Is there a way to exchange fields automatically?

Hi,
I have a load of reports which currently get their information via a sql query in the command file. The Fields in the report are then adressed under: command.fieldname.
Due to some changes in the organisation it is necessary to change the source from the command to a view. So far so good. I added the view in the Database Expert and now have both in the field explorer.
My actual way to update the reports is to look up one field after the other, delete it from the report and add the corresponding one from the view and then reformat the field. This is not quite as efficient as I want it to be.
So as the fields are named identically and in fact the only difference is that the new fields are adressed under viewname.fieldname in comparison to command.fieldname, is there a way to automatically change all fields in the report from command.fieldname to viewname.fieldname? Same question for all the formulas that refer to command.bla and have to be changed to viewname.bla.
Any help is appreciated as some of the records are really huge -> talking bout 500+ fields in a single report I have to change manually.
Regards
Stefan

Try changing the data source.   Database, set datasource location, select new, select your view, click on the datasoure at the top ( the command) click on the view in the bottom area click on update (near the middle on the right) CR should match them up for you....  It will let you know if it does not get an exact match, and may prompt you to choose a field.

Similar Messages

  • Is there a way to make Mailbox automatically update as soon as you get new mail?

    I just got an iPhone 4, and I noticed that my mailbox only updates when I open it, even if I received new mail since I last checked. Is there a way to make it automatically update when I get new mail in my inbox? There's sort of no point to alerting me when I get new mail if I'm already in the inbox.
    I dunno if it matters, but my mail box is synced to a gmail account.
    I also don't really know what my operating system is, but I guess it's iOS 6 since it's a new phone? I don't know how to check.

    It depends on how you have mail checking your mail. You mention that you have a Gmail account. Did you set this up as an Exchange account to use Push? If you have mail set to only check manually, then that is what will happen, it will only update manually. If you have it set to one of the other time settings, it will update like that, as that will be the only time it will connect to the mail server, even with the application open.

  • When I mark a mail in the junk folder as 'not junk', is there a way to have it automatically move to the inbox?

    Apple Mail keeps putting good messages into the Junk folder. I mark them as 'not junk', but then they just sit there. It is really tedious to have to move them back to the inbox, and change the colour back to black. Is there any way to do this automatically?
    I originally placed this question on the Snow Leopard group, but since then I have updated to Lion. I was hoping that Lion would have provided a solution, but it seems not. In the Snow Leopard group, somebody posted a script which apparently works in Snow Leopard, but I have no idea if it works in Lion, as there doesn't seem to be any way to load scripts.
    This is the script, anyway.
    It was given to me by <Bernard Hills> but I don't know who wrote it.

    OK, I've discovered how to access the library.
    It's here: http://techheavy.com/2011/07/access-the-user-library-folder-in-lion/
    But I don't really want to try that script in case it screws something up. I know zero about scripting.

  • When I mark a message as 'not junk', is there a way to have it automatically move to the inbox?

    Apple Mail keeps putting good messages into the Junk folder. I mark them as 'not junk', but then they just sit there. It is really tedious to have to move them back to the inbox, and change the colour back to black. Is there any way to do this automatically. (And while I'm at it, why is the Mail junk filter so poor? Shouldn't it be learning: it just keeps putting the same good messages into junk.

    Which version of Mail are u using and which Os ?
    On this side Mail 4.5 ans SL 10.6.8, I do have the possibility to transfer from the JunkBox to the in box for exemple and even change the color of the text... Sorry , in French.
    Edit, just saw that yre on 10.6.8 from your firt post...

  • Is there any way to prevent fields from being overwritten when importing data via xdp-file?

    In an pdf-form designed with LCD everytime the form gets merged with an xdp-datafile content of all fields get overwritten, regardless which data-binding (normal, global, none) is assigned to the fields and regardless if the fields are exluded in the xdp-datafile. Is this normal behavior and is there any way to prevent fields from being overwritten?

    The xdp-file is first exported from Acrobat Professional 8 (export data as *.xdp) to get the complete structure. Then in the xdp-file some fields are removed manually and other fields are filled with data. When the modified xdp-file is opened again with Acrobat Professional 8 it grabs the original pdf-form and merges the manually filled fields into the form. With the merge all other fields in the form are overwritten, even if they are not defined in the xdp-file. And that is what I want to avoid. I want to merge the xdp-file into the form and keep the data in fields not defined in the xdp-file.

  • Is there any way I can switch Automatic Backup off?

    Is there any way I can turn automatic backups off in Logic Pro 8? Apple has set it so you can't switch them off any more. (You could switch them off in Logic versions 6 and 7.)
    I see other people have had this problem and it has been discussed on these forums but nobody seems to have offered a crystal clear solution.
    I know somebody suggested you change the number below:
    <key>MaxBackupsToKeep</key>
    <integer>10</integer>"
    And someone else wrote:
    From the command prompt type:
    defaults write com.apple.logic.pro MaxBackupsToKeep 0
    But I can't see exactly how or where to do this. I opened com.apple.logic.pro.plist and found "MaxBackupsToKeep" used in a different context to what is described above. I changed a '1' after this text to '0' but that had no effect whatsoever.
    Can somebody please help? How exactly do you switch this annoying backup feature off?

    defaults write com.apple.logic.pro MaxBackupsToKeep 0
    But I can't see exactly how or where to do this.
    Open the Terminal application. Type the command above and press return.
    Note that setting it to 0 *does not* turn it off, it gives you one autobackup next to the song file, rather than creating an auto backup folder and putting the backups in there.

  • Is there a way to make it automatically set the ouputs of new tracks to Bus 5? (or something other than Stereo Out?)

    When I add a new track, it is automatically set to Stereo Out, is there a way to make it automatically set to Bus 5?  I use a mix that sends everything through busses and every time I add a track it seems I have to adjust this.
    Thanks

    ...and/or setup one or more tracks the way you want.. and then create/save a template and load that when you want to start a new project...
    You can even have Logic (via it's Startup preferences) autoload that template every time you start a new project... by choosing your template as the default one.
    See this page in the User Guide for more info

  • Is there a way to change the automatic optimization of the Thumbnail images in Webgallery?

    Is there a way to change the automatic optimization of the Thumbnail images in webgallery found in Photoshop (CS3 or Photoshop elements-- I have both)?  The thumbnails come out so blurry that it's embarrassing (for an art site). Thanks.

    Thanks for your response. Your websites look great!  You are to be complimented on your fine design work.
    I've been doing custom sized thumbnails, at around 300px, but they are still a little blurry, like when JPEGs are over optimized and some isolated areas look like they are churning, one shape melting into another like boiling water.  Then, I tried even larger thumbnails, and then shrunk them to a smaller size using HTML commands, hoping  that shrinking them smaller would help tighten up the blurry churning areas. They looked a little better, but the churning areas remained.  When I open up the individual thumbnails in Photoshop and I try using the unsharp mask or the sharpen function, it gets even worse.

  • I have a iMac desktop and a macbook pro laptop I work mainly on the desktop but when i go away for work I take my laptop. Is there any way to make it automatically back up to mirror my desktop? Like when I update a file it updates on there too etc?

    I have a iMac desktop and a macbook pro laptop I work mainly on the desktop but when i go away for work I take my laptop. Is there any way to make it automatically back up to mirror my desktop? Like when I update a file it updates on there too, if I install software it installs on there too etc?
    When I first got the laptop I syned it to load with all the same software etc but it hasn't continued to sync
    Thanks

    I use
    Chronosync (http://www.econtechnologies.com/pages/cs/chrono_overview.html)
    and
    Dropbox (https://www.dropbox.com/)
    Both work very well. The former I use for manual, one-way synchroniziation of (nearly) entire systems. The latter for automatic syncing of very active directories through local and shared online storage.

  • If my 14-day grace period has long passed, is there any way to exchange my Black/Graphite iPhone 6 for a White iPhone 6 of the same capacity?

    Is there a way to exchange an iPhone 6 for one of a different color? If so, what is the fee for that?

        djslank,
    We want you to be happy with all aspects of your phone. If you are beyond the 14 day exchange period, you do have the option to trade in your device and use the trade in value towards the purchase of the phone color you prefer. Click for trade in values www.trade-in.vzw.com. When looking at the purchase price of the phone you would prefer, since you will not have an upgrade available, you will want to view the full retail cost.
    SandyS_VZW
    Follow us on Twitter @VZWSupport

  • Elements 13 : 1. Is there a way to stop the automatic proposal for exemption? 2. Is there any way or an update for the manipulation of the color curves like in Gimp or Paintshop?

    Elements 13 : 1. Is there a way to stop the automatic proposal for exemption?
                           2. Is there any way or an update for the manipulation of the color
                               curves like in Gimp or Paintshop?
                                                        Dankeschön für jede Antwort die weiter hilft!!

    Hey Rich,
    It is true that you cannot add more than 250 plots to a 2d-axis graph in the REPORT.  One work around is to have the graphs stacked on top of each other and plot 250 to one graph and 250 more to another graph.  I am including a TDR (you have to unzip it) file that has 12 2d-axis stacked on top of each other.  Most of the properties have been made invisible through the graph properties.  You can still see the legends however.  One caveat to this is that you will have issues accessing the different graphs.  You have to do it from a VBScript.  The following line of code worked for me:
    Call GraphObjOpen("2DAxis" + Str(NewAxis))
    Where NewAxis is a variable that defines which graph I want to look at.  You would of course have to loop through the graphs as you add data. 
    Cheers,
    jigg
    CTA, CLA
    teststandhelp.com
    ~Will work for kudos and/or BBQ~
    Attachments:
    12PlotStack.zip ‏12 KB

  • Is there a way to shift fields down or remodify document in Word without losing form fields?

    I have a document that I created from Word and added in forms and fields in Acrobat. I now need to shift some fields down to make more space on the page and also adjust widths on some tables. Is there a way to do this easily in Acrobat? If not, is it possible to some how go back into Word (with some sort of link) and make these changes without losing all my fields/formulas/etc.?
    I am not using Forms Central because I have calculations in my form.
    Thank you in advance!

    I am having trouble finding (Document -> Replace Pages). I did find Layers in Navigation but I do not see any. Do I not have any layers in my PDF? I opened a Word Document in Adobe Acrobat Pro and proceeded to add my fields and formulas in the document. Shouldn't this automatically create a layer ontop of the content?  Sorry for all the questions, I am pretty new with Acrobat Pro.
    Thanks!

  • Is there a way to change field names globally in Form Wizard?

    Form Wizard often selects nearby text to create a name for a text box. Is there a way I can globally change the field name for a series of text boxes? For instance, I have a field name that Form Wizard created that says "Policy NumberPolicy that requires a specific" and I want it to be simply "Policy Number."
    If there is no way to fix it globally, is there a way to prevent it happening in the first place?
    Also, is there a way to automatically convert a text box to a check box?
    Thanks

    Unfortunately, the answer to all of your questions is no.  The closest you can come is to use a script to create a new field with a new name that has most of the same properties as the old field, and then delete the old field, but you'd have to find some way of deciding which fields shold be changed. You do not have any control over the form wizard apart from changing the PDF so it has a different design/layout. Converting a text field to a check box wold have to use the approach metioned earlier, but you'd have the same problem of determining which ones to change.

  • Is there any way to create fields reports users can enter data into?

    I am using Crystal XI to develop reports for my company and have not received any formal training on it.  I'm learning it fairly well through the help files. 
    One of the reports I need to create summarizes our scrap, rework, and additional incurred expenses for our monthly quality reports.  Most of the information is stored in the main program used by all employees, a very small amount of it is not.  I have created sub-reports for each of the different types of costs that are tracked in the system.
    Is there any way to create an area on the report that our QA people can use to enter the items not tracked in the main system?  I am imagining that it would be through another sub-report of some kind, but do not know how to create the fields needed. 
    Thank you very much for any assistance you can provide, even if it is to tell me "You can't do that, ma'am..."  At least then I would know and wouldn't beat my head against the desk trying to figure out how to do it.

    Is defining parameter prompts in the Crystal Report and displaying it in the report a possible workaround? 
    If you define parameter prompts, then Crystal will query the user before running the report - so this would be problematic if the user needs to reference data in the report to enter appropriate values (one possibility then is to use interactive parameters feature available in CR 2008).
    Sincerely,
    Ted Ueda

  • If machines have been accidentally deleted from a collection is there any way for SCCM to automatically recover them?

    Is there a setting to do so? Also, along these lines is there a way to set SCCM to automatically delete PC's in a collection if they have been inactive for a certain period of time?
    Thank you
    Bryan

    Whether or not machine records are in a collection doesn't matter.  When a machine record is deleted from the console it is essentially deleted from the database.  SCCM can't recover what was deleted the way you describe, but
    the machine records will come back after the machines execute their next heartbeat discovery.
    And yes, there are site maintenance tasks that run to remove inactive clients, but they are not enabled by default.
    -Matt

Maybe you are looking for