Is there a way to creat column rules in newsletters?

I've tried using the callout lines, but it'd awkward. Is there a simple way to drop in a vertical or horizontal column rule between stories and columns in a newsletter?
Thank you.

I'll bite: how do you do that?
I gotta be honest... I have been trying out pages for about 2-hours now and I haven't created 1/2 a page yet. As far as creating a line, I go to insert>shape>line. I get a diagonal line which I can move perpendicular or horizontal but that's it... I can't move it say to the center of the page. I am no InDesign pro by any means (far, far from it: that is my wife's department). I picked up Pages so I coud create simple brochures/handouts quicker than stumbling through InDesign. But, I guess it's back to InDesign for now. But if someone can tell me how to move that #@*^%#$ line, it would be a strat!
Mike

Similar Messages

Is there a way to create a rule that sends and Auto Response for a shared mailbox?

I have a shared mailbox set up that receives emails that are sent to 3 different addresses:
[email protected]
[email protected]
[email protected]
I would like to create a rule that would send an auto response when someone emails one of these addresses. However, I don't want an auto response sent to [email protected] so I can't just set up an "out of office" reply for the mailbox.
Is there a way that I can create a rule to send an automated response to 2 of the 3 addresses?
Nate

Hi
we can enable the shared mailbox in ADUC and create Outlook rules for it in Outlook to achieve it. please follow these steps:
1. In Active Directory Users and Computers, right-click the shared mailbox and click Enable Account.
2. Configure the Outlook account for the shared mailbox in Outlook.
3. Click Rules > Manage Rules & Alerts.
4. Create a rule like the following format:
Apply this rule after the message arrives
Have server reply using a specific message
Except if the subject contains specific words
Select exception(s) (if necessary) of the Outlook Rule - (“except if from people or public group“)
5. Apply the auto reply rules for this shared mailbox.
Then users can receive auto reply of the shared mailbox except the exceptions we have set when they send messages to this shared mailbox.
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you

Is there a way to create a rule for Apple Mail that when a certain person is a recipient, make the email plain text?

My boss has a blackberry and when I send pdf attachments and copy him, he cannot see the attachments. I forget to make the email plain text before sending it to him. I can use Thunderbird as my client and it works fine but it is not linked to the other apps on my mac like Apple Mail. Can I make a rule or something for Mail so that when his email address is a recipient of the email, it will send as plain text to him?

I don't think so. Not without setting up an AppleScript and I am not proficient with those.
You can, however, set the follolwing in Mail > Preferences > Composing
Responding: Use the same message format as the original message.
But that would only be for responding to messages sent from his Blackberry.

Is there a way to create a collection based on the "previous import"?

is there a way to create a collection based on the "previous import"? that would make it easy to mobile sync the last import to my ipad, and do further picking/rejecting while away from my laptop.

well, yes, of course i could do it that way. i guess i wasn't specific enough. is there a way to create a smart collection, with the photos in the "previous import" as members of the smart collection. earlier i mentioned about using this smart collection to mobile sync with my ipad, to do further flagging.
so my intention, use a smart collection to mobile sync with my ipad, and the smart collection to include the photos from my previous import.
i guess another way to ask the question, is there a way to create a smart collection, by using some rule or condition in the smart collection, to automatically include previous import photos.
the documentation says that "previous import" is a collection, even though it shows up in the catalogue side bar section. but i see no way to choose that collection when making a smart collection.
jd

Is there a way to create a popup to a page in URL Redirect ?

I have a button (also with a report link column) that is doing a URL Redirect to another page in my app. This works fine.
However, some pages I branch to are small forms and a popup of that form would be more appropriate.
Is there any way to create a URL Redirect that redirects as a popup rather than a page navigation? Similarly, can you branch to a popup page with a report link column?
Thanks,
Reid
Edited by: reidster on Jul 30, 2009 7:10 PM

With your help, I was able to create a popup on a report link column using this:
I just added an "a href" around it.
Thanks again!
Edited by: reidster on Jul 30, 2009 10:18 PM
Edited by: reidster on Jul 30, 2009 10:18 PM

Is there a way to create a table of contents listing the order of tabs(sheets) in a Numbers document?

I am planning my wedding and I have this huge Numbers document with 20+ tabs and I have plans to add many more tabs. Is there a way to create a table that has two columns: column 1= order that a tab appears, column 2=tab name? For example, my first three tabs are called Venues, Must Haves, and To Do List (in this order. I'd want this table of contents to be in the first sheet of the document, so it would be like sheet 1. Then I 'd want like the cells of column 1 to be like 2, 3, 4 (2nd, 3rd, 4th sheet in the document), and then the cells of column 2 to say Venues, Must Haves, and To Do List. I can make a tiny table of one cell in each sheet that I copied the name of the sheet and then do like a cell reference for column 2, but I'm having trouble w column 1.

There is no referential value for the order of the sheets, just the sheet name. Only two things I can think of to suggest:
Do the same thing for the first column that you do with the second (i.e. put a referential column in the same table as the Name and point to that).
Seriously consider using a word processor program. Numbers is probably the wrong tool.

Is there a way to create subfolders in my POP inbox?

Is there a way to create subfolders in a POP Inbox in Mail? I am using Mail 2.1.1 (752.3).

David Gimeno Gost wrote:
The standard Inbox, Drafts, Sent, Trash and Junk mailboxes are all managed automatically by Mail. You cannot create your own mailboxes there.
But you can create local (On My Mac) folders and then create rules to send emails to those local folders upon receipt. You can get as creative as you like with local folders.

Is there any way to create a style sheet in APEX?

Hi experts,
I am in I am in Oracle Enterprise Manager 11g 11.2.0.1.0.
Is there any way to create a style sheet in APEX any version?
I want to create a style sheet and use APEX report column link to it.
Thanks.
Cow

Well, if that is the case, then you'll need to do some PL/SQL programming to write a package to create all of that for you, then execute the package when the 'link' column is clicked.
After your package is written, change the attributes on your link column to be a URL instead of page in your application and call it like:
javascript:{MypopUp2('http://your.server.name/print/owner.package_name.sub_procedure?key=#COL01#',800,600);}
On my system, I created a new DAD and user just for this one purpose, to read an select the information in my report, generate the HTML to display the data, etc. without leaving a loophole someone could exploit to get direct data manipulation access. My report though is a form-type report of all the data from about 40 tables for that one 'master' record, with css formatting included. I'm not directly generating a css file based upon data within the database, but simply adding the css formatting into the HTML file my package generates.
Does this help your problem?
Bill Ferguson

Is there a way to create a SD Customer from Employee information?

Hi!
Is there a way to create a SD Customer from Employee information?
We have implemented HR, I know that we can transfer the employee information to ECC using the transaction PFAL, also we know that the transaction PRAA is used to create vendors from employee information.
Is there a similar transaction to create a sold to party from employee information?
Thanks!

Hi Christian,
Please have a look at the F1 help for the origin field:
"If the field is empty when creating a sales document (standard setting)
the partner functions are determined from those partner functions given
in the sold-to party customer master (Table KNVP). If the system can not
determine all functions, it enters the number of the sold-to party (SP)
for the remaining partner functions of partner type customer (KU).
Maintain this field if you want a specific partner to be determined that
is not in the partner screen of the sold-to party master.
Use the following entries:
A - if a credit management partner function (e.g. CM) should be taken
   directly from the credit representative table (T024P). The credit
   representative must not then be created in the customer master.
-   For determining partners of partner type personnel
B - if functions should be taken from a customer hierarchy (Standard
   setting for customer hierarchy partners)
C - if you want to take the partner function exclusively from the
   partner screen entries in the customer master. If no partner is
   specified in the customer master for this function, it will not be
   used in the document. In this case you may have to extend the
   mandatory partner functions in the document manually.
    As this setting can lead to incomplete documents, the functions SP,
    BP, PY and SH, which are not absolutely necessary for sales and
    distribution processing, are not used.
-   Determining partners of partner type customer
D - if the personnel number of the system user should be used as the
   function, e.g. for sales executives. This function is only carried
   out online, not in the background. Therefore you should not carry out
   this setting for mandatory partner functions.
-   Determining partners of partner type Personnel
E - if the partner function should be replaced with a contact person
   from the contact person screen for the corresponding partner (table
   KNVK). If another contact person has been specified on the partner
   screen than the one on the contact person screen, this is not copied
   into the document.
-   For determining partners of partner type contact person
F - if it should be possible to determine the contact partners not only
   from the contact person screen but also from the partner screen of
   the partner with the current source partner function.
-   Determining partners of partner type contact person"
Also, please have a look in note 752091 where explain the partner rule.
Regards
Ruy Castro

Is there a way to create a year at a glance with detail and print?

Is there a way to create a year at a glance with detail and print?

To do what Dave indicated you need to do, it depends on what version of Acrobat you have:
Acrobat 8: Advanced > Enable Usage Rights in Adobe Reader
Acrobat 9: Advanced > Extend Features in Adobe Reader
Acrobat 10: File > Save As > Reader Extended PDF > Enable Additional Features
Acrobat 11: File > Save as Other > Reader Extended PDF > Enable More Tools (includes form fill-in & save)
I wonder what it will be next time?

Is there a way to create a PDF form that ANYONE can fill out and SAVE with their content?

Is there a way to create a PDF form that ANYONE can fill out and SAVE with their content? By anyone, I mean someone who can download and use the free Adobe Reader, on either a Mac or PC. I have Acrobat Pro, and would like to be able to create forms that can not only be filled out and printed, but saved and emailed, which is not an option with the forms I have created to date. They can be filled out, but not saved, with Adobe Reader.
TIA,
Nancy

To do what Dave indicated you need to do, it depends on what version of Acrobat you have:
Acrobat 8: Advanced > Enable Usage Rights in Adobe Reader
Acrobat 9: Advanced > Extend Features in Adobe Reader
Acrobat 10: File > Save As > Reader Extended PDF > Enable Additional Features
Acrobat 11: File > Save as Other > Reader Extended PDF > Enable More Tools (includes form fill-in & save)
I wonder what it will be next time?

Is there a way to create a local package repository

Is there a way to create a local package repository without technically being a mirror. For example, setting up multiple AL box's on my network and having them grab all the latest packages from one AL box?
Thanks,
Craig

What you most likely want is an ABS tree of your own, containing only the PKGBUILDs of those packages which you want to be included in your repository.
You should already have heard of the gensync program. In short, the parameters are the root of PKGBUILDs, sorted in subdirectories (ie. like the ABS tree), the intented name and location of the repository database file, and the directory containing the binary packages.
Let's assume you downloaded the current ABS tree to your hard drive, as well as all matching (same version as in the PKGBUILDs!) packages from a mirror, but you don't want the reiserfsprogs package in your repository. To achieve that, you must remove the /var/abs/base/reiserfsprogs directory, and may optionally remove the binary package, too. Since gensync analyzes the ABS tree you supplied as a parameter, removing the subdirectory of a specific package will cause this very package to not be included in the generated database. Assuming your packages lie in /home/arch/i686/current, your gensync call would look like this:
gensync /var/abs /home/arch/i686/current/current.db.tar.gz /home/arch/i686/current
If there are any discrepancies like
- PKGBUILD, but no matching binary package found
- PKGBUILD and binary package versions do not match
- permission problems (writing the db file must be possible)
gensync will gladly complain.
Otherwise you should find the db file in the place you specified. Keep in mind that the name of the db.tar.gz file must be equal to the repository tag in the pacman.conf to use the repo.
To make sure the db contains the right packages; use
tar -tzf current.db.tar.gz | less
to list the contents. Every package has it's own subdirectory including the metadata, which is rather obvious considering the file's generated from such a structure in the first place.
The binary packages along with a correctly generated db file are all you need. Make the repository directory containing these files available through FTP if local availability doesn't cut it for you, edit your pacman.conf if needed, and use it!
Adding packages works similar; All you need to have is the PKGBUILD in an ABS-like tree (it doesn't have to be the official tree; gensync doesn't care where the files come from. Just stick to one subdirectory per PKGBUILD, and you'll be fine), and the matching packages somewhere else, run gensync with the appropriate directories, and cackle with glee.
HTH.

Is there a way to create a playlist from the now playing screen on ios7?

Is there a way to create a playlist from the now playing screen on ios7? I want to be able to hear a song in my collection and immediately add it to an existing playlist or create a new playlist.
Thank you in advance

Hi Cornellius,
From the now playing screen there's a Create button at the bottom that allows you to create a
Genius Playlist
New Station form Artist
New Station from Song
IPhone Help, Browse and play
http://help.apple.com/iphone/7/#/iph3cf21a82
The Now Playing screen provides playback controls and shows you what’s playing.
For information on Genius Playlists, see
Archived - Genius for iPod and iPhone
http://support.apple.com/kb/HT2978
I don't see an option to add it to an existing playlist.
Best Regards,
Nubz

Is there a way to create user logins or some other way to ...

Is there a way to create user logins or some other grouping for a set of applications to use (memory) resources optimally -- for example only mail and Safari and Word in one grouping and another for Safari and an audio recording application, etc.?

It is possible to use Parenal Controls to limit which applications can be used be a particular user account.
But it's not really necessary as far as managing memory.
Matt

Is there a way to create three different physical calendars in ical so that I can get a fiscal view of the calendars?

Is there a way to create three physically different calendars in iCal so that I can view the calendar and events from a fical point of view?

iCal just shows the calendars you have created in your account(s). So if you are using iCloud just log into your iCloud account in a web browser and make as many new calendars as you wish to have. Then enable those in iCal.
If you use Google accounts or something else for the calendars, then create them as needed, and enable them in iCal.
I have several separate calendars all displayed in iCal - a couple linked through my Gmail accounts, and one through my iCloud account. Each uses a different default item color so they are distinct in iCal.

Is there a way to creat column rules in newsletters?

Similar Messages

Maybe you are looking for