Is this offer a fake or why cannot change my abo?

Is this offer a fake or why cannot change my abo?

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Forgot passcode or device disabled
If recovery mode does not work try DFU mode.                        
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
For how to restore:                                                             
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes       
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:                         
Downloading past purchases from the App Store, iBookstore, and iTunes Store        
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

Similar Messages

  • [Sony Doesn't care this at all] WiFi Status locked, cannot change or turn off

    It looks like this is a general problem after ICS upgrade for Sony Xperia phone.I didn't have this problem before even in worse firmware 6.1.1.B.1.10, but after using 6.1.1.B.1.54 two weeks, I have the problem now... I can connect to AP after boot.After use for a little time, the process "wpa_supplicant" start running, and never stop, just like the screenshot below (right-top corner). When the process "wpa_supplicant" is running, I can neither turn off the WiFi, nor make any setting change about WiFi.What I can do is reboot.It looks that the WiFi status was been locked by this process. According the information on the web (reference), this issue can be fixed after delete the file /data/misc/wifi/wpa_supplicant_bagscan.db. (rooted required)But this file will automatic generated by wpa_supplicant, so the same problem may happens again. Is there any way to fix this issue without rooted?

    Please pay attention to these problems:http://talk.sonymobile.com/thread/55321http://talk.sonymobile.com/message/350786#350786http://talk.sonymobile.com/message/350738#350738http://talk.sonymobile.com/message/223550#223550(there may be more posts)They all refer to the same issue!! Still with NO solution. And is being given little attention by SONY!<<< Wi-fi won't turn off and stops working even though it's "on" >>>

  • The app store on my brand new ipod touch offers me majority apps that cannot be used on my software. how do i find apps that will work with 6.1.5? this is frustrating, especially when purchased brand new.

    the app store on my brand new ipod touch offers me majority apps that cannot be used on my software. how do i find apps that will work with 6.1.5? this is frustrating, especially when purchased brand new for christmas.

    See the following to purchase earlier, compatible version for iOS 6
    App Store: Downloading Older Versions of Apps on iOS - Apple Club

  • Why do I constantly receive a pop up telling me "this URL is not valid and cannot be loaded?"

    Why do I constantly receive a pop up telling me "this URL is not valid and cannot be loaded?" How can I stop this pop up?????? HELP!!!!!
    == This happened ==
    Every time Firefox opened
    == A week ago.

    Do you have the Google Toolbar installed? If so, go to '''Tools > Add-ons''' > Extensions''' Select the Google Toolbar, click '''Disable__ then restart Firefox.

  • I've been getting this message all day long, WHY? "Oops! This link appears broken. DNS error occurred. Server cannot be found.

    I've been getting this message all day long, WHY?
    "Oops! This link appears broken.
    DNS error occurred. Server cannot be found.

    I've been getting this message all day long, WHY?
    "Oops! This link appears broken.
    DNS error occurred. Server cannot be found.

  • I cannot install apps that are upgraded to ios4.. im using iphone 2g 3.1.3 this makes me sad.. why does apple need to updates many apps when we cannot update an iphone 2g anymore..

    i cannot install apps that are upgraded to ios4. im using iphone 2g 3.1.3 this makes me sad.. why does apple need to updates many apps when we cannot update an iphone 2g anymore..

    I am having the exact same problem with trying to sync my iPad with my computer. To make a long story short, I had to reinstall Windows for my computer and therefore had to reinstall itunes.
    I have done back ups in the past for my ipod touch and other ipods with no problems, but unfortunately I have never been able to back up my iPad. During a sync, the iPad would always disconnect from my computer and it would never finish. it would say the connection was lost, but nothing is wrong with the connection.
    So now I have over 100 apps and thousands of pictures that I am afraid will be deleted if I run the sync in itunes. I have tried to transfer purchases and it goes through the list of apps, but nothing is ever transferred.
    Any help would be appreciated. I am not interested in jailbreaking my iPad to solve this problem. There should be a fix for this and I want to upgrade to ios 4.3 as the original poster. Please help

  • Why cannot get the LR app in Adobe creative cloud? Now LR is a trial on my laptop and I am paying every month for CC. I am desperate, becaus I didn't get the solution. Also LR mobile I cannot intall it anymore.

    I hope I get the solution now after trying days and days  I am a member of CC and I pay every month. So why there is not a good helpdesk to communicate with.

    Thans alle. I will try this Tomorrowland
    Verstuurd vanaf mijn iPhone
    Op 10 mei 2014 om 19:10 heeft Simon G E Garrett <[email protected]> het volgende geschreven:
    Why cannot get the LR app in Adobe creative cloud? Now LR is a trial on my laptop and I am paying every month for CC. I am desperate, becaus I didn't get the solution. Also LR mobile I cannot intall it anymore.
    created by Simon G E Garrett in Photoshop Lightroom - View the full discussion
    Try this:
    Go to http://prodesigntools.com/adobe-cc-direct-download-links.html and download and install LR5.4 from there.
    You MUST follow the instruction under the heading "Note: Very Important Instructions".
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6371505#6371505
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Photoshop Lightroom by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • I don't know why cannot purchase the Apps from my ID

    I don't know why cannot purchase the Apps from my ID
    <Email Edited By Host>

    It's difficult offer further advice when all you say is "can't". If you provide full details as ot the problem, inlcuding any error messages you may be getting, someone may be able to offer additional suggestions.
    Regards.

  • Why cannot I use hidden or display only item to store value for insert?

    hi, Gurus:
    I have a question:
    I implemented a form with report region in a page, the update works OK, but the add function has a problem:
    There is a column, offender_ID, which is a foreign key for another table, it should not be null during insert. However, even I pass the offender ID from master page when user click the create button, and it did shows in the form, it must be a text filed to insert successfully, why cannot I use hidden or display only item to store this value for insert? (If I use hidden or display only item, insert won't be successful, apex reports I tried to insert a null value to offender_ID column.)
    Many Thanks in advance.
    Sam

    Hi,
    There is a column, offender_ID, which is a foreign key for another table, it should not be null during insert. However, even I pass the offender ID from master page when user click the create button, and it did shows in the form, it must be a text filed to insert successfully, why cannot I use hidden or display only item to store this value for insert? (If I use hidden or display only item, insert won't be successful, apex reports I tried to insert a null value to offender_ID column.)I think both hidden and display items have attributes that can cause problems because of different ways these items function than non-hidden and non-display-only items function. Display Only items have a "Setting" of "Save Session State" Yes/No? That can be a problem.
    Would you do this? Make these items regular items instead and see if you can get those working. Then, we will try to change the fields back to hidden or display only.
    Howard
    Congratulations. Glad you found the solution.
    Edited by: Howard (... in Training) on Apr 11, 2013 10:26 AM

  • Azure Storage Blob error - AnonymousClientOtherError and AnonymousNetworkError (why cannot see images)

    I have an mobile app and I put images in Azure Storage Blob. when tested by several of our own people (on test and beta), it is all good.
    But when we released it to beta and had hundreds (maybe above one thousand) of users to use, lots of them report that they cannot see images. It happens on their iPhones and also on many different brands of Android phones. Sometimes, for the same image,
    on one phone it is good, but on another it doesn't show.
    When I check blob log, I saw a lot of errors, mainly these two:
    AnonymousClientOtherError; 304
    "Anonymous request that failed as expected, most commonly a request that failed a specified precondition. The total number of anonymous requests that failed precondition checks (like If- Modified etc.) for GET requests. Examples: Conditional GET requests
    that fail the check."  (From Microsoft)
    AnonymousNetworkError; 200
    "The most common cause of this error is a client disconnecting before a timeout expires in the storage service. You should investigate the code in your client to understand why and when the client disconnects from the storage service. You can also use
    Wireshark, Microsoft Message Analyzer, or Tcping to investigate network connectivity issues from the client. " (From Microsoft) - a question here, this is an error, but why it is 200?
    I wonder if these are the reasons that caused my problem?
    For the first one, from my understanding, it is not actually an error, it just says that the version client cached is the same as server version. But when my client side sees this response, it thinks it is an error and throw an exception and thus no image
    is shown? (I actually outsourced my client side, so I can only guess). I later tested with my browser to access these images and found that if I refresh the browser with the same URL of the image, I saw error 304 on the log but I still see the image. So I
    guess this is not actually a reason for my problem.
    For the second one, is it because my client side's timeout is shorter than the server side's timeout? But is the timeout a connection timeout or a socket timeout? what are the default values on client side and on Azure Blob? Or is it because the network
    is not good? My Azure server is located in East Asia (Hongkong), but my users are in mainland China. I wonder if that could cause problem? But when a few users tested in China it is all good.
    Many of the images are actually very small,  just one to two hundred k. Some are just 11k.
    I cannot figure out what is the reason...

    Hi,
    Does any people encounter this error when they access the small picture, if this issue is only caused by large picture, please try to improve the timeout, you can also monitor your storage account from the Azure Management Portal, this may be help us
    to find out the detailed error information. see more at:
    http://azure.microsoft.com/en-gb/documentation/articles/storage-monitor-storage-account/, hope it helps.
    Regards

  • Why cannot I distribute forms in Adobe Acrobat 8 Professional (when following directions)?

    Why cannot I distribute forms in Adobe Acrobat 8 Professional (when following directions)?

    Hello,
    When you try to open Adobe Acrobat 8 Professional, the application returns the error "Adobe Acrobat 8 Professional cannot be launched at this time. You must launch at least one other suite component (such as Adobe Photoshop) before launching Acrobat 8 Professional."
    Please try to do one of the following solutions:
    * Open another Creative Suite 3 application first.
    *Open any other Creative Suite 3 application and follow the on-screen instructions to enter a serial number and activate your software. Then open Acrobat 8 Professional.
    But if you have MAC OS - Move the Acrobat, Adobe PCD, and Adobe PDF folders.
    Quit any Adobe applications that are open.
    In the Finder, navigate to /Library/Application Support/Adobe.
    Note: This folder path refers to the Library folder at the root level of the startup disk, not the Library folder that is inside a user's Home folder.
    Move the following folders to your Documents folder or another safe location:
    Acrobat
    Adobe PCD
    Adobe PDF
         Important: Do not delete these folders.
      4.  Open Acrobat 8 Professional.
      5.  Enter your serial number when prompted.
    Hope this one could help.

  • Why cannot I take unflipped selfie picture using front camera in IOS 8?

    Why cannot I take unflipped selfie picture using front camera in IOS 8? In IOS 7, I can do that.

    I misunderstood your question. By load I thought you meant from the time you take the picture to how long it takes to appear in Photos.. I have no problems with a delay when I want to view photos already in the photos app. If this makes any difference I'm using the new iCloud photo Library but still keep full copies of the photos on the device.

  • When I try to share my iMovie video on to Youtube, an alert appears saying that my Youtube username and password are incorrect. I have shared successfully before so I don't understand why cannot do so now.

    When I try to share my iMovie video on to Youtube, an alert appears saying that my Youtube username and password are incorrect. I have shared successfully before so I don't understand why cannot do so now.

    Hey.
    Since you seem to have tried mostly everything, apart from exchanging the motherboard, I'd say you have at least one option left, and that's to reinstall Windows from the recovery partition / recovery discs. That might solve the problem, if this is due to a software-error. General updates etc. might not work to fix such problems, but a clean install should.
    If that doesn't help, I'd say the problem is somewhere either with the CPU or the motherboard, maybe bad connections or some sort of malfunction that prevents the computer from coming out of the 100% CPU usage.
    IT-technician, running my own company in Bergen, Norway
    Thinkpad T61, 8895CTO C2D 2Ghz/4GB/120GB SSD/1400x1050

  • Why cannot start the runInstaller on the OEL4.6 OS?

    When I install the Oracle10g-10.2.0, it show the follow messages.
    X11TransSocketINETConnect() can't get address for localhost:6000: Temporary failure in name resolution
    Exception in thread "main" java.lang.InternalError: Can't connect to X11 window server using 'local_host:0.0' as the value of the DISPLAY variable.
    at sun.awt.X11GraphicsEnvironment.initDisplay(Native Method)
    at sun.awt.X11GraphicsEnvironment.<clinit>(Unknown Source)
    at java.lang.Class.forName0(Native Method)
    at java.lang.Class.forName(Unknown Source)
    at java.awt.GraphicsEnvironment.getLocalGraphicsEnvironment(Unknown Source)
    at java.awt.Window.init(Unknown Source)
    at java.awt.Window.<init>(Unknown Source)
    at java.awt.Frame.<init>(Unknown Source)
    at oracle.ewt.popup.PopupFrame.<init>(Unknown Source)
    at oracle.ewt.lwAWT.BufferedFrame.<init>(Unknown Source)
    at oracle.sysman.oio.oioc.OiocOneClickInstaller.<init>(OiocOneClickInstaller.java:378)
    at oracle.sysman.oio.oioc.OiocOneClickInstaller.main(OiocOneClickInstaller.java:2091)
    Why cannot start the runInstaller on the OEL4.6 OS?

    This is your problem.
    Exception in thread "main" java.lang.InternalError:
    Can't connect to X11 window server using 'local_host:0.0' as the value of the DISPLAY variable.
    The installer can not connect to a display device. Fix the DISPLAY variable and it'll work, or at least get ot the next step. (How to fix ... this is one for Google.)
    Edit: Make sure you have the version of openmotif specified in the install manual, not just the default one included with the OS.

  • Why cannot I open "RWL" RAW files on Photoshop CS5?

    Why cannot I open "RWL" RAW files on Photoshop CS5?

    I think you'd be much better off posting your question in the Photoshop forum,
    http://forums.adobe.com/community/photoshop
    This is the Reader one...

Maybe you are looking for