ISE Failover Device Licensing

I am working on getting ISE licensing requirements put together for the upcoming budget.
I am confused on licensing for a failover appliance. Do we need to get another set of licenses for the failover appliance, or will the licenses for the primary device cover the failover?

Hi,
Prior to ISE Release 1.2, customers could only specify ISE licenses to be registered to a single ISE Administration Node (i.e., the Primary Administration Node). Now, ISE Release 1.2 delivers the capability to register ISE licenses to two Administration Nodes (i.e., Primary and Secondary Administration Nodes). The registration of an ISE license to the Primary Administration Node remains mandatory, but the option to register a Secondary Administrative Node is available.
Reference link,
http://www.cisco.com/c/en/us/products/collateral/security/identity-services-engine/sales_tool_c96-729045.html

Similar Messages

Cisco ISE - expired demo license alarm

Hi,
We are implementing Cisco ISE 1.2.0.899 and have an alarm reporting expired license. This alarm refers to the Advanced License demo and is therefore a false positive.
This issue is that we cannot remove the demo icense and stop the root cause of this false positive alarm.
Does anyone has an idea?
Thanks in advance.
Regards,
Telmo Oliveira

Please refer the discussion below
https://supportforums.cisco.com/discussion/12059041/ise-advanced-eval-license-alerts-after-full-base-install

Photoshop CC, device license, installation, activation

I subscribed via the French Federation of Photography : a Device license for Photoshop CC.
I got through the installation. (I am administator of the team).
In the administration console, I saw the the license has been activated.
Note: All following messages are in French. I translate them.
At the first run of PS I got a popup window about "Required Connection". I press continue and surprise:
I am said that I can use Adobe Photoshop CC for 32767 days!! (Great for a trial period!).
When I press the button "Activate now", it opens a new window for subscription.
What is my status? Can I use PS CC safely for all my subscription time (one year)?
update: I tried to run PS CC again, and now I am said I have a 30 days trial period. Of course this is not what I was expecting.!
Charles

Sign in, activation, or connection errors | CS5.5 and later
Mylenium

Ise failover test

As part of an ISE implementation, I want to test ISE failover for Admin, MnT, and PSN personas. Does anyone have an ISE failover test plan or ISE failover test best practices documentation to share?
Thanks much,
David Daverso

Steps for Administration persona failover testing
1. Stop ISE services on Primary Admin
Primary Admin# application stop ise
2. Log in to the Secondary Admin GUI and manually promote to Primary
3. Wait 10-15 minutes before process is complete
4. Verify ISE services are up on promoted Secondary Admin
Secondary Admin# sh application status ise
5. Promoted Primary Admin checks
Deployment pages shows all nodes are green and in synch
6. User testing to verify successful authentications and logging
Note:
After you promote your secondary Administration node to become the primary Administration
node, you must reconfigure your scheduled Cisco ISE backups in the newly promoted primary
Administration node
because scheduled backups are not replicated from the primary to secondary Administration
node.
7. After step 6 testing is complete restore original Primary Admin
8. Start ISE services on original Primary Admin
Primary Admin# application start ise
9. Verify ISE services are up on original Primary Admin
Primary Admin# sh application status ise
10. Promoted Primary Admin checks
Deployment pages shows original Primary Admin green and in synch
11. Stop ISE services on Promoted Primary Admin
Secondary Admin# application stop ise
12. Log in to the original Primary Admin GUI and manually promote to Primary
13. Wait 10-15 minutes before process is complete
14. Verify ISE services are up on original Primary Admin
Primary Admin# sh application status ise
15. Promoted Primary Admin checks
Deployment pages shows all nodes are green and in synch
16. User testing to verify successful authentications and logging
Note:
After you promote your secondary Administration node to become the primary Administration
node, you
must reconfigure your scheduled Cisco ISE backups in the newly promoted primary
Administration node
because scheduled backups are not replicated from the primary to secondary Administration
node.
17. Start ISE services on original Secondary Admin
Secondary Admin# application start ise
18. Verify ISE services are up on original Secondary Admin
Secondary Admin# sh application status ise
19. Primary Admin checks
Deployment pages shows original Secondary Admin green and in synch
20. User testing to verify successful authentications and logging

CUCM 8.5 Not showing all device licenses

I noticed when adding more device licenses today that the License Unit Report is not showing the new licenses. I can view each license file and have verified the correct MAC address, but I am 40 device licenses short of what I should have.
I have tried restarting licensing service as well as restarting CUCM completly.

A couple things I'd try would be:
1) Check the "Call Statistics" on each phone (during a call) to confirm they think they are sending and recieving video.
1) Is a privacy shutter closed on one end or the other? Is one side or the other muted?
2) factory reset both of the phones...
3) Remove both phones from UCM and reregister them.
4) Grab a capture on a port connected to one of the phones..to see what traffic you're actually seeing
5) Are there any firewalls/ACLs that would block the video stream?

No more device licenses in WPF Client

Hi All,
I am working on SAP Service Manager 4.0 which was running perfectly in WPF client CRMSMWPF00_0-10013291.exe
But suddenly it started giving error - "No more device licenses in WPF client" and in Agentry Server the log shows - "Device licenses limit exceeded"
I reinstalled the WPF client but the issue remains the same.
I tested the application in ATE and the application was downloaded without any issue.
Please suggest me why I am getting this issue and what should be done to solve this issue.
Looking forward for your support
Thanks and Regards
Neha Mahanty

Neha,
See SAP KBA: http://service.sap.com/sap/support/notes/1886698
Stephen Streeter

Device licenses revert to trial version. can anyone help?

my device license was working fine. All of the sudden it went back to trial version.

Hello, thanks for replying.
This is in reference to apps on device licensing for the education sector. When I try to open the app, it goes to trial version and it should not be doing that as licenses are paid for.
From: Jeff A Wright <[email protected]>
To: Rafael Figueredo <[email protected]>
Sent: Thursday, November 13, 2014 6:52 PM
Subject: device licenses revert to trial version. can anyone help?
device licenses revert to trial version. can anyone help?
created by Jeff A Wright in Adobe Creative Cloud - View the full discussionRafiguer which Adobe software or service is your inquiry in reference too? If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/6928019#6928019 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/6928019#6928019 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Adobe Creative Cloud by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Setting the "Device Name" when activating device licenses

What determines the “Device Name” in the list of activated devices in the Development Pool on the Adobe license site for device licenses? Specifically for Macs... It doesn't seem to be the "Sharing Preferences" pane...

So, figured it out by myself. It appears that the Adobe serializer uses the local Mac's hostname. You can find that out by going to the terminal and typing 'hostname'. The host name gets set initially by any domain name that is assigned to the IP. If none is, it uses the Sharing Name in the Sharing preferences pane. Regardless, you can override and change the hostname using the terminal (sudo scutil --set HostName mynewhostname.local). Deauthorize the device on the Adobe site and reauthorize and it will appear as desired. This way, you can have the machine listed on the Adobe site however you wish rather than by domain name. This is helpful if you have a long list of machines and wish to set their hostnames to their room number or location, etc.

Creative Cloud Device License Install Fails

I am trying to install the Creative Cloud Device License but it fails about 75% of the way through saying to contact Manufacturer. I have attached a screenshot. Not sure what to do here…...
Im running 10.7.5 and was recently running CS6.

This is how we resolved it. Used a 32GB Flash Drive formatted the drive HFS+ and then copied the PKG folder and files and then brought them to the target Mac and copied the files over and ran the PKG and Exceptions install. Everything seems to be installing fine now.

Device licensing: OK for remote desktop access?

Is it permissible in device licensing of Creative Cloud to have the programs installed on a computer and then have all users access its programs via Microsoft Remote Desktop?

Hi,
I would like to check if you need further assistance.
Thanks.
Jeremy Wu
TechNet Community Support

(OSX) We have device licenses, but random Macs stop working and demand sign in. Signing in allows trial activation.

OSX 10.9.x
We have device licenses which we have deployed via Deploy Studio image, however occasionally a single Mac in a classroom will refuse to load Creative Cloud apps and demands that the user signs in with an Adobe ID. If a valid Adobe ID is used (even the one attached to our account that was used to download the device licenses) then we get the option of activating a trial mode.
All Macs have Internet access, and CC has only been installed over the last few months. Re-imaging resolves the problem, but is a bit overkill as a solution.
Is anyone else seeing this behaviour?

Hi screen-name-pf ,
We need to see the PDApp.log and amt3.log file of the machine where the install is failing to tell you the reason of failure. The log file is formed at /usr/Library/Logs/PDApp.log.
Sarika

Incorrect Deployed To count for device licensing

My Deployed To count for device licensing says 22, but I've only deployed it to 6 machines. Is there a way to see what computers Adobe thinks are using licenses?

Did you ever get a reply or find an answer to this? I'm “missing” some licenses myself, and there is no information about this. Technical details for sysadmins are sorely lacking.

Per Device licenses question

Hi,
I have a question about per Device licenses in RDS 2012.
Let say 100 licenses are added to License Server. Issued shows 80.
When issued licenses count will reach 100. Could 20 new computers access RDS in case that 20 from initial 100 will not connected?
Are the licenses concurrent?
Thanks
--- When you hit a wrong note its the next note that makes it good or bad. --- Miles Davis

Here is the link explaining the Revocation acton (and etc):
"After you have revoked the RDS Per Device CAL, that RDS Per Device CAL is immediately available to be issued to another client computer or device."
http://technet.microsoft.com/en-ca/library/cc732416.aspx
extracted:A permanent RDS Per Device CAL issued by a license server is configured to automatically expire after a random period between 52 and 89 days, at which time the RDS Per
Device CAL returns to the pool of available RDS Per Device CALs on the license server.
In some circumstances, you might want or need to return an RDS Per Device CAL that has been issued back to the available pool on the license server before the automatic expiration period has been reached. For example, you might want to do this if the
client computer or device is no longer a part of your environment.
You can revoke an RDS Per Device CAL by using the Remote Desktop Licensing Manager tool.
Important
You can only revoke an RDS Per Device CAL. You cannot revoke an RDS Per User CAL.
After you have revoked the RDS Per Device CAL, that RDS Per Device CAL is immediately available to be issued to another client computer or device. Revocation is not a substitute for ensuring that you have enough RDS Per Device CALs to support
your environment.
You can only revoke up to twenty percent of the number of RDS Per Device CALs of a particular version installed on your license server. For example, if there are 100 Windows Server 2003 TS Per Device CALs installed on the license server, you
can only have 20 of those Windows Server 2003 TS Per Device CALs revoked at any given time. If you also have 200 Windows Server 2008 R2 RDS Per Device CALs installed on the license server, you can revoke up to 40 of those Windows
Server 2008 R2 RDS Per Device CALs in addition to the Windows Server 2003 TS Per Device CALs that you have revoked.
--- When you hit a wrong note its the next note that makes it good or bad. --- Miles Davis

VIP device license - moving installations to new devices

I am considering purchasing two Educational CC VIP Device Licenses (as opposed to Named Licenses) for use in my computer lab.
My question is: Once I have deployed the software using the CC Packager, am I allowed to uninstall the software and move it to another device? For example, if one of my lab computers breaks down or is replace, can I move the license to a new computer, or is the device license forever tied to that computer?
It looks like this is fine for Named Licenses (since they are tied to an individual account) but It's not made clear if this is possible for Device Licenses.

Sorry if I'm being dense here.
My understanding is that the only version of Palm Desktop that will run on Vista is 6.2, so I have installed that version.
My old computer ran on an earlier version of both Windows and Palm Desktop.
When I open Palm Desktop 6.2 on the new computer and select "import", the only file types it sees are .dba and .vcal.
The datebook file from the old computer that appears (by it's last modified date) to include the latest information is a .dat file - and the version 6.2 won't see that file, so I can't (near as I can tell) import it.
Is there any option short of installing the OLD version of Palm Desktop on another computer with an earlier operating system and then using that computer to export the data into something that 6.2 can import (I'm only assuming that would work - but it seems cumbersome even if it would).
Thanks,

How do I actually talk to a real person about Device Licensing for Create Cloud

The website sends me in circles

please refer KB article: Creative Cloud Help | Create packages with device licenses
or support contact number: 1-800-443-8158

ISE Failover Device Licensing

Similar Messages

Maybe you are looking for