Is there default create DB script?

I found that in XE 11g, ./product/xe/config/scripts/
there is a XE.sh
inside it will run
backupDB , clone DB etc etc.
There is no scrips to create a Default database.
SO after installing the XE 11g, should we need to create the DB manually??
Kit

SO after installing the XE 11g, should we need to create the DB manually??You shouldn't. XE database should get created at installation time. Don't you have one ?

Similar Messages

Is there a system table that stores the "create table" scripts

Does a Oracle system table exist that contains the "create table" scripts for tables defined under a schema?
I know I can build this with SQL by querying the user_tab_columns, but I was wondering whether the entire DML
statement is already stored in some other system table. In the Quest Toad software you can simply go to the "Schema Brower", "Tables",
then select the "Script" tab and it shows you the "create table" statement for the particular table that you are
looking at. I'm wondering whether Toad behind the scenes is building this "create table" script via the user_tab_columns
table or using another system table.
Thank you in advance,
Wes

you can use the DBMS_METADATA.GET_DDL procedure to obtain the details regarding the ddl statement used to create the table.

Create DB Script error

Hello,
i am trying to perform my first manual creation of a database. Initially was always receiving error;
ORA-01092: ORACLE instance terminated. Disconnection forced
I think this was because the UNDO element in the init.ora file did not match UNDO element in the Create DB script. But now that i think i have them matching i continously receive the error;
'Invalid Create Command'
The UNDO element in the init.ora file is;
undo_tablespace=UNDOTBS
The Create script is;
CREATE DATABASE Customers
USER SYS IDENTIFIED BY CUSTSYS
LOGFILE GROUP 1 ('F:\oracle\oradata\Customers\redo01.log') SIZE 100M REUSE,
     GROUP 2 ('F:\oracle\oradata\Customers\redo02.log') SIZE 100M REUSE,
     GROUP 3 ('F:\oracle\oradata\Customers\redo03.log') SIZE 100M REUSE
MAXLOGFILES 5
MAXLOGMEMBERS 5
MAXLOGHISTORY 1
MAXDATAFILES 100
MAXINSTANCES 1
ARCHIVELOG
CHARACTER SET WE8MSWIN1252
NATIONAL CHARACTER SET AL16UTF16
DATAFILE 'F:\oracle\oradata\Customers\system01.dbf' SIZE 200M REUSE
UNDO TABLESPACE UNDOCUST
DEFAULT TEMPORARY TABLESPACE tempcust_ts;
Also, when i have created the service for the database using ORADIM the alert log gives the following near the bottom;
ORA-00202: controlfile: 'F:\oracle\oradata\Customers\CUSTCONTROL01.CTL'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
Thanks in advance

I just about give up!!!
Thanks for everyone’s advice, but nothing so far seems to create the database. I could initially create a database with the Database Configuration Assistant no problem but have been asked to learn to create one manually as it supposedly gives better control of the parameters etc.
I am using Oracle 9i.
Next here is the undo elements in init file. (I don't think i can put whole init file up)
undo_management=AUTO
undo_retention=10800
undo_tablespace=UNDOTBS1
I manage to create the database service okay using ORADIM.
The alert log file is there at this point but with this error at the bottom.
ORA-00202: controlfile: 'F:\oracle\oradata\Customers\CUSTOMERSCONTROL01.CTL'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
Tue Aug 22 11:07:51 2006
ORA-205 signalled during: alter database mount exclusive...
Shutting down instance (abort)
I then attempt to create a password file using ORAPWD;
But i am given an error at command prompt;
OPW-00001: Unable to open password file
I then change ORACLE_SID to the new database.
I then log onto Oracle as sysdba. Says ‘connected to an idle instance’.
I call start up to init file. I am given following information;
ORACLE instance started.
Total System Global Area 135338868 bytes
Fixed Size 453492 bytes
Variable Size 109051904 bytes
Database Buffers 25165824 bytes
Redo Buffers 667648 bytes
I then call the SQL script containing the following;
CREATE DATABASE Customers
USER SYS IDENTIFIED BY CustSYS
USER SYSTEM IDENTIFIED BY CustSYSTEM
CONTROL FILE REUSE
LOGFILE GROUP 1 ('F:\oracle\oradata\Customers\redo01.log') SIZE 100M REUSE,
     GROUP 2 ('F:\oracle\oradata\Customers\redo02.log') SIZE 100M REUSE,
     GROUP 3 ('F:\oracle\oradata\Customers\redo03.log') SIZE 100M REUSE
MAXLOGFILES 5
MAXLOGMEMBERS 5
MAXLOGHISTORY 1
MAXDATAFILES 100
MAXINSTANCES 1
ARCHIVELOG
CHARACTER SET WE8MSWIN1252
NATIONAL CHARACTER SET AL16UTF16
EXTENT MANAGEMENT LOCAL
DATAFILE 'F:\oracle\oradata\Customers\system01.dbf' SIZE 200M REUSE
UNDO TABLESPACE UNDOTBS1 DATAFILE 'F:\oracle\oradata\Customers\UNDOTBS1.dbf'
DEFAULT TEMPORARY TABLESPACE temp_ts TEMPFILE 'F:\oracle\oradata\Customers\temp01.dbf';
Error says:
CONTROL FILE REUSE
ERROR at line 4:
ORA-02165: invalid option for CREATE DATABASE
Also in the alert log more information has been added with the last appending being;
starting up 1 shared server(s) ...
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
Oracle Data Guard is not available in this edition of Oracle.
I remove the line CONTROL FILE REUSE from script and run again, then receive this message;
CREATE DATABASE Customers
ERROR at line 1:
ORA-01092: ORACLE instance terminated. Disconnection forced
Also, now after all these attempts I tried making a new database again using DB Configuration Assistant and it now asks me to specify a template of type data_warehousing when I clicked on General_purpose. It states template file specified does not exist, supplying the following information;
{ORACLE_HOME}\assistants\dbca\templates\Data_Warehouse.dfj
Thanks to all for input on this but I am running out of time and have to move on to next part of project.

Ihave created a script, i need to email in pdf format.

Hi Experts,
There are 2 criterias...
1. criteria
I have created a script, i need to mail it. Please give me a step by step guide to perform it .. . Please give the comments in all the functional module to be used.
Do we have to write a separate program to send email or in the same program. i'll post my program along with this mail. I'm using this program to display report after delivery on that particular date.
REPORT ZREPORTTOEMAIL LINE-SIZE 400.
data : count, i type i.
TABLES : VBFA,         "Sales Document Flow
          VBAK,
          KNA1,
          VBKD,
          VBAP,
          LIPS,
          LIKP,
          KONP,
          KOMK,
          KOMP,
          zkna1,
          konv.
data : l_vbeln like vbfa-vbeln,
       l_posnr like vbfa-posnn,
       l_KNUMV like vbak-KNUMV,
       L_BILL_ITEM LIKE vbfa-posnn ,
       l_netwr like vbrp-netwr,
       l_MWSBP like vbrp-mwsbp.
DATA: BEGIN OF TKOMV OCCURS 50.
        INCLUDE STRUCTURE KOMV.
DATA: END OF TKOMV.
DATA: BEGIN OF TKOMVD OCCURS 50.
        INCLUDE STRUCTURE KOMVD.
DATA: END OF TKOMVD.
TYPE-POOLS: SLIS.
DATA: FIELDTAB TYPE SLIS_T_FIELDCAT_ALV,
      HEADING TYPE SLIS_T_LISTHEADER,
      LAYOUT   TYPE SLIS_LAYOUT_ALV,
      EVENTS   TYPE SLIS_T_EVENT,
      REPNAME LIKE SY-REPID,
      F2CODE   LIKE SY-UCOMM VALUE '&ETA',
      G_SAVE(1) TYPE C,
      G_EXIT(1) TYPE C,
      G_VARIANT LIKE DISVARIANT,
      GX_VARIANT LIKE DISVARIANT.
DATA: GT_LIST_TOP_OF_PAGE TYPE SLIS_T_LISTHEADER.
CONSTANTS: FORMNAME_TOP_OF_PAGE TYPE SLIS_FORMNAME VALUE 'TOP_OF_PAGE'.
DATA: BEGIN OF itab occurs 0,
        kunnr like likp-kunnr,      "ship to party
        NAME2   LIKE KNA1-NAME1,   "text
        ORT01   LIKE KNA1-ORT01,   "City
        BSTNK   LIKE VBAK-BSTNK,   "customer P O
        BSTDK   LIKE VBAK-BSTDK,   "date
        vbeln like likp-vbeln,      "delivery
        ernam like likp-ernam,      "person
        vstel like likp-vstel,      "shipping point
        vkorg like likp-vkorg,      "sales org
        lfdat like likp-lfdat,      "delivery date
        kunag like likp-kunag,      "sold to party
        NAME1   LIKE KNA1-NAME1,   "text
        bil_to like VBAK-KUNNR,
        name3 like kna1-name1,
        traid like likp-traid,      "transport/vehicle no
        BOLNR LIKE LIKP-BOLNR,
        wadat_ist like likp-wadat_ist, "good mov. date
        posnr like lips-posnr,      "item
        matnr like lips-matnr,      "material
        arktx like lips-arktx,      "item text
        matkl like lips-matkl,      "mat group
        werks like lips-werks,      "plant
        lgort like lips-lgort,      "stoage location
        lfimg like lips-lfimg,      "del qty
        MEINS LIKE LIPS-MEINS,
        vrkme like lips-vrkme,      "sales unit
        UMVKZ LIKE LIPS-UMVKZ,
        UMVKN LIKE LIPS-UMVKN,
        charg like lips-charg,      "batch
        vgbel like lips-vgbel,      "reference doc
        mtart like lips-mtart,      "mat type
        vkbur like lips-vkbur,      "sales office
        vkgrp like lips-vkgrp,      "sales group
        vtweg like lips-vtweg,      "Distribution Channel
        spart like lips-spart,      "division
        billno like vbak-vbeln,
        basic like komvd-kwert,
        budat like bkpf-budat,
        fin_amt like vbrp-NETWR,
END OF itab.
data : begin of jtab occurs 0,
kunnr like likp-kunnr,
name2 like kna1-name2,
vbeln like likp-vbeln,
zkunnr like zkna1-zkunnr,
zname like zkna1-zname,
end of jtab.
SELECTION-SCREEN SKIP 1 .
SELECTION-SCREEN BEGIN OF BLOCK BLOCK1 WITH FRAME TITLE TEXT-003.
SELECT-OPTIONS   : ABC FOR LIKP-WADAT_IST DEFAULT SY-DATUM
                              NO INTERVALS   .
SELECT-OPTIONS   : S_MATNR FOR LIPS-MATNR NO INTERVALS   .
SELECT-OPTIONS   : S_VKORG FOR LIKP-VKORG NO INTERVALS.
SELECT-OPTIONS   : S_VSTEL FOR LIKP-VSTEL NO INTERVALS.
SELECT-OPTIONS   : S_VKBUR FOR LIKP-VKBUR NO INTERVALS.
SELECT-OPTIONS   : S_VKGRP FOR LIPS-VKGRP.
SELECT-OPTIONS   : S_SPART FOR LIPS-SPART.
SELECT-OPTIONS   : S_VBELN3 FOR LIKP-VBELN.
SELECT-OPTIONS   : S_MATKL FOR LIPS-MATKL NO INTERVALS,
                   S_KUNAG FOR LIKP-KUNAG.
SELECTION-SCREEN END OF BLOCK BLOCK1.
select * from likp into corresponding fields of itab
              WHERE WADAT_IST IN ABC
              AND    VBELN IN S_VBELN3
              AND    VKORG IN S_VKORG
              and VSTEL in S_VSTEL
              AND VKBUR IN S_VKBUR
              and lfart like 'Z%'
              AND    VBTYP = 'J'
              AND KUNAG IN S_KUNAG.
select * from lips into corresponding fields of itab
                WHERE VBELN = ITAB-VBELN
                AND   MATNR IN S_MATNR
                AND   MATKL IN S_MATKL
                AND VKBUR IN S_VKBUR
                AND VKGRP IN S_VKGRP
                AND SPART IN S_SPART.
IF ITAB-VRKME = 'RM' AND ITAB-MEINS = 'KG'.
ITAB-LFIMG = ITAB-LFIMG * ( ITAB-UMVKZ / ITAB-UMVKN ).
ITAB-VRKME = 'KG'.
ENDIF.
SELECT SINGLE BSTNK BSTDK INTO (ITAB-BSTNK,ITAB-BSTDK) FROM VBAK
                 WHERE VBELN = ITAB-VGBEL.
SELECT SINGLE NAME1 ORT01 FROM KNA1 INTO (ITAB-NAME2,ITAB-ORT01)
                             WHERE KUNNR = ITAB-KUNNR.
SELECT SINGLE NAME1 FROM KNA1 INTO ITAB-NAME1
                             WHERE KUNNR = ITAB-KUNAG.
*select single vbeln POSNN into (itab-billno,L_BILL_ITEM) from vbfa where VBELV = itab-vbeln
*and POSNV = itab-posnr and VBTYP_N in ('M','U').
select vbeln POSNN from vbfa up to 1 rows into (itab-billno,L_BILL_ITEM)   where VBELV = itab-vbeln
and POSNV = itab-posnr and VBTYP_N in ('M','U') order by vbeln DESCENDING .
endselect.
select single * from vbfa where vbelv = itab-billno and posnv = l_bill_item and
vbtyp_n = 'N'.
if sy-subrc = 0.
clear : itab-billno, l_bill_item.
endif.
select single budat from bkpf into itab-budat where xblnr = itab-billno and
blart = 'RV'.
select single NETWR MWSBP into (l_netwr, l_MWSBP) from vbrp where vbeln = itab-billno
and posnr = l_bill_item.
itab-fin_amt = l_netwr + l_MWSBP.
clear : l_netwr, l_MWSBP.
select single kunnr from vbpa into itab-bil_to where
vbeln = itab-BILLNO and PARVW = 'RE'.
select single name1 into itab-name3 from kna1
where kunnr = itab-bil_to.
*select single VBELV POSNV from vbfa into (l_vbeln,l_posnr)
*where VBELN = itab-vbeln and
*POSNN = itab-posnr and VBTYP_N = 'J'.
*select single VBELN POSNN from vbfa into (l_vbeln,l_posnr)
*where VBELV = itab-vbeln and
*POSNV = itab-posnr and VBTYP_N = 'M'.
select VBELN POSNN from vbfa up to 1 rows into (l_vbeln,l_posnr)
where VBELV = itab-vbeln and
POSNV = itab-posnr and VBTYP_N = 'M' order by vbeln DESCENDING.
endselect.
select single * from vbfa where vbelv = l_vbeln and posnv = l_posnr and
vbtyp_n = 'N'.
if sy-subrc = 0.
clear : l_vbeln, l_posnr.
endif.
if sy-subrc = 0.
*select single KNUMv into l_KNUMv from vbak where vbeln = l_vbeln
select single KNUMv into l_KNUMv from vbRk where vbeln = l_vbeln
select * from konv where knumv = l_knumv and kposn = l_posnr and
kschl in ('ZR00','ZR01','ZR02','ZOBC').
itab-basic = itab-basic + KONV-KBETR.
ENDSELECT.
else.
*select single KNUMv into l_KNUMv from ekko where ebeln = itab-vgbel.
*select single KBETR from konv into itab-basic where knumv = l_knumv
*and kposn = itab-posnr and kschl = 'P101'.
select single KNUMv into l_KNUMv from VBRK where VBELN = itab-BILLNO.
select * from konv where knumv = l_knumv and kposn = l_BILL_ITEM AND
kschl in ('ZR00','ZR01','ZR02','ZOBC').
itab-basic = itab-basic + KONV-KBETR.
ENDSELECT.
*zkna1-zkunnr = itab-kunnr.
*insert zkna1.
endif.
     clear : l_vbeln, L_BILL_ITEM, L_POSNR.
APPEND ITAB.
clear : itab-basic, itab-lfimg.
     ENDSELECT.
          clear : itab.
ENDSELECT.
<b>perform zscript.</b>
*&      Form zscript
      text
--> p1        text
<-- p2        text
FORM zscript .
CALL FUNCTION 'OPEN_FORM'
EXPORTING
APPLICATION                       = 'TX'
ARCHIVE_INDEX                     =
ARCHIVE_PARAMS                    =
DEVICE                            = 'PRINTER'
DIALOG                            = 'X'
   FORM                              = 'ZREPORT2EMAIL'
   LANGUAGE                          = SY-LANGU
OPTIONS                           =
MAIL_SENDER                       =
MAIL_RECIPIENT                    =
MAIL_APPL_OBJECT                  =
RAW_DATA_INTERFACE                = '*'
SPONUMIV                          =
IMPORTING
LANGUAGE                          =
NEW_ARCHIVE_PARAMS                =
RESULT                            =
EXCEPTIONS
CANCELED                          = 1
DEVICE                            = 2
FORM                              = 3
OPTIONS                           = 4
UNCLOSED                          = 5
MAIL_OPTIONS                      = 6
ARCHIVE_ERROR                     = 7
INVALID_FAX_NUMBER                = 8
MORE_PARAMS_NEEDED_IN_BATCH       = 9
SPOOL_ERROR                       = 10
CODEPAGE                          = 11
OTHERS                            = 12
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT ITAB.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
   ELEMENT                        = 'MANU'
   FUNCTION                       = 'SET'
   TYPE                           = 'BODY'
   WINDOW                         = 'MAIN'
IMPORTING
PENDING_LINES                  =
EXCEPTIONS
ELEMENT                        = 1
FUNCTION                       = 2
TYPE                           = 3
UNOPENED                       = 4
UNSTARTED                      = 5
WINDOW                         = 6
BAD_PAGEFORMAT_FOR_PRINT       = 7
SPOOL_ERROR                    = 8
CODEPAGE                       = 9
OTHERS                         = 10
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDLOOP.
CALL FUNCTION 'CLOSE_FORM'
IMPORTING
RESULT                         =
RDI_RESULT                     =
TABLES
OTFDATA                        =
EXCEPTIONS
UNOPENED                       = 1
BAD_PAGEFORMAT_FOR_PRINT       = 2
SEND_ERROR                     = 3
SPOOL_ERROR                    = 4
CODEPAGE                       = 5
OTHERS                         = 6
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " zscript
The above one is first criteria just to understand how to send mail to the customers.
<b>Second criteria</b> is i have to send the mail to the particular customer with only their details, the process should continue until it sends to all the customers with their details for that particular date.
Please help me out.
I have seen so many posts in the sdn but not able to understand the functional modules, how they declare that and how does it works...
Please provide me a good material to understand the functional module and to declare them.
Please solve this query i'll reward them with very good points.
Thanks in advance.
A.Rafique.

Hi babar haroon,
Thanks for the link.....
I went through that link, i created smart form but i was not able to get the results because the pgm gets terminated after executing. I'll show u the code, the code is active. Please check out and tell me if i have missed anything in the code...
*& Report ZZZ_TEST3
REPORT ZZZ_TEST3.
*internal table declarations
data: i_otf type itcoo occurs 0 with header line,
      i_tline type table of tline with header line,
      i_receivers type table of somlreci1 with header line,
      i_record like solisti1 occurs 0 with header line,
*Objects to send mail.
      i_objpack like sopcklsti1 occurs 0 with header line,
      i_objtxt like solisti1 occurs 0 with header line,
      i_objbin like solisti1 occurs 0 with header line,
      i_reclist like somlreci1 occurs 0 with header line,
*workarea declaration.
      w_objhead TYPE soli_tab,
      w_ctrlop TYPE ssfctrlop,
      w_compop TYPE ssfcompop,
      w_return TYPE ssfcrescl,
      w_doc_chng typE sodocchgi1,
      w_data TYPE sodocchgi1,
      w_buffer TYPE string,"To convert from 132 to 255
Variables declarations
      v_form_name TYPE rs38l_fnam,
      v_len_in LIKE sood-objlen,
      v_len_out LIKE sood-objlen,
      v_len_outn TYPE i,
      v_lines_txt TYPE i,
      v_lines_bin TYPE i.
call function 'SSF_FUNCTION_MODULE_NAME'
*call function '/1BCDWB/SF00000105'
      exporting
      formname = 'ZZZ_TEST2'
      importing
      fm_name = v_form_name
      exceptions
      no_form = 1
      no_function_module = 2
      others = 3.
      IF sy-subrc <> 0.
      MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
      WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
      w_ctrlop-getotf = 'X'.
      w_ctrlop-no_dialog = 'X'.
      w_compop-tdnoprev = 'X'.
     CALL FUNCTION '/1BCDWB/SF00000105'
      EXPORTING
        ARCHIVE_INDEX              =
        ARCHIVE_INDEX_TAB          = itab1
        ARCHIVE_PARAMETERS         =
        CONTROL_PARAMETERS         =
        MAIL_APPL_OBJ              =
        MAIL_RECIPIENT             =
        MAIL_SENDER                =
        OUTPUT_OPTIONS             =
        USER_SETTINGS              = 'X'
      IMPORTING
        DOCUMENT_OUTPUT_INFO       =
        JOB_OUTPUT_INFO            = wa
        JOB_OUTPUT_OPTIONS         =
      EXCEPTIONS
        FORMATTING_ERROR           = 1
        INTERNAL_ERROR             = 2
        SEND_ERROR                 = 3
        USER_CANCELED              = 4
        OTHERS                     = 5
     IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
     ENDIF.
CALL FUNCTION v_form_name
      EXPORTING
      control_parameters = w_ctrlop
      output_options = w_compop
      user_settings = 'X'
      IMPORTING
      job_output_info = w_return
      EXCEPTIONS
      formatting_error = 1
      internal_error = 2
      send_error = 3
      user_canceled = 4
      OTHERS = 5.
      IF sy-subrc <> 0.
      MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
      WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
      i_otf[] = w_return-otfdata[].
      CALL FUNCTION 'CONVERT_OTF'
      EXPORTING
      format = 'PDF'
      max_linewidth = 132
      IMPORTING
      bin_filesize = v_len_in
      TABLES
      otf = i_otf
      lines = i_tline
      EXCEPTIONS
      err_max_linewidth = 1
      err_format = 2
      err_conv_not_possible = 3
      OTHERS = 4.
      IF sy-subrc <> 0.
      MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
      WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
      Convert PDF from 132 to 255.
      LOOP AT i_tline.
      Replacing space by ~
      TRANSLATE i_tline USING '~'.
      CONCATENATE w_buffer i_tline INTO w_buffer.
      ENDLOOP.
Replacing ~ by space
      TRANSLATE w_buffer USING '~'.
      DO.
      i_record = w_buffer.
      Appending 255 characters as a record
      APPEND i_record.
      SHIFT w_buffer LEFT BY 255 PLACES.
      IF w_buffer IS INITIAL.
      EXIT.
      ENDIF.
      ENDDO.
      Refresh: i_reclist,
      i_objtxt,
      i_objbin,
      i_objpack.
      clear w_objhead.
      Object with PDF.
      i_objbin[] = i_record[].
     DESCRIBE TABLE i_objbin LINES v_lines_bin.
      Object with main text of the mail.
      i_objtxt = 'Find attached the output of the smart form.'.
      APPEND i_objtxt.
     DESCRIBE TABLE i_objbin LINES v_lines_txt.
      i_objtxt = 'Regards,'.
      APPEND i_objtxt.
      i_objtxt = 'J.Jayanthi'.
      APPEND i_objtxt.
      DESCRIBE TABLE i_objtxt LINES v_lines_txt.
      Document information.
      w_doc_chng-obj_name = 'Smartform'.
      w_doc_chng-expiry_dat = sy-datum + 10.
      w_doc_chng-obj_descr = 'Smart form output'.
      w_doc_chng-sensitivty = 'F'. "Functional object
      w_doc_chng-doc_size = v_lines_txt * 255.
      Pack to main body as RAW.
      Obj. to be transported not in binary form
      CLEAR i_objpack-transf_bin.
      Start line of object header in transport packet
      i_objpack-head_start = 1.
      Number of lines of an object header in object packet
      i_objpack-head_num = 0.
      Start line of object contents in an object packet
      i_objpack-body_start = 1.
      Number of lines of the object contents in an object packet
      i_objpack-body_num = v_lines_txt.
      Code for document class
      i_objpack-doc_type = 'RAW'.
      APPEND i_objpack.
      Packing as PDF.
      i_objpack-transf_bin = 'X'.
      i_objpack-head_start = 1.
     i_objpack-head_num = 1.
      i_objpack-head_num = 0.
      i_objpack-body_start = 1.
      i_objpack-body_num = v_lines_bin.
      i_objpack-doc_type = 'PDF'.
      i_objpack-obj_name = 'Smartform'.
      CONCATENATE 'Smartform_output' '.pdf'
      INTO i_objpack-obj_descr.
      i_objpack-doc_size = v_lines_bin * 255.
      APPEND i_objpack.
      Document information.
      CLEAR i_reclist.
      e-mail receivers.
     i_reclist-receiver = '[email protected]'.
      i_reclist-receiver = '[email protected]'.
      i_reclist-express = 'X'.
      i_reclist-rec_type = 'U'. "Internet address
      APPEND i_reclist.
      Sending mail.
      CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
      EXPORTING
      document_data = w_doc_chng
      put_in_outbox = 'X'
      TABLES
      packing_list = i_objpack
      object_header = w_objhead
      contents_hex = i_objbin
      contents_txt = i_objtxt
      receivers = i_reclist
      EXCEPTIONS
      too_many_receivers = 1
      document_not_sent = 2
      document_type_not_exist = 3
      operation_no_authorization = 4
      parameter_error = 5
      x_error = 6
      enqueue_error = 7
      OTHERS = 8.
      IF sy-subrc <> 0.
      MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
      WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
Please reply me back, it is very urgent..
Thanks and regards.
A.Rafique

Create test scripts using e-Tester without using visual scripts

I'm new researching on e-Test suite.
I have the following question. Is there any possibility to create test scripts to run automatic tests without using the visual scripts created by e-Tester?
Today, we are using Selenium to make Web based tests and this tool is included in a custom framework developed in Java. So, we don't use record and play. Directly we create code using objects, methods and attributes provided by Selenium api.

You can create a dummy java agent script that can that call your module. The java agent script can then be automated to run in e-Load.
1) e-tester menu ->options->New Scripts (global) -> Advanced -> Java Agent: Check on "Create Java Agent Script.." and the other 2 check boxes.
2) menu -> File -> New Script
3) Do Nothing. No navigations, ect...
4) menu -> File -> Save Script i.e. "empty"
5) Download and install Eclipse IDE (other IDEs should work but you need to create your own project)
6) Eclipse -> Menu -> File -> Import -> General -> Existing Project into workspace: Select the root directory that contains the etester generated Java Agent script prefixed with the underscore "_" i.e c:\ETS\etest\Default!\_empty
7) Once imported I suggest you call your module from within scriptCallback.class EndScript(RunState, ScriptResult);
7b) When you get better at this you can return errors by changing the ScriptResult() object and view stats from the RunState() object.
8) You will have to modify the Eclipse Project to be dependent on your jars if you want to debug in eclipse. Secondly there are 2 batch files. These two batch files create the *.JWG file which is just a renamed .JAR file.
9) You MUST modify the batch files to create the new Empty.JWG including your *.JAR files.
10) I recommend compiling in eclispe and only running the makefileNocompile.bat (after you add the *.jar inclusion). Ignore the makefile.bat unless you also change the javac.exe execution line to include all the correct classpaths.
11) Once you are happy with running in Eclipse you should be able to execute in eload. I recommend you test the procedures steps 5 through 10 before adding your own module and code.

Help creating a script for backup

Hi everybody,
I would like to make some backups using rman and recovery flash area on oracle10g on my Debian.
I would like to make a full backup level 0 on Sunday and make incremental backups from Monday to saturday.The best would be to have one for hot backup and one for cold backups.
But I am wondering how to schedule a task using rman. For example is it possible to write a script that would make the backups at a desired time executed by oracle?
Or do I have to create a script on unix that should be executed by cron?
You know I am really bad at scripting, but it would really help me if you could help me creating a script that would make the backup automatically on sunday at midnight and incremental eveydays until sunday.Here is the information I need to put in a script:
#flash recovery area creation under sqlplus
SQL> ALTER SYSTEM SET DB_RECOVERY_FILE_DEST_SIZE = 10g SCOPE=BOTH SID='*';
SQL> ALTER SYSTEM SET DB_RECOVERY_FILE_DEST = '/home/oracle/flash_recovery_area' SCOPE=BOTH SID='*';
#setting the default variable
ORACLE_SID=iscream;
#connect to target database:
rman TARGET SYS/oracle@iscream NOCATALOG
#set the defaults values for rman
CONFIGURE DEFAULT DEVICE TYPE TO DISK;
CONFIGURE DEVICE TYPE DISK BACKUP TYPE TO COMPRESSED BACKUPSET;
CONFIGURE CONTROLFILE AUTOBACKUP ON;
CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 7 DAYS;
CONFIGURE RETENTION POLICY TO REDUNDANCY 2;
CONFIGURE BACKUP OPTIMIZATION ON;
Any help will be appreciated
synthese
hot backup
using rman
using flash_recovery_area
full backup set compressed on sunday
incremental backup set compressed from mondy to saturday
using disk
policy retenttion 7 days
redondance 2

You can backup using some unix shell scripts.
rman is not really good one.

Creating a script for inserting images

I am new to the scripting concept, so please forgive me when I use incorrect terminology.
I would like to create a script that will automatically place images in my InCopy document. Basically I want to type the names of image files in an InCopy document then run a script that will replace the name of the file with the actual image (either as an embedded image or as an image in a graphics frame, although the graphics frame might not work if the document isn't linked to an InDesign document.)
I'm assuming I'd have to identify the image name in some way (slashes or something before and after) and during the script I'd have to identify where to find the given images, such as which folder they are in.
Is this possible in InCopy?
Eventually, these InCopy documents will be used in InDesign. Would it be better/faster to use a script to import these images into InDesign instead of InCopy?
(In case the information is important, the images are all either .tif files or .eps files.)
Also, how do I find someone who can write this script for me? I'm assuming there are freelance programmer people out there... how do I find one?
Thanks for any advice/help you can give me!

senza wrote:
this is ok, this i understand now. But where to tell which schema for which user?I don't understand this question. You create a synonym in your own schema for the object you want a synonym for...
so instead of referencing
select * from scott.empyou would create a synonym for scott.emp, so you can do
select * from emp

Unable to create post script file in framemaker.

I installed TCS 4.0 licensed suite. Due to some reason I need to delete Adobe PDF from Devices and Printers. Since then I am unable to create post script file using framemaker. I have tried uninstalling and installing TCS 4.0 again, but all in vain. What should I do now?

If you delete critical parts of Acrobat there will be problems. Try doing a REPAIR of Acrobat Pro (from the Programs Control Panel), maybe it can undo the damage.

Creating a script to purge particular cursor in shared pool

hi Guys, not good in scripting need help
SQL> select * from v$version;
BANNER
Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
PL/SQL Release 11.1.0.7.0 - Production
CORE 11.1.0.7.0 Production
TNS for Solaris: Version 11.1.0.7.0 - Production
NLSRTL Version 11.1.0.7.0 - Production
SQL> !uname -a
SunOS 5.10 Generic_142909-17 sun4u sparc SUNW,SPARC-Enterprise
SQL>
we want to purge the cursor for particular sql id if the version_count exceeds more than 100 in shared pool.
So the action plan is
create a script and put in cron that will
select sql_id, version_count from v$sqlarea where sql_id ='32543gwegfdsg';
1 if version_count >100
then
select address, hash_value from v$sqlarea
where sql_id = '32543gwegfdsg';
ADDRESS HASH_VALUE
00000004FBDBE8D8 455331075
execute the procedure
exec sys.dbms_shared_pool.purge('&address, &hash_value','c')
Edited by: ricky on 19-Aug-2011 12:43 PM
Edited by: ricky on 19-Aug-2011 12:43 PM
Edited by: ricky on 19-Aug-2011 1:00 PM

exec sys.dbms_shared_pool.purge('&address, &hash_value','c')is V11.1 that much different from V11.2 for PURGE arguments?
SQL> desc dbms_shared_pool
PROCEDURE ABORTED_REQUEST_THRESHOLD
Argument Name               Type               In/Out Default?
THRESHOLD_SIZE           NUMBER               IN
PROCEDURE KEEP
Argument Name               Type               In/Out Default?
NAME                    VARCHAR2          IN
FLAG                    CHAR               IN     DEFAULT
PROCEDURE PURGE
Argument Name               Type               In/Out Default?
NAME                    VARCHAR2          IN
FLAG                    CHAR               IN     DEFAULT
HEAPS                    NUMBER               IN     DEFAULT
PROCEDURE SIZES
Argument Name               Type               In/Out Default?
MINSIZE               NUMBER               IN
PROCEDURE UNKEEP
Argument Name               Type               In/Out Default?
NAME                    VARCHAR2          IN
FLAG                    CHAR               IN     DEFAULT

To create a script and schedule which purge 30 days old files

Hi Friends,
Very new in Unix and i got a requirement like writing a script and schedule it, so that it removes 30 days old files from all the log locations of a unix box.
Suppose i have a unix server ltbamdev1 and in this server i have a mount point opt/bam. In this mount point i have 3 different folders like
/ltbamdev1/oracle/install/product/10.1.3.1/OracleAS_1/opmn/logs
/ltbamdev1/oracle/install/product/10.1.3.1/OracleAS_1/bpel/domains/default/logs
/ltbamdev1/oracle/install/product/10.1.3.1/OracleAS_1/bpel/domains/support/logs
Please help me in writing a script which runs once a week and removes all 30 days old files from these three folder locations.
Thanks in advance
Duos

Moderator Action:
The discussion is in the duplicate cross-post:
To create a script and schedule which purge 30 days old files
@O.P.
For the future, only make one post.
If it is in the wrong forum, it will likely get relocated by moderators.
This duplicate is now locked to prevent responses getting fragmented all over the place.

Need steps to create ant scripts for publishing and deploying projects.

Need steps to create ant scripts for publishing and deploying projects.
Have got ant, Oracle BPM Enterprise WL edition installed , Need to know what are the other configurations to be done.
Any working example would help me to understand, please do mail me at [email protected]
Thanks in advance.
-Sree

Sreekant,
Please find the build file to publish and deploy.
<project name="deployProject"
xmlns:fuego="antlib:fuego.tools.ant.enterprise"
xmlns:fuego.j2ee="antlib:fuego.tools.ant.j2ee" default = "publish">
          <property file="./Properties/fuego_deploy.properties"/>
          <fuego:passport id="fuego.passport"
directoryid="${fuego.directoryid}"
preset="engine" />
<target name="publish" description="Publish and deploy processes" depends = "takeInputs">

<fuego:session
passportref="fuego.passport"
verbose="true"
               properties="${fuego.basedir}/conf/directory.xml"
haltonerror="true" >

<fuego:publish fpr="${fuego.project.name}"
deploy="true"
engine="${fuego.engineName}"
                    importdata = "${fuego.importdata}"
                    automaproles="${fuego.automaproles}"
                    automapbuspars = "${fuego.automapbuspars}"
                    automapvars="${fuego.automapvars}"
                    automapconfigs = "${fuego.automapconfigs}">
</fuego:publish>
</fuego:session>
</target>
<target name= "takeInputs" >
<input
message="Please enter admin-username:"
addproperty="fuego.participant"
/>
<input
message="Please enter admin-password:"
addproperty="fuego.password"
>
</input>
</target>
</project>
and find the properties I have used..
fuego.basedir=C:\OraBPMEnterpriseHome
fuego.directoryid=default
fuego.engineName = bpmengine
fuego.project.name = E:/antExamples/Project/CommonUtilities
# If the below property is true then ant script imports data from the project, as defined in Studio.
# This includes importing:
#      •Holiday and Calendar rules
#      •Organizational Units
#      •Roles
#      •Resource configurations
#      •External Variables
fuego.importdata = true
#If the below property is true ant script automatically map abstract roles to real ones with the same name.
fuego.automaproles=true
#If the below property is true ant script automatically map business parameter variable names (as defined in the project design) to an business parameter variable id with the same name (as defined in the Fuego Enterprise directory).
fuego.automapbuspars = true
#If the below property is true ant script automatically map external variable names (as defined in the project design) to an external variable id with the same name (as defined in the Fuego Enterprise directory).
fuego.automapvars=true
#If the below property is true ant script automatically map External Resources configurations (as defined in the project design) to real Configurations with the same name (as defined in the Fuego Enterprise directory).
fuego.automapconfigs = true

How to create installation scripts in packaged application

can u tel me How to create installation scripts for packaged application.
also tell me , i have to first install scripts and then supporting objects or
supporting objects first then installation scripts..

Hi,
Depending upon your usecase there are different ways to implement this logic.
Check this for example (Read my answer in this post):
https://forums.sdn.sap.com/thread.jspa?threadID=349151
Also check these senarios:
http://help.sap.com/saphelp_nw70/helpdata/en/42/9ddf20bb211d72e10000000a1553f6/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/42/9ddcc9bb211d72e10000000a1553f6/frameset.htm
Also the delegation may be interesting for you:
http://help.sap.com/saphelp_nw70/helpdata/en/a0/44b742cafec96ae10000000a155106/frameset.htm
Greetings,
Praveen Gudapati

Creating shell script for cloning

Hi,
I am cloning 11.5.8 instance. For copying of files from source to production I use rcp command. I want to create shell script that copies the files and lwhen it is complete send an email to my rediffmail account.
There are 2 problems:-
1. How to track if rcp commaind has completed.
2. How to send out an email. I tried to send an email using sendmail but it gave me an error "stdin: Value too large for defined data type".
Please help.
Thanks & Regards,
Neeraj

Hi Neeraj,
I'd suggest using the exit code from the rcp command to drive your email step. For most commands in Linux, and exit code of 0 indicates success, and in most shells, the environment variable $? stores the exit code of the most recent command. So, you could do something like this:
rcp source_files target_location
if [[ $? -eq 0 ]]
then
echo "Huzzah\!" | mailx -s "RCP from source to target successful" your_username@your_host
else
echo "Bummer. Got exit code $? from rcp" | mailx -s "RCP from source to target failed" your_username@your_host
fiThe preceding advice is offered with three disclaimers:
1) I don't know which shell you're using (ksh, bash, csh?) -- my code snippet assumes ksh, but the principles should be the same in any shell
2) My morning coffee has not yet taken effect, so I may be completely wrong about something important :-)
3) The code above is untested, and will probably not work in any shell without modification.
Despite all that, hopefully this will put you on the right track.
Regards,
John P.
Message was edited by:
jpiwowar (minor clarification)

I want to create a script to enter text for me

I dont want to remember my long library card number when I am on their site. I want to create a script to type it for me. I want to associate the script with a hot key. How do I do this?I

Assuming the library site is a webpage, use 1Password. It will do the job for you and securely. Been using it for years for just this kind of thing.
https://agilebits.com/onepassword/mac
You have to pay for it but there's a full 30 day trial so you can see if it works for you before parting with the cash.
(Disclaimer: NO, I'm not assoc'd with the company, just a very satisfied user of this s/w for several years).

Error when generating create table script

Hi,
I am trying to generate create table script from an existing table. But I get the following error when doing so,
ORA-20001: Rem Unable to generate DDL for ORA-06502: PL/SQL: numeric or value error ORA-31605: the following was returned from LpxXSLResetAllVars in routine kuxslResetParams: LPX-1: NULL pointer ORA-22921: length of input buffer is smaller than amount requested .
Any suggestions on what could be wrong?
Thanks.
-B

this is my bad, i should have updated this thread when we originally troubleshot this issue...
that error you're getting on htmldb.oracle.com when you try to generate ddl for tables and such is a manifestation of a database bug (#3372908) that's recently been filed. checking the worklog for that bug suggests that those guys are still working out the issue. unfortunately, there's no current work-around on htmldb.oracle.com at the moment. if you want to generate ddl for your objects, you'd have to query the appropriate data dictionary views to get the info you need.
...i'll update the htmldb.oracle.com interface in a bit to prevent other users from hitting this issue. so you know, this is only an issue on db versions 9.2.0.3 and 9.2.0.4 running on some platforms and only (as far as i know) those using the AL32UTF8 characterset ...which does include our hosted site for now.
hope this helps,
raj

Is there default create DB script?

Similar Messages

Maybe you are looking for