configure MOPZ between SOLMAN7.0 and ECC6.0.
When I start configuring the MOPZ, I cannot get pass the first phase and this is when I get an error: There is already a transaction for the systems of this product version.
Please let me know if you need further information.
Regards,
Satish.

I have a hard time understanding why I can't contact support about YOUR problem. I plugged my iPhone into my pc. iTunes came up. It said there was an update available for the phone. I accepted that. Clicked on the "download only" because I didn't have the

I have a hard time understanding why I can't contact support about THEIR problem. I plugged my iPhone into my pc. iTunes came up. It said there was an update available for the phone. I accepted that. Clicked on the "download only" because I didn't have the time to install it at that point. It downloaded but didn't stop. It continued to the 'backing up your iPhone' segment then froze. I waited at least an hour with no change. Finally I unplugged my phone..iTunes wasn't responding.I rebooted my pc then tried the same thing again. Same outcome even though I let it "Back Up" for 7-8 hrs while I slept. Same Story............... iTunes 10.4.0.80 is the software I'm using. When my phone is 'plugged' in what I see on it's face is "Sync in Progress".....for hours!

Error 1611
This error typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, this error may be a hardware issue. If the errors persist on another computer, the device may need service.
Synced media like apps and music are not included in the iPod backup that iTunes makes. You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

Is there a thunderbolt-dvi cable for the ipadmini

Similar Messages

Maybe you are looking for