Is there a way to dual-boot OS X and Ubuntu on a PC?

Recently, my MacBook Pro was stolen along with my book bag while I was at school. The laptop and bookbag have failed to show up and I don't have the money to replace the Mac with a less expensive used or refurbished Mac. So I'm thinking about getting a Lenovo laptop to replace my MacBook Pro. I was wondering is there any way to dual-boot OS X Snow Leopard and Ubuntu on a PC? The Lenovo laptop has Windows 7 installed by default but I will replace it with Linux to dual-boot OS X alongside Ubuntu.
I was wondering is it possible to run OS X on a non-Mac computer and how would I do this?
I love using Apple products but it stinks when something like this happens and then I have to rethink the situation and try to find a solution. I'm not abandoning Apple because I'd rather run OS X on a linux computer than Windows, but that's just me.

OSX is legal only on Apple hardware. In addition, several who have tried to to load OSX on PC-hardware find the result buggy, or cannot find hardware drivers for the "alien" devices.

Similar Messages

Changing Boot Order on Dual Boot Windows 8 and Ubuntu

Hi there,
Recently got a HP Pavilion g6 2213sa which came with Windows 8 (spit!) and this disgusting UEFI BIOS replacement (double spit!).
Anyway, I need to dual boot Ubuntu on my system, so I installed Ubuntu. Normally, on a non UEFI system, a "Grub" bootloader installed by Linux would take over the startup process, and allow you to choose between either Windows 8 or Ubuntu on startup.
However, on this computer, startup is just booting straight to Windows 8 despite the fact that Ubuntu and Grub IS installed.
Now, upon startup, if I press F9, then I get to change the boot-device on a one-time basis. I can either select "OS Boot Manager", which loads Windows 8, or "Ubuntu" which loads the Grub bootloader which allows me to select Windows 8 or Ubuntu.
However, when I press F10 to enter the Bios Setup with the intention of changing the boot order permanently, the Ubuntu option isn't there. Instead it has OS Manager, USB Disk, CD Rom, USB CD Rom and Network Card.
Thanks, HP for, the crappily designed BIOS.
Anyway, can anyone PLEASE provide me a way of changing the boot order so that GRUB is loaded first and NOT this crap Windows 8 rubbish (that I would happily bin if I didn't need it for work).

There is the same problem in HP 2000 laptops (in my case specifically, HP 2000-2D22DX). I did some investigation using trial and error, and this is what I found out:
There is some sort of a "recovery feature" or so that on every boot sets the very first UEFI load option to point to one of the two locations, in this order:
\EFI\Microsoft\Boot\bootmgfw.efi
\EFI\Boot\bootx64.efi
This option is displayed as "OS boot Manager" (for the first path) and something akin to "UEFI partition" for the second path, completely ignoring the actual name given to it (when you look at the EFI variables through efibootmgr, you can see that what is displayed as "OS boot Manager" actually is set to the name "Windows Boot Manager"; why anyone would do such renaming is beyond me). If you try to change the boot order so that this slot isn't the first, the UEFI will overwrite the BootOrder variable on next boot and reset it to point to "OS boot Manager" anyway.
By default, both of the paths above contain the same Microsoft bootloader (if you check the md5sum of both, you'll see they match).
So, until HP releases an updated UEFI that allows turning this "feature" off or rearranging boot options through the F10 UEFI setup, this is what you can do to get dual boot with the least amount of hackiness:
In Windows, mount the UEFI partition (mountvol S: /S mounts it as the S: drive) and copy the file \EFI\Microsoft\Boot\bootmgfw.efi to use some other name (for example, I copied it to "\EFI\Microsoft\Boot\bootmgfw.efi~", but you can change the name to anything else).
In the Windows command prompt, update the Windows UEFI entry to point to the new name: bcdedit /set {bootmgr} path \EFI\Microsoft\Boot\bootmgfw.efi~ (adapt to your set name accordingly).
Optionally, change the name of the Windows boot loader so that you would be certain that it points to the new file location: bcdedit /set {bootmgr} description "Fixed Windows path"
Install the other OS. In my case the bootloader was installed into \EFI\opensuse\grubx64.efi.
Delete the two files, \EFI\Microsoft\Boot\bootmgfw.efi and \EFI\Boot\bootx64.efi.
Use efibootmgr to delete the "OS boot Manager" entry: sudo efibootmgr -b 0000 -B
Set the new OS bootloader to be the default bootloader by using efibootmgr with the -o option. In my case, I had an entry called "opensuse" in slot Boot0001 and the updated path Windows entry in slot Boot0002, so I had to do sudo efibootmgr -o 0001,0002
Update GRUB to point the Windows entry to your renamed file (you'll have to create a new file in /etc/grub.d and rerun grub-mkconfig).
And that's it, now the UEFI will boot GRUB by default (it won't regenerate the "OS boot Manager" entry since it won't be able to find either of the two hardcoded paths and will "fall back" to properly reading the BootOrder variable), and the F9 menu will still allow choosing to boot Windows directly.

Could use help dual booting windows 8 and ubuntu 13.04

I have a Lenovo G580 with windows 8 + Ubuntu 13.04 installed. I've been trying to get Dual-boot to work for the past few hours with no success. I've been following this guide. After setting up the partitions similar to the ones in the guide i downloaded easyBCD on windows 8. I then added Ubuntu 13.04 to the grub menu. When i restart my laptop i get the menu with lenovo recovery, windows 8, and Ubuntu(not Ubuntu 13.04 like i labeled) when clicking Ubuntu it says windows failed to load, insert media for recovery. I can't do anything to access Ubuntu at this point. I don't know what it is i'm doing wrong but could use some help. Below are some pictures of the process. I'll post any needed info that i may have forgotten. When choosing OS it's in uefi mode.
partitions
OS's

I have a Lenovo G580 with windows 8 + Ubuntu 13.04 installed. I've been trying to get Dual-boot to work for the past few hours with no success. I've been following this guide. After setting up the partitions similar to the ones in the guide i downloaded easyBCD on windows 8. I then added Ubuntu 13.04 to the grub menu. When i restart my laptop i get the menu with lenovo recovery, windows 8, and Ubuntu(not Ubuntu 13.04 like i labeled) when clicking Ubuntu it says windows failed to load, insert media for recovery. I can't do anything to access Ubuntu at this point. I don't know what it is i'm doing wrong but could use some help. Below are some pictures of the process. I'll post any needed info that i may have forgotten. When choosing OS it's in uefi mode.
partitions
OS's

HP ENVY desktop 700-215xt dual boot Windows 7 and Ubuntu

My brother purchased a new HP ENVY 700-215xt with Windows 7 Home Premium from HP. I tried to set up a dual boot with Ubuntu. After the installation, the system still boots to Windows 7. I called HP support and was told if I do this it will void the warranty for this system. Is this true ? Any suggestions on getting dual boot to work ?

Why do I need to reload from recovery media ? The system boots to the original Windows 7 installatation with no problem. I will try this procedure after I find if dual booting voids the warranty. If the warranty is voided then I think I will suggest my brother return the system and go to another vendor that is more customer friendly.

Dual booting arch (usb) and ubuntu (grub2)

Greetings,
I'm trying to dual boot Arch linux (installed without a bootloader on a USB SSD) and Ubuntu 10.04 (installed on a hdd with GRUB2) but can't get Arch to boot. (Oh and I already have windows dualbooted)
The entry grub autogenerated:
menuentry "Arch Linux [/boot/vmlinuz26] (on /dev/sdb3)" {
insmod ext2
set root='(hd1,1)'
search --no-floppy --fs-uuid --set 95d9208a-44e4-48ba-abd2-a365d1ac25ff
linux /vmlinuz26 root=/dev/sda3 ro
initrd /kernel26.img
Why did it input root=/dev/sda3 as it says (on /dev/sdb3)?
The entry I figured would work:
menuentry "Arch Linux" {
set root=(hd1,0)
linux /boot/vmlinuz26 root=/dev/sdb3 ro
initrd /boot/kernel26.img
Output from fdisk -l:
Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0xbc4264d9
Device Boot Start End Blocks Id System
/dev/sda1 * 1 13 102400 7 HPFS/NTFS
Partition 1 does not end on cylinder boundary.
/dev/sda2 13 5286 42353664 7 HPFS/NTFS
Partition 2 does not end on cylinder boundary.
/dev/sda3 5286 19458 113831937 5 Extended
Partition 3 does not end on cylinder boundary.
/dev/sda5 18971 19458 3905536 82 Linux swap / Solaris
/dev/sda6 5286 6502 9764864 83 Linux
/dev/sda7 6502 18971 100155392 83 Linux
Partition table entries are not in disk order
WARNING: GPT (GUID Partition Table) detected on '/dev/sdb'! The util fdisk doesn't support GPT. Use GNU Parted.
Disk /dev/sdb: 8019 MB, 8019509248 bytes
255 heads, 63 sectors/track, 974 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
Device Boot Start End Blocks Id System
/dev/sdb1 * 1 13 104391 83 Linux
/dev/sdb2 14 111 787185 82 Linux swap / Solaris
/dev/sdb3 112 685 4610655 83 Linux
/dev/sdb4 686 974 2321392+ 83 Linux
/dev/sdb3 is the root partition
The content of /dev/sdb1
grub
kernel26-fallback.img
kernel26.img
lost+found
System.map26
vmlinuz26
- If I try to edit the root=/dev/sda3 to /dev/sdb3 it begins booting but doesnt find /dev/sdb3.
Thanks in advance for any help,
Oskar

Greetings,
I'm trying to dual boot Arch linux (installed without a bootloader on a USB SSD) and Ubuntu 10.04 (installed on a hdd with GRUB2) but can't get Arch to boot. (Oh and I already have windows dualbooted)
The entry grub autogenerated:
menuentry "Arch Linux [/boot/vmlinuz26] (on /dev/sdb3)" {
insmod ext2
set root='(hd1,1)'
search --no-floppy --fs-uuid --set 95d9208a-44e4-48ba-abd2-a365d1ac25ff
linux /vmlinuz26 root=/dev/sda3 ro
initrd /kernel26.img
Why did it input root=/dev/sda3 as it says (on /dev/sdb3)?
The entry I figured would work:
menuentry "Arch Linux" {
set root=(hd1,0)
linux /boot/vmlinuz26 root=/dev/sdb3 ro
initrd /boot/kernel26.img
Output from fdisk -l:
Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0xbc4264d9
Device Boot Start End Blocks Id System
/dev/sda1 * 1 13 102400 7 HPFS/NTFS
Partition 1 does not end on cylinder boundary.
/dev/sda2 13 5286 42353664 7 HPFS/NTFS
Partition 2 does not end on cylinder boundary.
/dev/sda3 5286 19458 113831937 5 Extended
Partition 3 does not end on cylinder boundary.
/dev/sda5 18971 19458 3905536 82 Linux swap / Solaris
/dev/sda6 5286 6502 9764864 83 Linux
/dev/sda7 6502 18971 100155392 83 Linux
Partition table entries are not in disk order
WARNING: GPT (GUID Partition Table) detected on '/dev/sdb'! The util fdisk doesn't support GPT. Use GNU Parted.
Disk /dev/sdb: 8019 MB, 8019509248 bytes
255 heads, 63 sectors/track, 974 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
Device Boot Start End Blocks Id System
/dev/sdb1 * 1 13 104391 83 Linux
/dev/sdb2 14 111 787185 82 Linux swap / Solaris
/dev/sdb3 112 685 4610655 83 Linux
/dev/sdb4 686 974 2321392+ 83 Linux
/dev/sdb3 is the root partition
The content of /dev/sdb1
grub
kernel26-fallback.img
kernel26.img
lost+found
System.map26
vmlinuz26
- If I try to edit the root=/dev/sda3 to /dev/sdb3 it begins booting but doesnt find /dev/sdb3.
Thanks in advance for any help,
Oskar

Anyway to dual boot either Linux and Mac OS X?

Is there a way to dual boot Ubuntu and Mac OS X similar to Boot Camp?

Here's where you start.
As an alternative you can purchase either Parallels Desktop for Mac or VM Fusion which provide virtual machines in which you can run various operating systems concurrently with OS X. Both products run various versions of Windows, Linux, and Unix.

How can I dual-boot Mac OSX and Linux Mint?

Hey guys, I was wondering if it is possible to dual-boot both OS's similar to OS X and Windows 7/8...but first I'm wondering if it will void my MacBook Air Warranty (w/ AppleCare) as ultimately it wouldn't be worth it then!
Thanks!
-Stu

Which CD are you trying to use?
Mac OS X 10.4 (Tiger) originally came on DVD.
A media exchange program initially was available:
http://images.apple.com/macosx/pdf/TigerMediaExchangeFormv5.pdf
So maybe you did an exchange for CDs?
You may find this article helpful:
http://weblog.techdad.net/2006/11/12/dual-boot-mac-osx-and-ubuntu/

I've had my iMac put away for about a year, now I can not remember the admin password upon startup. And I don't have the installation cd's (of course)! Is there any way to re-boot, re-do, get into my Mac to change it. I don't remember it even w/ the hint

I've had my iMac put away for about a year, now I can not remember the admin password upon startup. And I don't have the installation cd's (of course)! Is there any way to re-boot, re-do, get into my Mac to change it. I don't remember it even w/ the hint

Call Apple with the Serial and they will send you the ones that came with the Mac. Or search the Net.

I would like to know if there a way to use window (via bootcamp) and use a dual screen with the use of thunderbolt?

I would like to know if there a way to use window (via bootcamp) and use a dual screen with the use of thunderbolt?

There are very specific requirements for using an iMac as an external display.
From Target Display Mode: Frequently Asked Questions (FAQ) - Apple Support
What are the requirements for TDM?
A Mac notebook or desktop with a Mini DisplayPort or Thunderbolt connection
A Thunderbolt or Mini DisplayPort cable
A supported iMac with OS X 10.6.1 or later. The table below shows iMac computers that support TDM, the required cables, and the port of the computer to which you are connecting the iMac.
iMac Model
Cable Supported
Port on Source Computer
iMac (27-inch Late 2009)
Mini DisplayPort to Mini DisplayPort
Mini DisplayPort or Thunderbolt
iMac (27-inch Mid 2010)
Mini DisplayPort to Mini DisplayPort
Mini DisplayPort or Thunderbolt
iMac (Mid 2011)
Thunderbolt to Thunderbolt
Thunderbolt
iMac (Mid 2012 and later)
Thunderbolt to Thunderbolt
Thunderbolt
Note that the iMac (Retina 5K, 27-inch, Late 2014) does not support Target Display Mode.

Is there a way to download Boot Camp 2.1 drivers?

Is there a way to download Boot Camp 2.1 drivers?
Thanks.

You can get those drivers from here, but they may refuse to install if you haven't installed the Boot Camp 2.0 drivers from the Mac OS X 10.5 DVD.
(33438)

Is there a way to leave Windows 7 OS and install Windows 8 additionaly

Is there a way to leave Windows 7 OS and install Windows 8 additionaly with Bootcamp 5, means to have a triple boot option or dual boot option where the windows partition can choose to start windows 7 or windows 8 ?

Welcome to the Apple Support Communities
The problem you have is that Boot Camp doesn't allow you to create more than two volumes on the hard drive: one for OS X and another one for Windows, so you can't create another one for another Windows. If you want to test Windows 8, I recommend you to download a virtual machine application like VirtualBox, create a virtual machine and install Windows 8 there

Just loaded windows 7 on a macbook pro - how do you dual boot OS X and windows 7

Hi successfully loaded windows 7 and partitioned drive (I need windows for work Microsoft crm system)
All ok but a pain to have to keep logging off and on between OS X & Windows
I understand that there is a way to dual boot - I am running Snow Leopard on a macbook pro lap top OS x 10.6.7
Can anyone help please
Ian

You can install Parallels or Fusion, either will work. When you setup either Parallels or fusion you can tell it to use your already installed Boot Camp installation of Windows as its target guest operating system.
You would then just boot into OSx, start your VM (Parallels or Fusion), then you'll have access to both OSx and Windows without having to reboot.
I have this setup and two monitors. I have my Windows running on my external monitor and OSx running on my Macbook Pro monitor at the same time.
Beware that you will need to re-register Windows to get a second key. This is free and easily done either online or by calling the Microsoft registration number. The reason for needing a second key is that Windows, although only installed once in your Boot Camp partition sees the virtual hardware created by your virtual machine and thinks it has been reinstalled on a new computer.

Satellite S55t-B5233 Shrink disk for dual boot windows 8 and other OS

Hi,
I have a Toshiba Satellite S55t-B5233 Pre-installed with Windows 8.1
I would like to maintain Windows 8 but to dual boot with Windows 7, Ubuntu and OpenSuse, so:
- When I try to Shrink disk C (943371 MB) it says that 'Size of available shrink space in MB = 469651 MB'. The free space in my disk is 885240 MB!
So I would like to know if there is a way to left about 200000 MB for Windows 8? so I could use the rest of space for shrinking for other OS...
- I would instal windows 7, ubuntu and OpenSuse in partitions D, E and F [Partitions that I pretend to create by shrinking C] ... a) does it will void my warrantee? b) does it will render my Windows 8 “Recovery Partition” useless?
thanks in advance...
Gari

Satellite S55t-B5233
I don't recommend you attempt multiple-booting in this new UEFI/GPT world, Gari. Things are more difficult now than they were in the BIOS/MBR world. Best to set up virtual machines using Hyper-V or another free VM to run other OSes.
In answer to your questions,..
a. Toshiba doesn't care what you do with the software. They won't even look at the computer until the drive has been restored to its original out-of-the-box contents.
b. After you mess around with the partition locations, I doubt the recovery partition would be accessible in the normal fashion if at all. Many create a recovery drive and delete the recovery partition first thing.

Thinkpad x130e dual boot Win 7 and 8

So, I bought a new Seagate SSD Hybrid drive with the intention of dual booting Windows 7 and Windows 8. However, upon using my restore DVD's to reinstall Windows 7 on the new drive I hit a snag when trying to install Windows 8. The Win8 intall says that the drive needs to be GPT and it is currently MBR. So after removing the partitions and changing the drive to GPT I re-restore the Win7 OS. Then to my dismay I find that the drive has gone back to MBR during the restore proceedure.
Is there a way to edit the restore proceedure so that it doesn't change the drive over to an MBR drive?
Thanks,
Matt

the Arch partition should take some space from the windows7_os partition. You should keep the Lenovo_Recovery partition if you don't have a Windows installation DVD, or if you think you may want to reset your hard drive to its original state someday. In my laptop I have completely removed it.
I have a dual boot of Archlinux/Windows7, and I use the following partitioning
/dev/sda1 ntfs 60.0GiB /media/C (for windows os)
/dev/sda2 (extended partition)
/dev/sda3 swap 4.0GiB swap
/dev/sda4 ext4 30.0GiB root
/dev/sda5 ext4 30.0GiB home
/dev/sda6 ntfs 376GiB /media/D
I use the last partition as a shared partition between Arch and Windows, for storing music and videos... I use it also for installing games, so that I can play them either from windows or from Arch by using wine.
I'm not saying this is the best way to do it, but this has been working for me, also I don't use a separate /boot partition, I used to have it when I had multiple Linux distros, but with Arch alone I don't find it necessary.

Can't Dual Boot 8.1 and Server 2012

Hello folks; I hope someone has a solution to this issue. Right now, I'm stumped; and, I can't seem to find an answer on the net.
I have a crash-and-burn system, an HP Envy 700-400z, with an 256m SSD that came partitioned into Windows & Recovery at the factory; and, a 1T HDD drive. I want to load this machine with a couple of OSs; but I can't.
My first try was with Win2012; and, one of two things happens. If I try to install Win2012 to the HDD, the installation hangs; and, I have to back out the installation.
I then shrunk the partition on which Windows 8.1 sits; and created another partition for Win2012 to see what would happen. I mounted the new partition from an Empty folder in the now shrunk partition. I did get a message when I installed 2012
that the partitions are not in the correct order; but, I went ahead anyway with the installation just to see what would happen. This seems to work for awhile; and I can boot to either 8.1 or 2012; but at some point, I lose network access. I get
a message that the controller has an invalid IP configuration; and, nothing works but restoring the disk image to factory setting.
If it did work, it, obviously, won't work long term; because, I can't keep shrinking the one partition on the SSD to load SUSE Linux and other OSs that I want to use for my studies. I know I can use Hyper-V as a resolution for multiple OSs; but at
the moment, I want to understand what the deal is with GPT and the installation problems I'm having.
I suspected GPT has something to do with my problem; but am not sure. I read up on UEFI; but, both the SSD and the HDD are GPT drives. I've looked elsewhere on-line; but I come up with nothing that addresses the issue except for general discussions
on GPT. Ideally; I'd like to restore the original boot partition on the SSD to its factory setting, and carve up the 1T HDD for all the other OSs before I tackle doing the same thing with Hyper-V.
At this point, there's nothing on the machine but two OSs and SQL Server 2012; and I have the recovery disks if I happen to shoot myself in the foot; so, it doesn't matter what I do to the disk configuration. GPT is new territory for me; so, any help
with this problem is greatly appreciated.

Hi,
According to your description, my understanding is that you want to deploy dual Boot Windows 8.1 and Windows Server 2012 on VHD.
I recommend you to confirm that if your device meets the requirement:
Windows 8.1 system requirements
http://windows.microsoft.com/en-us/windows-8/system-requirements
System Requirements for Windows Server 2012 Essentials
https://technet.microsoft.com/en-us/library/jj200132.aspx
Then, reference the link below to install system:
Deploy Windows on a VHD (Native Boot)
https://technet.microsoft.com/en-us/library/hh824872.aspx?f=255&MSPPError=-2147217396
“Step-By-Step”- 4 Methods to Dual Boot Microsoft Windows 8 and Windows Server 2012 with or without Windows 7
http://blogs.technet.com/b/blainbar/archive/2012/09/25/step-by-step-4-ways-to-dual-boot-microsoft-windows-8-and-windows-server-2012-with-or-without-windows-7.aspx
Best Regards,
Eve Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Is there a way to dual-boot OS X and Ubuntu on a PC?

Similar Messages

Maybe you are looking for