Is there any changes in the DIAdem script between DIAdem 9.x and DIAdem 10.x ?

Hello,
I have got a question about DIAdem Script.
I saw the compatibility problem described in KB.
'Why do my DIAdem 9.1 Scripts not work in DIAdem 10?'
Many problems were solved, but some case were not.
So I guess there is some changes in the DIAdem script between DIAdem 9.x and DIAdem 10.x
Thanks for your help.

Hi supportko...
Yes, there were a lot of new features introduced in DIAdem 10.0, and 10.1. These are described in detail in each product's ReadMe file, and also in the Online Help under the "Index" tab at the node "DIAdem>>New Features>>New Commands and Variables"-- you will see 2 sections there: "Version 10.1", and "Version 10.0", showing you exactly what has changed. In most cases there is a compatability switch whenever a new feature creates a compatability issue for scripts developed in a previous DIAdem version. R&D works very hard to minimize the impact of new features on existing VBScript applications.
Brad Turpin
DIAdem Product Support Engineer
National Instruments
Message Edited by Support on 05-02-2007 03:56 PM

Similar Messages

HT6058 Is there any change in the MODERN FIRMWARE??

Is there any change in the MODERN FIRMWARE with the new ios update of 7.0.4?

The entire point of an update is to make changes in the current firmware.
So, yes there are changes. That is what an update is.

Are there significant changes in the UI framework between 5.2 and 2007 ?

Hi,
As the UI framework got introduced in 5.2 . Are there significant changes to the framework between 5.2 and 2007.
Therefore could a developer with experience in 5.2 carry out developments within the UI framework for 2007?
These developments need to be carried out to integrate a third party solution .
Regards
Manbir

Hi Manbir,
have worked with 5.1 and 5.2 before switching to 6.0.
I did not notice many changes in the framwork. Most of it still seems to be ICWC anyway.
- SAP has added some new BAdI's,
- there seems to be a lot of additional logic regarding webservices
- there are some new UI gimmicks (Move Assignmentblocks, Configuriation directly in the client, sortable tableviews, etc.)
- the designlayer (did not notice it before)
- component enhancements (I believe they were there in 5.2)
- editable overviewpages, i.e. extensive use of the view_group_context
So yes, when you have done 5.2 before, you will know your way aroung most things and be better off then 90% of the people starting with 6.0

Is there any change in the constant pool entires with JDK1.4?

Hi,
Here is my simple java class,
class Base
String manuf = "MRF";
class Derived extends Base
Derived() {
manuf = "ABC";
After compiling this class with JDK 1.3 and JDK1.4, i could see the difference in constant pool entries
so please let me know more about these cahnges.
P.S. : written a java program TClass.java to browse the constant pool entries.
i.e if compiled with JDK1.3 , constant pool entries looks as follows,
E:\bugs\jdk1.4\pramila>java TClass E:\bugs\jdk1.4\pramila\Derived.class
There are 21 + 1 entries in the Constant Pool:
Index Tag Reference(s)/Value(s)
1 10 5 15
2 8 16
3 9 5 17
4 7 18
5 7 19
6 1 <init>
7 1 ()V
8 1 Code
9 1 LineNumberTable
10 1 LocalVariableTable
11 1 this
12 1 LDerived;
13 1 SourceFile
14 1 Test.java
15 12 6 7
16 1 ABC
17 12 20 21
18 1 Derived
19 1 Base
20 1 manuf
21 1 Ljava/lang/String;
There are 1 methods:
Code array in method <init> of length 11 starting at byte 231.
If compiled with JDK1.4 constant pool entries looks as follows,
E:\bugs\jdk1.4\pramila>java TClass E:\bugs\jdk1.4\pramila\Derived.class
There are 21 + 1 entries in the Constant Pool:
Index Tag Reference(s)/Value(s)
1 10 5 15
2 8 16
3 9 4 17
4 7 18
5 7 19
6 1 <init>
7 1 ()V
8 1 Code
9 1 LineNumberTable
10 1 LocalVariableTable
11 1 this
12 1 LDerived;
13 1 SourceFile
14 1 Test.java
15 12 6 7
16 1 ABC
17 12 20 21
18 1 Derived
19 1 Base
20 1 manuf
21 1 Ljava/lang/String;
There are 1 methods:
Code array in method <init> of length 11 starting at byte 231.
There is a change in the index 3 can be noticed.
i.e
with JDK1.3 it is "3 9 5 17"
with JDK1.4 it is "3 9 4 17"
Thanks in advance.
Pramila

javac v1.4 emits by default Java 1.2 compatible .class files while all javac implementations since between 1.1.0 and 1.3.1 emit byte default Java 1.1 .class files.
Check to see what effect using the -target option in javac to get the two versions to produce Java 1.1, 1.2, or 1.3 .class files.
Chuck

Is there any difference in the prompts of UCCX 7 (Windows based) and UCCX 9 (Linux based) ?

Are the prompts for UCCX 7 (windows based) and UCCX 9 (Linux Based) are different ?
There are no default prompts available in the script editor folder of UCCX 9.
I have downloaded some prompts from the internet with .wav format, but those prompts are not working.
Can someone tell me if the prompts are different and if they are really different, where to get those prompts then ?
I have also attached the prompts i have downloaded from the internet.

Nope, there's no difference. UCCX uses either G711 or G729 encoded files. You have to encode them first before you upload them. UCCX will not encode them like CUCM does for MOH files. In fact, you can use CUCM's MOH file encoding to encode your files for use within UCCX.
Also, you will not see the system prompts on your workstation where you installed the script editor.
What is it that you are trying to do?
Anthony Holloway
Please use the star ratings to help drive great content to the top of searches.

Hi, i installed ios 5 for my iphone 4 and the camera function on lock screen was on the first few days , now it doesn't show the lock screen . is there any change i can do . Pls help me to solve the issue.

hi, i installed ios 5 for my iphone 4 and the camera function on lock screen was on the first few days , now it doesn't show the lock screen . is there any change i can do . Pls help me to solve the issue.

nishaadp wrote:
... it stucks with the apple logo , nothing works. Is anything i can do?
See Here for
Frozen or unresponsive iPhone

The installer found unexpected changes to the install script

Hi,
I've just try to install PC Client 15.7 "EBF 23439: 15.7 SP130" Just downloded from Service Market Place on a Win 03 R2 32 bit and on Windows 12 R2 64 bit
On Win 03 R3 32 bit it works fine but in Win 12 R2 there isen0t any way to run Sybase Central.
When I try to uninstall, on each machine, there are only thi message:
Unable to lunch installer
The installer found unexpected changes to the install script:

Hi,
So you are saying that PC-Client 15.7 SP130 doesn't uninstall? I will look into this.
If you go to your control panel and installed software.
What version(s) of Microsoft Studio do you have installed?
What versions of Microsoft Visual C++ #### Redistributable Packages do you have?
From what I saw they had pulled the Sybase Central out of PC-Client.
You might be able to get from ASE 15.5 version of PC-Client.
Please note that PC-Client with Sybase Central was never certified with Windows 8 or 2012. So you never get Sybase Central to work on those operating systems.
PC-Client 15.5 last drop should have been certified with Windows 7.
Thanks,
Dawn Kim

Is there any possibility running a Perl Script in JSP?

Is there any possibility running a Perl script in JSP and get the value of the JSP variable? The JSP page is running in TOMCAT 5.0 server.

i am created one script .... i want to replace it the older one ... it is possible in development server ..... is there any possibility to assingn the form in quality server ?????
is there any other way to assign the form to transaction with out using NACE?.
Well regarding you question about the system to have it assigned, ideally you need to assign it in development and mopve it up stacks. However, i aint sure of the roles you are assigned with for doing any config changes in QS. and the config needs to be done through NACE. Following is the process.
You need to first find the Output type and the standard form attached to the existing program/ tcode. This info can be fetcehd from TNAPR table. Once you have got the details, you can then get into NACE tcode to configure your new custom form instaed of the existing Standard one. Get the application type, output type from TNAPR table. Then select the particular outpput type in NACE nad click on processing routine. This is the place where the new form name needs to be updated.
Hope this helps!
Cheers!
Varna
Edited by: Varna17 on Sep 24, 2009 7:10 AM

When typing or clicking to open pages firefox does not show the text or that it has changed to the other page. Unless i minimize and then maximise the window. Any help with this would be much appreciated.

The browser seems to be lagging and stuck on the original page until moved around the screen or minimised or maximised.
Again any help at all is much appreciated. I really dont like using other browsers.
I have the latest edition of directx, graphics card and sound drivers are all up to date according to the laptop manufactor's website.
Reinstalled and uninstalled around 3 times. Thought it could be a registery problem so before i installed it the final time i ran c cleaner.
Ran adaware and superanti spyware to see if spyware was a problem
If any more information is needed please ask.
Thank you.
Nanakisbs

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
In Firefox 4 and later [http://kb.mozillazine.org/Safe_mode Safe mode] disables extensions and disables hardware acceleration.
Try to disable hardware acceleration.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
If disabling hardware acceleration works then check if there is an update available for your graphics display driver.

For one Urgent Change during performing the Approval(chnging the status to 'To be Tested') system does not recognize any changes using the CTS WBS BOM in the development system. The transaction is therefore incorrect or the status was reset by the system.

For one Urgent Change while performing the one of the Approval before changing the status to 'To Be Tested'
We are getting below error.
The system does not recognize any changes using the CTS WBS BOM in the development system. The transaction is therefore incorrect or the status was reset by the system.
COuld anyone please help us to know, How it can be resolved?
We also have this below error.
System Response
If the PPF action is a condition check, the condition is initially considered as not met, and leads to another warning, an error message, or status reset, depending on the configuration.
If the PPF action is the execution of a task in the task list, and the exception is critical, there is another error message in the document.
Procedure
The condition cannot be met until the cause is removed. Analyze all messages in the transaction application log.
Procedure for System Administration
Analyze any other messages in the task list application log, and the entries for the object /TMWFLOW/CMSCV
Additional Information:
System cancel RFC destination SM_UK4CLNT005_TRUSTED, Call TR_READ_COMM:
No authorization to log on as a trusted system (Tr usted RC=0).
/TMWFLOW/TU_GET_REQUEST_REMOTE:E:/TMWFLOW/TRACK_N:107
For above error Table /TMWFLOW/REP_DATA_FLOWwas refreshed as well but still the same error.

If you are in Test System, you can use function module AA_AFABER_DELETE to totally delete the depreciation area (tcode SE37, specify chart of depreciation and depreciation area), After that recreate your depreciation area and run AFBN. But before you do that, have you created a retirement transaction type that limits the posting on your new depreciation area? If not create one.
Hope this helps.
Thanks!
Jhero

Are there any information gathering tools or scripts for Sun VDI 3.1.1?

Hi,
Are there any information gathering tools or scripts for Sun VDI 3.1.1?
for problem reporting or service supportting , such as
ut_gather, a ksh based tool to collect all Sun Ray related information from a Sun Ray server.
http://www.sun.com/bigadmin/jsp/descFile.jsp?url=descAll/ut_gather_1_4_6
http://www.sun.com/service/gdd/index.xml
Sun Explorer Data Collector in The Sun Services Tools Bundle (STB)
http://www.sun.com/service/stb/index.jsp
http://www.unix-consultants.co.uk/examples/scripts/linux/linux-explorer/
http://www.slideshare.net/Aeroplane23/information-gathering-2
Windows MPSreports, msinfo32
Redhat sysreport
Suse Siga reportconfig
Any advice would be appreciated.
Thanks,

ut_gather versions are available on MOS under reference #1260464.1

I just bought a new Macbook Pro and loaded all my info from My old Macbook...now i can't remember for the life of me my Admin Password 9which i created 3 years ago)...is there ANY WAY to bypass this on my new Macbook Pro and begin again...?

i just bought a new Macbook Pro and loaded all my info from My old Macbook...now i can't remember for the life of me my Admin Password (which i created 3 years ago)...is there ANY WAY to bypass this on my new Macbook Pro and begin again...?

I assume that you don't have the installation discs, so:
1. Reboot
2. Hold command + s key down after you hear the chime.
3. When you get a text prompt enter in these terminal commands to create a brand new admin account (hitting return after each line):
(Type these commands very carefully)
mount -uw /
rm /var/db/.AppleSetupDone
shutdown -h now
4. You will go through the setup process again, create a new admin account, login to it and then change your existing account password or whatever else you need to do. You can delete the account you made in this process, or not.

Any changes in the condition value then system should trigger a mail.

Hello Experts,
I have below requirement
If user does any changes (increase the price /decrease the price) in the condition value then system should trigger a mail and goes for approval.
How i can achieve this ?
Thanks

Hi
In that case again you can use MV45AFZZ program and USEREXIT_PRICING_PREPARE_TKOMP. If this exit didnt work you can try in other save or prepare to save exits in this same program. For order statuses and authorization you can use status profile and control authorization through an authorization object. For email use email sending function and users will receive an email whenever some specific condition value is changed.
This will be ABAP coding in above mentioned program using implicit enhancement. There is no standard solution for this and you have to go for customization.
Thank$

Is there any solution to the colon translation bug?

Mac OS X has reserved characters that cannot be used in file or folder names. One of them is the colon: It is used by the operating system in paths to designated separate directories and files, exactly as Microsoft uses the backslash character for the same purposed.
However, Mac OS X is 'supposed' to translate colons to another character when saving files from within an application or the Mac OS X Save dialog. The typical translation is to forward slash or dash. For example, "Bug: Colon Translation" becomes "Bug- Colon Translation". Of if I am saving a web page to a PDF, the source name of an article with this title would change to "Bug/ Colon Translation".
The bug: The above colon translation process does NOT work reliably in the Mac OS X Save Dialog with reliability. I guestimate that 95% of the time the translation of colons in source titles does NOT work. Using the example of translating a web article title to a PDF saved file, the results are typically the following: "Untitled.pdf". This forces the user to copy then paste in the actual title of the article. THEN, 100% of the time, the colon translation actually works. For example, if I have a web article titled "Bug: Colon Translation", it is extremely rare for that title to be anything but BLOCKED, resulting in 'Untitled.PDF' as the resulting title in the dialog box. When I then copy and paste the source title into the title area, replacing 'Untitled', I get: "Bug- Colon Translation".
What will happen perhaps 5% of the time: The colon translation of the source title will actually work. When this occurs, using my example above, the OS provides the following translation: "Bug/ Colon Translation". Note that when it works in this situation I get a forward slash, not a dash.
I research, read and save web articles all day long. A lot of articles use colons. I have to contend with this bug all day long every day. This bug is many years old. I can't recall when it started. But it certainly has been consistent in Mac OS X 10.5 Leopard, 10.6 Snow Leopard and now 10.7 Lion. Three versions of Lion are enough for me to realize that Apple is either oblivious to this bug or they don't care.
Clearly, the colon translation CAN work. It is MEANT to work. No one can dispute that. The user is NOT supposed to be messed over with 'Untitled.PDF' files. They are MEANT to have actual PDF file titles, as seen in our example above.
Therefore the question:
Is there any solution to the colon translation bug?
It is incredibly annoying.

My guess is they don't care. Most likely they're illiterate and don't know what a colon is for. They probably think it's a little-used character. Remember: these are the people who don't know the difference between "deprecate" and "depreciate".
I have the same colon problem as you do. But it's not the biggest problem I have encountered in Lion. If it was only that I'd be Mr. Delighted with Lion. There's worse than having a colon - uh - that won't cooperate. A lot worse, in Lion.

Why should I recompile report for any changes in the database ?

Hi All
I call a report (.rep) from a form using RUN_REPORT_OBJECT, and everything is OK
For any change in the database, for example :
1- Export Dump file for the schema.
2- Drop the schema
3- Re-create the schema again
4-Import the taken dump to the schema
When i call the report again, the report doesn't run. If i recompile the report again it will work.
I read too much posts about this issue, most of them are taLking about the command line parameter RECURSIVE_LOAD=NO ,
v_url :=' COMPANY_NO='||:global.company_no|| ' RECURSIVE_LOAD=NO';
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_OTHER,v_url);
But , Still the problem not solved
Notes :
1- The report type is .REP
2- if I used the .JSP report, it is working fine , But i can't copy the source code for the report at the customer side.
Please Help

Well, first of all this would not be the correct forum. There is a dedicated reports forum for reports related questions. And secondly this most certainly depends on your report. If you have a query like
select * from my_tableor e.g. are using %rowtype records in your report then you most certainly will have to recompile it after you do an exp/imp.
cheers

Is there any changes in the DIAdem script between DIAdem 9.x and DIAdem 10.x ?

Similar Messages

Maybe you are looking for