ISA server 2006 OS Support Information (Product ID: 78984-270-4276405-04003)
1. We are using ISA server 2006 in Window server 2003RS SP2 OS and we are upgrading our OS form 2003 to 2012 standred Edt. 64bit.
So ISA server Compatible with 2012 standred Edt. 64bit
2. If it is not compatible with it then share the upgradation process of ISA server which is compatible with server 2012 standred Edt. 64bit.
HI
ISA is not supported on 2012 Server, You need to switch to TMG or UAG.
Also
Windows 2012 has a new feature called Remote Access role service in Windows Server® 2012 R2 which can be used to publish website.
If you want full fuctions of ISA then upgrade to TMG or UAG
Similar Messages
-
ISA server 2006 crashed after some times :(
Hello.
My ISA server is crashed. For
example when my clients upload files to a remote server my upload speed is Reduced and
server crashed :(. How can I troubleshoot it? It is
ver vital for me and my clients are upset.
Thank you and cheers.1. Some more information is needed. Your description of proble is incomplete and no one can guess what has happened.
2. Find some material evidence - like Event logs and fw logs
3. There is a special diskussion on ISA server in forum
http://forums.isaserver.org/ and trobleshooting procedures in
http://www.isaserver.org/
4. For troubleshooting read
http://support.microsoft.com/kb/943462
http://technet.microsoft.com/en-us/library/bb794787.aspx
http://technet.microsoft.com/en-us/library/bb794753.aspxhttp://blogs.technet.com/b/yuridiogenes/archive/2010/01/20/troubleshooting-isa-server-2006-performance-issues-webcast-for-ms-partners.aspx
Regards
Milos -
M4E and MS ISA server 2006 works well
Just to let you know, M4E and MS ISA server 2006 works well together. A new feature is that you can actually publish all Exchange services on only 1 IP address: OWA, OMA, Outlook everywhere (RPC over https) and active sync. There is a little glitch with the OMA that is unresolved. Look at this thread:
http://forums.isaserver.org/Cannot_publish_OMA%2c_EAS_and_OWA_with_only_one_listener/m_2002026314/tm.htmJust to let you know, M4E and MS ISA server 2006 works well together. A new feature is that you can actually publish all Exchange services on only 1 IP address: OWA, OMA, Outlook everywhere (RPC over https) and active sync. There is a little glitch with the OMA that is unresolved. Look at this thread:
http://forums.isaserver.org/Cannot_publish_OMA%2c_EAS_and_OWA_with_only_one_listener/m_2002026314/tm.htm -
Hello,
How can I determine how our ISA Server 2006 boxes are being utilized within our organization? The original Exchange 2003 admin left the company years ago and now I am here trying to prepare for our upgrade to Exchange 2010.
Any help will be greatly appreciated.
Thank you,
SandyLook at the firewall logs (for ALL traffic) to see if there is any activity at all for a period of time.
This should be sufficient to determine if the box is still be used at all.
https://technet.microsoft.com/en-us/library/bb794817.aspx?f=255&MSPPError=-2147217396
Blog: http://theinfraguys.com
Follow me at Facebook
The Infra Guys Facebook Page
Join the Singapore System Center Admin Group
SG System Center Admin Group
Please remember to click Mark as Answer on the answer if it helps you in anyway -
ISA Server 2006 DNS error issue
we are using ISA server 2006, and we are facing issue DNS Clients services, we need to restart its DNS client services in 10min or 15mins, 1st error event ID is 8003, Sources :-MRxSmb and 2nd event ID 11160, Source:- DNSApi.
Hi,
By default, ISA Server is configured to log requests that come through the Web Proxy Service. You can check by opening
the ISA Management MMC and choosing Monitoring Configuration, and then clicking Logs. In addition,
all log files are stored in the ISALogs folder found in the Microsoft ISA Server folder if you never specify the folder for storing the log file.
You can check the IAS log files for troubleshooting since it is hard to say which would be the reason.
Best regards,
Susie -
All,
I am in a predicament with internet browsing speeds...We have a 3rd party look after our line and internet facing f/w so I cant troubleshoot them, so at the moment Im looking at ISA as the potential bottleneck - we have a fairly standard environment:
Internal > Local Host > Perimiter n/work > Firewall > Internet
I have been running custom reports on the ISA server to see what data can be collected - I have noticed that "Average response time for non cached requests" (traffic by time of day) can be as high as 76 seconds!!!!!! Cached hits are between .5
and 2 seconds.
I have also coonfigured a connectivity verifier which is also flagging slow connectivity, massively over the >5000ms and also reporting "cant resolve server name on occassions- and this is configured for
www.Microsoft.com --- DNS ???!?!, however I have looked through DNS (no obvious errors / config issues) which I can see
I have run the BPA on ISA server to ensure its Health - - connectivity verifier errors flagged timeouts to microsoft.com as expected...
Can anyone advise any obvious areas to investigate as Im struggling! - as always the 3rd party have told us the internet pipe is fine :OProblem resolved.
DNS forwarders have been changed on the ISA server / DNS and this has improved lookup speed considerably.
thanks all :) -
Cleanup of ISA rules in ISA server 2004 and 2006
Hi Team
how could i know, which rules are actively working and which rules are not being used in ISA server 2004 and 2006 . based on this we are going to disable the rule initially and delete the rules which is currently not being used in later stage. since we have
lot rules in ISA , we need to segregate this
Could you please able to help meHi,
Please check the Creating Custom Reports parts in the following blog to see whether it can help you.
Logging and Reporting in ISA Server 2006
http://www.isaserver.org/articles-tutorials/configuration-general/Logging-Reporting-ISA-Server-2006.html
Note:
Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
Best Regards,
Joyce -
I have external proxy that is used to get intranet access . i just want to filter some sites from this proxy , the best solution to get this approach is installing ISA server.
according to my communications with Microsoft people here in Egypt , there is no support for ISA server from MS any more and MS do not sell ISA server.
my question , what is the best solution for my issue to prevent some sites from access on some clients?
is ISA server no more supported from MS?
Maged Ramez LabibHi,
As Milos Puchta mentioned, ISA Server is not supported:
http://blogs.technet.com/b/yuridiogenes/archive/2009/06/26/isa-server-support-life-cycle.aspx
And you could use TMG, it is supported:
http://support.microsoft.com/lifecycle/search/default.aspx?sort=PN&alpha=Forefront+Threat+Management+Gateway+&Filter=FilterNO
Regards.
If you need further assistance, i would suggest you may ask in:
http://social.technet.microsoft.com/Forums/forefront/en-US/home?forum=Forefrontedgegeneral
Regards.
If you have any feedback on our support, please click
here
Vivian Wang -
ISA server Compatible with 2012 standred Edt. 64bit
We are using ISA server 2006 in Window server 2003RS SP2 OS and we are upgrading our OS form 2003 to 2012 standred Edt. 64bit.
So ISA server Compatible with 2012 standred Edt. 64bit?Hello,
Please read this links:
http://social.technet.microsoft.com/Forums/windowsserver/en-US/1d2d9a08-8656-4cae-bf30-10ce6e874c67/isa-for-window-server-2012
http://social.technet.microsoft.com/Forums/forefront/en-US/0e6af2cf-2c18-408e-8da6-2f751181026a/future-of-forefron-tmg-support-and-service-packs-?forum=Forefrontedgegeneral
Regards -
I can't connect to ISA Server proxy
Hello,
I have Nokia E70 and I can't connect to the Internet at my work place since they run the ISA Server 2006 as a proxy. The thing is, I can't find where should I supply my Domain username and password.
After the phone connects to the Wireless, it doesn't complete to open the page and give me an error message "Unable to complete operation"
So could you please tell me what should I do?m8s,
An IT dept. that does not provide support! What ever the reason most likely they don't want to slow downs the whole network. An ISA admin knows(should) this.Heres a sample of one IT dept in a university suggest to one with E51.
E51 a sample settings for ISA server connection (it could different according what security being implemented) * WLAN security mode: 802.1X
* WLAN Security settings:
* WPA/WPA2: EAP
* EAP plug-in settings:
* EAP-PEAP (Only this one is selected).
* Personal ceritificate: Not Defined
* Authority certificate: Certificate of your ISA Server
* User name in use: User defined
* User name: Your User Name (Can be eventualy: Your Domain\Your User Name
* Realm in use: User defined
* Realm: Empty
* Allow PEAPv0: Yes
* Allow PEAPv0: No
* Allow PEAPv0: No
* EAP-MSCHAPV2 (Only this one is selected).
* User name: Your User Name
* Prompt password: No
* Password: Your Password
Note that you *have to* install the certificate of your Radius Server on your phone (ie: it is not trusted if you leave it blank).
Knowledge not shared is knowledge wasted!
If you find it helpfull, it's not hard to click the STAR.. -
SharePoint 2010 and ISA server proxy - Any step by step documentation to do this?
Hi there,
I know that ISA is deprecated - still for next few months we still need to use it.
I will appreciate if you could please share any document on how to have a SharePoint 2010 Intranet Web Application available on Internet using ISA server proxy.
Thank you so much.Hi,
here you are
http://blogs.technet.com/b/paulpaa/archive/2009/09/23/steps-to-publish-sharepoint-sites-created-in-host-header-mode-hh-mode-with-isa-server-2006.aspx
http://serverfault.com/questions/174061/how-to-configure-aams-in-sp-2010-to-work-with-isa-2006-and-kerberos-authenticati
http://www.benjaminathawes.com/2010/08/22/publishing-sharepoint-2010-with-isa-server-2006-sp1/
http://www.isaserver.org/articles-tutorials/publishing/How-to-Publish-Microsoft-Sharepoint-Service-ISA-Server-2006.html
http://technet.microsoft.com/library/bb794854.aspx#SecureWebPublishing
Kind Regards,
John Naguib
Technical Consultant/Architect
MCITP, MCPD, MCTS, MCT, TOGAF 9 Foundation
Please remember to mark your question as answered if this solves your problem -
Hi
In ISA server 2006, everyday end users reports that they are being prompted for authentication. Its ISA 2006 installed in windows server 2003 and active directory environment
After restarting the affected server it will start working again. What could be possible reasaons
Please advise if anyone dealt with the same situation. Thanks!!Hello,
ISA server related questions please ask in
https://social.technet.microsoft.com/Forums/forefront/en-US/home?forum=Forefrontedgegeneral
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://blogs.msmvps.com/MWeber
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
Twitter: -
Testing an ISA Server Rule, the recursive query to other DNS Servers test fails
Hello,
I am trying to configure the following infrastructure with ISA Server 2006 and two W2003 servers (called "Server1" and "Server2") . "Server1" is a domain controller, and in
"Server2" is the ISA Server installed, which also has
attached two network Ethernet cards, one called "Internal Ethernet Card", and the other one called
"External Ethernet Card".
The infrastructure would be: "Internal Ethernet Card"---- ISA Server ----"External Ethernet Card"---"Router"----"Internet"
"Internal Ethernet Card" manages the internal package traffic of the infrastructure, the network segment which belongs is isolated from what we could called the Outbound traffic, which is linked to a router. "Internal Ethernet Card" it`s
a virtual network.
"Internal Ethernet Card" feature configuration is the following:
- IP address: 192.168.3.3
- Subnet Mask: 255.255.255.0
- DHCP Enabled: No
- DNS Server: 192.168.3.1 (Must point to the DC "Server1" which has the DNS Service installed)
- Default Gateway: None (because doesnt point to outside)
- Primary WINS Server: 192.168.3.1
The "External Ethernet Card" provides, the outbound connection, and this card is connected to the physical router.
It`s feature configuration is the following:
- IP address: 192.168.1.50
- Subnet Mask: 255.255.255.0
- DHCP Enabled: No
- Default Gateway: 192.168.1.1
- DNS Servers: 192.168.3.1 (Must point to the DC "Server1" which has the DNS Service installed)
After configuring the network cards, I create the following rule in the ISA Server to allow the traffic towards outside from the server and the clients which have joined to the domain:
Action: Allow. Protocol: DNS. From:"Server2". To : External. Condition: All Users
After applying the changes to update the configuration, I enter in the Dns Server of "Server1" and in the "Monitoring" tab, I run a "recursive query to other DNS Servers" but fails.
Only works the "simple query against this DNS Server".
I don`t know why fails, but I`m stucked on this issue, because in the "Server1" DNS Server, in the "domain forward IP address list", I have added two DNS addresses which work OK.
I would appreciate some help to solve this issue.
Thanks
RegardsHello Ms. Long,
Yes, you are right. In the Server1 is configured the DNS server, to use forwarders whose are set in the field "Selected domain`s forwarder IP address list", two DNS address numbers obtained from "Open DNS", which work well.
There is no DNS Server linked to the External NIC.
The Server1 belongs to a private network configured as "VMnet3", which it is set as follows:
IP address: 192.168.3.1
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.3.3
DNS Server: 192.168.3.1
I have tried to test your suggested idea:
> set d2
> google.com
Server: srv-dcfs-01.dominio.local
Address: 192.168.3.1
SendRequest(), len 42
HEADER:
opcode = QUERY, id = 2, rcode = NOERROR
header flags: query, want recursion
questions = 1, answers = 0, authority records = 0, additional = 0
QUESTIONS:
google.com.dominio.local, type = A, class = IN
Got answer (113 bytes):
HEADER:
opcode = QUERY, id = 2, rcode = NXDOMAIN
header flags: response, auth. answer, want recursion, recursion avail.
questions = 1, answers = 0, authority records = 1, additional = 0
QUESTIONS:
google.com.dominio.local, type = A, class = IN
AUTHORITY RECORDS:
-> dominio.local
type = SOA, class = IN, dlen = 46
ttl = 3600 (1 hour)
primary name server = srv-dcfs-01.dominio.local
responsible mail addr = hostmaster
serial = 41
refresh = 900 (15 mins)
retry = 600 (10 mins)
expire = 86400 (1 day)
default TTL = 3600 (1 hour)
SendRequest(), len 28
HEADER:
opcode = QUERY, id = 3, rcode = NOERROR
header flags: query, want recursion
questions = 1, answers = 0, authority records = 0, additional = 0
QUESTIONS:
google.com, type = A, class = IN
DNS request timed out.
timeout was 2 seconds.
timeout (2 secs)
SendRequest failed
*** Request to srv-dcfs-01.dominio.local timed-out
As you can see highlighted in bold, the problem remains in the "recursive query to other DNS Servers" check.
Maybe is better to put the issue on the "Windows Server General Forum" , because the issue has not nothing in common with the ISA Server, dont you?
Thanks
Best regards -
SQL Server Reporting Services installed on a production database server used to support JD Edwards EnterpriseOne. What performance isses can arise. Is it recommended. What are the pros and cons
Hi hazelannc,
I am trying to involve someone more familiar with this topic for a further look at this issue. Sometime delay might be expected from the job transferring. Your patience is greatly appreciated. Thank you for your understanding and support.
Regards,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
Applet fails to connect behind isa server 2004
hi, for security I have to activate authentication on Isa server 2004 and under this configuration the applet can't connect here is the log:
NETg Learning Studio (Web) 3.1.8.8
Copyright � 1997-2005 Thomson NETg, a division of Thomson Learning, Inc. All rights reserved.
java.vendor = Sun Microsystems Inc., version = 1.5.0_06
os.name = Windows XP
Friday, September 15, 2006
Memory: Total 4767744, Free 998864
SMD was found.
AICC_HACP_Connection: IOException processHACPPost().
java.net.SocketException: Connection reset
at java.net.SocketInputStream.read(Unknown Source)
at java.io.BufferedInputStream.fill(Unknown Source)
at java.io.BufferedInputStream.read1(Unknown Source)
at java.io.BufferedInputStream.read(Unknown Source)
at sun.net.www.http.HttpClient.parseHTTPHeader(Unknown Source)
at sun.net.www.http.HttpClient.parseHTTP(Unknown Source)
at sun.net.www.protocol.http.HttpURLConnection.doTunneling(Unknown Source)
at sun.net.www.http.HttpClient.parseHTTP(Unknown Source)
at sun.net.www.protocol.http.HttpURLConnection.doTunneling(Unknown Source)
at sun.net.www.protocol.https.AbstractDelegateHttpsURLConnection.connect(Unknown Source)
at sun.net.www.protocol.http.HttpURLConnection.getOutputStream(Unknown Source)
at sun.net.www.protocol.https.HttpsURLConnectionImpl.getOutputStream(Unknown Source)
at netg.AICC.HACP.nls_jk.i(DashoA8374)
at netg.AICC.HACP.nls_jk.a(DashoA8374)
at netg.AICC.HACP.nls_nj.allSecure(DashoA8374)
at netg.signpost.nls_kq.run(DashoA8374)
at java.security.AccessController.doPrivileged(Native Method)
at netg.signpost.SunSecurity.g(DashoA8374)
at netg.signpost.SunSecurity.f(DashoA8374)
at netg.AICC.HACP.nls_jk.a(DashoA8374)
at netg.InterNETgBase.run(DashoA8374)
at netg.util.nls_l.run(DashoA8374)
Could not communicate with HACP host!
and when (for testing purposes) I deactivate authentication on my ISA the applet works fine (here is the log)
NETg Learning Studio (Web) 3.1.8.8
Copyright � 1997-2005 Thomson NETg, a division of Thomson Learning, Inc. All rights reserved.
java.vendor = Sun Microsystems Inc., version = 1.5.0_06
os.name = Windows XP
Friday, September 15, 2006
Memory: Total 9728000, Free 1392944
SMD was found.
Sending HACP host the following:
command=GetParam&version=2.0&session_id=CRS3684_SCR2304_STU9782_SOL59084_&AICC_Data=
HACP host returned the following:
Error=0
error_text=successful
version=2.0
aicc_data=
[Core]
Student_ID=josky.jara
Student_Name=Jara, Josky
Lesson_location=
path=
Credit=credit
Lesson_status=I,A
Score=
Time=73:09:13
Lesson_Mode=Normal
[Core_Lesson]
TSF=0_2_0_1lsi_42_42_cuc2_0_0_0_0_0_0_0_; MVA=00000000000000; UPF=12_2_0_1_0_1_1; sSkew=0; ATS1=fvvv; LastTopic=en_US_20811_Assmt1.nlo; MP=80; PC=48; DOWNLOAD=0; LastPage=-1;
[Core_Vendor]
[Student_Data]
Mastery_Score=80
Error: java.lang.ThreadDeath: null
java.lang.ThreadDeath
at java.lang.Thread.stop(Unknown Source)
at java.lang.ThreadGroup.stopOrSuspend(Unknown Source)
at java.lang.ThreadGroup.stop(Unknown Source)
at sun.awt.AppContext.dispose(Unknown Source)
at sun.applet.AppletClassLoader.release(Unknown Source)
at sun.plugin.security.PluginClassLoader.release(Unknown Source)
at sun.applet.AppletPanel.release(Unknown Source)
at sun.applet.AppletPanel.sendEvent(Unknown Source)
at sun.plugin.AppletViewer.onPrivateClose(Unknown Source)
at sun.plugin.AppletViewer$1.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
loading copyright notices
loading copyright notices
loading copyright notices
Copyrights for NLO /skillb/en_US_20811/en_US_20811.nlo:
Copyright � 2004 Thomson NETg, a division of Thomson Learning, Inc.
All rights reserved. No part of the material protected by this copyright may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying, recording, broadcasting, or by any information storage and retrieval system, without permission in writing from Thomson NETg.
Skill Builder is a registered trademark of Thomson NETg. All other trademarks referenced are the trademark, service mark, or registered trademark of their respective holders. Thomson NETg is not affiliated with any company or any other product or vendor mentioned in this course and its accompanying materials.
Cisco Systems is a registered trademark of Cisco Systems, Inc. Cisco IOS is a trademark of Cisco Systems, Inc. Novell and Netware are registered trademarks of Novell, Inc.
The software and technology used to implement this course contain trade secrets that Thomson NETg considers to be confidential and proprietary information, and your right to use this material is subject to the restrictions in the license agreement under which you obtained it.
Companies, names, products, and data used in the examples in this course are fictitious. Any resemblance to existing companies, persons, or products is coincidental and unintentional.
Versions for NLO /skillb/en_US_20811/en_US_20811.nlo:
BuilderVersion=Builder Version: GenNLO 3.6.2.32
BuildDate=Build Date: 05-Jul-2004
TemplateVersion=Template Version: 20030630
ContentVersion=Content Version: 20811-0406-10
SrcOrigRelease=Original Release: <200407051839>
SrcCurRelease=Current Release: <200407051839>
SrcPrevRelease=Previous Release: <>
SrcNlo=Source Nlo: <>
LocalOrigRelease=Local Original Release: <>
LocalCurRelease=Local Current Release: <>
LocalPrevRelease=Local Previous Release: <>
PandoraVersion=Pandora Version: 1.2.0.0
PandoraBuildDate=Build Date: 09-Jul-2004
RSObjective not found.
bUseUserDir = false
vars.netgIniFile set to "C:\Documents and Settings\All Users\Application Data\NETg/netg.ini"
In DisplayViewSettings...
curMode = -1
In preferences, audioinstalled = 1
no UserLinkBox
Setting default font size to 12
could someone give me a hand?Try a security/authentication forum. This isn't a VM issue.
Sorry.
Maybe you are looking for
-
How do I track down a missing account?
Hi. I purchased an iTunes music store gift card for my son for Xmas. I thought we'd installed everything correctly and created an account for him, then entered the number on the gift certificate. I distinctly recall seeing him open up the store using
-
Can't select iCloud icon in settings
I can see the iCloud icon in settings on my iPad2 but it won't allow me to select it. Could someone please help me as I've looked at various things like upgrading and restoring but none of them have worked.
-
My iPhoto icon disappeared and is no longer in my applications folder
I suddenly couldn't open iPhoto although all other iLife applications work well. I opened my web page blog and another window also opened up saying media files: There were all my pictures. I could open both events and pictures (tiny thumbprints). How
-
Loading different sized pictures into loader
Hi all, I've got a problem....I've created a photo gallery in flash 8 using a loader component but I'm using photos of different sizes.So I had to size the loader to all possible photo sizes but then the pictures tend to load all over the place withi
-
[Studio8] : Comment afficher les caractères accentués de données XML ?
Bonjour, Dans Flash, j'affiche dans mes pages des données extraites d'un fichier XML. Les caractères accentués ne sont pas correctement affichés. Quelqu'un a t il la solution ? Merci