ISE RBAC, limiting data to regional admins

Hey all, I was playing around a little bit with the local RBAC. The config is fairly straightforward in limiting access to menus and works like a champ. However I'm struggling a little bit with limiting access to data. Here is the strategic goal:
Create local site users that can only look at the 'operations' menu. Limit what appears in the data fields to only things from their particular sites, so that only authentications from the site show up for instance.
Here is what I tried to do:
Created a network device group for the site under 'all locations'
Created a Data access permission with:
Site group->Full Access
Created an admin access policy with the following rule:
If Admin Groups=Site Then Permissions=Menu-Helpdesk Admin (operations only) and Data-Site group access
Created admin group for the Site
Created a user and assigned it to the Site admin group
When I log in it's limited to the operations menu as expected. However I can view all authentications, it isn't limited to auth that happened on the location WLC I defined.
Now that was just a guess on how to limit the info based on my logic. So, if anyone knows how to limit this let me know, thanks!

Please refer "Role-Based Permissions" from
http://www.cisco.com/c/en/us/td/docs/security/ise/1-2/user_guide/ise_user_guide/ise_man_admin.html#62254
Data Access Name
RBAC Group
Permissible Admin Groups
Permissible Network Device Groups
Super Admin Data Access
Super Admin
Admin Groups
User Identity Groups
Endpoint Identity Groups
All Locations
All Device Types
Policy Admin Data Access
Policy Admin
User Identity Groups
Endpoint Identity Groups
None
Identity Admin Data Access
Identity Admin
User Identity Groups
Endpoint Identity Groups
None
Network Admin Data Access
Network Device Admin
None
All Locations
All Device Types
System Admin Data Access
System Admin
Admin Groups
None
RBAC Admin Data Access
RBAC Admin
Admin Groups
None

Similar Messages

RBAC ISE 1.2 Data Access Permissions

Hello,
We are trying to configure ISE 1.2 patch 7 RBAC profiles.
The idea is that regional admins can only manage their users.
Under User Identity Groups we have several groups for example:
UK-Users
Brazil-Users
Russia-Users
Each identity is then added to the correct group based on their location / country.
We also have a UK-Admin group that contains the UK admins.
Next I crate the permissions and policy...
We have a Menu access permission (Identity Menu Access) that only allows the access to Administration > Identity Management.
We then configure a Data access permission (UK Data Access) that only allows access to User Identity Groups > UK-Users.
Next I set a policy that says UK-Admin group can only access Identity Menu + UK Data).
Then test...
I create a user and add them to the UK-Admins group.
When I login as a UK admin I can see all the data across all user idnetity groups.
I would expect to only see the users in the UK-Users group, but I dont!
Confused.

Please refer "Role-Based Permissions" from
http://www.cisco.com/c/en/us/td/docs/security/ise/1-2/user_guide/ise_user_guide/ise_man_admin.html#62254
Data Access Name
RBAC Group
Permissible Admin Groups
Permissible Network Device Groups
Super Admin Data Access
Super Admin
Admin Groups
User Identity Groups
Endpoint Identity Groups
All Locations
All Device Types
Policy Admin Data Access
Policy Admin
User Identity Groups
Endpoint Identity Groups
None
Identity Admin Data Access
Identity Admin
User Identity Groups
Endpoint Identity Groups
None
Network Admin Data Access
Network Device Admin
None
All Locations
All Device Types
System Admin Data Access
System Admin
Admin Groups
None
RBAC Admin Data Access
RBAC Admin
Admin Groups
None

Did Cisco ISE have limitation for policy setting?

Deat All,
Did anyone know about Cisco ISE limitation about policy setting?
Right now my setting for windows posture policy around 200 windows patch checking, did ISE have limitation such as maximum windows patching policy line?
Thanks you
Best Regards

Here is the nswer for your first question.
Cisco ISE profiler collects a significant amount of endpoint data from the network in a short period of time. It causes Java Virtual Machine (JVM) memory utilization to go up due to accumulated backlog when some of the slower Cisco ISE components process the data generated by the profiler, which results in performance degradation and stability issues.
To ensure that the profiler does not increase the JVM memory utilization and prevent JVM to go out of memory and restart, limits are applied to the following internal components of the profiler:
Endpoint Cache—Internal cache is limited in size that has to be purged periodically (based on least recently used strategy) when the size exceeds the limit.
Forwarder—The main ingress queue of endpoint information collected by the profiler.
Event Handler—An internal queue that disconnects a fast component, which feeds data to a slower processing component (typically related to a database query).
For more information go through :
http://www.cisco.com/c/en/us/td/docs/security/ise/1-2/user_guide/ise_user_guide/ise_prof_pol.html#12624

How to handle large library, limited data plan

I've been using Itunes Match for about six months now, and I'm having problems...
I live rurally and so I use an AT&T hotspot with a 10 gig/month data plan for my phone, ipad, and desktop mac. My wireless connection speed is pretty good.
I have about 15000 tracks in my Itunes library, most not purchased through Itunes.
When I signed up for Match and went through the initial process, it took about 24 hours and used up about six gig, which caused a significant overage in my data plan. Consequently, I just use Match on my Mac and decided not to use it on my other devices because of the data limitations. My motivation to use it currently is as a back up for my music. I connect my phone to my mac manually to transfer some of my music to my phone.
I figured that the data overuse problem was a one time deal if I didn't use my other devices.
But recently, when I purchase a song from emusic or Amazon, the icloud processing image pops up after the download purchase is complete. Itunes will then start the process of sending data to Amazon, which was still going at 4 hours yesterday when I manually stopped it as I saw my data plan being used up. It seemed to restart the process of sending periodically and never got to the analyzing or returning data stages.
Now my recently purchased music shows up with both the Icloud processing symbol and a faded download icloud icon, one for each separate track. I can play the "processing" track, but Itunes won't allow me to add it to a playlist. Further, if I'm online with my hotspot, sometimes the regular Itunes Icon is visible, but at other times the icon with the thunderbold through it. I'm guessing this means it's streaming with the first icon, playing from my harddrive with the second.
So a couple of questions, and sorry for the length, I'm a first-time support user
1) Does it make sense to use Match with such a large library, and limited data plan?
2) "Where" is the music I've purchased - on my computer or in the cloud?
3) Should it take all day to send data to itunes, when the only updates to my library are songs I've deleted and a handful of new albums I purchased.
4) Am I using up my data plan when the regular Icloud Icon appears and I'm online? Is there a way to manually play from the hardrive to reduce use of my data plan? I turned off Match once and payed with a half-day sending and receiving session when I turned it back on.
4) Will I lose music if I unsubscribe from Match?
Thanks to anybody who has the inclination to respond to any of these questions!

This datasource sends After images in delta loads which is compatible with loading to a Std DSO only. You cannot load from this datasource directly to a cube.
You can check with business the number of years they would need history. If they need for 5 years, you could delete data older than that or Archive.
For GL, there would not be any changes to years that are closed for posting. There may be adjustments carried out for the previous fiscal year. I guess there would not be any changes to years prior to that. So archiving old data should not affect delta.

What phones can you still get the $15/month for limited data plan?

I am aware Verizon has switched over to the "Share Everything" plan. I think it's obsurd to charge $50 a month for only 1GB of data to share with the whole family. Anybody who pays for that, must be insane. But, that's not what I'm asking about. I have talked to my local Verizon store and they said I can keep my plan if I just want to upgrade my phone. There are 3 other phones on my plan, by the way. I have a basic Samsung Rogue that has unlimited texting and a shared amount of minutes for phone calls. I asked about changing my phone to a smart phone and they said I could have the $45/month plan, or whatever it was, for unlimited everything. That was just a little bit more than what I was willing to spend. I considered switching carriers and decided against it, as Verizon seems to have the best coverage. Then, it occured to me that they used to offer a limited data plan that my sister had before she got unlimited. I thought it was about $15 on top of what I already pay, but I'm not for sure. So, since I am still on my old plan, would it be possible to add the limited data package to my plan?? Also, if that is possible, what phones have an option to have a data plan? Can it just be any smart phone? I would prefer a touch screen phone.
All answers are appreciated. Thank you!!

Yes it is true. when you add a line you are required to change to the share everything plan.
<Moderator comment. This information is incorrect. Current customer are not required to switch to the Share Everything Plan if the customer deals with a corporate store or VZW directly through Customer Service.<
Message was edited by: Verizon Moderator

I have allowed my iTunes Match subscription to expire, because of a limited data plan so can't listen to music outside my house. My music files were removed from my computer and are inaccessible without renewing the subscription. How do I get them back?

I have allowed my iTunes Match subscription to expire, because of a limited data plan so can't listen to music outside my house. My music files were removed from my computer and are inaccessible without renewing the subscription. How do I get them back?

Hi,
I presume you deleted the original files as match would not have done so. Do you have a back up. If so, restore your music from that. If not, your will have lost all your music as this needed to be on your hard drive when you unsubscribed.
Jim

"Move Current Track Automation Data to Region" doesn't work for all

I have been using the 'Move Current Track Automation Data to Region' and while it works fine for some types of automation data like channel volume, pan and some plugin parameters, it doesn't work for all of them.
I haven't done exhaustive research into which parameters work and which don't, but most of the parameters for individual voices within Ultrabeat don't - which is annoying as that is what I was trying to use it for.
Any ideas about this, or workarounds?

OK, well an update on this in case anyone's interested.
With some further experimentation I have discovered that this problem did not exist in Logic 7 - ie you can move current track automation data for individual Ultrabeat voices to the region.
It's also possible to move automation data for individual Ultrabeat voices using 'Move All Track Automation Data to Region,' so I suppose this is a kind of workaround, though it can be annoying if you don't want to move all track automation data.
I'm now assuming this is a bug in Logic 8; is there any way to convert a Logic 8 project to work in Logic 7, as this along with the touch tracks bug is making working in Logic 8 very frustrating?

Acct assignment cat. of item not in user data; Inform system admin

Hi all,
We are on a SRM EBP 5.0 project and we are getting the following error when we try to create a purchase order from the purchasers login.
"Acct assignment cat. of item not in user data; Inform system admin"
The complete details of the screen shot are as follows:
The following error text was processed in the system DS1 : Acct assignment cat. of item not in user data; Inform system admin.
The error occurred on the application server lndnysap1_DS1_01 and in the work process 0 .
The termination type was: TH_RES_FREE
The ABAP call stack was:
Form: ABORT_PO of program SAPLBBP_PO_UI_ITS
Form: ADD_TO_MSG_LOG of program SAPLBBP_PO_UI_ITS
Form: ADD_TO_MSG_LOG_MULTI of program SAPLBBP_PO_UI_ITS
Form: SET_PRICING of program SAPLBBP_PO_UI_ITS
Form: DETERMINE_EXTERNAL_SCREEN of program SAPLBBP_PO_UI_ITS
Module: DETERMINE_EXTERNAL_SCREEN of program SAPLBBP_PO_UI_ITS
We did the following steps :
Created shopping cart- employer and WF triggered apprd. by manager.
Purchaser did "Carry Out Sourcing ", and if we say "Create Purchase Order", the PO gets created with a information message that "Incomplete purchase order 11/1 is created "
When we go to "Process Purchase Order" for the completion of the same. If we see Follow-on documents "Purchase Order Held" occurs.
In the tab Item Data details Pricing tab we get this error.
Do any of the SRM gurus can suggest us what to do?
In our admin logon it shows
"Server for pricing is not running. Start Server" occurs after every run of this process purchase order from the purchasers login, though our IPC is working fine.
Will be of great help if somebody replies soon.
Sincerely,
Sridhar.

Hi,
IPC has to be configured.
Please check the following threads :
https://forums.sdn.sap.com/click.jspa?searchID=211089&messageID=2714527
https://forums.sdn.sap.com/click.jspa?searchID=211089&messageID=2715019
Kind regards,
Yann

Storing & Printing Data in Regional Language in SAP

I am facing a requirement to Print data stored in English in both English and Regional Language. Does anyone know how this can be achieved? I have heard of some Transliteration software which can convert data in Regional language but do not have any idea as to how it works. Can anyone please provide me some information about this?
Another requirement is to store the data in Regional language in SAP database. I hope with Unicode this can be achieved. Can anyone please confirm about Unicode and provide some information about data storage in Regional Language?
Edited by: ashutosh deshpande on Jun 4, 2008 5:34 PM

My understanding is Unicode is required to have the ability to store Chinese characters in the system. You still need basis to load any other languages to the system. Here in the U.S. CRM came in DE & EN, we also loaded ES for Mexico facility.
The will convert all the SAP data. But for our material descriptions we had to manually (created a LSMW) to load Spanish descriptions in the material master.
Adding some confguration with text descriptions like reason codes is still a pain to do in both EN & ES when you want the description to be language specific.

ISE RBAC question

when configuring ISE administrator access and leveraging AD external identity source to authenticate users- Is there a way to define an identity source sequence so that if ISE loses connection to AD the user can still authenticate using a secondary method?
the question is strictly related to RBAC. Thx

You can't create/use an "identity store sequence" for the admin login. However, you don't really need to. At the login screen you can use the drop down menu and select "AD" or the "Internal Store" and either one would work.
Give it a try and let me know if you have any issues.
Thank you for rating helpful posts!

I have three different data base regions

Help is Greatly appreciated.
I have three different databases - development, QA and Production.
my requirement --I have to insert 20 new records into "scott.PERMANENT" table
2)In the Developemnt,QA both regions in the "scott.PERMANENT" table , 3 records are already presnet in the above new 20 records. 3)In the Production database , i dont have any data and have to insert all of the records.
So inorder to insert the data i have to use the same script in all the regions meaning i have to iclude all the 20 new records in the insert script ,but based on the region name it should check and insert those records .
could anyone please kindly give me an idea how to check the region name and insert.
Your help is kindly appreciated.

Hi,
975482 wrote:
Help is Greatly appreciated.
I have three different databases - development, QA and Production.
my requirement --I have to insert 20 new records into "scott.PERMANENT" table Don't create your own tables in Oracle-supplied schemas, such as SCOTT. Why not create your own schema?
2)In the Developemnt,QA both regions in the "scott.PERMANENT" table , 3 records are already presnet in the above new 20 records. 3)In the Production database , i dont have any data and have to insert all of the records.
So inorder to insert the data i have to use the same script in all the regions meaning i have to iclude all the 20 new records in the insert script ,but based on the region name it should check and insert those records .Use MERGE instead of INSERT. If you're using Oracle 10 or higher, then you don't even need a WHEN MATCHED clause; if you only have a WHEN NOT MATCHED clause, it will simply ignore the rows that you said to add but already exist.
If the columns have unique constraints, you can also INSERT all the data, and use an error logging clause
I hope this answers your question.
If not, post a complete test script that people can run to re-create the problem and test their ideas.
For example:
-- In all 3 databases, the permanent table looks like this:
CREATE TABLE permanent ...
-- In Production, where it has no rows, I could populate it like this:
INSERT INTO permanent ...
-- This is how I want the table to look in all 3 databases when everything is finished.
-- But in Development and QA, the table does have some rows already, like this:
TRUNCATE TABLE permanent;
INSERT INTO permanent ...
-- What statement(s) would get the table to the finished state regardless of how it starts?Always say which version of Oracle you're using (e.g., 11.2.0.2.0).
See the forum FAQ {message:id=9360002}

11.5.10.2 to R12.1.1 upgrade : AutoPatch warning : Product Data File $APPL_TOP/admin/*prod.txt does not exist for product

Hello Sir,
OS version : AIX 6.1
DB version : 11.2.0.3
EBS version : 11.5.10.2
As a part of 11.5.10.2 to R12.1.1 upgrade, I am applying merged patch (9179588:R12.AD.B) with 9477107:R12.AD.B and patch 7461070(R12.AD.B.1 upgrade driver).
I can see AutoPatch warning messages during adpatch session as below so I have not yet started this merged patch. Please suggest.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
drix10:/fmstop/patches/R1211AD/merge>adpatch
                     Copyright (c) 2002 Oracle Corporation
                        Redwood Shores, California, USA
                         Oracle Applications AutoPatch
                                 Version 12.0.0
NOTE: You may not use this utility for custom development
      unless you have written permission from Oracle Corporation.
Attention: AutoPatch no longer checks for unapplied pre-requisite patches.
You must use OAM Patch Wizard for this feature. Alternatively, you can
review the README for pre-requisite information.
Your default directory is '/fmstop/r12apps/apps/apps_st/appl'.
Is this the correct APPL_TOP [Yes] ?
AutoPatch records your AutoPatch session in a text file
you specify. Enter your AutoPatch log file name or press [Return]
to accept the default file name shown in brackets.
Filename [adpatch.log] : adpatch_u_merged_R12AD11.log
You can be notified by email if a failure occurs.
Do you wish to activate this feature [No] ?
Please enter the batchsize [1000] : 2000
Please enter the name of the Oracle Applications System that this
APPL_TOP belongs to.
The Applications System name must be unique across all Oracle
Applications Systems at your site, must be from 1 to 30 characters
long, may only contain alphanumeric and underscore characters,
and must start with a letter.
Sample Applications System names are: "prod", "test", "demo" and
"Development_2".
Applications System Name [FMSTEST] : FMSTEST *
NOTE: If you do not currently have certain types of files installed
in this APPL_TOP, you may not be able to perform certain tasks.
Example 1: If you don't have files used for installing or upgrading
the database installed in this area, you cannot install or upgrade
the database from this APPL_TOP.
Example 2: If you don't have forms files installed in this area, you cannot
generate them or run them from this APPL_TOP.
Example 3: If you don't have concurrent program files installed in this area,
you cannot relink concurrent programs or generate reports from this APPL_TOP.
Do you currently have files used for installing or upgrading the database
installed in this APPL_TOP [YES] ? YES *
Do you currently have Java and HTML files for HTML-based functionality
installed in this APPL_TOP [YES] ? YES *
Do you currently have Oracle Applications forms files installed
in this APPL_TOP [YES] ? YES *
Do you currently have concurrent program files installed
in this APPL_TOP [YES] ? YES *
Please enter the name Oracle Applications will use to identify this APPL_TOP.
The APPL_TOP name you select must be unique within an Oracle Applications
System, must be from 1 to 30 characters long, may only contain
alphanumeric and underscore characters, and must start with a letter.
Sample APPL_TOP Names are: "prod_all", "demo3_forms2", and "forms1".
APPL_TOP Name [drix10] : drix10 *
You are about to apply a patch to the installation of Oracle Applications
in your ORACLE database 'FMSTEST'
using ORACLE executables in '/fmstop/r12apps/apps/tech_st/10.1.2'.
Is this the correct database [Yes] ?
AutoPatch needs the password for your 'SYSTEM' ORACLE schema
in order to determine your installation configuration.
Enter the password for your 'SYSTEM' ORACLE schema:
The ORACLE username specified below for Application Object Library
uniquely identifies your existing product group: APPLSYS
Enter the ORACLE password of Application Object Library [APPS] :
AutoPatch is verifying your username/password.
The status of various features in this run of AutoPatch is:
                                           <-Feature version in->
Feature                          Active?   APPLTOP    Data model    Flags
CHECKFILE                        Yes       1          1             Y N N Y N Y
PREREQ                           Yes       6          6             Y N N Y N Y
CONCURRENT_SESSIONS              No        2          2             Y Y N Y Y N
PATCH_TIMING                     Yes       2          2             Y N N Y N Y
PATCH_HIST_IN_DB                 Yes       6          6             Y N N Y N Y
SCHEMA_SWAP                      Yes       1          1             Y N N Y Y Y
JAVA_WORKER                      No        1          -1            Y N N Y N N
CODELEVEL                        No        1          -1            Y N N Y N N
Identifier for the current session is 2987
Reading product information from file...
Reading language and territory information from file...
Reading language information from applUS.txt ...
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/eaaprod.txt
does not exist for product "eaa".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/abmprod.txt
does not exist for product "abm".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/evmprod.txt
does not exist for product "evm".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/ipdprod.txt
does not exist for product "ipd".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/zfaprod.txt
does not exist for product "zfa".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/zsaprod.txt
does not exist for product "zsa".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/cssprod.txt
does not exist for product "css".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/meprod.txt
does not exist for product "me".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/xnmprod.txt
does not exist for product "xnm".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/xncprod.txt
does not exist for product "xnc".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/xnsprod.txt
does not exist for product "xns".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/fptprod.txt
does not exist for product "fpt".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/okrprod.txt
does not exist for product "okr".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/cueprod.txt
does not exist for product "cue".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/ibaprod.txt
does not exist for product "iba".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/ozpprod.txt
does not exist for product "ozp".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/ozsprod.txt
does not exist for product "ozs".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/rlaprod.txt
does not exist for product "rla".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/vehprod.txt
does not exist for product "veh".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/rhxprod.txt
does not exist for product "rhx".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/imtprod.txt
does not exist for product "imt".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/ahmprod.txt
does not exist for product "ahm".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/okbprod.txt
does not exist for product "okb".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/okoprod.txt
does not exist for product "oko".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/xniprod.txt
does not exist for product "xni".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/jtsprod.txt
does not exist for product "jts".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/amfprod.txt
does not exist for product "amf".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/cunprod.txt
does not exist for product "cun".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
Reading database to see what industry is currently installed.
Reading FND_LANGUAGES to see what is currently installed.
Currently, the following language is installed:
Code   Language                                Status
US     American English                        Base
Your base language will be AMERICAN.
Setting up module information.
Reading database for information about the modules.
Saving module information.
Reading database for information about the products.
Reading database for information about how products depend on each other.
Reading topfile.txt ...
Saving product information.
Trying to obtain a lock...
Attempting to instantiate the current-view snapshot...
No baseline bug-fixes info available. Will attempt next time.
     **************** S T A R T   O F   U P L O A D ****************
Start date: Sun Aug 04 2013 18:45:12
0 "left over" javaupdates.txt files uploaded to DB: Sun Aug 04 2013 18:45:12
0 patches uploaded from the ADPSV format patch history files: Sun Aug 04 2013 18:45:12
Uploading information about files copied during the previous runs ...
0 "left over" filescopied_<session_id>.txt files uploaded to DB: Sun Aug 04 2013 18:45:12
     ****************** E N D   O F   U P L O A D ******************
End date: Sun Aug 04 2013 18:45:12
Enter the directory where your Oracle Applications patch has been unloaded
The default directory is [/fmstop/patches/R1211AD/merge] :
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

I checked under 11i $APPL_TOP/admin directory, I can see only one izuprod.txt file apart from applprod.txt.
drix10:/fmstop/fmstest/fmstestappl/admin>ls -lrt *prod.txt
-rwxr-xr-x    1 appltest dba          231650 Oct 30 2004 applprod.txt
-rwxr-xr-x    1 appltest dba            4966 Sep 21 2007 izuprod.txt
R12 code tree is newly installed so there is only applprod.txt
drix10:/fmstop/r12apps/apps/apps_st/appl/admin>ls -lrt *prod.txt
-rwxr-xr-x    1 appltest dba          226340 Jul 29 15:19 applprod.txt
Please suggest if I can ignore these warning to proceed with applying merged patch.

ISE - User limitation

Hi,
I know there is endpoint limitation of 2000, 10,000 and 100,000 concurrent endpoints, depending on deployment options. Is there any limit on maximum number of "users" ISE supports in these deployment options? All the design documents talk only about endpoint limitation, but nothing on user limitation? Is there any limitaion for concurrent number of users that is supported by ISE?
Also, on the license part, if a user logs in from an endpoint that is profiled (and profiling is used in authorization policy), does it consume 2 licenses, one for the endpoint and one for the user? Will it be both advance license or one base license for user and 1 advance license for endpoint?
Would appreciate any help.
REgards,
Mohan

Hi,
Please understand that the concurrent endpoint is the best way to determine the sizing requirements for ISE. The question you ask is valid but the point of setting endpoints is so all scenarios are covered, whether that is a deployment using only user authenticate devices or a mixture of headless devices with user based devices.
If a user connects through a device that is dynamically profiled, postured, or used any of the advanced on-boarding features you will consume one base and one advanced license.
Thanks,
Sent from Cisco Technical Support iPad App

Need to control page view to 20 from an html data source for a spry data repeating region

</style>
<script src="SpryAssetPan/SpryData.js" type="text/javascript"></script>
<script src="SpryAssetPan/SpryHTMLDataSet.js" type="text/javascript"></script>
<script src="SpryAssetPan/SpryPagedView.js" type=”text/javascript”></script>
<script type="text/javascript">

</script>
</head
<body>
<div id="wrapper">
<div spry:region="ds1">
    <div id="repeatOne" spry:repeat="ds1">
      <p>{Photo_2}<br />
      {Item}</p>
    </div>
Here you can find the file that I need to Create Paged View data set navigation
http://www.hohmangraphics.com/masterProductGuide/WrapAround_art/joestest_2.html

Thank you,
With some adjustments it worked, see source code below,
<script src="SpryAssetPan/SpryData.js" type="text/javascript"></script>
<script src="SpryAssetPan/SpryHTMLDataSet.js" type="text/javascript"></script>
<script language="JavaScript" type="text/javascript" src="SpryAssetPan/SpryPagedView.js"></script>
<script language="JavaScript" type="text/javascript">
var ds1 = new Spry.Data.HTMLDataSet("wrapAround_master2.html", "wrap2", {distinctOnLoad: true, sortOnLoad: "Item", sortOrderOnLoad: "ascending"});
var pv1 = new Spry.Data.PagedView( ds1 ,{pageSize: 10});
//-->
</script>
</head>
<body>
<div id="wrapper">
<p>
<input type="button" value="First" onclick="pv1.firstPage();" />
<input type="button" value="Prev" onclick="pv1.previousPage();" />
<input type="button" value="Next" onclick="pv1.nextPage();" />
<input type="button" value="Last" onclick="pv1.lastPage();" />
<br />
</p>
<div spry:region="pv1 ds1">
    <div id="repeatOne" spry:repeat="pv1">
      <p>{Photo_2}<br />
      {Item}</p>
    </div>

Can I use rebuild parity data in raid admin with these conditions?

4 disks in array, one went bad, replaced disk (same type of disk). Light on slot is red but in raid admin its says in event log that disk 2 is online, but when I select the drive to check info on that drive it says disk not installed. If I use the rebuild parity data function will it only rebuild the data from the 3 disks?
will disk 2 be recognized?
It seems I am getting conflicting info from raid admin and indicator lights on disk slot. I took the drive back out checked connections and rebooted the xraid.
I thought the array would rebuild itself when the new drive was inserted, am I missing something?
Thanks

Sometimes you have to go into the RAID utilities and use "make drive available" option.

ISE RBAC, limiting data to regional admins

Similar Messages

Maybe you are looking for