Is there is a way to change the "Find and Replace" feature in Numbers 3.2 back to the way it used to be on Numbers '09 version 2.3?

In order to view my documents on my newly purchased Macbook Air I recently had to upgrade my 27" iMac to Numbers 3.2. The new version does fine for what I use it for except the new "find and replace" feature...It is TERRIBLE! It is so much slower than the older version. Plus I loved how the older version showed a table of all the matching word or items you're searching for and you could easily scroll through them to find the one that you were searching for.
My question is: Can you change the Find and Replace feature back to the way it used to be in version 2.3 or Number '09? If so, please show me how. I would really appreciate it.
The image below shows the new version on the left and the old version on the right just in case you don't know what I'm talking about...
Thank you.

Hi The.Gav,
Sad to say, but that feature has gone in Numbers 3.2
This discussion may help (or not)
Numbers - How use Find like the previous version?
Regards,
Ian.

Similar Messages

How do I change the sound that is played when you iI use the Find my IPhone feature to make it alot louder? The current sound is very faint, difficult to find as I am hard of hearing.

How do I change the sound that is played when you I use the Find my IPhone feature to make it alot louder? The current sound is very faint, difficult to find as I am hard of hearing.

Hi,
Tap the iPod icon in the Dock. Then tap the Airplay icon just to the right of the volume slider.
Make sure the iPad speakers are selected, not your wireless.
Carolyn

How to edit the find-and-replace dialog in Dreamweaver 8

For over 13 years I have been a happy user of Macromedia Dreamweaver 8. And I still see no reason to use any other program for editting PHP.
However, 1 thing has been bugging me for years. In the find-and-replace dialog there is a select "Find in". The options are in a dropdown.
I want this select to be a multiselector (not in functionality, but just so I don't need to click to get the dropdown, but just one click to select).
I read in the help at 'Customizing the appearance of dialog boxes' at point 4
On your disk, find the appropriate HTM file in the Configuration/Objects, Configuration/ Commands, or Configuration/Behaviors folder.
I've been searching but can not find the code for that dialog, althou it should be easy. Also did a search for that 'save' image, because once I find that, I can find this form, but its not in the macromedia folder.
how to edit the find-and-replace dialog in Dreamweaver 8?

It's looks less like an image and more like a form drop list to me.
Yes its a dropdown list. But to find the code for that select I tried to find the htm file that code is on by searching for the save-image which is also on that page (next to the yellow folder). I did a search on all folders in c:/programfiles/macromedia and that image is not in there. If I could find the image name, I could search the code for that and should find that htm (or javascript) which is outputting it, then the select must be near to that.
I also searched the code for the various texts on the page and got many hits, but not from the dialog page. I can't search dll files, so maybe thats where that code is in.

How do i put tv programmes and videos from itunes to another iphone, without having to delete all data on the phone and replacing it with my library? i switched the 'sync only ticked songs and videos box' yet it still wont let me transfer videos from my i

How do i put tv programmes and videos from itunes to another iphone, without having to delete all data on the phone and replacing it with my library? i switched the 'sync only ticked songs and videos' yet it still wont let me transfer videos from my itunes onto my new phone, any ideas??

Copy the entire itunes folder from the old computer to the new computer.

Does free version of VZ protect on LG G3 android have the find and lock features or just virus protection only

Does free version of VZ protect on LG G3 android have the find and lock features or just virus protection only. I've asked tech support several times and always get different answer. Am wondering if anybody uses free version and know if it has these features.
Thanks
floyd

Android has a find and lock feature built in that is accessible from your Google account. Just Google "Android Device Manager" and you can find/lock/erase your Android device from that page.
You have to activate it on your Android device first, but it's a quick setup.
Open the Google Settings App.
Click Android Device Manager.
Check the boxes.
Done.

Ipod touch 5 - when in song suffle mode, a random album will suddenly appear on the screen and then it is difficult to get back to the song that is playing

Just "upgraded" to a new ipod touch 5th generation after previously using various ipod classics. So I am not familiar with all the ins and outs of the device. One thing that I have a problem with is the fact that there does not seem to be a simple way, while in shuffle mode to quickly move to the next song or back to the prior song. But forgetting that for a moment, here is my problem and I am trying to figure out if it is a bug or simply some kind of "feature" of the ipod touch that I don't get.
I am playing music...in song - shuffle mode. All of a sudden, instead of the particular song that is playing, a different album shows up on the screen. Meanwhile, the original song keeps playing. When this happens, sometimes that album then starts playing and sometimes I am able to move the ipod touch in various directions and I can get back to the song that I was originally playing. Any idea what is happening here and how to stop it?
Thanks for any help.

Hello Philly,
I believe that when you reset your ipod(command given from the computer, right?) touch WHILE the ipod was updating, It cleared the system in the middle of writing files, thus corrupting(equivalent of cutting of in the middle of a sentence) the basic running system.
I suggest you go to an apple store and ask for a technical diagonosis in person. they may offer to help if the problem is fixable. If your ipod is still under warrenty, i would guess it would be free/low cost.
~Remember, I am just giving an educated guess on limited information

In the last 4 days, whenever I go off the internet and then click on Mozilla to go back on the internet I get a message that says that I have to close Firefox or restart the computer; however, Firefox is not running and I end up having to restart my compu

I go on and off the Internet several times every day. In the last 4 days, when I go off the Internet by "x" ing out Firefox and I then later in the day try to go back on the Internet, I get a message that states something to the effect that Firefox is running and I need to either close out Firefox or restart the computer. I always end up having to restart the computer.
== This happened ==
Every time Firefox opened
== In the past 4 days

Try the solutions at http://support.mozilla.com/en-US/kb/Firefox+hangs#Hang_at_exit

In my iBooks store I have the crime and thriller category, but can't get back to the main page with all the categories. Help!

iBooks

Is the store frozen i.e. can you navigate within that category ? You could try closing the iBooks app completely and then re-open it and see if it then works : from the home screen (i.e. not with iBooks 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the iBooks app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.

HT1689 can anyone simply tell me how to use the "find my ipod" feature through my itunes account that has the ipod registered?

Can anyone tell me how to use the "find my ipod" app that I have for my ipod? I have the ipod registered on my itunes account but I can get the serial # to send it in for apple support? How does this feature work? Thanks

Turn on your computer.
Open your Browser.
Go to icloud.com
Select find my iphone/ipod

I accidentally deleted all of the exceptions to the load images automatically list. What is the list of websites that are the exceptions and how do I get them all back onto the list at once?

I accidentally removed all sites in the tools->options->content->load all images automatically.
I need to know what the names of these sites are and how to get them all blocked again all at once.
== This happened ==
Just once or twice
== when i accidentally removed all sites from the list

There's no way to recover this list if you deleted the items, as it's not backed up.
Why did you have the sites blocked in the first place? You can simply re-block the sites as you see the images in order to re-build your list.

Using + and - keys to change dates and times; Find and Replace event

Hi all, \
I have two iCal related questions. One has been bugging me since the Snow Leopard upgrade and the other I'm just wondering about.
1. Is it just me or is it no longer possible to use the + and - keys to increment dates and times when editing an event? It seems that now I have to actually type in the numerals instead. Is there something in the preferences I'm missing or is that just the way it is now? Seems like a step backward, if so.
2. Is there a way to do a "find and replace" for an event that occurs sporadically throughout the year, but isn't a repeating event per se? I just want to rename the event itself.

Don,
...is it no longer possible to use the + and - keys to increment dates and times when editing an event?
I did not know that was possible. Try using the ↑/↓ arrow keys to increment numbers, and →/← arrow keys to change fields.
Is there a way to do a "find and replace" for an event that occurs sporadically throughout the year, but isn't a repeating event per se?
AFAIK, you have to use the search field to find the individual events, and change them when you click on the events in the search results field.
;~)

Find and replace in files does not refresh when changes are made

Using RH10, I search for a term with the Find and Replace Options pod. I use the Find Results list as a reference only, and open each file from the Topic List. I do this instead of opening the topics from the Find Results tab because I want to see the WYSIWYG changes. Anyway, I make my edits and delete the search term from each topic. Then, to make sure I have done all the work, I run the search again. I expect to see no or at least fewer matches than before, but I still get some or all of the same results as before, even though I double-check the Design and HTML views of the topics and even check the source of a topic separately in Notepad, all indicating that the search term is gone from the topic.
There is some ridiculous lingering or echo going on. I make sure to select Look in: <Current Project>, and the paths of all the Find Results files are fine. How do you refresh the search so that this echo doesn't occur?
Also, I close the Find and Replace Options pod, reopen it and start the search again, and the same results are there.
Message was edited by: DMilkes

Hi there
To avoid the message about the file being modified, close all topics in the editor before commencing with any find and replace operations. The message is produced because you have the aforementioned topics open in the editor.
As you mention "Find and replace in files", I'm guessing you are referring to version 8. I just opened version 8 and performed a find and replace to confirm. There is a button allowing you to clear all.
On the clicking and dragging to create a link, it's never worked that way. You simply cannot drag from the Topic List pod to do it. But you can from the Project Manager pod. Perhaps you should consider submitting a Wish Form to ask for the ability to click and drag from the Topic List pod to create links.
As far as rearranging your topics into different folders, as long as you do it from inside RoboHelp you shouldn't be destroying any links. RoboHelp will update references for you as you move things around. The only issue is if you are automatically creating your TOC structure based on the project structure. But usually that's a one time shot. From there forward you just manage things using the TOC editor.
Hopefully this helps... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

How to find and replacing the path (url) given for data binding from type 'datasocket'

Hi everyone,
I'm sorry to pose this question as my own knowledge is still very limited.
I have an assignment (bachelor level). We were asked to adjust a plc program in step7 so that multiple of an existing sequence could be run indepently.
The settings for that sequence are controlled by labview. Sensor data is also viewed in labview.
There is an existing labview VI that was made by someone else before us. It uses 'Datasocket' type for data binding. Because we would like to adjust this VI to be used with the other sequences, we would like to change the original path or URL quickly, as in a 'Find&Replace' solution. Yet the find and replace only works for objects or text, not entries in the properties.
Can someone please tell me if there is a way to do is, without having to use shared variables, as we are not at all known with this type.
Many thanks,
Niels

Dear Niels,
Please find the attached example. I placed 5 controls on the front panel, all with a data socket URL (control 1 = URL1, control 2 = URL2 etc). Through property nodes I did the following;
- I got a reference to the front panel
- with this reference we can get an array of references to the controls on this front panel
- one by one we will read the references and check the data socket URL from the control, we compare this with the URL we are searching
- if found, stop we will use the reference to write a new URL to the control.
Please notice the default values of the controls; it is set to search for URL3 and replace this with URL10, run the VI once and you will see that happening. I also included a sting indicator which will show you the label of the control which we find. Also a Boolean indicator in case we were not able to find the URL.
I downsaved the VI to 8.6, I'm not sure in which version you are working, if you have 8.6 or higher you are able to open it. Hope this brings you further,
Best regards,
Martijn S
Applications Engineer
NI Netherlands
Attachments:
findURLexample.vi ‏12 KB

In the new Numbers, can I find and replace within formulas like I used to in Numbers'09?

I use Numbers with quite long formulas with reference to other tables. With Numbers'09, it was extremely useful to copy formulas and then use "find and replace" to change the terms within.
Did they remove this option? I don't seem to be able to do that with the new Version.
If it's still there, where do I find it?
If it's not there.... why would they remove it.
Thanks

Basically, I use it for payroll, taxes, and so on... I have one sheet per employee (which compiles their weekly payroll). I have then different sheets which makes the quarterly taxes calculation (state and federal taxes - 941, 940, W2, disability, UI, paystubs, tracks payments and deadlines, etc... ). It took me awhile to write all of the formulas, but now it does everything for me.
When I add an employee. I have to add a sheet, but also add a line in the calculation sheets. Because all the employee sheets are the same format, all I need to do (or used to now) was to copy the line above, and just change the reference name of the employee sheet within the formula (because there are several terms that are looked up, the reference name comes several time in the formula)... changing it manually is really annoying. What was taking me a minute or so, before, now takes me about 20 minutes. (between the different sheets, there are about between 75 to 100 changes in formulas per new employee - so the "find and replace" in formula only, was extremely useful).

Win7, DW CS6, Find and Replace, Problem: The "Done or Found" message is cut off based on your SEARCH dropdown choice.

The Find and Replace "Done or Found" message is partially cut off for "Search" dropdown choices "Source Code, Text, Text (Advanced), but not for "Specific Tag". It appears to be a programming bug sizing the "Find" and "Replace" text boxes too big for the "find and Replace" window. Has anyone else encountered this problem.

Excuse me for resurrecting this, but I have been living with this same issue, and many more issues (I won't list them here), since migrating to CS5 (understood this thread is for CS6. However, my post is relevant none the less). If anyone has the fix I would love to know what they found. But sadly, I doubt there is one.
My system and display settings are also Win7 at 100% display. When doing a Find and Replace I can barely see what the results are for how many occurrences in the find window because the bottom is cutting off half of the text, just like the OP screen shot above. If the results reads "Done. 2 items found" it can easily be mistaken for "Done. 3 items found" if I don't study it carefully because of the bottom half of the "2" is cut off.
I don't want to rant here, but I will a little which I'll confess is the real purpose of my post. I am so disappointed in Adobe for so many different bugs in their software suite which they choose not to address, or even acknowledge as existing. I've had their tech support on the phone while they were recording my screen as I recreated issues for them, they never got back to me on any of them. I just got lip service how their engineers are looking into it and they'll get back to me. This of course was when CS5 still had free support under warranty.
At this point I'm numb to it all and I'm stuck using their software because I'm used to it, which ultimately is their goal anyway I'm sure. You win Adobe.
BTW...if anyone replies, please do not suggest the basic troubleshooting steps. All of the issues I've had exists after multiple re-installs on formatted hard drives and on both of my PCs made by two different manufacturers with different hardware specs (both exceeded min hardware requirements). Not to mention been through various techniques while on the phone with them..
Ahh... I feel better now.

Is there is a way to change the "Find and Replace" feature in Numbers 3.2 back to the way it used to be on Numbers '09 version 2.3?

Similar Messages

Maybe you are looking for