Is there a way to allow multiple file downloads..

with 1 click? Instead of clicking "download to" for each file.
I have a page that will query a db with the user supplied variable and return several (10 or more) files on a page which displays the return values as links that launches the download dialog box when clicked. Is there a way to have only 1 download dialog box that will allow the user to determine where to save the files to, and begin downloading all 10+ files in succession without user intervention? Or possibly a script that will run winzip on all of the files that the user checked and when the user selects download to, the script zips the files and begins downloading the .zip file.
TIA!!

Well... no and possibly. In general, I would say that this is not possible from one link, short of concatenating the files into one, but that would require the user to split them later. Obviously not what you want.
I think you could mimic this by creating a page with frames, where one frame is really small. And use JavaScript or META refresh tags in the larger area to set the source of the small frame to the file you want download. You do this after a few seconds delay to get each next file, so that it gives the user time to do a save as. Of course, this could end up being a headache for the user if they aren't fast enough or if your next file comes too fast. So I would recommend not bothering.

Similar Messages

  • Is there a way to select multiple files and initiate the Capitalize function?

    I have hundreds of files all in upper case that are driving me crazy. I can select them one at a time, right click and then select Transformations/Capitalize. Is there a way to select multiple files and initiate the Capitalize function?

    You could use Automator to do this - take a look at the article at http://www.wikihow.com/Batch-Rename-Files-in-Mac-OS-X-Using-Automator to see how this might be done.
    Good luck...

  • Is there a way to combine multiple files that were scanned individually into one?*

    Is there a way to combine multiple files that were scanned individually into one?*

    Assuming the scans are all PDFs, here is one easy way:
    Open the first PDF in Preview.
    Duplicate (File > Duplicate) if you want to preserve the original.
    Choose View > Contact Sheet.
    Drag and drop the other files from the Finder into the Contact Sheet window. You can select the files one at a time or multiple files at once.
    Arrange the contact sheet icons in the desired order.
    Save.

  • Is there a way to email multiple files from pages

    I want to send multiple files from pages, cover letter and resume, but when I select both files, the share icon goes dull and it can't be selected. Is there a work around for this?

    Are you aware that someone without Pages cannot open the files? And that Pages will only run on OS X? Your best bet is do save the files as PDFs, then just drag the icons into your open email.
    Walt

  • Is there a way to open multiple files at once with the new download manager?

    It was possible to do this with the old one by right-clicking and selecting "open", but I haven't been able to find a way to make it work with the new one.

    I looked at the download section of the Library dialog, which you can open using either:
    * Show All Downloads
    * Ctrl+j
    I couldn't figure out any way to open multiple items in one step. I can select multiple items, but... no way to launch them. Seems you need to double-click or press Enter to open a single selected item, and repeat for each item you want to open.

  • Is there a way to move multiple files?

    How can I move a folder from Finder on my Mac with multiple files into the Workspace backup?

    You can select multiple files in the Finder window when you Upload files into your Workspace.

  • Is there a way to rename multiple files in finder at the same time?

    for example, I have a group of pictures that I want to all start with the word "start" and be listed as "start1, start2, etc" Is this possible to do as a group versus having to individaully renaming every picture?

    There are some third-party renamers, or you can use an Automator Workflow.
    Start Automator and create a new Workflow.
    Drag in a Get Selected Finder Items Action.
    Drag in a Rename Finder Items Action. It will ask if you want to copy the items so that you don't alter the originals. Since you want to actually rename the originals, don't add that action.
    Set the parameters for the Rename. If you want to be able to reuse that workflow for different things, click the Options button and set it to show the action when the workflow runs. From your example, choose Make Sequential. Start with a new name and number it after the name.
    Save it so you can recall it when needed.
    Select your files and Run the workflow.
    You could also create it as a Service so that you can select files, then ctrl-click to select the workflow from the contextual menu. If you want that, set the Service to receive Files and Fodlers in the Finder.
    Skip step 1 (or delete it if you are converting it to a Service), but do the rest above. Save it with a short name so you can easily find it. It will appear in the Services submenu of the contextual menu.

  • Is there a way to create multiple BQY output to one of the Job File ?

    Hello,
    I am using EPM11.1.2.3.501 version.
    BQY report due to the large amount of data, it is difficult to use a WebClient.
    So will share on a quarterly basis.
    However,
    If modifications are to occur,There are difficulties must modify each file.
    For example,
    Register 2014 1Q, 2014 2Q, 2014 3Q, 2014 4Q BQY Job file.
    When you run the job, the output of the job file is created.
    If the job file is changed, you must modify all four files.
    This will be only grow ations.
    Is there a way to create multiple BQY output to one of the Job File ??
    Please help me.
    Thanks

    It is not possible to have multiple BQY outpu into a job file.
    Thanks,
    KK

  • __Is there a way to 'merge' multiple curves into a single curve?

    __Is there a way to 'merge' multiple curves into a single curve?
    By this I mean I have file with 2-12 curve layers - I wanted to 'merge' the curves so that I can end up with a single curve with the attributes of many. Maybe is there a script that would do this?

    I don't mean to be critical, but how do you get to a situation where you have 12 successive Curves layers?
    The advantage to a Curves layer is that you can adjust and re-adjust it to your heart's content.
    If you're habitually adding new Curves layers one over the other, maybe you should re-evaluate your process of working...  Perhaps the way you're thinking you should just work at a high bit depth and do repeated Curves operations on the pixels?  Or put some time into retraining yourself to not add a new Curves layer but to manipulate the one that's already there.  There are some nice new enhancements (e.g., the "finger" subtool that allows you to choose a spot in the image and manipulate that part of the curve).
    Again, I'm not trying to criticize you, just looking to see if maybe there's a way to avoid getting to the point where you need to combine Curves in the first place, since there's no direct "Merge Curves" capability, outside of just stamping a set of image and adjustment layers into pixels.  For completeness I suppose I should mention how to do that...  You can Stamp any combination of visible layers into a single layer of pixels (effectively combining all the Curves layers et. al.) by pressing Control - Shift - Alt - E.
    -Noel

  • Is there some way to add multiple addresses to an email I am sending that doesn't close the contact list after I click on an address?  This necessitates constantly going back to click the + sign to add each address separately.

    Is there some way to add multiple addresses to an email I am sending that doesn't close the contact list after I click on an address?  This necessitates constantly going back to click the + sign to add each address separately.  Is there some way I can open the contact list, click on all of the individual addresses to which I want to send the email without the list closing between each address entry, and have all of my address entries be listed to the email at one time?  Something like it works in Gmail.  I do not want to use set lists, I want to enter different addresses each time I send an email.  And I am a very slow typist, so I don't want to type the first few letters of each recipient's name.  It is much faster for me to just click on the e-mail addresses in the list as a group.  It doesn't make any sense to me to have to reopen the contact list for each address, when it should be so easy to click on all of the addresses I want at one time and then click once to add them all to the email as a group.  If there is a solution to this, please tell me.  Thanks.

    Vatlily,
    Try this:
    1. Select Mail>File>New Message.
    2. Select Mail>Window>Address Panel.
    3. Use (command+click) on the desired addressees in the Address Panel to create the list.
    4. Click "To:" on the top left of the Address Panel.
    The group that you selected will be added to the "To" field in your New Message.

  • Is there a way to open zip files on iphone5?

    Is there a way to open zip files on iphone5?

    I'll second robdrage on Readle's Documents. Also check out iZip. Dropbox will also open zip files. Any of the above will mange and allow yo to view image files.

  • Is there a way to format multiple images at once? Change colour mode or resolution?

    Is there a way to format multiple images at once? Change colour mode or resolution?

    It's very easy to make an action.
    Go to window > actions
    In the actions panel, simply click the 'create a new action' button, it starts recording as soon as you've created it (when you've given it a name).
    Now you can apply the changes you want to make to the images on the file you have opened.
    After you've done all you need to do. You click the 'stop' button. The action is now ready to use. And you can apply the changes you made on all the other files.
    Then you can continue how gener7 explained.
    I usually include a save and close command, so that the whole batch doesn't end up opened after running the script.
    But if you do that you have to create a new file, and save it to your computer before you start recording the action, otherwise the save command will be replaced by each file. And you'll end up with one edited file in the end. At least for as far as I know!

  • Is there any way to delete multiple spams at once, right now I go through each individually and delete it, but it's time consuming, thanks

    Is there any way to delete multiple spam messages at once. Right now I go through each individual spam and delete one at a time. This is very time consuming. Any tricks out there.
    Thank you

    Hi LRagsdale517,
    You should definitely be able to upload multiple files by Shift-clicking or Ctrl-clicking the files you want to upload. Just to make sure you don't have an old version of the service cached, please clear the browser cache and then log in to https://cloud.acrobat.com/files. After clicking the File Upload icon in the upper-right corner, you should be able so select multiple files for upload.
    Please let us know how it goes.
    Best,
    Sara

  • Is there a way to allow text wrapping on the outside (parent) group label IN SSRS Bar chart?

    Hi,
    I am using SSRS 2012.  I have a series of charts that have multiple category groups.  When I preview the chart, everything looks great unless the category group label is too long.  In that case it just gets cut off.  I've tried allowing
    "wrapped text", changed interval values,font size for Y AXIS but that seems to only affect the inside (child) category group.  Is there a way to allow text wrapping on the outside (parent) group label?
    I am expecting AREA VIII  BUT it shows AR on y axis.
    I need to fix it asap.

    Hi Sukhjeet.BI,
    Actually, I can reproduced the issue in my local Reporting Services environment. If there are multiple category groups on the chart, the child category can be wrapped, but the parent category would be truncated. Based on my research, this behavior looks
    like by design. Usually, the best practice is to limiting label length and number of items, use a smaller size label font or enlarge the chart size to get the chart to display properly.
    If you have any concerns about this in Reporting Service, I would suggest you submitting a wish at
    https://connect.microsoft.com/SQLServer/Feedback.
    Connect site is a connection point between you and Microsoft, and ultimately the larger community. Your feedback enables Microsoft to make software and services the best that they can be, and you can learn about and contribute to exciting projects.
    Thank you for your understanding.
    Regards,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • Quicktime pro, is there a way to export multiple movies as a batch?

    Quicktime pro, is there a way to export multiple movies as a batch? Every time I export more than one at a time they try to export at the simultaineously and their progression slows tremendously. Is there a way to automate the export process so they go 1 by 1? I am embedding watermarks in .mov files of different sizes so while thier export settings are identical there is some discrepency in the format/size of the movies and the placement and size of the watermark "track".

    Unfortunatley no.  You must export the forms one at a time.

Maybe you are looking for