Is this table considered to be large? Plz help
Hello,
I have a table that contains about 140 million rows. data size is about 38 GB. This is severly affecting performance of our application. Since this is one of the tables that stores "detail log of transactions", it keeps growing with every min and sec.
are there any suggestions/comments to keep the size low? (e.g. by segregating columns that contain more than 1000 char of data)
looking forward for your valuable advise.
TIA
Thanks for your inputs.
Well, the procedure to insert data into this table
takes a loong time and consume lot of resources. we
have used insert .....select from with append hint,
as there is very little data processing.Now we are getting somewhere ... 'The PROCEDURE is slow and uses a lot of resources' is somewhat more definitive than 'the large table is affecting our performance'. (Of course, we still do not know whether 'procedure' means a PL/SQ stored procedure or simply the sequence that you happen to be using.)
You need to give us symptoms. Operating system & database version and patches, disk storage information (SAN, RAID level) is useful.
What specific steps have you taken to identify the cause of slowness? Any trace, profile, explain plan?
What level of complexity is involved in inserting into the table? Are you doing any joins in the select portion? How many indexes are there? What is the base table structure? (IOT, many wide columns, blob/clob?) How many records are being selected with each insert? Are you using bitmaps? Have you checked for any locks?
Is only the procedure affected, or is everything affected while the procedure is running.
So far it is as if you have gone to the doctor and said you are not feeling well.
To get a prescription from the doctor, It is useful to know whether the bad feeling is in the back, the head, the neck, the stomach .... the more you tell us, the sooner we can make recommendations. Until we get enough details, all we can do is guess and keep asking for more detail.
Similar Messages
-
TS2326 my ios is 5.1.1 but still im facing to this issue, this is very annoying... plz help me
my ios is 5.1.1 but still im facing to this issue, this is very annoying... plz help me
You need to tell us what "this issue" is if you want help.
-
REG: How to add elements onto htmlb table cell.. URGENT PLZ HELP
Hi all,
I have created a htmlb table. And the jsp code is as follows
<%@ taglib uri="tagLib" prefix="hbj" %>
<jsp:useBean id="myBean" scope="application" class="com.linde.myaccounts.util.TableBean" />
<hbj:content id="myContext">
<hbj:page title="PageTitle">
<hbj:form id="myFormId" >
<hbj:tableView id="myTableView1"
model="myBean.model"
design="ALTERNATING"
headerVisible="false"
footerVisible="false"
fillUpEmptyRows="true"
visibleFirstRow="1"
visibleRowCount="5"
</hbj:form>
</hbj:page>
</hbj:content>
width="500 px" >
</hbj:tableView>
I have used a table bean by which I am getting the column header names. I have 5 columns, I have to add input field in the first column, checkbox in the second column, leave the third column blank, checkbox in the fourth column and again a input field in the fifth column. I am not understanding on how to add this elements onto the table. Will I add it from the JSP using <hbj:tableViewColumns> tag or I have add them in the bean or in the dynpage. Kindly someone give me the code for this...
This is very urgent..Kindly help...
Thanks in advance,
PriyankaHi,
Have you tried looking at the examples that come with the PDK for all of the HTMLB elements? From memory, there should be a small table example or 2 that have different types of columns shown similar to what you want - they have the full source code with them for you to look at.
If you are working in a portal, go to the Java Developer tab and I "think" there should be a tab linking to HTMLB documentation and examples - sorry I can't be more specific but I don't have access to a portal at the moment so am trying to remember.
Gareth. -
I dont know how to insert file field into insert record in DW. i also want to know, insert dynamic table with image field. Plz help me anyone. Ty..
ohh kk thank you bro. But How to store photos to server file. I wanna upload and display the photos in webpage. Can you send me the php code for this?
-
plz help me apple. im from viet nam, my english so bad, but today i have bought a ipad mini 2 with serial DL********CM5 from a thrief, he lie me and i give him all money i have, when i go home, i reset all setting, apple need ID, now, i cry so much, i know he lie me, this is all my money i have, plz, don't icloud my ipad, this is all my money apple, plz help me, i hope apple will help my money back, i hope, plz reply me plz
<Personal Information Edited by Host>Sorry but no one can help you with this. Contact the police.
-
Reg: Plz Help me.. Not Getting output
Hi all,
I created a rdf using oracle 10g report for below query
SELECT EMPNO,ENAME,DEPTNO,SAL,MGR FROM EMP
I Registered above created rdf in oracle apps with output format as xml
when i ran the report using concurrent request, i am getting below output.
<G_EMP>
* <EMPLOYEE>*
* <EMPNO>1</EMPNO>*
* <ENAME>ALEX</ENAME>*
* </EMPLOYEE>*
* <EMPLOYEE>*
* <EMPNO>2</EMPNO>*
* <ENAME>RAGHU</ENAME>*
* </EMPLOYEE>*
<EMPLOYEE>
* <EMPNO>3</EMPNO>*
* <ENAME>GURU</ENAME>*
* </EMPLOYEE>*
* </G_EMP>*
NOTE:
I am not getting for rest of column in above query (ie. DEPTNO,SAL,MGR) but when i ran that rdf in oracle 10g report all column in above query are displaying..
How to resolve this. Its urgent .. Plz help me.Hi,
Please refer to this thread and see if it helps.
XML report disply XML code instead of report out put
XML report disply XML code instead of report out put.
Regards,
Hussein -
Warning messages This size of the table appears to be large
I am getting below warning with search results. this warning appears on the top of the page then followed by results.
the resuls table has no.records displayed to 25 already. I dont know how to get rid of this warning from the Page. Can some one help?
This size of the table appears to be large. Verify if the table belonging to this View Object (SOResultVO1) really needs to have a table size of 25. The Application's standard is 25.
This size of the table appears to be large. Verify if the table belonging to this View Object (SOResultVO1) really needs to have a table size of 25. The Application's standard is 25.
This size of the table appears to be large. Verify if the table belonging to this View Object (SOResultVO1) really needs to have a table size of 25. The Application's standard is 25.
This size of the table appears to be large. Verify if the table belonging to this View Object (SOResultVO1) really needs to have a table size of 25. The Application's standard is 25.
This size of the table appears to be large. Verify if the table belonging to this View Object (SOResultVO1) really needs to have a table size of 25. The Application's standard is 25.
This size of the table appears to be large. Verify if the table belonging to this View Object (SOResultVO1) really needs to have a table size of 25. The Application's standard is 25.
This size of the table appears to be large. Verify if the table belonging to this View Object (SOResultVO1) really needs to have a table size of 25. The Application's standard is 25.
This size of the table appears to be large. Verify if the table belonging to this View Object (SOResultVO1) really needs to have a table size of 25. The Application's standard is 25.
This size of the table appears to be large. Verify if the table belonging to this View Object (SOResultVO1) really needs to have a table size of 25. The Application's standard is 25.
This size of the table appears to be large. Verify if the table belonging to this View Object (SOResultVO1) really needs to have a table size of 25. The Application's standard is 25.
This size of the table appears to be large. Verify if the table belonging to this View Object (SOResultVO1) really needs to have a table size of 25. The Application's standard is 25.
This size of the table appears to be large. Verify if the table belonging to this View Object (SOResultVO1) really needs to have a table size of 25. The Application's standard is 25.
This size of the table appears to be large. Verify if the table belonging to this View Object (SOResultVO1) really needs to have a table size of 25. The Application's standard is 25.
This size of the table appears to be large. Verify if the table belonging to this View Object (SOResultVO1) really needs to have a table size of 25. The Application's standard is 25.
This size of the table appears to be large. Verify if the table belonging to this View Object (SOResultVO1) really needs to have a table size of 25. The Application's standard is 25.
This size of the table appears to be large. Verify if the table belonging to this View Object (SOResultVO1) really needs to have a table size of 25. The Application's standard is 25.
This size of the table appears to be large. Verify if the table belonging to this View Object (SOResultVO1) really needs to have a table size of 25. The Application's standard is 25.
This size of the table appears to be large. Verify if the table belonging to this View Object (SOResultVO1) really needs to have a table size of 25. The Application's standard is 25.
This size of the table appears to be large. Verify if the table belonging to this View Object (SOResultVO1) really needs to have a table size of 25. The Application's standard is 25.
This size of the table appears to be large. Verify if the table belonging to this View Object (SOResultVO1) really needs to have a table size of 25. The Application's standard is 25.
This size of the table appears to be large. Verify if the table belonging to this View Object (SOResultVO1) really needs to have a table size of 25. The Application's standard is 25.
This size of the table appears to be large. Verify if the table belonging to this View Object (SOResultVO1) really needs to have a table size of 25. The Application's standard is 25.
This size of the table appears to be large. Verify if the table belonging to this View Object (SOResultVO1) really needs to have a table size of 25. The Application's standard is 25.
This size of the table appears to be large. Verify if the table belonging to this View Object (SOResultVO1) really needs to have a table size of 25. The Application's standard is 25.
This size of the table appears to be large. Verify if the table belonging to this View Object (SOResultVO1) really needs to have a table size of 25. The Application's standard is 25.
This size of the table appears to be large. Verify if the table belonging to this View Object (SOResultVO1) really needs to have a table size of 25. The Application's standard is 25.
This size of the table appears to be large. Verify if the table belonging to this View Object (SOResultVO1) really needs to have a table size of 25. The Application's standard is 25.
This size of the table appears to be large. Verify if the table belonging to this View Object (SOResultVO1) really needs to have a table size of 25. The Application's standard is 25.
This size of the table appears to be large. Verify if the table belonging to this View Object (SOResultVO1) really needs to have a table size of 25. The Application's standard is 25.
This size of the table appears to be large. Verify if the table belonging to this View Object (SOResultVO1) really needs to have a table size of 25. The Application's standard is 25.Hi All,
Any solution on the above issue.
I am also getting the same issue, but it is a custom form.
Warning
This size of the table appears to be large. Verify if the table belonging to this View Object (xxUserDetailsVO1) really needs to have a table size of 50. The Application's standard is 25.
Thanks
Badsha -
Plz help me convert this into a table format
Hi,
private String makeInfo(Vector p_dataV)
String info = "";
if (p_dataV.size() > 0)
info += "<font size=1>";
for (int i=0; i<p_dataV.size(); i=i+2)
info += p_dataV.elementAt(i) + ": <b>" + p_dataV.elementAt(i+1) + "</b><br>";
info += "</font><br>";
return info;
I want values of p_dataV.elementAt(i) in one row &
values of p_dataV.elementAt(i+1) underneath the first row
Plz help ......
Regards,
VishalCome on dude, its pretty simple.
The following should work.
I've used Collection Interface rather than Vector (makes it more generic)
also used an iterator rather than a for loop.
And used a StringBuffer for building the data in the loop, rather than a String (more efficient). In Java1.5 you should probably use an enhanced for loop, and a StringBuilder.
I was also careful about the fact of bad data in the list. It won't break if you don't provide an odd number of elements.
private String makeInfo(Collection p_dataV)
String info = "";
StringBuffer topRow = new StringBuffer();
StringBuffer bottomRow = new StringBuffer();
for(Iterator it = p_dataV.iterator(); it.hasNext(); ){
topRow.append("<td>" + it.next() + "</td>");
if (it.hasNext()){
bottomRow.append("<td>" + it.next() + "</td>");
info = "<table><tr>";
info += topRow.toString();
info += "</tr><tr>";
info += bottomRow.toString();
info += "</tr></table>";
return info; -
Qurey running for last 18 Hours plz help in this regard
my server has 4 Gb Ram plz tell me something. what action should i take. This Query is running 18 hours plz by seeing this ADDM plz sugest what to do i'm highly thanksful to yoy
ADDM Report for Task 'ADDM:1196827189_1_679'
Analysis Period
AWR snapshot range from 678 to 679.
Time period starts at 25-NOV-08 09.01.03 AM
Time period ends at 25-NOV-08 09.53.05 AM
Analysis Target
Database 'ORCL' with DB ID 1196827189.
Database version 11.1.0.6.0.
ADDM performed an analysis of instance orcl, numbered 1 and hosted at SRV01.
Activity During the Analysis Period
Total database time was 7940 seconds.
The average number of active sessions was 2.54.
Summary of Findings
Description Active Sessions Recommendations
Percent of Activity
1 Virtual Memory Paging 2.54 | 100 1
2 Top SQL by DB Time 2.47 | 97.18 1
3 CPU Usage 2.47 | 97.09 1
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Findings and Recommendations
Finding 1: Virtual Memory Paging
Impact is 2.54 active sessions, 100% of total activity.
Significant virtual memory paging was detected on the host operating system.
Recommendation 1: Host Configuration
Estimated benefit is 2.54 active sessions, 100% of total activity.
Action
Host operating system was experiencing significant paging but no
particular root cause could be detected. Investigate processes that do
not belong to this instance running on the host that are consuming
significant amount of virtual memory. Also consider adding more physical
memory to the host.
Finding 2: Top SQL by DB Time
Impact is 2.47 active sessions, 97.18% of total activity.
SQL statements consuming significant database time were found.
Recommendation 1: SQL Tuning
Estimated benefit is 2.54 active sessions, 100% of total activity.
Action
Run SQL Tuning Advisor on the SQL statement with SQL_ID "9d65avvugb899".
Related Object
SQL statement with SQL_ID 9d65avvugb899 and PLAN_HASH 1187702671.
UPDATE GN_FLAT_IN_TABLE SET DG0_ID=(SELECT JAG_N24_DG0.DG0_ID FROM
JAG_N24_DG0 WHERE NVL ( JAG_N24_DG0.ITEM_DISC_AMT , -1033 ) = NVL (
GN_FLAT_IN_TABLE.ITEM_DISC_AMT , -1033 ) AND NVL (
JAG_N24_DG0.LINE_AMT , -1033 ) = NVL ( GN_FLAT_IN_TABLE.LINE_AMT ,
-1033 ) AND NVL ( JAG_N24_DG0.LINE_CODE , -1033 ) = NVL (
GN_FLAT_IN_TABLE.LINE_CODE , -1033 ) AND NVL ( JAG_N24_DG0.LINE_NAME
, -1033 ) = NVL ( GN_FLAT_IN_TABLE.LINE_NAME , -1033 ) AND NVL (
JAG_N24_DG0.LINE_INTERNAL_CODE , -1033 ) = NVL (
GN_FLAT_IN_TABLE.LINE_INTERNAL_CODE , -1033 ) AND NVL (
JAG_N24_DG0.LINE_REC_SEQ , -1033 ) = NVL (
GN_FLAT_IN_TABLE.LINE_REC_SEQ , -1033 ) AND NVL (
JAG_N24_DG0.PRIMARY_CARD , -1033 ) = NVL (
GN_FLAT_IN_TABLE.PRIMARY_CARD , -1033 ) AND NVL (
JAG_N24_DG0.TXN_CAT , -1033 ) = NVL ( GN_FLAT_IN_TABLE.TXN_CAT ,
-1033 ) AND NVL ( JAG_N24_DG0.TXN_DATE , ' 14-AUG-1947' ) = NVL (
GN_FLAT_IN_TABLE.TXN_DATE , ' 14-AUG-1947' ) AND NVL (
JAG_N24_DG0.TXN_TIME , ' 14-AUG-1947' ) = NVL (
GN_FLAT_IN_TABLE.TXN_TIME , ' 14-AUG-1947' ) AND NVL (
JAG_N24_DG0.TXN_ID , -1033 ) = NVL ( GN_FLAT_IN_TABLE.TXN_ID ,
-1033 ) AND NVL ( JAG_N24_DG0.TXN_DURATION , -1033 ) = NVL (
GN_FLAT_IN_TABLE.TXN_DURATION , -1033 ) AND NVL (
JAG_N24_DG0.TILL_LOCAL_CODE , -1033 ) = NVL (
GN_FLAT_IN_TABLE.TILL_LOCAL_CODE , -1033 ) AND NVL (
JAG_N24_DG0.STORE_CODE , -1033 ) = NVL ( GN_FLAT_IN_TABLE.STORE_CODE
, -1033 ) AND NVL ( JAG_N24_DG0.STORE_NAME , -1033 ) = NVL (
GN_FLAT_IN_TABLE.STORE_NAME , -1033 ) AND NVL (
JAG_N24_DG0.OPERATOR_CODE , -1033 ) = NVL (
GN_FLAT_IN_TABLE.OPERATOR_CODE , -1033 ) AND NVL (
JAG_N24_DG0.LINE_QTY , -1033 ) = NVL ( GN_FLAT_IN_TABLE.LINE_QTY ,
-1033 ) AND NVL ( JAG_N24_DG0.CUSTOMER_STAFF_REF , -1033 ) = NVL (
GN_FLAT_IN_TABLE.CUSTOMER_STAFF_REF , -1033 ) AND
NVL(GN_FLAT_IN_TABLE.OPERATIONAL_DATE, '14-AUG-1947'
)=NVL(JAG_N24_DG0.OPERATIONAL_DATE, '14-AUG-1947' ))
Action
Investigate the SQL statement with SQL_ID "9d65avvugb899" for possible
performance improvements.
Related Object
SQL statement with SQL_ID 9d65avvugb899 and PLAN_HASH 1187702671.
UPDATE GN_FLAT_IN_TABLE SET DG0_ID=(SELECT JAG_N24_DG0.DG0_ID FROM
JAG_N24_DG0 WHERE NVL ( JAG_N24_DG0.ITEM_DISC_AMT , -1033 ) = NVL (
GN_FLAT_IN_TABLE.ITEM_DISC_AMT , -1033 ) AND NVL (
JAG_N24_DG0.LINE_AMT , -1033 ) = NVL ( GN_FLAT_IN_TABLE.LINE_AMT ,
-1033 ) AND NVL ( JAG_N24_DG0.LINE_CODE , -1033 ) = NVL (
GN_FLAT_IN_TABLE.LINE_CODE , -1033 ) AND NVL ( JAG_N24_DG0.LINE_NAME
, -1033 ) = NVL ( GN_FLAT_IN_TABLE.LINE_NAME , -1033 ) AND NVL (
JAG_N24_DG0.LINE_INTERNAL_CODE , -1033 ) = NVL (
GN_FLAT_IN_TABLE.LINE_INTERNAL_CODE , -1033 ) AND NVL (
JAG_N24_DG0.LINE_REC_SEQ , -1033 ) = NVL (
GN_FLAT_IN_TABLE.LINE_REC_SEQ , -1033 ) AND NVL (
JAG_N24_DG0.PRIMARY_CARD , -1033 ) = NVL (
GN_FLAT_IN_TABLE.PRIMARY_CARD , -1033 ) AND NVL (
JAG_N24_DG0.TXN_CAT , -1033 ) = NVL ( GN_FLAT_IN_TABLE.TXN_CAT ,
-1033 ) AND NVL ( JAG_N24_DG0.TXN_DATE , ' 14-AUG-1947' ) = NVL (
GN_FLAT_IN_TABLE.TXN_DATE , ' 14-AUG-1947' ) AND NVL (
JAG_N24_DG0.TXN_TIME , ' 14-AUG-1947' ) = NVL (
GN_FLAT_IN_TABLE.TXN_TIME , ' 14-AUG-1947' ) AND NVL (
JAG_N24_DG0.TXN_ID , -1033 ) = NVL ( GN_FLAT_IN_TABLE.TXN_ID ,
-1033 ) AND NVL ( JAG_N24_DG0.TXN_DURATION , -1033 ) = NVL (
GN_FLAT_IN_TABLE.TXN_DURATION , -1033 ) AND NVL (
JAG_N24_DG0.TILL_LOCAL_CODE , -1033 ) = NVL (
GN_FLAT_IN_TABLE.TILL_LOCAL_CODE , -1033 ) AND NVL (
JAG_N24_DG0.STORE_CODE , -1033 ) = NVL ( GN_FLAT_IN_TABLE.STORE_CODE
, -1033 ) AND NVL ( JAG_N24_DG0.STORE_NAME , -1033 ) = NVL (
GN_FLAT_IN_TABLE.STORE_NAME , -1033 ) AND NVL (
JAG_N24_DG0.OPERATOR_CODE , -1033 ) = NVL (
GN_FLAT_IN_TABLE.OPERATOR_CODE , -1033 ) AND NVL (
JAG_N24_DG0.LINE_QTY , -1033 ) = NVL ( GN_FLAT_IN_TABLE.LINE_QTY ,
-1033 ) AND NVL ( JAG_N24_DG0.CUSTOMER_STAFF_REF , -1033 ) = NVL (
GN_FLAT_IN_TABLE.CUSTOMER_STAFF_REF , -1033 ) AND
NVL(GN_FLAT_IN_TABLE.OPERATIONAL_DATE, '14-AUG-1947'
)=NVL(JAG_N24_DG0.OPERATIONAL_DATE, '14-AUG-1947' ))
Finding 3: CPU Usage
Impact is 2.47 active sessions, 97.09% of total activity.
Time spent on the CPU by the instance was responsible for a substantial part
of database time.
Recommendation 1: SQL Tuning
Estimated benefit is 2.54 active sessions, 100% of total activity.
Action
Run SQL Tuning Advisor on the SQL statement with SQL_ID "9d65avvugb899".
Related Object
SQL statement with SQL_ID 9d65avvugb899 and PLAN_HASH 1187702671.
UPDATE GN_FLAT_IN_TABLE SET DG0_ID=(SELECT JAG_N24_DG0.DG0_ID FROM
JAG_N24_DG0 WHERE NVL ( JAG_N24_DG0.ITEM_DISC_AMT , -1033 ) = NVL (
GN_FLAT_IN_TABLE.ITEM_DISC_AMT , -1033 ) AND NVL (
JAG_N24_DG0.LINE_AMT , -1033 ) = NVL ( GN_FLAT_IN_TABLE.LINE_AMT ,
-1033 ) AND NVL ( JAG_N24_DG0.LINE_CODE , -1033 ) = NVL (
GN_FLAT_IN_TABLE.LINE_CODE , -1033 ) AND NVL ( JAG_N24_DG0.LINE_NAME
, -1033 ) = NVL ( GN_FLAT_IN_TABLE.LINE_NAME , -1033 ) AND NVL (
JAG_N24_DG0.LINE_INTERNAL_CODE , -1033 ) = NVL (
GN_FLAT_IN_TABLE.LINE_INTERNAL_CODE , -1033 ) AND NVL (
JAG_N24_DG0.LINE_REC_SEQ , -1033 ) = NVL (
GN_FLAT_IN_TABLE.LINE_REC_SEQ , -1033 ) AND NVL (
JAG_N24_DG0.PRIMARY_CARD , -1033 ) = NVL (
GN_FLAT_IN_TABLE.PRIMARY_CARD , -1033 ) AND NVL (
JAG_N24_DG0.TXN_CAT , -1033 ) = NVL ( GN_FLAT_IN_TABLE.TXN_CAT ,
-1033 ) AND NVL ( JAG_N24_DG0.TXN_DATE , ' 14-AUG-1947' ) = NVL (
GN_FLAT_IN_TABLE.TXN_DATE , ' 14-AUG-1947' ) AND NVL (
JAG_N24_DG0.TXN_TIME , ' 14-AUG-1947' ) = NVL (
GN_FLAT_IN_TABLE.TXN_TIME , ' 14-AUG-1947' ) AND NVL (
JAG_N24_DG0.TXN_ID , -1033 ) = NVL ( GN_FLAT_IN_TABLE.TXN_ID ,
-1033 ) AND NVL ( JAG_N24_DG0.TXN_DURATION , -1033 ) = NVL (
GN_FLAT_IN_TABLE.TXN_DURATION , -1033 ) AND NVL (
JAG_N24_DG0.TILL_LOCAL_CODE , -1033 ) = NVL (
GN_FLAT_IN_TABLE.TILL_LOCAL_CODE , -1033 ) AND NVL (
JAG_N24_DG0.STORE_CODE , -1033 ) = NVL ( GN_FLAT_IN_TABLE.STORE_CODE
, -1033 ) AND NVL ( JAG_N24_DG0.STORE_NAME , -1033 ) = NVL (
GN_FLAT_IN_TABLE.STORE_NAME , -1033 ) AND NVL (
JAG_N24_DG0.OPERATOR_CODE , -1033 ) = NVL (
GN_FLAT_IN_TABLE.OPERATOR_CODE , -1033 ) AND NVL (
JAG_N24_DG0.LINE_QTY , -1033 ) = NVL ( GN_FLAT_IN_TABLE.LINE_QTY ,
-1033 ) AND NVL ( JAG_N24_DG0.CUSTOMER_STAFF_REF , -1033 ) = NVL (
GN_FLAT_IN_TABLE.CUSTOMER_STAFF_REF , -1033 ) AND
NVL(GN_FLAT_IN_TABLE.OPERATIONAL_DATE, '14-AUG-1947'
)=NVL(JAG_N24_DG0.OPERATIONAL_DATE, '14-AUG-1947' ))
Action
Investigate the SQL statement with SQL_ID "9d65avvugb899" for possible
performance improvements.
Related Object
SQL statement with SQL_ID 9d65avvugb899 and PLAN_HASH 1187702671.
UPDATE GN_FLAT_IN_TABLE SET DG0_ID=(SELECT JAG_N24_DG0.DG0_ID FROM
JAG_N24_DG0 WHERE NVL ( JAG_N24_DG0.ITEM_DISC_AMT , -1033 ) = NVL (
GN_FLAT_IN_TABLE.ITEM_DISC_AMT , -1033 ) AND NVL (
JAG_N24_DG0.LINE_AMT , -1033 ) = NVL ( GN_FLAT_IN_TABLE.LINE_AMT ,
-1033 ) AND NVL ( JAG_N24_DG0.LINE_CODE , -1033 ) = NVL (
GN_FLAT_IN_TABLE.LINE_CODE , -1033 ) AND NVL ( JAG_N24_DG0.LINE_NAME
, -1033 ) = NVL ( GN_FLAT_IN_TABLE.LINE_NAME , -1033 ) AND NVL (
JAG_N24_DG0.LINE_INTERNAL_CODE , -1033 ) = NVL (
GN_FLAT_IN_TABLE.LINE_INTERNAL_CODE , -1033 ) AND NVL (
JAG_N24_DG0.LINE_REC_SEQ , -1033 ) = NVL (
GN_FLAT_IN_TABLE.LINE_REC_SEQ , -1033 ) AND NVL (
JAG_N24_DG0.PRIMARY_CARD , -1033 ) = NVL (
GN_FLAT_IN_TABLE.PRIMARY_CARD , -1033 ) AND NVL (
JAG_N24_DG0.TXN_CAT , -1033 ) = NVL ( GN_FLAT_IN_TABLE.TXN_CAT ,
-1033 ) AND NVL ( JAG_N24_DG0.TXN_DATE , ' 14-AUG-1947' ) = NVL (
GN_FLAT_IN_TABLE.TXN_DATE , ' 14-AUG-1947' ) AND NVL (
JAG_N24_DG0.TXN_TIME , ' 14-AUG-1947' ) = NVL (
GN_FLAT_IN_TABLE.TXN_TIME , ' 14-AUG-1947' ) AND NVL (
JAG_N24_DG0.TXN_ID , -1033 ) = NVL ( GN_FLAT_IN_TABLE.TXN_ID ,
-1033 ) AND NVL ( JAG_N24_DG0.TXN_DURATION , -1033 ) = NVL (
GN_FLAT_IN_TABLE.TXN_DURATION , -1033 ) AND NVL (
JAG_N24_DG0.TILL_LOCAL_CODE , -1033 ) = NVL (
GN_FLAT_IN_TABLE.TILL_LOCAL_CODE , -1033 ) AND NVL (
JAG_N24_DG0.STORE_CODE , -1033 ) = NVL ( GN_FLAT_IN_TABLE.STORE_CODE
, -1033 ) AND NVL ( JAG_N24_DG0.STORE_NAME , -1033 ) = NVL (
GN_FLAT_IN_TABLE.STORE_NAME , -1033 ) AND NVL (
JAG_N24_DG0.OPERATOR_CODE , -1033 ) = NVL (
GN_FLAT_IN_TABLE.OPERATOR_CODE , -1033 ) AND NVL (
JAG_N24_DG0.LINE_QTY , -1033 ) = NVL ( GN_FLAT_IN_TABLE.LINE_QTY ,
-1033 ) AND NVL ( JAG_N24_DG0.CUSTOMER_STAFF_REF , -1033 ) = NVL (
GN_FLAT_IN_TABLE.CUSTOMER_STAFF_REF , -1033 ) AND
NVL(GN_FLAT_IN_TABLE.OPERATIONAL_DATE, '14-AUG-1947'
)=NVL(JAG_N24_DG0.OPERATIONAL_DATE, '14-AUG-1947' ))
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Additional Information
Miscellaneous Information
Wait class "Application" was not consuming significant database time.
Wait class "Commit" was not consuming significant database time.
Wait class "Concurrency" was not consuming significant database time.
Wait class "Configuration" was not consuming significant database time.
Wait class "Network" was not consuming significant database time.
Wait class "User I/O" was not consuming significant database time.
Session connect and disconnect calls were not consuming significant database
time.
Hard parsing of SQL statements was not consuming significant database time.JACK DBA wrote:
my server has 4 Gb Ram plz tell me something. what action should i take. This Query is running 18 hours plz by seeing this ADDM plz sugest what to do i'm highly thanksful to yoy As already mentioned here in the thread you need to check the execution plan of the UPDATE statement. If you're unlucky then the scalar subquery querying JAG_N24_DG0 is potentially executed for each row of GN_FLAT_IN_TABLE. Depending on the execution plan of the subquery this approach might be quite inefficient.
Generic instructions how to generate a meaningful plan output and how to use the {noformat}{{noformat}code{noformat}}{noformat} tag to get it formatted in mono-space font here follow below:
Could you please post an properly formatted explain plan output using DBMS_XPLAN.DISPLAY including the "Predicate Information" section below the plan to provide more details regarding your statement. Please use the {noformat}[{noformat}code{noformat}]{noformat} tag before and {noformat}[{noformat}/code{noformat}]{noformat} tag after or the {noformat}{{noformat}code{noformat}}{noformat} tag before and after to enhance readability of the output provided:
In SQL*Plus:
SET LINESIZE 130
EXPLAIN PLAN FOR <your statement>;
SELECT * FROM TABLE(DBMS_XPLAN.DISPLAY);Note that the package DBMS_XPLAN.DISPLAY is only available from 9i on.
In 9i and above, if the "Predicate Information" section is missing from the DBMS_XPLAN.DISPLAY output but you get instead the message "Plan table is old version" then you need to re-create your plan table using the server side script "$ORACLE_HOME/rdbms/admin/utlxplan.sql".
In previous versions you could run the following in SQL*Plus (on the server) instead:
@?/rdbms/admin/utlxplsA different approach in SQL*Plus:
SET AUTOTRACE ON EXPLAIN
<run your statement>;will also show the execution plan.
In order to get a better understanding where your statement spends the time you might want to turn on SQL trace as described here:
When your query takes too long ...
and post the "tkprof" output here, too.
Regards,
Randolf
Oracle related stuff blog:
http://oracle-randolf.blogspot.com/
SQLTools++ for Oracle (Open source Oracle GUI for Windows):
http://www.sqltools-plusplus.org:7676/
http://sourceforge.net/projects/sqlt-pp/ -
Plz. help,table does not show value for one field
hi all,
i have a really strange problem , i have a string field in access database that contains the date and time value,this field for some strange reason does not show in my table created through html,
i tried all combination(arranging the fields) ,renaming it w/o help, it shows the value using out.println(but then why is it not showing me in the table???)
plz. help ASAP.
the code is as under
<HTML>
<HEAD><TITLE> LOGGED IN ok</TITLE> </HEAD>
<BODY bgcolor = "yellow">
<%@ page import = "java.sql.*" %>
<%! // declaring variables
String s = "";
java.sql.ResultSet rs=null,rs1=null,rs2=null;
java.sql.Connection con;
java.sql.Statement stmt,stmt1;
String empId = "",compid ="",calltype ="",probheader="",probdescription ="",probcomment ="",priority ="",a="";
%>
Following are the pending complaints ..
<TABLE BORDER=1 CELLSPACING=0 CELLPADDING=0 width="100%">
<TR>
<TD> ComplainD </TD>
<TD> ComplainId </TD>
<TD> ProbHeader </TD>
<!--
<TD> ProblemDescription </TD>
<TD> Problem Comments </TD>
-->
</TR>
<%
try
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
java.sql.Connection con = java.sql.DriverManager.getConnection("jdbc:odbc:Driver={Microsoft Access Driver (*.mdb)};" +"DBQ=c:/vishal/HelpDesk.mdb;DriverID=22;READONLY=false","","");
//java.sql.Connection con = java.sql.DriverManager.getConnection("jdbc:odbc:Portal");
java.sql.Statement stmt = con.createStatement(java.sql.ResultSet.TYPE_SCROLL_INSENSITIVE,java.sql.ResultSet.CONCUR_READ_ONLY);
s = "select * from Complains";
java.sql.ResultSet rs = stmt.executeQuery(s);
while(rs.next())
//getting data from database
empId = rs.getString("EmpId"); // out.print(" " + empId);
compid = rs.getString("ComplainId");
// out.print(" " + compid);
calltype = rs.getString("CallType");
// out.print(" " + calltype);
a = rs.getString("Complaindate"); //problem with this field
out.print(a); // prints value
%>
<TR>
<TD> <%=compid %> </TD>
<TD> <%=calltype %> </TD>
<TD <%=a %> </TD>
</TR>
<%
}//while loop
%>
</TABLE>
<%
}//try
catch(Exception ep)
out.println(ep);
System.exit(1);
%>
</BODY>
</HTML>
value in database is as follows :-
Complaindate
5/18/2003 1:30:27 PM
5/18/2003 7:32:43 PM
5/18/2003 7:34:02 PM
5/18/2003 7:49:19 PM
5/18/2003 7:50:27 PM
5/18/2003 10:49:42 PM
5/18/2003 10:58:24 PM
thanking u ,plz ask if any further clarificationsHi
I am seeing nothing wrong with ur code..
what about "view source" result.....plz check with that...
whether u r getting all the trs and tds...
revert back on this Issue..
Mars Amutha -
Plz help me to find out tables and fields........based on SD,PM,FICO Module
Hi plz help me to find out the table name and field names as i am unable to find .....In the spec am given requirements in the following pattern.
Description SAP-Term Explaination
1.Salesman Equipment AC Mgr. VBPA2 this is the salesman code - I need the
description for this.
2.Vendor MEPO_TOPLINE-SUPERFIELD Vendor field is pull from me23n where the
condition will be that COBL-KDAUF (this is a
structure from me23n in item data-account
assignment-sales order. The number here should
be the corresponding contract number. This field
should include a multiple selection function. User
can put more than one description to search for.
3. Val. Period Val. Period Category Val. Period Category from va41 header-contract
Category data. This field should include a multiple selection
function. User can put more than one description
to search for.
4. Service Order/ CAUFVD-GSTRP/ This should be the document date where by it is in
Purchase Order MEPO_TOPLINE-BEDAT between the range the user input
Document Date
5. B2B Vendor MEPO_TOPLINE-SUPERFIELD Vendor field is pull from me23n where the condition
will be that COBL-KDAUF (this is a structure from
me23n in item data-account assignment-sales
order. The number here should be the
corresponding contract number.
6. B2B Cost MEPO1211-NETPR This cost is pulled from PO (me23n) however take
note that the price will be pulled out base on line
item Net Price. Make sure that price is taken
corresponding only to the equipment tied to it.
Check on Number 7 to see how is the line item tied
to the equipment.
If this is in other currency please make it to SGD
with the exchange rate field Exchange rate
(MEPO1226-WKURS)
NOTE:: I need to know the table from which I can
determine the currency type as can be seen in the
ME23N transaction and also te exchange rate for
that particular currency.
7. No of faults The service order (CAUFVD-AUFNR) created base
on the equipment in Number 8. This should exclude
the service order of type RD08. Service order can be
access by IW33.
8. Faults Completed This would be the number of faults (Number 13)
which has a system status (CAUFVD-STTXT) of
TECO. System status can be viewed in IW33 Sys.
Status. Take note service order type RD08 will be
excluded
9. Time Spent on Fault AFVGD-ISMNW This field is in IW41 in confirmation base on the
order created. This field will be the actual time
spent. This will correspond to the Faults
Completed (Number 14). This means only orders
with system status TECO will be pull. Take not
service order type RD08 will be excluded
10. Fault Cost RIHAUFK_LIST- DGESKOSIST This will be the total cost for a service order which
have the status TECO. Those which are not TECO
will not be needed. This field can be obtain from
IW39 (standard report). Execute the report and
there will be a field for Total Actual Cost. You might
need to change the screen layout to be able to view
this. Take note service order type RD08 will be
excluded
11. PM Hours AFVGD-ISMNW This field is in IW41 in confirmation base on the
order created. This field will be the actual time
spent. This will correspond to the Faults Completed
This means only orders with system
status TECO will be pull. Take note service only
take order type RD08.
12. Spare Cost Spare part cost This field will be in IW33 under cost tab, and cost
PMCOEA-IKOSTENKGR tab in item level. This will be the actual cost of spare
part after TECO. This will include all order type.
13. Credit Note Credit Memo The programs need to pull out credit memo which is
reference from the contract. If there is a credit memo
reference from the contract then the value will be net
price per equipment.Can u tell me purpose of this spec ?
Regards,
pandu. -
How to write code for this logic, plz help me very urgent
Hi All,
i am new to sap-abap, i got this work and i m working on this can any body help me in writing code, plz help me, this is very very urgent.
here i m giving my logic, can anybody send me the code related to this logic.
this is very urgent .
this program o/p should be in ALV format and need to create one commond 'SAVE" on this o/t list if user clicks save processedon and processedby fields in ZFIBUE should be updated automatically.
i am creating one custom table zfibue having fields: (serialno, bukrs, matnr,prdha,hkont,gsber,wrbtr,budat, credate, cretime,processed, processedon, processedby,mapped)
fields of zfibue:
serailno = numc
bukrs = char
matnr = char
prdha = char
hkont = char
gsber = char
wrbtr = char
budat = date
credate = date
cretime = time
processed= char
processedon = date
processedby = char
mapped = char are belongs to above type data types
and seelct-optionfields: s_bukrs for bseg-bukrs
s_hkont for bseg-hkont,
s_budat for bkpf-budat,
s_processed for zfibue-processed,
s_processedon for zfibue-processedon,
s_mapped. for zfibue-mapped
parameters: p_chk1 as checkbox,
p_chk2 as checkbox.
p_filepath type rlgrap-filename.
1.1 Validate the user inputs (S_BUKRS and S_HKONT) against respective check tables (T001 and SKB1). If the validation fails, provide respective error message. Eg: Invalid input for Company Code.
1.2 Fetch SERIALNO, BUKRS, MATNR, PRDHA, HKONT, GSBER, WRBTR, BUDAT, CREDATE, CRETIME, PROCESSED, PROCESSEDON, PROCESSEDBY, MAPPED from table ZFIBUE into internal table GT_ZFIBUE where BUKRS IN S_BUKRS, HKONT IN S_HKONT, BUDAT IN S_BUDAT, PROCESSED IN S_PROCESSED, PROCESSEDON IN S_PROCESSEDON, and MAPPED IN S_MAPPED.
1.3 If P_CHK2 = X, go to step 1.11. Else continue.
1.4 If P_CHK1 = X, continue. Else go to step 1.9
1.5 Fetch MATNR, PRDHA from MARA into GT_MARA for all entries in GT_ZFIBUE where MATNR = GT_ZFIBUE-MATNR.
1.6 Sort and delete adjacent duplicates from GT_MARA based on MATNR.
1.7 Loop through GT_ZFIBUE where PRDHA = blank.
Read Table GT_MARA based on MATNR = GT_ZFIBUE-MATNR.
IF sy-subrc = 0.
Move GT_MARA-PRDHA to GT_ZFIBUE-PRDHA.
Modify Table GT_ZFIBUE. Update Product Hierarchy
Endif.
Fetch PRDHA, GSBER from ZFIBU into GT_ZFIBU for all entries in GT_ZFIBUE where PRDHA = GT_ZFIBUE-PRDHA.
Read Table GT_ZFIBU based on PRDHA = GT_ZFIBUE-PRDHA.
IF sy-subrc = 0.
Move GT_ZFIBU-GSBER to GT_ZFIBUE-GSBER.
Move X to GT_ZFIBUE-MAPPED.
Modify Table GT_ZFIBUE.
Endif.
Endloop.
1.8 Modify database table ZFIBUE from GT_ZFIBUE.
1.9 Fill the field catalog table GT_FIELDCAT using the details of output fields listed in section Inputs/Outputs (above).
Eg: LWA_ FIELDCAT -SELTEXT_L = 'Serial Number.
LWA_ FIELDCAT -DATATYPE = NUMC.
LWA_ FIELDCAT -OUTPUTLEN = 9.
LWA_ FIELDCAT -TABNAME = 'GT_ZFIBUE'.
LWA_ FIELDCAT-FIELDNAME = 'SERIALNO'.
Append LWA_FIELDCAT to GT_FIELDCAT
Note: a) The output field GT_ZFIBUE-PROCESSED will be editable marking INPUT = X in field catalog (GT_FIELDCAT).
b) The standard ALV functionality will be used to give the user option for selecting all or blocks of entries at a time.
c) The PF-STATUS STANDARD_FULLSCREEN from function group SLVC_FULLSCREEN will be copied to the program and modified to include a SAVE button.
1.10 Call the function module REUSE_ALV_GRID_DISPLAY passing output table GT_ZFIBUE and field catalog GT_FIELDCAT. Additional parameters like I_CALLBACK_PF_STATUS_SET (= ZFIBUESTAT) and I_CALLBACK_USER_COMMAND (=HANDLE_USER_ACTION) will also be passed to handle user events. Go to 2.14.
1.11 Download the file to P_FILEPATH using function module GUI_DOWNLOAD passing GT_ZFIBUE.
1.12 Exit Program.
Logic to be implemented in routine Handle_User_Action
This routine will have the following interface:
FORM Handle_User_Action USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
ENDFORM.
Following logic will be implemented in this routine:
1. If r_ucomm = SAVE, continue. Else exit.
2. Loop through GT_ZFIBUE where SEL_ROW = X. Row is selected
a. IF GT_ZFIBUE-PROCESSED = X.
i. GT_ZFIBUE-PROCESSEDON = SY-DATUM.
ii. GT_ZFIBUE-PROCESSEDBY = SY-UNAME.
iii. MODIFY ZFIBUE FROM work area GT_ZFIBUE.
Endif.
Endloop.Hi Swathi,
If it's very very urgent then you better get on with it, don't waste time on the web. Chop chop. -
Query on FBL3N................Urgent plz help me on this.
Hi Friends
Here is my query,
I am changing the tcode FBL3N to add one extra field into it and to display data in the name1 field for the spcific entries in the selection screen,
After selecting the All item radio button and giving the range in the select-options when i am pressing F8 it is giving me the correct output,after that when i am trying to display the name1 field by selecting the ctrl+f8 button and pressing the apply button it is giving me the error as
"An internal error has arisen in the form routine ANALYZE_ACT_FIELDCAT
for program RFITEM_INC.
This is due to inconsistencies between table T021S (special fields) and
structure RFPOSEXT."
I changed everything to Y* but still it is giving the error.
Plz help me in this if someone face the same prob or someone having idea on this.
Thanks a lot in Advance
Mrutyun^Hi Mrutyunjaya,
Did you manage to resolve this error?
Thanks and Regards
Pras -
"This file attachment is too large to be viewed." What?
I created a 15.6MB m4v for iPhone using compressor to test being able to email clips to a client for review on his iphone. A couple of strange things. First, when the message is received, the attachment now reads that it is 20.6MB in size. Second, when I attempt to open it on my iPhone... it gives me the message "This file attachment is too large to be viewed."
Is there a limitation with the iPhone here that I didn't know about?Yes this is a public board, which shouldn't exclude common courtesy.
This is a user to user help forum only and fellow users that post answers to questions or provide suggestions here volunteer their time to do so.
I don't have a problem with you providing what you think is a shortcoming, but there is nothing wrong with me providing a reasons or reasons why it isn't a shortcoming for the most part. If that is being "needlessly defensive", then you are needlessly interested only in thoughts that agree with your own.
What does that mean exactly? I wasn't suggesting they would, they usually use their own dedicated mail servers... which they can set to unlimited if they wish... which is why putting the limitation on the iphone pulls the rug out from under them if they want to use the iPhone AND send/receive large files via email. Pretty simple equation really.
What it means exactly is, you were talking about business use and you mentioned Gmail having a 20MB overall message size limit. Yes many businesses use their own dedicated server, which they can set to unlimited if they wish, but this will only work internally and with other businesses that do the same.
I'll bet you dollars to donuts the overwhelming majority of businesses with or without their own dedicated email server do not have an unlimited overall message size limit. Some may have a larger overall message size limit than 10MB, but 10MB is a very common limit.
So any way in which the iPhone can become more useful as a business device is a good thing... isn't it?
Certainly, but what you consider as being more useful may or many not match what I or someone else may consider as being more useful and there is nothing wrong with that.
Perhaps you will never need or otherwise enjoy landscape email, full screen attached video playback, or attachments greater than 10MB... but to not see the obvious improvement as a business device had these features been implemented in 2.0.2 just doesn't make any sense to me.
I have been discussing overall message size limits only. I haven't mentioned anything about these other items. -
Hi,
Can you’ll please help me with this query.
Here is a little bit of background:
One title can have multiple items associated with it.
Table: TITLE has the master list of titles. TITLE_ID is the primary key.
Table: ITEM has the master list of all items. ITEM_ID is the primary. This table also has the TITLE_ID which stores title for this item.
Table: ITEM_STATUS has fields ITEM_ID and STATUS_ID. This field contains statuses for items. But not all items contained in the table ITEM are in this table.
I want to find TITLE_ID’s whose all items (all ITEM_ID in table ITEM having same value for TITLE_ID) have a particular status (for example STATUS_ID = 2) in table ITEM_STATUS.
Let’s say TITLE_ID = 1 has 5 items in table ITEM_ID and only 4 items out of it in table ITEM_STATUS with STATUS_ID = 2, then this TITLE_ID should not come. OR
Let’s say TITLE_ID = 1 has 5 items in table ITEM_ID and all these 5 items are in table ITEM_STATUS but only 1 has STATUS_ID = 2, then this TITLE_ID should also not come
In the above case only if all 5 items are contained in table ITEM_STATUS have STATUS_ID = 2 then this TITLE_ID should be reported by the query.
What should be the query like for this one, I am fairly new to SQL so plz guide me.
Thank you,
RajaI haven't tested the query below. Try it and let me know for any issues:
SELECT DISTINCT t.title_id
FROM title t,
item i,
item_status its
WHERE t.title_id = i.title_id
AND i.item_id = its.item_id
AND NOT EXISTS (
SELECT 1
FROM item_status its1
WHERE its1.item_id = i.item_id
AND status_id <> 'YOUR_ITEM_STATUS'
)
Maybe you are looking for
-
Error Message When Syncing Ipod "There is no disk in the drive ... "
When doing a search on the internet for this error message, i see a few other previous posts on forums.ilounge.com with others having this issue with Itunes, but all I can find is someone talking about deleting the Itunes preferences files on my comp
-
Hi ! When i execute an Online program that use the function 'GUI_DOWNLOAD', then the program is running OK. However When i execute the same program in background i get an unknown error from the function 'GUI_DOWNLOAD' (return code 6 ) ! I wanted
-
How to create Same File Name in Recever side
Hi Frnds, 1)In my sender side i am having one XML file Name: vendor123.xml i have to send this file to receiver side with same file name, what are setting i need to do in file adapter. In receiver side i dont have any file, i have to crete with same
-
Nokia Lumia asking for code, when making a call
my husband bought a Nokia Lumia 920 2 days ago. For some reason when he is not at home, and tries to make a call it askes for his code, how come that. He also have trouble that it wont sent messages first time he want to... Best regards Betina
-
Matching colours in Illustrator?
I shot a photograph with a white object on a black background. I edited the photo in Photoshop. The background was pure black. I then 'placed' the photograph in Illustrator over a black background. Now the photo background shows up lighter than the I