Is this a bug in cropping guide?

I have an image in Develop, with at least one side panel off. I turn on the crop guide (r), and image goes blurry. Turn it off, and image goes sharp again. No "Loading" at the bottom. Seems to show more on a horizontal image, but that may be because it is larger. Sometimes it seems worse than others, so it may be a system problem. Here is my system info.

photo printer wrote:
Yes, I did understand what you were saying. But as I said, it shows up with no change it image size. If I have a horizontal image open in Develop, set on Fit, with both sidebars off (tab), and the top & bottom bars minimized. The image almost fills the screen. Now, if I hit R, so the guide appears, the image size does not change, the only difference is the guides are on. Sometimes the image will fuzz, and sometimes not. The "Loading" is not showing at the bottom. And, as I said, the only reason that the images I uploaded are different, is because I did a poor job not getting the marguee the same. When I did a screen capture, and brought them into PS to crop them down, they were identical size. The more I play around with it, the more I am thinking it is not a bug, just something to do with rendering. This shoot that I used for the images, was real bad about this while I was working through it. Now, two days later, none of the images show any signs of this at all. Go figure.
Photo Printer,
There is a rendering bug that Adobe is aware of regarding partially rendered (or stuck unrendered) images in Develop module while in Fit mode (usually remedied by resizing the "fit" window smaller, etc.), but I'm not sure that is what you were seeing.
Jay S.

Similar Messages

Is this a bug in OWB 11.2 - importing table metadata for character columns

The Oracle® Warehouse Builder Data Modeling, ETL, and Data Quality Guide provides an overview of the data types supported.
http://docs.oracle.com/cd/E11882_01/owb.112/e10935/orcl_data_objx.htm
It says that for VARCHAR2 data type it saws (http://docs.oracle.com/cd/E11882_01/owb.112/e10935/orcl_data_objx.htm#CHDFIADI )
"Stores variable-length character data. How the data is represented internally depends on the database character set. The VARCHAR2 data type takes a required parameter that specifies a maximum size up to 4,000 characters"
That means , I guess, it says that when I import a table, any columns of type VARCHAR2(10) in the database should have its length show as characters in OWB, so a column of type Varchar2(10) in the Oracle database, should be shown as Varchar2(10) when imported into OWB table metadata via the OWB import function.
However, if I have a database that set-up as a single-byte and import a table using the OWB import function a column that has a size of e.g. 10 in the database, is imported as OWB table metadata and the size is 10. Correct, I am happy.
However, if the database is modified to support multi-byte characters, ALTUF16 encoding with the semantics set to "CHAR", then when I import the same table into OWB, OWB reports the size as 40, I guess its 40 bytes as in 10 characters @ 4 bytes per character.
Is this a bug in OWB, as the datatype in the Oracle DB is varchar2(10), should OWB after importing a table not also report the column as VARCHAR2(10) ? Currently, is shows the column as varchar2(40).

I noticed that myself in our project.
Our varchars2 are defined as VARCHAR2(xxx CHAR) - OWB puts the size*4
In fact if you have special characters like umlauts (ü,ä,ö,...) it will use 4 bytes per character.
You can try it yourself. Define a Varchar2(1 CHAR) and manually change the size of the Column in your mapping inside OWB (in filters, joins or your target table).
Then shoot an umlaut through the mapping and will end up with a "too small" error.
Dont mind the size*4 issue - we totally ignored it and run without error since 4 years now.

Is this a bug in JVM?

Hello all.
Whenever I try to make JNI calls to Ms Word in multiclient environment on server, the JVM closes with the following message.
Another exception has been detected while we were handling last error.
Dumping information about last error:
ERROR REPORT FILE = (N/A)
PC = 0x19BFC46D
SIGNAL = -1073741819
FUNCTION NAME = (N/A)
OFFSET = 0xFFFFFFFF
I am using JRE1.4.0 .
The heap size of JVM I have set is 256 MB.
Is this a bug in JVM?
Please guide me in this problem if possible because it is urgent for me.
Thanks in advance.

Hallo,
if I understand your problem correctly, you are trying to call MS Word on your server from Java code in your server. This is not to be recommended!
I have seen references to this problem elsewhere in the Sun forums but cannot at the moment find them. There is also something in MSDN. As far as I remember, the story goes like this:
1. Word is a program for client PCs.
2. Word expects to have a GUI available for it to display messages and so on.
3. Although you can control Word over OLE, 1 and 2 above still apply.
4. If you still want to use Word in your server, then on your own head be it.

Unwanted deleting from server - is this a bug?

I converted to Apple Mail from Eudora with 10.4 and I'm very frustrated with how it's handling my POP server. I have the options set to "delete mail when moved from inbox" which is a great setting. Only problem is, it has a mind of it's own! If I leave the mail in my inbox, sometimes it deletes from the server and sometimes it doesn't. I check mail every 15 min so that is not the problem. There is no way to know from Mail whether it has been deleted like there is in Eudora and this is a seriously missing feature for people who manage email in multiple places.
So is this a bug? Has anyone had this consistently work for them? I never had a problem with Eudora and I'm tempted to go back.
BTW, 10.4.6 with latest version of Mail

I was wondering if I was the only one having problems with this. Obviously not. This problem only started occuring recently, perhaps 4-12 months ago. Previously it was very reliable in removing mail from the server when the settings were to remove, and leaving those emails not moved from the Inbox.
But lately it has a mind of its own as one person said. You cannot count on it either leaving email on the server (if not moved from the inbox) or removing it if moved. Completely inconsistent.
One thing has also surfaced with the latest versions of Mail -- if you are getting mail while traveling using hotel's wireless, DSL, cable, etc. connections, very often it will not delete mail from the server even though you have it set to remove immediately.
Again, this was never a problem back a few months ago. It has just cropped up sometime over the last few months.
It sure does need fixing because I have lost valuable emails and I have also ended up with a clogged server from tons of spam never deleted.

Intersect bug with Smart Guides

The December updated didn't fix the intersect bug with Smart Guides. Previously it would snap to the intersection of paths and show you the intersect point. With CC it does nothing. Just passes straight over. Would you please fix this. Having to use AI CS5 just so I can work on the maps I need to produce. Thanks.
Anyone know how a work around/fix to this until we get it fixed by the AI guys?

Never mind... a little more digging and found the solution in this thread:
Add anchor point tool not snapping to intersection point

When trying to edit a photo, it disappears (black screen) or screen is full of lines. Is this a bug with the latest software update?

After updating with the latest software, when trying to edit a photo, it disappears (black screen) or screen is full of lines. If I blindly crop or edit the photo, when I exit edit mode, those changes have been made, but obviously this is unacceptable. Is this a bug with the latest software update?

There are several possible causes for the Black Screen issue
1. Permissions in the Library: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair permissions.
2. Minor Database corruption: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
3. A Damaged Photo: Select one of the affected photos in the iPhoto Window and right click on it. From the resulting menu select 'Show File (or 'Show Original File' if that's available). (On iPhoto 11 this option is under the File -> Reveal in Finder.) Will the file open in Preview? If not then the file is damaged. Time to restore from your back up.
4. A corrupted iPhoto Cache: Trash the com.apple.iPhoto folder from HD/Users/Your Name/ Library/ Caches...
5. A corrupted preference file: Trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
If none of these help: As a Test:
Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?

Suddenly cannot place image or resize file without losing resolution quality. Is this a bug?

I have CS3 and have been using Photoshop for several years. Today I randomly encountered a problem I have never had before.
I created a new file, 468 x 60 pixels with a resolution of 200. I then placed a file of a 4.95MB photo in this file. The size of the photo is quite large (resolution also 200) and I should have had to resize it way down to fit in small 468 x 60 space I had.
Instead, it placed the photo as a much smaller image, almost like a thumbnail of the original. When I went to resize the photo to make it larger, the resolution was terrible.
So then I went to the original file of the photo, copied it, went back to the 468 x 60 file and pasted it. It pasted it as the true size, but when I decreased the size, the resolution went bad. How does that even make sense?
So then I went back to the original file of the photo again and resized it down from there. The resolution went downhill again!
I have tried this with multiple other photos and file sizes and dimensions. I cannot place any large photo file and keep its accurate dimensions/resolutions. I also cannot resize any photo down without losing pixel quality.
The only thing weird that showed up right at the beginning of this whole process was that the pixel aspect ratio window kept popping up even before I'd open a file (it has been set to square).
I have reset all PS preferences through ctrl-alt-shift. I have gone through the Adobe update process. I have done disk clean-up and cleared off nearly 10GB of room on my hard drive. I have restarted over and over. I have also tried this process in Illustrator and had no problems.
Is this a bug? A memory problem? Never have I run into this issue before and I feel like I'm going crazy!

You could make the top layer active and then Cmd-Shift-Option-E
(stamp visible).
Do the trim and crop and then delete the top layer afterwords.
MTSTUNER

Bug in Crop tool with Olympus E-M5 raw files (ORF)

There is a bug in the crop tool with Olympus OM-D E-M5 RAW files (ORF) that is still not fixed with the recent update. Here is how to reproduce the problem.
I setup my E-M5 camera picture aspect ratio to 3:2 (instead of the sensor 4:3) and file format to RAW.
I take a picture.
I import the picture in Lightroom. The first thumbnail I see is the full sensor, then Lightroom computes a new thumbnail and correctly display the 3:2 crop factor.
I select the picture in the library and press [R] to bring the Crop tool.
BUG: The Crop tool does not let me recover the full 4:3 sensor image and is locked to the 3:2 crop factor.
Can this be fixed? Thanks

Are you sure you mean Photoshop version 6 the is a very old version of Photoshop before ACR existed. ACR first became available as a extra cost plug-in for Photoshop version 7. ACR started to be shipped with Photoshop with Photoshop CS. Each version since Photoshop CS has a newer version of ACR which is not compatible with older versions of Photoshop. So
CS ACR version is 2.4
CS2 ACR version 3.7
CS3 ACR version 4.6
CS4 ACR version 5.7
CS5 ACR version 6.7
CS6 and CC ACR version 8.4 however the new features in ACR 8.4 for CC are crippled in CS6. CS6 just get the new Camera support.
http://www.adobe.com/support/downloads/product.jsp?product=39&platform=Windows
If you have CS6 use menu help>Updates it should find the ACR 8.4 for CS6 and update your installation. If it does not you can down load it and the DNG converter. However don't convert to DNG just use your OFR RAW files.
http://blogs.adobe.com/lightroomjournal/2014/04/camera-raw-8-4-and-dng-converter-8-4-now-a vailable.html
If you do mean Photoshop version 6 you need to see if Olympus has a RAW converter for Photoshop version 6 for your camera.

Canon 60D RAW Photo Granulation in LR3 normal? Or is this a BUG?

Hello, in most Photos from Canon 60D RAW is the Photo Granulation very high in LR3.
Is this normal or is this a bug?
This photo grain occurs immediately after the load on the RAW file without any aftertreatment.
It looks as if the LR3 sharpens automatically.

The noise granularity is normal when working with RAW files because this is how the data comes off the sensor.
It can help to change your LR defaults to use a sharpen mask that is quite high. I use 75. The higher the sharpen mask the more distinct the edge needs to be before the capture-sharpening is applied. Hold down the Alt-key while you adjust the Mask slider to see what is being sharpened and make it high enough that the general areas are not sharpened, only the edges.
For lower ISOs, this noise isn't necessarily a big problem for ink-jet printing that already consists of little dots, and actually helps the export sharpening have something to bite on if you are resizing significantly smaller, but it can be a problem is you are cropping down instead of resizing and displaying images close to full-resolution. In this case you'll want to adjust the Luminance slider up a bit more than normal. Don't go overboard with it, though.
Having worked with RAW files for many years, I actually prefer my images to be a little grainy and don't like in-camera JPGs where things are smoothed out too much.

Pages 5.5.1: When opening a document created with Pages '09 (Version 4.0) with Pages 5.5.1 the page header and the page footer are deleted. How can this be prevented? Or is this a bug in Pages 5.5.1?

Pages 5.5.1: When opening a document created with Pages '09 (Version 4.0) with Pages 5.5.1 the page header and the page footer are deleted. How can this be prevented? Or is this a bug in Pages 5.5.1?

Same problem here (no graphics in header or footer) and the problem has been reported months ago. It is another bug/feature lost when Apple moves from 09 to the iCloud-compatible versions. Complain to Apple, you may have better chance than me and they may finally listen to their users....

Iphone 6 tells me that "Item not available" in my country UK, when i click on the itunes store icon for the app to open the music, movies or tv shows section of the app. is this a bug?

I am based in the UK and have just got a new iphone 6, everything works well except when i try to turn on the itunes store app - i can do a search and buy music etc that way, within the app, however, if i go to Music, Movies or the TV shows section within the Store app, i get a message come up saying "Item Not Available" - This item you've requested is not currently available in the UK Store, but it is available in the US store. Tap Change Store to view this item". I therefore cannot browse the music, movies or tv shows sections at all, nothing shows up except that message. All my previous itunes purchases have downloaded ok, and i can access them. My apple ID works fine and restrictions on the iphone are turned OFF. The App Store app works normally. Connection etc is all fine and I can access itunes in the normal way on my ipad and laptop, so this is just an iphone problem. Any ideas? is this a bug? I cant find anyone else with exactly the same problem. By the way, the same message comes up when i click on the red Music icon, on the iphone (situated next to the Safari icon) and then go to the "Store" via that app. my playlists are in tact, but as soon as i click that Store button, I am told that the Item is unavailable - not that i have chosen any Item lol, I just want to access the store in the normal way. Thank you in advance for any suggestions you can give

It is working now. I no longer get the message about the item not being available in the US and I can access the store.

Open Cursor Issue because of file browse Item - Is this a Bug in APEX 3.2

Hi All,
I am using file browse Item to upload file into the database at two places in my application, but it seems whenever I am submitting those two pages, with file path or without file path, its opening an cursor which remains open after that, because of this open cursor count in the application is getting exceeding every time.
For testing this I have made an dummy page containing just file browse item and submit button, and still it is increasing the open cursor count.
Is this a bug in Apex file browse item or there is some other way to handle this.
Please kindly help me in the above issue as this is affecting the production application.
Thanks & Regards
Sanjay
Edited by: user11204334 on Dec 5, 2010 9:57 PM
Edited by: user11204334 on Dec 5, 2010 9:58 PM

Hi,
One observation, Apex is switching the Session ID after one got killed ? I was working on Apex page with browse Item to test open cursor count,
after killing the SID (227) on which the open cursor count was getting increase, it APEX automatically switches to new SID(149) for that session.
Now the problem is even if I have two SID's and one hits the maximum open cursor count, It is not switching to other SID instead the whole application becomes unavailable.
STATNAME SID VALUE USER
opened cursors current 20 14 APEX_PUBLIC_USER
opened cursors current 149 74 APEX_PUBLIC_USER
opened cursors current 194 71 APEX_PUBLIC_USER
opened cursors current 211 5 APEX_PUBLIC_USER
opened cursors current 227 325 APEX_PUBLIC_USER Killed
opened cursors current 244 15 APEX_PUBLIC_USER
opened cursors current 20 14 APEX_PUBLIC_USER
opened cursors current 149 76 APEX_PUBLIC_USER
opened cursors current 194 71 APEX_PUBLIC_USER
opened cursors current 211 5 APEX_PUBLIC_USER
opened cursors current 244 15 APEX_PUBLIC_USER
Please kindly help in this.
Thanks in Advance
Thanks & Regards
Sanjay
Edited by: user11204334 on Dec 8, 2010 1:02 AM

Is this a bug with BoEdge3.1?

Can anyone help me on the issue which my customer is facing for BoEdge3.1
Concerning Error Message: You do not have enough Named User Licenses to make this user a named user. You have 55 Named User Licenses. (FWB 00013)
This is the error message she was receiving when trying to change an
existing user from Concurrent to Named under the Connection Type on the
Properties panel.
The current workaround was to delete the existing Concurrent user, then re-add the same user as Named.
She have been going through this process of deleting existing users, and then
re-adding them as Named and it was working okay. Then, it stopped
working and she started getting the same FWB 00013 error message again.
She was not able to create any Named users now. Basically, the workaround
worked for a while - then stopped working.
She currently has a total of 88 users. 21 of them are named. 67 of them
are Concurrent. She is licensed for 55 Named.
Once again, the system thinks she has 55 users marked as Named. But
there are only 21 marked as Named.
She did notice that as she was going through all of her existing list of
users, in alphabetical order, she was opening the Properties tab and
checking the Named/Concurrent status - as she got to the 55th user in the
list that is when she started getting the error message again.
Is this a bug with BoEdge3.1?
And I got an ADAPT01194692.
I am not sure that Is the ADAPT related to this issue.
Please help me its very critical.

Hi Salena,
If you are an SAP Employee, request you to post this question at
https://cw.sdn.sap.com/community/bobjtc
Cheers,
Subhodeep

JDev 9.0.3, Business comp wizard, is this a bug?

Howdy,
Found something that perhaps is a bug, hoping you guys have fixed for the real release.
1) Create a database connection, but don't fill in username/password. Don't check deploy password.
2) Create new workspace and project.
3) create new business component package in the project. On step 2, point Connection name to username/password-less connection. Alert says prompt will ask for credentials. No matter what I put in, with valid username/password entries, a Connect Error pops saying invalid arguments in call. Exception: oracle.jdeveloper.cm.CMException.
Is this a bug? We're using dynamic credentials in our app with data sources, so username/password is left off.
Thanks,
Joe Tseng
Technical Management Consultant
TUSC
[email protected]

Joe,
I've filed Bug#2561459 to track this problem.

Cannot see my picture stream on iPad with IOS 8.1.3. Pics from iPad are uploaded and visible on picture stream on iPhone 4, IOS 7. Is this a bug?

I cannot see my picture stream on iPad with IOS 8.1.3. The pictures from iPad are uploaded and visible on picture stream on iPhone 4, IOS 7. Is this a bug with IOS 8.1.3?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
iOS: Troubleshooting Messages
iOS: Troubleshooting FaceTime
- Sign out and then sign back into Messages and FT. Note you will lose all messages presently on the iPod
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.

Is this a bug in cropping guide?

Similar Messages

Maybe you are looking for