Is there a way to make Ical send notifications to Invitees on a certain day?
I am president of My 4-H Club and I need a way to keep 200 members informed about all of the upcomming events. At the beginning of the year, I add all of the events for the year in ical, and invite the group to each event. The problem is that ical sends out the reminder email inviting the members to the event the day that I Create the Event (Which sometimes is 6 months before the event). Is there a way to scedule the ical event reminder? If I create the event today, I do not want the members to receive the invite until one or two days before the event.
To make I-cal open automatically when you log in or start up:
Drag the application icon into the dock. Hold down the cursor on the icon and you will get a little menu. Choose Open at Login.
Similar Messages
-
On my iphone 5 when I text people they tell me the text says they received it from my iCloud email. Is there a way to make it send from a my number not my iCloud email. I don't want to delete my iCloud account though?
Settings App > Messages > Start New Conversations From [set to your phone number].
-
is there a way to make a number of cells add to a certain number. I need 5 or 6 cells to add to 1700. If one of the cells becomes 0, I need the other cells to change so the bottom number stays at 1700.
Okay then. If your seven numbers are in column B then the formula next to each number in column C would be
=IF(B=0,0,1700/COUNTIF(B,">0"))
This assumes all non-zero numbers are positive numbers. The sum will be 1700. -
Is There A Way To Make iCal Do This?
A way to make iCal automatically open when I wake from sleep mode or turn on my computer?
To make I-cal open automatically when you log in or start up:
Drag the application icon into the dock. Hold down the cursor on the icon and you will get a little menu. Choose Open at Login. -
I am using TweetDeck for Desktop and just switched to a computer running Mountain Lion (10.8.5). I have the Notification Center configured to show Banner alerts when tweets from designated accounts are posted. Prior to running Mountain Lion, TweetDeck itself would show me a banner in the top right-hand corner of my screen, and that banner would include the full tweet.
Now that I'm on Mountain Lion, it appears that the Notification Center has taken over the alert system. However, unlike the native TweetDeck banner, the Mountain Lion notification banner is limited to two lines, which means that, unless it's a very short tweet, I can't see the full tweet that has been posted. This is VERY inconvenient, as it means that I need to either open TweetDeck or open the Notification Center in order to see the full tweet.
Is there any way to adjust the Notification Center banner to allow it to show the full tweet, instead of just the first two lines?You have 2 options:
1. Create Video Playlists in iTunes (for example create one for Home movies, the other for Movies)
You COULD make these Smart Playlists. (see below for one technique)
NOTE: If you wish to do this don't miss the preference in Settings to enable Video Playlists at least (at least in the latest ATV updates) I believe it's under Audio setting. Amazingly the default is NOT to show!! (had me going for quite a bit)
2. Set up your Home Movies as "Music Videos" This has some gotchas: like you'll probably want to choose the skip when shuffiling, also Now they'll appear in music lists. The only advantage to this is that it makes playlists more available on iOS devices since there are no Playlists displayed in the Videos App.... (yeah Apple's made this WAY confusing of late)
If you wish to keep these clearly defined (especially for use with Smart Playlists.
Select the movie
Get Info (Edit Menu) (or Command-I Mac, Control-I, PC)
Choose the "Video" Tab - you can select your desired type from the Media Kind pop up.
Alternate method for setting up smart playlist of home movies would be to set the Genre to "Home Movie"
Probably more than you needed to know - leigh -
In contacts there is the possibility to add a new event, as the birthdays, but they do not appear in iCal. Is there any way to make that possible? It is normal to have a person with his birthday, anniversary and others key dates you want to link to such person, but the only one shows up is the birthday. How to be able to show all those dates linked to people in the agenda in the iCal?
ThanksHi,
I sugggest you try my application, Dates to iCal. It is shareware with a 2 week trial period.
Dates to iCal 2 is a replacement for Apple's birthday calendar for iCal. It has a range of features to allow the user to choose what, and what not, to sync to iCal from Address Book.
As well as automatically syncing birthday dates from Address Book, Dates to iCal 2 can sync anniversary and custom dates. It can set up to five alarms for each date in iCal and can also set different alarms for birthdays and anniversaries. It allows the option of only syncing from one Address Book group. This application also allows for the titles of the events sent to iCal to be modified to the user's preference.
Best wishes
John M
As I sell software on my site and ask for donations, the Apple Support Communities Use Agreement requires that I state that I may receive some form of compensation, financial or otherwise, from my recommendation or link. -
I have finally taken the step of updating my iPhone 4S to iOS8 after learning the hard way last update to wait for the bugs to be worked out. I was horrified to find that the battery was being sucked dry in no time at all. After finding a great article posted elsewhere on the apple forums, I went through and turned off all unnecessary options involving the use of cell data, location services and background refreshing. My battery life has thankfully returned to what it was before the update.
HOWEVER, now, every time I open an app for which I turned these things off, the window informing me of that pops up. I am getting really irritated by this as I made all of these decisions deliberately and am well aware that I may need to go back and change them in order to activate certain capabilities when I want to use them. I had done the same thing with the last iOS, but there were far fewer that needed to be turned off and the battery life seemed to be less affected by those that I left on so it was not the annoyance it has become now.
Is there any way to make the phone stop presenting me with these idiot messages? TIASorry no, there isn't a way to turn off those reminders.
You can send Apple a feedback here http://www.apple.com/feedback/ -
Is there a way to make the message+ app use wifi as default if wifi is available available?
I often am on WiFi with very little service and message+ tries to send it over service and if fails. I then have to turn on airplane mode and wifi to get it to send over the WiFi network. Is there a way to make this just happen automatically?
I can see that becoming pretty annoying, Garrett611. We do try extremely hard to make sure you get a reliable signal in as many places as possible. Since there are places where Wi-Fi is available but there's factors beyond our control that decrease cellular service, Wi-Fi is a great alternative! If you go into Verizon Messages > Menu > Settings > there is an option to Sync Over Wi-Fi only when connected to Wi-Fi.
JenniferH_VZW
Follow us on Twitter @VZWSupport
If my response answered your question please click the �Correct Answer� button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!! -
Is there a way to make the bluetooth source I pick for Siri persistent?
I have my iPhone paired with the factory Bluetooth hands-free audio in a car. I like using it for phone calls, but not for Siri.
When I start Siri, I can choose my audio source, but the iPhone forgets the selection after that session, and defaults back to trying to use the car's speaker and mic the next time I use Siri.
Is there a way to make this audio source selection persistent?
Thanks,
HeathHey,
I'm a Quadriplegic and I use my iPad with a mouthstick I made. Everything works great. Send me an email to bradcletter AT gmail.com and I'll help you out with everything! -
When I add a new track, it is automatically set to Stereo Out, is there a way to make it automatically set to Bus 5? I use a mix that sends everything through busses and every time I add a track it seems I have to adjust this.
Thanks...and/or setup one or more tracks the way you want.. and then create/save a template and load that when you want to start a new project...
You can even have Logic (via it's Startup preferences) autoload that template every time you start a new project... by choosing your template as the default one.
See this page in the User Guide for more info -
is there a way to make text bigger on text messages or is there a way to save messages on my computer so i can print them on my iPhone 3
Zoom will enlarge anything on the screen, simply double tap with three fingers.
To turn Zoom on/off go to Settings > General > Accessibility > Zoom.
Large text may also work for you.
Settings > General > Accessibility > Large text. Select the font size that works best for you.
Printing or accessing text messages via the computer is not support. Google it and you will find options.
You can also copy and past the content into an email to send to yourself. Then that email could be printed out. -
Is there any way to make a software like J.A.R.V.I.S?
Sir
A question arrived while watching Iron man, that is there any way to make a software like that. If yes please I want to kanow more about that and if no, I think you'll try your best.babowa wrote:
We are all users like you here, if you want a special feature, you can send feedback to Apple.
http://www.apple.com/feedback/
I don't think so. J.A.R.V.I.S. is a highly intelligent fururistic computer in the blockbuster science-fiction 'Iron Man' films. -
Is there a way to make default keyboard languages for specific contacts... Like for my mum whom I send messages in Spanish to and for my buddies who speak English.
I think you cannot set default value with something that is not on the list.
try to do it differently, leave the 3 option and set the default value to New.
then, edit the "newform.aspx" and hide the field, with jQuery
jQuery(document).ready(function($) {
$("select[title='fieldName']").closest("tr").hide();
then, edit the "editform.aspx" and remove the "New" option from the drop down with javascript
jQuery(document).ready(function($) {
$("select[title='fieldName'] option[value='New']").remove();
hmmm welcome to SharePoint :) -
Is there a way to make a smart "playlist" of specific books in my iTunes library, and copy ONLY THOSE books to an iOS device? I own an iPad and an iPhone but I want different books on each different device. When I've tried this, the iOS devices don't seem to respond.
There is no playlist for iBooks, butther eis nothing to preent you from choosing to download specific titles from itunes, or syncing just specific titles to an individual device.
-
Is there a way to make all page margins the same?
I've exported a book file from indesign. Since the pages were in a book-type spread, the odd and even pages have different margins. The odd page has the bigger margin on the left, while the even has the bigger margin on the right. Is there any way to make these identical after the fact. I can't go back and redo the indesign file.
Thanks, there are 382 pages. Can't do them one by one. And I purposely made the margins different in indesign, to give people more space in the middle. The margins are as follows:
But when I try to reverse the inside outside on one page of the spread, just reverse them, so the dimensions are the SAME, all the text and photos move.
Maybe you are looking for
-
How can I set Office Communicator to use my Outlook settings
dears i use the business exchange mail from vodafone egypt in work i can use outlook to see my mails and also office communicator but here in home i can only use OWA and outlook and i cannot set the Communicator to use my Outlook settings i also tr
-
In Flex2, How to get coordinates in a view port?
I know one can use something like fooUIControl.localToGlobal(new Point(x,y)) to get the coordinates corresponding to the origin at the top left of the main flex app 'document'. In case that the main flex app scrolls, how can I get the coordinates cor
-
"Unknown Object :unexpected AST node" prompt error when translating T-SQL
Hi,All We are using Oracle SQL Developer 2.1 to do a migration from Sybase ASE to Oracle. When we use Scratch Editor to translate one of Sybase T-SQL stored procedures,it failed. In the migration log ,we just get the following error: "Unknown Object
-
Lightroom 1:1 Previews not automatic...
I am just figuring out that Lightroom doesn't automatically generate 1:1 previews for all of your images when you first import them, nor at any point in the future, unless you specifically choose the Library>Preview>Render 1:1 Previews menu selection
-
My class says a class member VI is missing. The error list says find the missing VIs on disk. There are large number of VIs in this class so I have no idea which one is missing. How do I find out? All that are visible have a valid path. Thanks, jvh