Is there anything out there that will allow me to play my Xbox 360 or Playstation 3 on my Mac desktop?

I have researched and researched, but have found nothing. It's actually quite annoying that it's impossible to do this.

Unfortunately, no way to do this.
Sorry.

Similar Messages

  • Is there anything out there I can plug in to the USB socket that will allow me to adjust the volume?

    Is there anything out there I can plug in to the USB socket that will allow me to adjust the volume?
    I didn't like the iPod Touch user interface at first, but then I got used to it and now I'm back on the old scroll wheel and finding it a bit clunky to be honest. Whatsmore, I can no longer adjust the volume easily by putting my hand in my pocket and pressing the sides. Why did Apple not think to put one on them, sometimes the design over usability thing is taken too far.
    Some buttons for easily flicking tracks and pausing would have been handy too.

    http://www.apple.com/feedback/ - Apple products feedback links

  • Just for my own privacy i would like to set up a password or pin number on my messgae app is there anything out there that will help me do this please comment if there is a possible solution out there

    Just for my own privacy i would like to set up a password or pin number on my messgae app is there anything out there that will help me do this please comment if there is a possible solution out there. I know alot may say what you have to hide but ive got nothing to hide i just want one on there so my privacy is not broken by friends and family if they fancy playing on my phone and having a snoop round my phone.

    If you visit these forums often, you will read about the 2 year old child who accidentally wiped out the parents phone, the kid who set a passcode and didn't remember what it was, etc etc etc
    Passcode your device.   Protect your device.   It really isn't a toy.    The toy is the iPod touch.

  • Is there an adaptor or interface that will allow me to connect a thunderbolt device to my late 2011 Mac Pro Firewire 800 port?

    Is there an adaptor or interface that will allow me to connect a thunderbolt device to my late 2011 Mac Pro Firewire 800 port?

    lllaass is correct.
    To use ThunderBolt devices, a computer must have left the factory with a ThunderBolt port.
    There are no known work-arounds, and there are not likely to be any because Intel controls the chips and is not interested in anything less than the full [including Video features] implementation.

  • Is there a plug-in that will allow me to view CR2 (raw) files from a Cannon 5D Mark III to PSE 9 ?

    is there a plug-in that will allow me to view CR2 (raw) files from a Cannon 5D Mark III to PSE 9 ?

    The 5D.3 was first supported in ACR 6.7 which you need PSE 10 to use, so there is no plug-in for PSE9 that will allow opening the files from a camera newer than when PSE9 became obsolete.
    Besides getting PSE12, assuming it is supported on your current computer—check the specs, you can use the free DNG Converter available from http://www.adobe.com/downloads/updates.html 
    to convert your CR2 files to DNG files that are compatible with older versions of ACR.  Be sure to set your DNGC compatibility settings to a version old enough to be openable with PSE 10’s ACR.
    As far as whether the OP is serious, it doesn’t hurt to ask the question before spending money on something you didn’t need.

  • Is there a download that will allow me to play videos requiring Adobe Flash?

    Is there a download that will allow me to play videos on my iPad2 that require adobe flash?

    None of them get sterling reviews, go to http://www.appshopper.com, set it to iPad and search for Flash.

  • I have been taking photos for years and have thousands.  When I use Apple TV screen saver, it seems only to grab a handfull and repeats them.  Is there a configuration setting that will allow me to have the screen saver grab more than just a few?  Thanks.

    I have been taking photos for years and have thousands.  When I use Apple TV screen saver, it seems only to grab a handfull and repeats them.  Is there a configuration setting that will allow me to have the screen saver grab more than just a few?  Thanks.

    The device has an 8GB drive for caching streamed meida, a small portion of that is used to temporarily store photos for the screensaver. It may vary depending on resolution etc but it seems to be around 100.

  • Is there a software that will allow DVD video to put inserted into computer and uploaded into Mac iMovie?

    Is there a software that will allow DVD video to put inserted into computer and uploaded into iMovie on my MacBook Pro?

    Check out this user tip and see if it helps.
    https://discussions.apple.com/docs/DOC-3951

  • IS THERE A 875p bios that will ALLOW PERFORMANCE MODE enabled in 5:4 setup

    if i run my pc3200 (400mhz) ram at 333mhz in the bios, performance mode doesnt work. no matter if it is on SLOW,TURBO,FAST,ULTRA, i get the  same perfomance marks in programs. cpuz might say its enabled...but it really not. my sandra scores stay the same. when running 1:1 my performance modes work perfectly. any bios version out there that will allow this?

    Isn't performance mode (PAT, MAT, HyperPath or whatever) tied to the 1:1 synchronous clock operation?
    Are we 100% certain that CPU-Z and Sandra are able to detect PAT/MAT/HyperPath mode properly?

  • Is there an updated cable that will allow a generation 5 ipod to connect to a wv jetta 2012?, Is there an updated cable that will allow a generation 5 ipod to connect to a wv jetta 2012?

    Is there an updated cable that will connect a 5th generation ipod,touch to a vw jetta
    wagon?

    One of these adopters/cables should work:
    http://store.apple.com/us/product/MD824ZM/A/lightning-to-30-pin-adapter-02-m?fno de=45
    http://store.apple.com/us/product/MD823ZM/A/lightning-to-30-pin-adapter?fnode=45
    However, check with VW, some accessories like car systems  do not work with the adopter and/or iOS 7

  • Is there a remote adapter that will allow me pocket control

    I own a pair of Audio-Technica MTH-50 headphones that sound great with the iPhone.  The one problem is that the input is large, and needs to fit flush against the phone.  I like to have my phone in a case, so I can't really use the headphones unless I'm willing to leave my phone unprotected.
    One of the suggestions I've received about getting around this is a simple headphone adapter, which would plug in to the top of the phone, then allow me to plug my phones in above the case.
    This seems impractical, as I don't think the trade-off is worth it.  I wouldn't, however, mind it if I could add an extra feature.  So is there a headphone adaptor/extender out there includes a remote for basic volume / play / track functions?  If so, does anyone have experience with them to recommend a certain model?  Or are they crummy enough that it's not worth it?
    I appreciate your input.

    If there is, you'll need to find one that has 3 connectors (rings), for data transmission.

  • Is there an email account that will allow me to use a different from address with a POP account

    Need to be able to delete emails (I have an Optonline address) from iphone and ipad during the day, while retaining them on Mac Book Pro to view and file into folders in the evening. 
    Seemed like I could have my optonline emails forwarded to a Gmail account and just set up the Mac's mail to use my optonline account, while the iPad and iPhone used my Gmail account.  That worked, except for one issue - when I sent mail from the iPad or iPhone it would use my Gmail address and then people who used "reply" would have their replies sent back to my Gmail account.  I wanted to continue to use my optonline address since I have had this address for many, many years.  I saw that Gmail allows you to "send using a different from address", however because optonline is a POP account, they do not support the settings in Gmail and therefore I cannot get my optonline address to be verified by Gmail, meaning my emails continued to be sent from my Gmail address on my iPhone.
    I even tried setting up the Gmail account manually (using "Other" in the ipone settings) and putting in a comma with my optonline address in the address field, but still no success.
    Next, thought I'd try Yahoo mail - same thing - only sends mail with my Yahoo account.
    Then looked into iCloud since I use that for syncing Contacts and Calendars on all 3 devices - same thing - I can only send email using the @me.com address.
    Does anyone know of any other mail account that will work with my POP Optonline email address?  After 10+ years with this email address, having to announce to my world that I am changing my address (either to Gmail, Yahoo, or the iCloud's @me.com address) is something I really don't want to do.
    However, leaving just my optonline account on all 3 devices means I am constantly deleting the same emails on 3 devices everyday, which is also just not an effective use of my time.
    Please help!

    Here's one possibility:
    http://www.ideaflight.com
    The only way to keep students in the presentation, though, would be to lock the iPads to that app via the Guided Access mode:
    http://support.apple.com/kb/HT5509
    Whether you can do this remotely through one of the various mobile device management (MDM) soutions I don't know.
    Regards.

  • Any Cords That Will Allow Me To Play My iPhone In My Car?

    I was wondering if there was a cord that would go in my cigarette lighter and allow me to play my iPhone through the stereo?
    I had a cord for my iPod but it got stolen but the cord didn't work with my iPhone.
    Thanks,
    Sam

    May be it would help if you would tell us how you connect it to your stereo...
    Line in? FM?

  • Is there a VI availible that will allow one to interact with an analog signal

    Hello all,
     I am new to the sight and look forward to participating. I have a project that I’m working on and I would like to ask for your thoughts and direction if you’re willing. I have a few weeks left before completing an electronics program degree and Labview is one of the classes. The project I have chosen is to illustrate the differences between a micro controlled system and Labview controlled environment. I will be  acquiring a signal through a ultra sonic distance sensor. The analog signal will be produced after which  acquired  through a SCB – 68 connector block and converted using the pci-mio-16E. The sensor operates at 40 kHz emitting a 5v pulse (burst) then falling to gnd for a short period followed by a 5v rise and staying high for a period of time waiting for the return of the frequency. This time period represents 3 inches to 27 ft in distance.  I would like to interact with this signal through the distance period (portion) and output a string displaying a numeric value of the distance on the front panel obtained from an array built from different periods of the signal.  I am not clear on what Labview function offers this type of control.  I am hopeful in utilizing a vi or some type of trigger that allows me to build an array produced by some math functions.  Any help would be appreciated.
    Thank you, dhitch

    First thank you for your response, I will have an opportunity to make a capture tomorrow in class.  I believe I have run across the waveform measurement VI in my searches and am sure it’s a very good choice. The trigger VI you suggest, going by the name, should be my ticket. Would you imagine a delay or decreasing time after the capture, allowing the trigger VI time to respond to an output configuration be required?
    If I remember correctly the sampling rate capabilities are 500K samples/ second with 12 bits of resolution and as I say that it seems some of the capabilities rely on the processing speed of the computer. I guess I will kick the tires tomorrow hey.  There are 2 class periods remaining to finish our projects @ 2 hrs / class and my anxiety is a bit high. Wish me luck and thank you so much.
    dhitch

  • HT1349 I'm trying to assist someone who has a macbook with an operating system that is below 10.6.  Is there a software update that will allow an update to 10.6 or higher so that I can then install adobe flash 11.1?

    tI am trying to assist someone (by phone) with a macbook update to flashplayer 11.1.  The message at the end of attempted installation of flashplayer is that because the operating system is earlier than 10.6, the installation cannot be completed.  Is there a free software update available for her operating system?  Is there assistance at an Apple store available for her in area west of Chicago?  She is a senor citizen so will need some assistance in the event that it is a download or installation that I can't walk her through by phone. Thanks for any suggestions or assistance in this regard.

    The person needs to buy Mac OS Snow Leopard (10.6) for $29.00.
    Here is the purchase link:
    http://store.apple.com/us/product/MC573Z/A

Maybe you are looking for

  • How do i sync my itunes account with outlook exchange

    I have recently upgraded to a 5s from my 4s.  I have synced my mail accounts with my exchange and i can send/recieve emails no problem. However when in itunes my outlook account will not show (as it used to) so i am unable to sync callenders and cont

  • "Cannot play video - The Connected display is not supported" error message using Netflix 5.0.2 on my iPad

    I'm running iOS 7.0.3 on my iPhone 4S and iPad (3rd gen) and have just upgraded to the current version of the Neflix app available in the Canadian App Store (5.0.2). Although all other apps I've tried (e.g. Podcast, VLC) are able to properly output v

  • Skip first screen and return using BDC

    Hi, I am calling a Transaction from an ALV REPORT ,i wanted to set the material number in that transaction, i checked using f1 help and found the parameter id as 'MAT' . But when i am calling the transaction,the material number is not being displayed

  • Can my macbook 5.2 take ddr3 memory?

    Can my macbook 5.2 early 2009 take ddr3 memory? I have upgraded it to 4gb ddr2, but could I upgrade it further to ddr3 8gb? I have read somewhere you can but just to be sure.

  • Day-date placeholder syntax issues

    Hi, Can someone clarify the legal syntax of the day-date placeholder. The published syntax in the OSB Reference Guide does not appear to be correct. I'm trying to script the configuration of backup schedules using the obtool 'mksched' command for a l