Is there any command to find the running cloud services in the current PC in windows?
Is there way to find the list of running cloud service providers in the current PC through C++ programming ?
Or is there any other tool which gives the list of service providers running in the PC?
I know this question is not related to Azure but Azure comes under this part..
Please let me know the answer if any one is aware of it....
Hello DeekshaBharathi,
There are only 3 ways of communicating with the Azure cloud services:
a. Management Portal
http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-manage/
b. REST APIs
http://msdn.microsoft.com/en-us/library/azure/ee460799.aspx
c. Powershell
http://msdn.microsoft.com/en-us/library/azure/jj156055.aspx
Since that you want to use commands to manage Cloud Services. You can do it using PowerShell. You can refer to the article above for more information on this.
Thanks,
Syed Irfan Hussain.
Similar Messages
-
Is there any way to find the serial number of an ipod touch that is no hooked up to the computer? It was stolen and we need the number to give to the police.
If the product was registered, the serial number should be here, under My Products:
https://supportprofile.apple.com/MySupportProfile.do -
When I add a new bookmark, and the (star) Page Bookmarked window appears - is there any way to expand the size of that window so that I can see my entire list of folders when adding a new bookmark to an existing folder? The endless scrolling technique is far too tedious when trying to add a new bookmark, because the window is simply too tiny. Is there maybe a plug-in that will let me grab the corner of that window and re-size it? Thanks!
I suggest you install the "Add Bookmark to Here2" extension, then you can expand the the list but you will not see the bookmark itself in the list if that is what you wanted. At the top you have three major folders you can select one of them and scroll up and down. Below that you have your most recently used folders and you can select one of them instead and scroll up and down. You can see the folder the bookmark is in -- they get added to the bottom
If you really want to see the bookmark within the folder the same extension allows you to bring the bookmark to the folder from say the bookmarks sidebar that is why it is named as such. I use it but mainly i use the dialog.
Please continue reading about bookmarks and some related extensions at
* http://kb.mozillazine.org/Sorting_and_rearranging_bookmarks_-_Firefox
* https://addons.mozilla.org/firefox/addon/add-bookmark-here-2/
* http://dmcritchie.mvps.org/firefox/firefox.htm#addbookmarkhere2
* http://dmcritchie.mvps.org/firefox/kws.htm
If you are not using tags at all, you can remove a whole lot of confusion by removing them from the dialog via the extension. -
My kids misplaced her iPad, we can't find it for almost three months already. Check using 'find my iPhone' it show the iPad still OFF. Is there any way to find it last location before it was OFF ?
Simply stated that is design. If you want to suggest a change, there is a feedback section elsewhere on this site.
Barry -
Is there any ways to find the object that triggered the keyevent
i am having difficulty in this part of keyevent iam almost struck here i want to know is there an possibility to find the object that triggreed the keyevent
hi!
getSource() method returns the suorce object -
Is there any way to find the location within Bookmarks of a bookmark?
From time to time, it happens that I strongly suspect that I have saved a bookmark, but I can't remember exactly where, and I may have slightly changed a Bookmark category or sub-category description in the meantime.
I can usually remember something about the bookmark which enables me to find it within Show All Bookmarks, but it doesn't give me the opportunity to rename or refile the bookmark, its category, or its sub-category.
Show All Bookmarks looks like the field called "Location" (of a bookmark) should be called "URL", and there should be another field called "Location" which tells you where the bookmark resides within Show All Bookmarks.
Is it already possible to find the current location of a current bookmark within Show All Bookmarks?
If not, I request that it is made possible.
The text which appears below in "Troubleshooting Information" doesn't look very relevant to my question.Without using an extension you can click this bookmark to open the link in a new tab (you can also do this in offline mode) and click the highlighted star at the right end of the location bar to open the "Edit this bookmark" dialog.
See also these two extension that add a Parent column in the Bookmarks Manager (Library)
*Show Parent Folder: https://addons.mozilla.org/firefox/addon/show-parent-folder/
*Go Parent Folder: https://addons.mozilla.org/firefox/addon/go-parent-folder/ -
My brother got his iphone 4s stolen a week or two ago, he didnt have the iphone finder installed at the time. The phone company just gave him a new phone progammed with the same number is there any way of tracking his old phone? If this is relevant whenever i call him and hes on the phone the phone connects to someone else answering machine.
IF he set up find my ip[hone on the ihone itself BEFORE it was stolen ( there is no app, it is a setting) AND it is on AND it has jot been restored, then you may be able to track it using icloud/find my iphone.
Otherwise, there is no way to track it. -
Is there any command to check the status of CWAI?
I want to check if CWAI is currently on or off (start or reset or stop). Is there any convenient command to check?
Hello
You can check up on the CWAIReadSpec which has a read only property called AcquisitionState. Check out the following following KB about how to use this object.
Using the ComponentWorks AIReadSpec object in Visual C++
http://digital.ni.com/public.nsf/3efedde4322fef19862567740067f3cc/4a44123c8de6bc2d862565e6006d3d24?OpenDocument
And you can check out the function details in the Measurement Studio Help
I hope this helps
Bilal Durrani
NI
Bilal Durrani
NI -
Is t apple has some solution to find the stolen iphone
If you said you have Find My iPhone installed, you can access that from any internet connection. Just log in at http://www.icloud.com and go to the app.
Apple won't help you directly.
But do call your local authorities. -
Is there a command to know the current throughput fo an IPS
Hi guys
I need to get some information from my CISCO IPS. I need to get the current throughput from the IPS but I cannot find any command that could bring such information.
If somebody know how to get this information it will be great.
Regards!I had a script that would log in, run a "show stat analysis" twice, 60 seconds apart. Then it would pull the byte count from the interfaces, subtract the smaller number from the larder, device by 60 (seconds) and multiply by 8 (bytes to bits).
Results in b/s for each interface.
- Bob -
Is there any API to obtain the current Folder ID where the user is located??
how can obtain the current folder id where the user is?
tks in advanceFolder Id is one of the attributes you can pass to a custom item
type procedure. In the custom item type, go to the Procedures
tab. At the bottom of the page, under "Pass Attributes as
Parameters" select Folder Id from the list. Under "Pass As" you
have to provide the name of the parameter in your custom
procedure.
For example, here is a procedure that displays a list of
subfolders for a given folder:
<pre>
create or replace procedure SCOTT.DISPLAY_SUBFOLDERS AS
p_folderid IN VARCHAR2,
p_siteid IN VARCHAR2)
as
begin
for c in
(select '<a href="PORTAL30.wwv_main.main?p_cornerid=' || f.id
|| '&p_siteid=' || f.caid || ">'
|| f.display_name || '</a>' theURL
from portal30.wwsbr_all_folders f, portal30.wwv_user_corners c
where c.id = f.id
and c.parentid = p_folderid
and f.caid = p_siteid ) loop
htp.p(c.theURL || '<br>');
end loop;
exception
when others then
null;
end;
</pre>
This procedure takes both the folder id and the site id as
parameters.
Regards,
Jerry -
Is there any way to remove the 'Java web start window' message on windows?
This is unacceptable.
You can download an application in any language and install it.
If so many hoops have to be jumped through for security, and it changes the display to boot, this is simply not worth the (2 days!!) of effort is has taken to look into this and get it working right.nm, I figured out that a signed app will not have this problem.
-
Hello everyone,
I've lost my iPhone 5s yesterday in a party. The Find my iPhone app is not logged in with my iCloud account in the phone. Is there any way to find the phone? I'm really lost in this matter. Please help, if you can!
Thank you.Thanks for taking the time to respond!!
I didn't think so, but was hoping this was a time, that someone knew something that I didn't. -
Is there a way to find the number of downloads of music from itunes store?
Hi,
Is there any way to find the number of downloads of each music file available on itunes store. If not exact no of downloads but atleast a relative term to find the rank of the music track From any API
Thanks
SandeepA: Is there a way to read the number of active sequence executions from the Engine?
Scott,
Read other 5 answers
> One way of handling the issue of init once a set of instruments is to
> create a new sequence file that has a sequence to init and a sequence
> to close the instruments. Assuming that you always terminate a
> sequence and do not abort them, you could add a ProcessSetup and
> ProcessCleanup callback sequences to the client sequence file that
> using these instruments. These callbacks are automatically called by
> the process model in both the Single Pass and Test UUTs execution
> entry points. The callback sequences could call the init and close
> sequences for the hardware. In the hardware sequence file you could
> reference count the number of execution that init and close by setting
> the file globals in the sequence file to be shared across executions
> and then add a numeric value that keeps track of references for the
> instruments. The init sequence adds to the count, and the close
> sequence subtracts from the count. The init sequence inits the HW if
> the count is 0->1 and the close sequence closes the HW if the count is
> 1->0.
>
> This is one of many ways in TestStand that this could be done, not to
> mention that this could also be done in a similar way in a LabVIEW VI
> or DLL directly.
That sounds like it will work. I'll try adding a client count
increment/decrement in the DLL initialize and terminate functions. This
should essentially perform the same tasks as the callback scheme you mention
above, no?
The reason I didn't think the 'client counting' scheme would work initially
was I mistakenly thought that the termination function would not get called
under Terminate conditions. Since Terminate conditions happen a LOT during
our initial debug of new UUT types, I didn't think that would be acceptable.
I forgot that lacing the terminate funciton in a cleanup step group, I can
force it to be called in Terminate conditions.
> If you abort an execution then the reference counting idea above would
> fail to decrement properly. That might b... [Show more] -
InfoPath 2013: How to find the current file name?
Hello,
Is there any way to find the file name in the rule formulas when an existing xml file in a sharepoint form library is being edited in InfoPath? I am looking for a function that returns the current file name that is being edited.
Thank you,Hi,
According to your post, my understanding is that you want to get the current file name in the InfoPath form.
Here is a similar thread for you to take a look at:
http://social.technet.microsoft.com/Forums/en-US/a24f01d5-744c-4b75-b30d-3295311ab054/how-do-i-find-the-file-name-of-the-currently-open-infopath-form?forum=sharepointcustomizationlegacy
Best Regards
Dennis Guo
TechNet Community Support
Maybe you are looking for
-
I have tried going past the first set up stage, still with no wifi. I have then tried restoring the ipad mini, still no wifi available. Both my ipone and Apple Mac have wifi full bars. Please help. I only picked up my new ipad today. I am thinking it
-
Please help! I can't open this book, I have already paid for it. whenever I try to download it I get an error message about it being a protected file and I have to sign in with my Apple ID, I am already signed in to every possible adobe and apple app
-
Please help me with iTunes 7.4
I went on my computer to download iTunes 7.4. Usually when I open iTunes and there is a new update a window will pop open and it says "new version of iTunes available, would you like to download?" It didn't do it this time so I clicked on help and th
-
Question about suming two columns from different tables in Subquery?
Hello everyone, I have a subquery that works great for getting the total SUM of a Billing table, but I also need to add to that SUM the total surcharges or additional charges from a separate table. I tried this by doing something like so: (SELECT SU
-
Running OC4J as a Windows service
Hi Does anyone know if it is possible to run OC4J as a Windows service? Are there any tools I could use besides Microsofts SVRANY? Best regards Ole