Is there some sort of adapter that i can use to plug my electric guitar into, so that i can record music into garage band?
Is there some sort of adapter that i can use to plug my electric guitar into, so that i can record music into garage band?
Probably but for that kind of expertise I would ask the experts in the GarageBand forum.
Similar Messages
-
I am having trouble sending an audio signal from my computer (mac pro early 2009) to my TV. Is there some interface or adapter that allows /enables the audio input from my computer to be sent to the TV (R,L signal?) any suggestions
just the audio, eh?. If you were using DVI or DisplayPort that might be different, but for audio alone, it shouldn't be that hard. Just grab a 3.5 mm stereo plug to 2 rca cables adapter. Plug the smaller end into the back of your Mac Pro (or the Front), where you see either the headphone or speaker icon). Alt-click on the speaker icon at the top of your screen to show all audio inputs and outputs. Make sure it's set to Line Out. Plug the red and white end into the audio in jacks on the back of your tv and set it to the correct input. I don't know if your tv will allow just the audio to play. Usually one has to connect up something else, but hopefully I'm wrong. If you were using DVI, or DisplayPort, you'd need an active DVI--HDMI adapter or a DisplayPort to HDMI adapter, but
I don't know for sure
J B -
Can i hook up my ipad to my photosmart 5510 direct with a usb and some sort of adapter?
Can I hook up my iPad 2 to my photosmart 5510 direct with a USB cord and some sort of adapter?
You'll need a printer that is compatible to AirPrint, see this article:
http://support.apple.com/kb/HT4356
You can't use the cord to connect.
There are apps inn the app store that let you print over the Internet, without having an AirPrint compatible printer. -
Is there some sort of make file defined for visual studio?
I see the compilation starts always from VCPlugInHeaders.cpp.
where does Visual studio compiler comes to know that which file to compile first?
Is there some sort of makefile defined somewhere?I see the compilation starts always from VCPlugInHeaders.cpp.
where does Visual studio compiler comes to know that which file to compile first?
Is there some sort of makefile defined somewhere? -
Hi, Ive been trying to hook up my M-Audio interface to my Mac Book Pro 15 laptop and it doesnt have the same size firewire port is there some kind of adapter i can buy?
Just Google for a Firewire 400 to Firewire 800 cable, you are sure that this is what you have I hope?
-
Does the macbook pro 2013 A1425 have a place to plug into ethernet or do I need to buy some sort of adapter?
http://store.apple.com/us/product/MD463ZM/A/thunderbolt-to-gigabit-ethernet-adap ter.
Clinton -
Why can't you print a cd jewel case listing of songs using iTunes. Is there some other way to do this without using iTunes?
Hi spider1950,
As long as you have the most recent update of iTunes (11.0.4), you should be able to print a jewel case insert directly from iTunes. You may find the following page useful:
Apple Support: Print CD Inserts
https://www.apple.com/findouthow/music/itunes.html#makecd-printinserts
Regards,
- Brenden -
Is there anyway to have multiple signature blocks without using an app? Will IOS 5 have that function?
"No" and "We don't know yet"
-
Hello everyone I have a question I use my Apple ID for iMessage but I want to know if I can use my friends Apple ID just for the App Store, can I do that ????
First on a computer try editing your ID to change the payment method to None.
How do I change my Apple ID Name or personal information?
You can change your Apple ID Name at My Apple ID. Click on Manage your Apple ID and sign in with your Apple ID name and password. Click Edit and enter the new information, then click Save Changes. Changes take effect immediately. You can also use My Apple ID to change your personal information, such as your mailing address or email address. See Changing the name you use for your Apple ID if you'd like more information.
If problems see:
Why can’t I select None when I edit my payment information?
Last:
Create a NEW account using these instructions. You have to use an email address not used with Apple before.
Create a NEW account using these instructions. Make sure you follow the instructions. Many do not and if you do not you will not get the None option. You must use an email address that you have not used with Apple before.
Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card -
My iPhone 4 was stolen, how do i lock it permanently using a serial number for instance so nobody can use it or access my personal information, knowing that the thief knows my personal passcode.. Please help, Thanx
You cannot lock it by the serial number. Report it to your carrier and the police. You said that the thief knows your pass code. Does that mean that the thief was a personal friend who would be close enough to you to know what your code was? If that is the case, ask your friend to return your phone.
-
I wanna ask about my iMessages, because everytime that I am using my apple ID it is always saying that my username and password was incorrect.But I am really sure that I have input the correct username as well as my password.How can I resolve this problem?
You can not merge accounts.
Apps are tied to the Apple ID used to download them, you can not transfer them. -
Is there a utility that can help me out? The mode changer utility only goes about halfway for what I need.
I think it's kind of annoying to have to switch modes, but I understand the reasoning behind it - I just wish there was a more convenient way to do it. This is a step in the right direction, but it is missing one key feature - it can't control anything outside of the modes.
I personally wish there was some way I could set up profiles, that I could then perhaps make a direct shortcut to and just double click to set it, rather than going through numerous menus. My specific issue is that I spend a lot of time with headphones, and a lot of time with speakers, both in and out of games.
Using 4. speakers in entertainment mode for music and movies, I use some eq to flatten the response, maybe 35% crystalizer, and cmss-3d surround. Switching to a game with speakers, I turn up the crystalizer a bit.
Using a very good set of headphones in entertainment mode, I MUST turn off CMSS-Headphones. It is an absolute atrocity, and destroys any semblance of detail in the music. I also need far less if any crystalizer, and virtually no eq.
Switching to game mode, I have to turn CMSS-headphone back on to get the 3d HRTFs activated. Since its a game, I use a bit more crystalizer.
Basically, any time I want to switch between headphones and speakers, or game and entertainment, I have to go back into the console to reconfigure everything if I want it sounding its best. I basically have to leave the console open all the time. This is so irritating to me, sometimes I forget, and find myself checking the console just to see if I got it right...there has to be a better way.Message Edited by bd2003 on 06-2-2006 05:34 PMYou can modify the method used on Mode Changer -utility by yourself.
Just add/edit 'movements' the way you wish the script to be working for you.
Here are 2 script examples you can use as a starting source. Movements on both scripts are based on Audigy 2 speaker selections option order which is :
st option 2/2. --> {HOME} or {END}{UP}{UP}{UP}{UP}
2nd option 4/4. --> {END}{UP}{UP}{UP}
3rd option 5. --> {END}{UP}{UP}
4th option Headphones --> {END}{UP}
5th option 6/6. --> {END}
!! You need to have Creative Audio Console installed to get these scripts working.
!! Close Audio Console before executing a script.
' ================== st script ====================
'----- Start Of "Headpones.vbs" ----- (Save as Headphones.vbs) ---------------------
Option Explicit
Dim WshShell
Set WshShell = CreateObject("WScript.Shell" )
' Script starts up the Audio Console
' !! RENAME THE PATH IF YOU HAVE AUDIO CONSOLE INSTALLED IN DIFFERENT PATH
WshShell.CurrentDirectory = "C:\Program Files\Creative\AudioConSole\"
WshShell.Run("CTAudRun.exe" )
' slower PC's --> sleep value maybe needed to be increased
WScript.Sleep(00)
' send some keystrokes to get the speaker settings box activated
' This is the locating 'routine' you use to get to the settings screen (selecting tabs and dialog)
WshShell.SendKeys("{TAB}{TAB}{RIGHT}{TAB}{TAB}" )
' set the speaker selection to Headphones (jump to last option and then up-arrow to previous option)
' here you set the setting option as you want it to be
WshShell.SendKeys("{END}{UP}" )
' exit Audio Console -panel
' If you have more settings to do you just add movements the way you need (like backing up to the tab selection etc.
WshShell.SendKeys("{TAB}{TAB}{ENTER}" )
WScript.Quit(0)
'----- End Of "Headphones.vbs" -------------------------------------------------------------
' ================== 2nd script ====================
'----- Start Of "5..vbs" ----- (Save as 5..vbs) -------------------------------------------
Option Explicit
Dim WshShell
Set WshShell = CreateObject("WScript.Shell" )
' Start up the Audio Console
' RENAME THE DIRECTORY IF YOU HAVE AUDIO CONSOLE INSTALLED IN DIFFERENT PATH
WshShell.CurrentDirectory = "C:\Program Files\Creative\AudioConSole\"
WshShell.Run("CTAudRun.exe" )
' slower PC's --> sleep value maybe needed to be increased
WScript.Sleep(00)
' send some keystrokes to get the speaker settings box activated
WshShell.SendKeys("{TAB}{TAB}{RIGHT}{TAB}{TAB}" )
' set the speaker selection to 5. item (jump to last option then up-arrow twice to 5.)
WshShell.SendKeys("{END}{UP}{UP}" )
' exit Audio Console -panel
WshShell.SendKeys("{TAB}{TAB}{ENTER}" )
WScript.Quit(0)
'----- End Of "Headphones to 5..vbs" -----
How it works? Copy script and paste it to Notepad --> edit the moves you want the script to execute and save as (all filetypes) --> name.vbs --> execute by double clicking the name.vbs file --> script opens the Audio Console and makes those moves you programmed into script (you'll see it on action).
jutapa -
I cant find old mail. Is there some sort of filing cabinet?
I have a very important old e-mail that I cannot find on my computer. I have used the search tool and looked through the folders that supposedly save all old messages. Am I looking in the wrong spot? Is there any type of filling cabinet where I can see all of my old mail?
MacBookNo, you can't.
-
I recently updated to Firefox 5.0, and I was pretty impressed with the app tabs. I usually use Firefox in private browsing mode, but recently I changed that to make use of the history function. However, I decided to change it back to permanent private browsing, and apparently my pinned tabs all just disappeared. Is there anyway I can change this?
App (pinned) tabs and Tab Groups (Panorama) are stored as part of the session data in the file sessionstore.js in the Firefox profile folder.<br />
If you use Private Browsing mode then no session data is stored to disk. -
If I don't keep closing down Firefox, when I check in the Activity Monitor it sometimes takes up more than a gig of memory, but I'm not doing anything that should take that much. Please can anyone help? It slows my whole system down, giving me that annoying beach ball all the time.
If you are having an issue with your Verizon service, you can use the Verizon Troubleshooter to fix and report issues with your Verizon Phone, FiOS TV, or Internet Service, as well as to schedule a repair, here is the link:
http://www.verizon.com/repair
You can find tools on the Verizon Residential Support page that may help you diagnose your issue:
http://www22.verizon.com/residentialhelp
Maybe you are looking for
-
I have a popup banner and also popup links that I have for sign-in or request info on my site using JavaScript, It always worked fine until I updated to Firefox 19. On other browsers there are no issues.
-
hi any1 pls help... how do i validate a jsp form which has example "x" textboxes with same name of choice<%=i%> and when i increase "i" i have another group of choices with another set of same names called choice<%=i+1%> i try using the code below bu
-
Nikon D610 raw files in CS6.
HOw can I open Nikon D610 raw files in cs6?
-
BEA AquaLogic BPM Studio BPEL issues
I'm finding lots of issues with this product including the following: wsdl won't import schema files -- presumbably fixed in this version but still not working the graphical business process editor won't show multiple copies within a single assign xp
-
Add the ability to flatten specific pages not the whole PDF
There are times when I need to flatten a PDF, or should I say part of a PDF and it would be nice to not have to extract pages then re-insert them.