Is There A Way To Use Tango On Iphone 3? And Suntanning With Iphone?

Hi I have an Iphone 4 new as of a month and alot of my friends have the regular IP3 and I was wondering if there was a way around so they can use Tango for video calling. Also I bring my phone in with me into a lying suntan bed for 20 minutes at a time. Can this harm my phone? Thanks.

Since the 3G and 3GS don't include a front facing camera, there isn't much point in using either one for a video call.
Don't know about the tanning bed doing any damage - much more irreversible damage is being done to your skin. You can always purchase another iPhone. Don't you have to open the tanning bed to access the iPhone? If so, might as well leave it out.

Similar Messages

Is there a way of using a mail merge function while on the iphone or ipad, i wish to email a "Word style, ot TXT" document to 250 of my contacts

Is there a way of using a mail merge function while on the iphone or ipad, i wish to email a "Word style, ot TXT" document to 250 of my contacts, I have tried downloading my contacts to my PC's outlook but only 1 contact comes across at a time despite the fact that Icloud says downloading namedperson + 249 other contacts to a CSV file

Hi everyone!
Looking also for an app that allows me to merge email and send them out to each recipient individually. Apparently that's not possible yet. Here's what the guys at RedbitsApps told me about Group Email capabilities:
"The current version of the app relies on the device operating system to send the emails. For this reason, sending individual email instead of a single email to multiple recipients is not possible. Apple doesn't allow apps to send single emails to many recipients easily. We may use a custom sending software in a future version."
Let's keep looking guys...

Is there any way to sync my lotus notes calendar and contacts with the calendar and contacts on my MacBook Pro?

Is there any way to sync my lotus notes calendar and contacts with the calendar and contacts on my MacBook Pro?

You would need to have enabled iCloud on your MBP. Your question indicated you did not.
Its serial number is useful for establishing ownership should the MBP be recovered. File a police report.

Is there a way I can take a cassette played and into my iPhone and plug it and record the contents of the casstte onto my device?

Is there a way I can take a cassette played and into my iPhone and plug it and record the contents of the casstte onto my device?

no

Is there a way to use the built-in Datalogging and programmatically log the front panel while the vi is running?

I would like to use the built-in Data Logging feature. There is the "Log at Completion" option, but is there a way to programmatically make a new log record while running? I looked around in VI server and couldn't find any methods that would do that. Currently, I am grabbing all of the front panel control references using VI Server and if there are any changes, the changed values are written to a log file along with a date/time stamp. I'm mostly dealing with buttons, which simply change from 0 to 1 or 1 to 0, so it's not too hard to visualize what was pressed. It works okay for reconstructing what happened, but it would be much nicer to use the built-in fe
ature because you can "replay" directly onto the front panel and actually see what the changes were. However, without being able to programmatically make a new log, it won't work for me.

Jake,
There are several options here.
I would suggest using your own code for datalogging. The datalogging you are referring to is primarily for debug, and one shot datalogs of front panel indicators (and controls?), not including graphs, etc.
If you go to the file functions, you will see a menu for datalogging. These functions will allow you to save your data, as you need it, simply, and in a compact format.
I recommend opening the datalog file, doing all your file operations, and closing the file before the program is complete. There are several examples of this in the examples database.
Good luck

Is there a way to use a single bitmapdata for multiple images with GPU mode?

With GPU mode is there a way to bring in a single 1024 X 1024 png containing all my sprites and then slice it up into multiple display objects all refering to the original BitmapData?
I have an app that runs in GPU mode - but I want to optimize the image management.
I am making three sets of images in the orders of 2048, 1024 and 512 px.
The app is a book app and each page has around 4 to 5 bitmaps. I would like to bring in one single image and slice it up - but just refer to the original bitMapData in the memory.
Is there a way to do this - e.g. using a masking technique?
I think it is possible using textures in direct mode - but that is not an ideal solution for me - as the app is already in the appstore - and I would have to entirely refactor it for stage3D. Also I use very large bitmaps which have some masking animations applied to them dynamically: http://youtu.be/Nm0T1jLCTz8?t=42s
Currently, I use jpgs and a jpeg mask file for each image which I composite to get the alpha - then I scale them.
PNGs may be better for GPU - (no compositing) but they make for a huge app file.
Now I am converting it to use diffent sized assets depending on the device, then scaling them if need, and then compositing them for apha. What I was hoping was to find a technique that could reduce the number of bitmapdata objects used and reduce the operations in general.
Any thoughts on optimizing would be appreciated. I can add my code here if it helps.

Tell Apple:
http://www.apple.com/feedback/iphone.html
We're all users here, just like you.

Is there a way to use one app spread across 2 displays with Mavericks?

I use Premiere Pro CC (among other apps) and have that app set up in 2 monitors. It doesn't seem like Mavericks is going to like that so much. Is there a way to change the display back to how it used to behave?

Yes this is the fix. I was getting frustrated over this issue. I use Dreamweaver across two minitors and the palette locations were resetting back to the main monitior where the app was. This unchecking and a quick log out and back in fixes the issue. Thank you!

Is there a way to use my branding when sending a file with Adobe Send?

Is there a way to include my logo in the message with Send files?

Hi dporterphotography,
The branding feature isn't available in Send just yet, but it is planned for a future release. In the meantime, you're welcome to send your file, with branding, using Adobe SendNow. You can log in to SendNow at https://sendnow.acrobat.com/signin.html using the same Adobe ID and password that you use for Send.
Best,
Sara

TS2972 "select share" of home share on itunes - is home share an all or nothing share? Is there a way to use parent controls to share some portions with children's iphones?

Is home share an all or nothing selection, or is there a way to "select share" with children's 5c iphones. Parent control feature to home share?
Thanks in advance!

I can't promise this works as I haven't tested this however on every iOS Device in the Settings app under General & Restrictions you have the ability to restrict a ton of options.
Here's my two cents which you could try:
On the iOS Device go to settings -> General -> Restrictions
Go to the Music section, the TV Shows section, & Movies Section and select the appropriate rating you want your kids to have access to.
After setting this up try accessing the home sharing and see if the content you want blocked still shows up on their devices.
If the content still shows up then:
On iTunes on your PC or Mac find the content you wish to block (Home Movies, Movies, TV Shows, Music, etc)
Right click on the items you want blocked and change the rating (for example to R or NC-17).
I haven't tried this myself however on paper at least I think it should work. If it does please report back and let everyone know and congrats on the new phones

Is there any way to use icloud to transfer contacts onto a new iphone if you have already gone past the setup assistance guides?

I bought a new iphone today and wanted to transfer contacts over from my old iphone.
The person from the shop skipped the setup assistance screens, so now theres no options to transfer things from icloud
I was wondering if there is any way to do this?
Thanks

There is a way!
Simply do Settings > General > Reset > Erase all content and settings (assuming this was a brand new iPhone).
That will start the whole setup process over.

Is there any way to get aperture to include caption and title with a photo when emailing directly from aperture?

I have been all over and it seems impossible to do... but it also seems impossible that I'm the only one who wants to put a title and description with a photo once, and then have that follow the photo when I email it, rather than having to re-type each little tidbit every single time I email an image. I use aperture for work and am always creating custom batches of images to send to prospective clients. it's crazy having to re-do the information every time.
Any suggestions for workarounds, plugins... something I'm missing?? iphoto used to do this automatically but it seems it doesn't anymore. even knowing the reason why they aren't allowing it might make me feel less insane
thanks!

Thanks both of you!
I think my iphoto settings must have defaulted back when I migrated to my new computer because sure enough, when I followed your instructions it went back to emailing the descriptions, which is great, and I hadn't ever tried opening the same library in iphoto. That's really convenient. It's too bad (and sort of strange I think) that Aperture doesn't have the same feature but as workarounds go this one is quite lovely.
The only remaining question is why, when I do open the library in iphoto, the description is intact but there is no title other than the version name?
For example, in aperture there is the version name, which is something like _DSC1733, the title I added in the "title" bar, which might be "diamond necklace" and then the description which is "18" long, 2carats total weight, platinum, 2013".
When I open the library in iphoto, the version name is at the top and under it is the decription, and the title is gone.
Unless there is another button I missed I think I have to go in and add the title into the description, and then just uncheck the version name when emailing so it doesn't show up.
Any advice? Hope I made the question clear-ish

Is there any way to sync my pc outlook contacts and calender with my mac

is there any way to sync my work pc outlook contacts and calender with my personal mac air

Sure. Install the latest version of iTunes on your PC, and just connect your iPod Touch to it, decline the prompt to autosync (the warning about losing your music), then go into the info tab, select sync contacts, and click apply. Your contacts will be transferred (both directions, i.e. the outlook contacts and your IPT contacts will be merged and the combined set will be present on both lists).
Hope this helps...

Is there a way to use an "Extended" network on an AT&T iPhone

hello all! I have an iPhone 5 on AT&T. In some spots I have spotty coverage, and I'm wondering if there's a way to "Rollback" to an Extended or Partner network like the Verizon iPhone does? Thanks!

I found the following on a Verizon web page entitled "Determining Verizon Wireless Service Coverage":
"When the roam indicator is flashing or the banner display reads Extended Network, home airtime rates still apply, but additional features and services may not be available.
"When the roam indicator is solid or the banner display reads Roaming, roam rates apply and digital features and services are not available."
The distinction seems to be mainly one of price, but also of services.
As far as I can tell, AT&T has only one sort of (domestic US) roaming, but Verizon has two different terms.
As far as I can tell, since AT&T doesn't charge for domestic voice roaming, there is no switch to enable or disable it. You can switch data roaming off and on.

I have a go pro is there a way to directly take videos from it and put on iphone?

i would like to know about having a go pro hook up to iphone so i can watch videos on it rather than carrying around laptop thanks.

You cannot

Is there a way to use two macs to run one app? I want to use my two macbook pros processors in a shared capacity.

I have two macbook pros a 2.4ghz and a 2.2ghz. Is there a way to use the other macbook pro to help with any cpu intensive apps like audio and video apps. I haven't had much luck on finding anything about sharing resources. It would be awesome if you could link up two macs and use both of them to power through processor intensive tasks.

Yep here you go.
http://www.youtube.com/watch?v=vLujLtgBJC0

Is There A Way To Use Tango On Iphone 3? And Suntanning With Iphone?

Similar Messages

Maybe you are looking for