Is there some sort of make file defined for visual studio?

I see the compilation starts always from VCPlugInHeaders.cpp.
where does Visual studio compiler comes to know that which file to compile first?
Is there some sort of makefile defined somewhere?

Similar Messages

Is there some sort of adapter that i can use to plug my electric guitar into, so that i can record music into garage band?

Is there some sort of adapter that i can use to plug my electric guitar into, so that i can record music into garage band?

Probably but for that kind of expertise I would ask the experts in the GarageBand forum.

Lucreate - Cannot make file systems for boot environment

Hello!
I'm trying to use LiveUpgrade to upgrade one "my" Sparc servers from Solaris 10 U5 to Solaris 10 U6. To do that, I first installed the patches listed on [Infodoc 72099|http://sunsolve.sun.com/search/document.do?assetkey=1-9-72099-1] and then installed SUNWlucfg, SUNWlur and SUNWluufrom the S10U6 sparc DVD iso. I then did:
--($ ~)-- time sudo env LC_ALL=C LANG=C PATH=/usr/bin:/bin:/sbin:/usr/sbin:$PATH lucreate -n S10U6_20081207 -m /:/dev/md/dsk/d200:ufs
Discovering physical storage devices
Discovering logical storage devices
Cross referencing storage devices with boot environment configurations
Determining types of file systems supported
Validating file system requests
Preparing logical storage devices
Preparing physical storage devices
Configuring physical storage devices
Configuring logical storage devices
Analyzing system configuration.
Comparing source boot environment <d100> file systems with the file
system(s) you specified for the new boot environment. Determining which
file systems should be in the new boot environment.
Updating boot environment description database on all BEs.
Searching /dev for possible boot environment filesystem devices
Updating system configuration files.
The device </dev/dsk/c1t1d0s0> is not a root device for any boot environment; cannot get BE ID.
Creating configuration for boot environment <S10U6_20081207>.
Source boot environment is <d100>.
Creating boot environment <S10U6_20081207>.
Creating file systems on boot environment <S10U6_20081207>.
Creating <ufs> file system for </> in zone <global> on </dev/md/dsk/d200>.
Mounting file systems for boot environment <S10U6_20081207>.
Calculating required sizes of file systems              for boot environment <S10U6_20081207>.
ERROR: Cannot make file systems for boot environment <S10U6_20081207>.So the problem is:
ERROR: Cannot make file systems for boot environment <S10U6_20081207>.
Well - why's that?
I can do a "newfs /dev/md/dsk/d200" just fine.
When I try to remove the incomplete S10U6_20081207 BE, I get yet another error :(
/bin/nawk: can't open file /etc/lu/ICF.2
Quellcodezeilennummer 1
Boot environment <S10U6_20081207> deleted.I get this error consistently (I ran the lucreate many times now).
lucreate used to work fine, "once upon a time", when I brought the system from S10U4 to S10U5.
Would anyone maybe have an idea about what's broken there?
--($ ~)-- LC_ALL=C metastat
d200: Mirror
    Submirror 0: d20
      State: Okay
    Pass: 1
    Read option: roundrobin (default)
    Write option: parallel (default)
    Size: 31458321 blocks (15 GB)
d20: Submirror of d200
    State: Okay
    Size: 31458321 blocks (15 GB)
    Stripe 0:
        Device     Start Block Dbase        State Reloc Hot Spare
        c1t1d0s0          0     No            Okay   Yes
d100: Mirror
    Submirror 0: d10
      State: Okay
    Pass: 1
    Read option: roundrobin (default)
    Write option: parallel (default)
    Size: 31458321 blocks (15 GB)
d10: Submirror of d100
    State: Okay
    Size: 31458321 blocks (15 GB)
    Stripe 0:
        Device     Start Block Dbase        State Reloc Hot Spare
        c1t0d0s0          0     No            Okay   Yes
d201: Mirror
    Submirror 0: d21
      State: Okay
    Submirror 1: d11
      State: Okay
    Pass: 1
    Read option: roundrobin (default)
    Write option: parallel (default)
    Size: 2097414 blocks (1.0 GB)
d21: Submirror of d201
    State: Okay
    Size: 2097414 blocks (1.0 GB)
    Stripe 0:
        Device     Start Block Dbase        State Reloc Hot Spare
        c1t1d0s1          0     No            Okay   Yes
d11: Submirror of d201
    State: Okay
    Size: 2097414 blocks (1.0 GB)
    Stripe 0:
        Device     Start Block Dbase        State Reloc Hot Spare
        c1t0d0s1          0     No            Okay   Yes
hsp001: is empty
Device Relocation Information:
Device   Reloc Device ID
c1t1d0   Yes    id1,sd@THITACHI_DK32EJ-36NC_____434N5641
c1t0d0   Yes    id1,sd@SSEAGATE_ST336607LSUN36G_3JA659W600007412LQFN
--($ ~)-- /bin/df -k | grep md
/dev/md/dsk/d100     15490539 10772770 4562864    71%    /Thanks,
Michael

Hello.
(sys01)root# devfsadm -Cv
(sys01)root# To be on the safe side, I even rebooted after having run devfsadm.
--($ ~)-- sudo env LC_ALL=C LANG=C lustatus
Boot Environment           Is       Active Active    Can    Copy
Name                       Complete Now    On Reboot Delete Status
d100                       yes      yes    yes       no     -
--($ ~)-- sudo env LC_ALL=C LANG=C lufslist d100
               boot environment name: d100
               This boot environment is currently active.
               This boot environment will be active on next system boot.
Filesystem              fstype    device size Mounted on          Mount Options
/dev/md/dsk/d100        ufs       16106660352 /                   logging
/dev/md/dsk/d201        swap       1073875968 -                   -In the rebooted system, I re-did the original lucreate:
<code>--($ ~)-- time sudo env LC_ALL=C LANG=C PATH=/usr/bin:/bin:/sbin:/usr/sbin:$PATH lucreate -n S10U6_20081207 -m /:/dev/md/dsk/d200:ufs</code>
Copying.
*{color:#ff0000}Excellent! It now works!{color}*
Thanks a lot,
Michael

Is there a way to make an exam for for multiple choice that would give you an automatic score?

s there a way to make an exam for for multiple choice that would give you an automatic score?

http://support.apple.com/kb/ht2493

C:\Program Files (86)\Microsoft Visual Studio 12.0\Common7\IDE\WDExpress.exe Side by Side Error

I used the sxstrace tool to find the error but ill admit im not sure what im doing. If you can please help me identify whats wrong that would be great!
=================
Begin Activation Context Generation.
Input Parameter:
Flags = 0
ProcessorArchitecture = Wow32
CultureFallBacks = en-US;en
ManifestPath = C:\Program Files (x86)\Microsoft Visual Studio 12.0\Common7\IDE\WDExpress.exe
AssemblyDirectory = C:\Program Files (x86)\Microsoft Visual Studio 12.0\Common7\IDE\
Application Config File = C:\Program Files (x86)\Microsoft Visual Studio 12.0\Common7\IDE\WDExpress.exe.Config
INFO: Parsing Application Config File C:\Program Files (x86)\Microsoft Visual Studio 12.0\Common7\IDE\WDExpress.exe.Config.
INFO: Parsing Manifest File C:\Program Files (x86)\Microsoft Visual Studio 12.0\Common7\IDE\WDExpress.exe.
INFO: Manifest Definition Identity is WDExpress,processorArchitecture="X86",type="win32",version="1.0.0.0".
INFO: Reference: Microsoft.Windows.Common-Controls,language="*",processorArchitecture="X86",publicKeyToken="6595b64144ccf1df",type="win32",version="6.0.0.0"
INFO: Reference: debuggerproxy.dll,processorArchitecture="X86",type="win32",version="1.0.0.0"
INFO: Reference: Microsoft.VisualStudio.CompilerHostObjectsProxy.dll,processorArchitecture="X86",type="win32",version="1.0.0.0"
INFO: Resolving reference Microsoft.Windows.Common-Controls,language="*",processorArchitecture="X86",publicKeyToken="6595b64144ccf1df",type="win32",version="6.0.0.0".
INFO: Resolving reference for ProcessorArchitecture WOW64.
INFO: Resolving reference for culture en-US.
INFO: Applying Binding Policy.
INFO: No publisher policy found.
INFO: No binding policy redirect found.
INFO: Begin assembly probing.
INFO: Did not find the assembly in WinSxS.
INFO: Attempt to probe manifest at C:\Windows\assembly\GAC_32\Microsoft.Windows.Common-Controls\6.0.0.0_en-US_6595b64144ccf1df\Microsoft.Windows.Common-Controls.DLL.
INFO: Did not find manifest for culture en-US.
INFO: End assembly probing.
INFO: Resolving reference for culture en.
INFO: Applying Binding Policy.
INFO: No publisher policy found.
INFO: No binding policy redirect found.
INFO: Begin assembly probing.
INFO: Did not find the assembly in WinSxS.
INFO: Attempt to probe manifest at C:\Windows\assembly\GAC_32\Microsoft.Windows.Common-Controls\6.0.0.0_en_6595b64144ccf1df\Microsoft.Windows.Common-Controls.DLL.
INFO: Did not find manifest for culture en.
INFO: End assembly probing.
INFO: Resolving reference for culture Neutral.
INFO: Applying Binding Policy.
INFO: No publisher policy found.
INFO: No binding policy redirect found.
INFO: Begin assembly probing.
INFO: Did not find the assembly in WinSxS.
INFO: Attempt to probe manifest at C:\Windows\assembly\GAC_32\Microsoft.Windows.Common-Controls\6.0.0.0__6595b64144ccf1df\Microsoft.Windows.Common-Controls.DLL.
INFO: Did not find manifest for culture Neutral.
INFO: End assembly probing.
INFO: Resolving reference for ProcessorArchitecture x86.
INFO: Resolving reference for culture en-US.
INFO: Applying Binding Policy.
INFO: No publisher policy found.
INFO: No binding policy redirect found.
INFO: Begin assembly probing.
INFO: Did not find the assembly in WinSxS.
INFO: Attempt to probe manifest at C:\Windows\assembly\GAC_32\Microsoft.Windows.Common-Controls\6.0.0.0_en-US_6595b64144ccf1df\Microsoft.Windows.Common-Controls.DLL.
INFO: Attempt to probe manifest at C:\Program Files (x86)\Microsoft Visual Studio 12.0\Common7\IDE\en-US\Microsoft.Windows.Common-Controls.DLL.
INFO: Attempt to probe manifest at C:\Program Files (x86)\Microsoft Visual Studio 12.0\Common7\IDE\en-US\Microsoft.Windows.Common-Controls.MANIFEST.
INFO: Attempt to probe manifest at C:\Program Files (x86)\Microsoft Visual Studio 12.0\Common7\IDE\en-US\Microsoft.Windows.Common-Controls\Microsoft.Windows.Common-Controls.DLL.
INFO: Attempt to probe manifest at C:\Program Files (x86)\Microsoft Visual Studio 12.0\Common7\IDE\en-US\Microsoft.Windows.Common-Controls\Microsoft.Windows.Common-Controls.MANIFEST.
INFO: Did not find manifest for culture en-US.
INFO: End assembly probing.
INFO: Resolving reference for culture en.
INFO: Applying Binding Policy.
INFO: No publisher policy found.
INFO: No binding policy redirect found.
INFO: Begin assembly probing.
INFO: Did not find the assembly in WinSxS.
INFO: Attempt to probe manifest at C:\Windows\assembly\GAC_32\Microsoft.Windows.Common-Controls\6.0.0.0_en_6595b64144ccf1df\Microsoft.Windows.Common-Controls.DLL.
INFO: Attempt to probe manifest at C:\Program Files (x86)\Microsoft Visual Studio 12.0\Common7\IDE\en\Microsoft.Windows.Common-Controls.DLL.
INFO: Attempt to probe manifest at C:\Program Files (x86)\Microsoft Visual Studio 12.0\Common7\IDE\en\Microsoft.Windows.Common-Controls.MANIFEST.
INFO: Attempt to probe manifest at C:\Program Files (x86)\Microsoft Visual Studio 12.0\Common7\IDE\en\Microsoft.Windows.Common-Controls\Microsoft.Windows.Common-Controls.DLL.
INFO: Attempt to probe manifest at C:\Program Files (x86)\Microsoft Visual Studio 12.0\Common7\IDE\en\Microsoft.Windows.Common-Controls\Microsoft.Windows.Common-Controls.MANIFEST.
INFO: Did not find manifest for culture en.
INFO: End assembly probing.
INFO: Resolving reference for culture Neutral.
INFO: Applying Binding Policy.
INFO: Auto Servicing Policy redirected assembly version.
INFO: Post policy assembly identity is Microsoft.Windows.Common-Controls,processorArchitecture="x86",publicKeyToken="6595b64144ccf1df",type="win32",version="6.0.7601.17514".
INFO: Begin assembly probing.
INFO: Attempt to probe manifest at C:\Windows\WinSxS\manifests\x86_microsoft.windows.common-controls_6595b64144ccf1df_6.0.7601.17514_none_41e6975e2bd6f2b2.manifest.
INFO: Manifest found at C:\Windows\WinSxS\manifests\x86_microsoft.windows.common-controls_6595b64144ccf1df_6.0.7601.17514_none_41e6975e2bd6f2b2.manifest.
INFO: End assembly probing.
INFO: Resolving reference Microsoft.Windows.Common-Controls.mui,language="*",processorArchitecture="x86",publicKeyToken="6595b64144ccf1df",type="win32",version="6.0.7601.17514".
INFO: Resolving reference for ProcessorArchitecture WOW64.
INFO: Resolving reference for culture en-US.
INFO: Applying Binding Policy.
INFO: No publisher policy found.
INFO: No binding policy redirect found.
INFO: Begin assembly probing.
INFO: Did not find the assembly in WinSxS.
INFO: Attempt to probe manifest at C:\Windows\assembly\GAC_32\Microsoft.Windows.Common-Controls.mui\6.0.7601.17514_en-US_6595b64144ccf1df\Microsoft.Windows.Common-Controls.mui.DLL.
INFO: Did not find manifest for culture en-US.
INFO: End assembly probing.
INFO: Resolving reference for culture en.
INFO: Applying Binding Policy.
INFO: No publisher policy found.
INFO: No binding policy redirect found.
INFO: Begin assembly probing.
INFO: Did not find the assembly in WinSxS.
INFO: Attempt to probe manifest at C:\Windows\assembly\GAC_32\Microsoft.Windows.Common-Controls.mui\6.0.7601.17514_en_6595b64144ccf1df\Microsoft.Windows.Common-Controls.mui.DLL.
INFO: Did not find manifest for culture en.
INFO: End assembly probing.
INFO: Resolving reference for ProcessorArchitecture x86.
INFO: Resolving reference for culture en-US.
INFO: Applying Binding Policy.
INFO: No publisher policy found.
INFO: No binding policy redirect found.
INFO: Begin assembly probing.
INFO: Did not find the assembly in WinSxS.
INFO: Attempt to probe manifest at C:\Windows\assembly\GAC_32\Microsoft.Windows.Common-Controls.mui\6.0.7601.17514_en-US_6595b64144ccf1df\Microsoft.Windows.Common-Controls.mui.DLL.
INFO: Attempt to probe manifest at C:\Program Files (x86)\Microsoft Visual Studio 12.0\Common7\IDE\en-US\Microsoft.Windows.Common-Controls.mui.DLL.
INFO: Attempt to probe manifest at C:\Program Files (x86)\Microsoft Visual Studio 12.0\Common7\IDE\en-US\Microsoft.Windows.Common-Controls.mui.MANIFEST.
INFO: Attempt to probe manifest at C:\Program Files (x86)\Microsoft Visual Studio 12.0\Common7\IDE\en-US\Microsoft.Windows.Common-Controls.mui\Microsoft.Windows.Common-Controls.mui.DLL.
INFO: Attempt to probe manifest at C:\Program Files (x86)\Microsoft Visual Studio 12.0\Common7\IDE\en-US\Microsoft.Windows.Common-Controls.mui\Microsoft.Windows.Common-Controls.mui.MANIFEST.
INFO: Did not find manifest for culture en-US.
INFO: End assembly probing.
INFO: Resolving reference for culture en.
INFO: Applying Binding Policy.
INFO: No publisher policy found.
INFO: No binding policy redirect found.
INFO: Begin assembly probing.
INFO: Did not find the assembly in WinSxS.
INFO: Attempt to probe manifest at C:\Windows\assembly\GAC_32\Microsoft.Windows.Common-Controls.mui\6.0.7601.17514_en_6595b64144ccf1df\Microsoft.Windows.Common-Controls.mui.DLL.
INFO: Attempt to probe manifest at C:\Program Files (x86)\Microsoft Visual Studio 12.0\Common7\IDE\en\Microsoft.Windows.Common-Controls.mui.DLL.
INFO: Attempt to probe manifest at C:\Program Files (x86)\Microsoft Visual Studio 12.0\Common7\IDE\en\Microsoft.Windows.Common-Controls.mui.MANIFEST.
INFO: Attempt to probe manifest at C:\Program Files (x86)\Microsoft Visual Studio 12.0\Common7\IDE\en\Microsoft.Windows.Common-Controls.mui\Microsoft.Windows.Common-Controls.mui.DLL.
INFO: Attempt to probe manifest at C:\Program Files (x86)\Microsoft Visual Studio 12.0\Common7\IDE\en\Microsoft.Windows.Common-Controls.mui\Microsoft.Windows.Common-Controls.mui.MANIFEST.
INFO: Did not find manifest for culture en.
INFO: End assembly probing.
INFO: Resolving reference debuggerproxy.dll,processorArchitecture="X86",type="win32",version="1.0.0.0".
INFO: Resolving reference for ProcessorArchitecture WOW64.
INFO: Resolving reference for culture Neutral.
INFO: Applying Binding Policy.
INFO: No binding policy redirect found.
INFO: Begin assembly probing.
INFO: Did not find the assembly in WinSxS.
INFO: Did not find manifest for culture Neutral.
INFO: End assembly probing.
INFO: Resolving reference for ProcessorArchitecture x86.
INFO: Resolving reference for culture Neutral.
INFO: Applying Binding Policy.
INFO: No binding policy redirect found.
INFO: Begin assembly probing.
INFO: Did not find the assembly in WinSxS.
INFO: Attempt to probe manifest at C:\Program Files (x86)\Microsoft Visual Studio 12.0\Common7\IDE\debuggerproxy.dll.DLL.
INFO: Attempt to probe manifest at C:\Program Files (x86)\Microsoft Visual Studio 12.0\Common7\IDE\debuggerproxy.dll.MANIFEST.
INFO: Attempt to probe manifest at C:\Program Files (x86)\Microsoft Visual Studio 12.0\Common7\IDE\debuggerproxy.dll\debuggerproxy.dll.DLL.
INFO: Attempt to probe manifest at C:\Program Files (x86)\Microsoft Visual Studio 12.0\Common7\IDE\debuggerproxy.dll\debuggerproxy.dll.MANIFEST.
INFO: Did not find manifest for culture Neutral.
INFO: End assembly probing.
ERROR: Cannot resolve reference debuggerproxy.dll,processorArchitecture="X86",type="win32",version="1.0.0.0".
ERROR: Activation Context generation failed.
End Activation Context Generation.

Hello,
I saw a related thread from here:
http://stackoverflow.com/questions/15130609/visual-studio-2012-side-by-side-configuration-is-incorrect
The dll in that thread is different from there but I think you can still try the solution listed there to repair your VS installation.
May I clarify some questions? Can you use Visual Studio before you get this error? Is it the first time you installed Visual Studio and when you try to open it it reports this error for you?
If you can use Visual Studio before you get this error, please try repair Visual Studio from control panel.
If you cannot use Visual Studio even when it is the first time to load, then it is a corrput installtion problem. Please remove the current installation:
http://support.microsoft.com/en-us/kb/2771441 Then download and verify the ISO:https://www.visualstudio.com/en-us/downloads/visual-studio-2013-iso-sha1-vs
And restart the installtion with a healthy ISO.
Anyway, in my mind refer to the first stackoverflow thread and repair the installtion to fix this missing dll problem is more reasonable.
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Getting error when updating the JavaScript API for Office and manifest schema files in your Visual Studio project from version 1.0 to 1.1

Hi,
I`m getting error message like "None of the apps in your project can be activated in the target. The manifest file of one or more apps contain API sets or Office applications that are not supported by
the target Office client. To debug those apps, update manifest files to exclude any unsupported API sets or Office applications, and then start the project again. Alternatively, you can debug your apps by using Office 365 as a target." when when
updating the JavaScript API for Office and manifest schema files in your Visual Studio project from version 1.0 to 1.1 in manifest file though i have added host elements.
any help in this regard is highly appreciated
Thanks,
Santosh Sutar

Hi Satosh Sutar,
Based on the description, you got the error message when you update the apps from version 1.0 to 1.1.
From the error message, it seems the menifest include some settings no allowed in the new version. Would you mind sharing more detail about how you update the project?
And here is an article about updating apps for Office and menifest schema files in the project for your reference:
How to: Update the JavaScript API for Office and manifest schema files in your Visual Studio project from version 1.0 to 1.1
Regards & Fei
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Download a Project file for Visual Studio regarding the Kinect for Windows v2? Getting Started with Kinect Development in Visual Studio

I am currently trying to make an application for Kinect for Windows v2 but I am entirely new to Visual Studio and Kinect development and could use some help getting started. I honestly have no idea where or how to start and I figured the easiest thing would
be to obtain a simple project file and examine how it works myself, but I have been unable to find one. The easiest thing would be if I could obtain a project file for Visual Studio that is an application which overlays the Skeletal model over people in real
time, though similar project files would also be appreciated. The app I am making largely involves things similar to overlaying the skeletal model on bodies so this would get me off to a great start and show me how the code is laid out within visual studio
simultaneously. (I would prefer the code to be in C# if that is possible but other languages also work).
I have checked out some of the guides for kinect development but they all assume you know how visual studio works so I cannot get very far in them. Thus if you know of a good guide to get me started with visual stuido AND the Kinect then I would be glad
to here that as well.
Alternatively, and I know this is not the right place for this, I have Matlab, which I know works for the Kinect v1 but can't find support for it regarding the v2, so if you could point me in the right direction on how to get it to work with the Kinect v2
THAT would also work incredibly well as I am much more familiar with Matlab.
I already have Visual Studio Ultimate 2013 installed, as well as the Kinect SDKv2.0, the physical Kinect for Windows v2, and my laptop meets all of the requirements for development so those are not issues.
Thanks in advance for any advice you can give me!

Hi Jicnon,
Thank you for posting in MSND forum.
Since this forum is discuss: Visual Studio WPF/SL Designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System, and Visual Studio Editor. About your issue, I think that it is
more related to the Kinect for Windows v2, so I suggest you can post this issue directly to Kinect for Windows v2 SDK forum:https://social.msdn.microsoft.com/Forums/en-US/home?forum=kinectv2sdk
,maybe you will get better support.
In addition, I find a similar thread about your issue, maybe you will get some useful message.
https://social.msdn.microsoft.com/Forums/en-US/92b23946-53d2-419c-8624-66e6c390617f/information-to-start-project-with-kinect-for-windows-v2?forum=kinectv2sdk
Thanks for your understanding.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Microsoft Office Customiziatoin Installer : Error during installation, file:///c:/Program Files (x86)/Microsoft Visual Studio Excel 2013, Windows 7 64 bit

How do I get ride of the Microsoft Office Customization Installer Error during installation, Name: file:///c:/Program Files (x86)/Microsoft Visual Studio From: 10.0/Common7/IDE/PrivateAssemblies/Microsoft.VisualStudio.QualityTools.LoadTestExcelAddIn.vsto
Downloading file: :///c:/Program Files (x86)/Microsoft Visual Studio 10.0/Common7/IDE/PrivateAssemblies/Microsoft.VisualStudio.QualityTools.LoadTestExcelAddIn.vsto did not succeed
Details:
Name:
From: file:///c:/Program Files (x86)/Microsoft Visual Studio 10.0/Common7/IDE/PrivateAssemblies/Microsoft.VisualStudio.QualityTools.LoadTestExcelAddIn.vsto
************** Exception Text **************
System.Deployment.Application.DeploymentDownloadException: Downloading file:///c:/Program Files (x86)/Microsoft Visual Studio 10.0/Common7/IDE/PrivateAssemblies/Microsoft.VisualStudio.QualityTools.LoadTestExcelAddIn.vsto did not succeed. ---> System.Net.WebException:
Could not find file 'c:\Program Files (x86)\Microsoft Visual Studio 10.0\Common7\IDE\PrivateAssemblies\Microsoft.VisualStudio.QualityTools.LoadTestExcelAddIn.vsto'. ---> System.Net.WebException: Could not find file 'c:\Program Files (x86)\Microsoft Visual
Studio 10.0\Common7\IDE\PrivateAssemblies\Microsoft.VisualStudio.QualityTools.LoadTestExcelAddIn.vsto'. ---> System.IO.FileNotFoundException: Could not find file 'c:\Program Files (x86)\Microsoft Visual Studio 10.0\Common7\IDE\PrivateAssemblies\Microsoft.VisualStudio.QualityTools.LoadTestExcelAddIn.vsto'.
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy, Boolean useLongPath,
Boolean checkHost)
at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options, String msgPath, Boolean bFromProxy)
at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, Boolean useAsync)
at System.Net.FileWebStream..ctor(FileWebRequest request, String path, FileMode mode, FileAccess access, FileShare sharing, Int32 length, Boolean async)
at System.Net.FileWebResponse..ctor(FileWebRequest request, Uri uri, FileAccess access, Boolean asyncHint)
--- End of inner exception stack trace ---
at System.Net.FileWebResponse..ctor(FileWebRequest request, Uri uri, FileAccess access, Boolean asyncHint)
at System.Net.FileWebRequest.GetResponseCallback(Object state)
--- End of inner exception stack trace ---
at System.Net.FileWebRequest.EndGetResponse(IAsyncResult asyncResult)
at System.Net.FileWebRequest.GetResponse()
at System.Deployment.Application.SystemNetDownloader.DownloadSingleFile(DownloadQueueItem next)
--- End of inner exception stack trace ---
at Microsoft.VisualStudio.Tools.Applications.Deployment.ClickOnceAddInDeploymentManager.GetManifests(TimeSpan timeout)
at Microsoft.VisualStudio.Tools.Applications.Deployment.ClickOnceAddInDeploymentManager.InstallAddIn()

I discovered the cause of this problem. I had pointed my "My Documents" folder to a NAS drive that I had rather than my C drive. Apparently Photoshop was dependant on it being on the C dirve. When I repointed this back to my C drive CS5 installed properly.

When I inherit Form with binding DataSet why then designer find mdb file in 'C:\Program Files (x86)\Microsoft Visual Studio 12.0\Common7\IDE\'

When I inherit Form with binding DataSet why then designer find mdb file in 'C:\Program Files (x86)\Microsoft Visual Studio 12.0\Common7\IDE\'
Do I have to anything to change in my application settings or what I am doing wrong?
When I inherit a plain Form with no binding DataSet then is all ok.

I finally saw my longingly expected inherited window containing binding dataset.
But only by way that I put mdb file right in to the this damn path.
"c:\Program Files (x86)\Microsoft Visual Studio 12.0\Common7\IDE\Zdrojove Data\ISMS2003.mdb"
In addition mdb file shall be clear too of password.
We have many windows in our application and we have to work strongly good with inheritance of Form Classes.
But how I will explain to my Boss if he click on that inherited window and will see this break window?
Though I will advice to my Boss that hi have to copy too that MDB files to this damn path,
but the best way could be to find what I need to change that this inherited windows shows without copy this MDB files to
'C:\Program Files (x86)\Microsoft Visual Studio 12.0\Common7\IDE\'
When I check the settings for DataDirectory every paths looks good.
Even if I set password for the mdb file I almost see only broken designer window.
Only by copy this MDB file without his password to this path
'C:\Program Files (x86)\Microsoft Visual Studio 12.0\Common7\IDE\'
I can see this inherited window right.

I just recieved an iPad mini iOS 7 and currently use an Android 2.2 phone which I would like to share stuff by way of bluetooth. It says that they are paired, but won't connect. Are they not compatible? Or is there some app that makes it work?

I have been able to pair them, but they wont' connect. Is there a compatibility issue? Or is there some app that I can get to make it work?

iOS does not support file sharing over BT. To the best of my knowledge, there are no apps that will allow sharing from iOS to Android over BT but, I could be wrong.
You can use a service such as DropBox. Or just email things.
Best of luck.

Is there some sort of "on click event" when i want to open a subreport?

Post Author: muk
CA Forum: .NET
hi,first time here, but ive been playing with crystal reports for a bithere is my situartion:i have an main report where i display deliveries for example:
name customer date1 delivery1..... goto subreport date2 delivery1.... goto subreport ....
problem is that my deliveries are in an different database then the info in the subreport, i know how to connect them, but i need to set the position of the database of the subreport when the user clicks on the "goto subreport" ( this is on demand subreport + linkt to the customers name)is there an on click or on open event for this? so i can set the possition in my form where the crystalreport view is displayedthe database in the main is one that i make every month for example delivery 11-07.mdb, in the subreport i have info of the delivery : info 11-07-07.mdb when the user clicks on the subreport i need to open the db of the day he selected.
any help would be greatfull thx in advance

That can be a problem with the Ask<i></i>.com toolbar (Tools > Add-ons > Extensions)
Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]

I no longer see the URL of any website so can't copy and past URLs into any emails, etc. Is there some setting to make URLs visible? when I updated, the URLs disappeared. I'm on a MacBook.

When I updated to the latest version of Firefox, the URLs disappeared so they are no longer visible at the top of the Firefox page. I can enter sites, but I can't copy and past the URLs anymore. Why can't I see the http://... info anymore? Is there some setting I changed or what might be the problem?
thanks.
TVDoc

Try this:
Click on the orange Firefox tab > Highlight Options > click Navigation Toolbar.

Is there any sort of anti sms bomber for iphone

Does anyone know of any sort of anti sms bomber for iphone because being sms bombed is super annoying

Nothing like that available as an app for the iPhone, you need to contact your service provider.

VS2010: Why does my C:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include does not get all the needed header files?

Hello,
I have installed VS2010 Professional. I have done a full install. The I install the 2010 redistributable and 2010 SP1. So I think I have installed all the needed products. But my include files has only 3 files :(. anmintrin.h, srv.h, wmiatlprov.h. My colleagues
who have installed the same three products have some 200 header files. My guess these header files are coming from some SDK or so. I have 5.0, 6.0A, 7.0A. 7.1A, 8.0, 8.0A SDKS installed. What am I missing?
Please check this http://stackoverflow.com/questions/13656856/cant-get-visual-studio-c-include-file-excpt-h-to-get-installed and there the person tells to practically remove all and install all and another answer says just copy it. My hope is Microsoft
might have a more logical and technical answer than doing something blindly without rhyme or reason
A clear cut answer might help the community.
thanks
ananda

Hi Ananda Vardhana,
What about your issue now?
If you have resolved it, you can share the solution here, which will be beneficial for other members with the same issue.
If you did not, whether you can provide us more information as Barry said for resolving this issue?
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Adequate File Server for Design Studio

I am looking for feedback on the new mac mini. Hopefully, there are a number of you who have experience in the matter.
My company will soon have several designers on staff. Currently, my Mac Pro is serving as the file server for the company. This is not ideal, as I would like to use my Mac Pro as a work station. We have a ReadyNAS in the office, but it's sluggish performance would never hold up with our work flow. I need a file server that can handle less than 10 designers working on large files. Ideally, I would also like to find something that acts as an in-house web server.
The new Mac Mini with Thunderbold looks like it could fit the bill, but I would love to hear from people who are using the machine in a similar setup. Could the mini provide adequate performance as a file server? If so, what upgrades should I consider?
I am also looking at attaching the LaCe Little Big DIsk for the files. If I understand correctly, this should run as quickly as an internal drive, correct?
I would love to hear your feedback and any alternative suggestions.

I recently purchased a Mac Mini i& 2.0 with 7200RPM Drives and a Promise Pegasus R6 12TB File Server.
Everything worked great for 48 hours, but then my Pegasus Server droped a drive... Promise is RMAing me a replcement drive, but that takes about a week to get... I have heard issues with Promise RAIDs coming with 1 Bad drive, but I thought I was safe since I didn't have one after the 6 hour initialization process. The new drive wil be here by Friday, and hopefully I can do some tests on this thing to see if anything else goes wrong before the "Return/Refund" date is up. I really can't afford to have a $2,000 RAID PaperWeight.
I also asked Promise if I could simply go to "Best Buy" and get a replacement drive to get me back up and going (even though the server is still running I am apprehensive about using it without a "Redundant drive"), Promise said that the server will only work with "Apple Approved" drives, and only Promise can ship though drives, so I could not just go get a 2TB 7,200 RPM drive and replace the defective one myself.
Not sure there is any truth to this, but since the parts are under warranty for 2 years, I guess it doesn't matter as its not costing me anything but time and from using the new $2K server.
I thought about Drobo Pro servers too, but the reviews of them seemed 10 times worse that what I read about the Promise Servers.
Anyone out there has these R6 Pegasus Servers, care to comment? Should I cut my loses and return this thing or should I stick it out?

Is there some sort of make file defined for visual studio?

Similar Messages

Maybe you are looking for