ISE Windows client does not complete Provisioning. I am trying to use SCEP and NDES

I'm setting a lab environment with ISE 1.2.0.899 patch 7 (Virtual), Windows server 2008 R2 (Virtual). I had follow instructions to make BYOD and get EAP-TLS certificates.
The first unsolved sittuation I have is with Windows Server. I can't figure out why the "Certificate Web Enrollment Service" and "Certificate Policy Web Enrollment Service" are not available when I enable Active Directory Certificate Service.
Anyway I set up all the rest of configuration on ISE. When I try a test the Guest Portal is displayed, the device is registered, and the Network Setup Assistant is started, but around 3/4 of the process it is aborted with an Error, but nothing explaining wath happened. The "More Information" link does not show anything.
Searching on the Windows Server I found this messages:
The Network Device Enrollment Service received an http message without the "Operation" tag, or with an invalid "Operation" tag
Network Device enrollment service cannot convert encoded portions of the client's http message, or the converter message is larger than 64k. invalid pointer
I suppose the problems should be on the WS but I don't have idea how to fix them.
I will appreciate your assistance. Thanks in advance
Daniel Escalante

Thank you ... I had read the document you indicate and review LabMinutes videos. Labminutes was the first source where I saw the "certificate enrollment web service" and "certificate enrollment policy web service".
After that I had review several sources (videos and books) and I can't find something that indicates why the indicated services are available some times and not in others.
Cisco documentation does not mention these services, but I understand they are required to allow funcionality with non domain devices ...
Regards.

Similar Messages

Data streaming between server and client does not complete

Using an ad-hoc app, data streaming between server
and client does not complete as it supposed to be.
The process runs well in solaris 5.8, however under 5.9
we have found the characters stream buffer length limitation
is around 900 to 950 characters (by default we are using 3072
characters).
Example:
- We are transfering HTML file, which will be displayed
in the App client, with buffer=3072, the HTML only displayed / transfered
as xxxxxxxx characters, but with buffer=900 the HTML is displayed properly,
in this case, the only problem that we have is the file transfer will
eventually longer than usual.
- There is another case, where we have to transfer information (data) as stream
to the client. A long data stream will not appear at all in the client.
Any ideas why the change between 5.8 and 5.9 woudl cause problems?
The current app-driver that we are using is compiled using Solaris 5.6,
if possible we would like to have use of a later version, which is compiled using Solaris 5.9, do you think this will probably solve our problem?
Thanks
Paul

Does this have anything to do with Java RMI? or with Java come to think of it?

Login Window: Screen does not refresh correctly after waking 10.7.2 iMac and MacBook.

I have a client who brought to my attention that when we wakes his iMac and MacBook after the screen dims or sleeps at login screen, that sometimes the screen does not refresh correctly and you must use the cursor to basically "clear the screen." I have witnessed this myself and elimiated all third party products and this still happens. I am starting to believe that is is a bug in 10.7.2. Has anyone witnessed this or have any suggestions on how to remedy? Thank you.

Thanks lynque. It turns out I did need a keychain repair, but that didn't fix the problem. I probably should have done this earlier, but I ended up unplugging all peripherals (2 firewire + 3 USB) then powered up without issue.
So I shut down, plugged in one at a time, and ran into the problem again after plugging in an external hard drive (WD My Book Essential). I repaired with disk utility, but the problem remained.
I then rebuilt the partitions with Disk Warrior, and now everything seems to work....

Trying to create itues account for children's school ipad and says does not meet min age. Tried to go back and fix bday as was put in incorrectly and still says "does not meet min age". How do I fix this?

I'm trying to create a new apple account for my daughter's school ipad. She put in her bday incorrectly and said "does not meet age requirements". We went back and put in her correct date (over 13) and still says "does not meet age requirement". How do I fix this??

The old rule of thumb was to keep 10-12 GB free. Any lower than that and you will start to have trouble. I was very close to that for a long time and never had any complaints. Now, Lion "encourages" 20% free space (on my newer 250 GB drive) so I try to keep it with more than 50 GB free.
Do you still have the original memory in that machine too? The metal plate you have to remove in the battery compartment also provides access to the RAM. Your machine will take 2 GB of RAM, possibly 3. You definitely want to max that out too.
Regardless, you definitely need a new hard drive. When Apple switched to PC components, they had to take a quality hit. These 2.5" notebook hard drives are not very reliable. I'm surprised your hard drive hasn't died by now. I usually get a new hard drive with every major OS upgrade. A $ 50 investment every couple of years is no big deal.
Unfortunately, you (and I) suffer from being an early adopter in 2006. Those 32-bit machines only accept 2 GB RAM (maybe 3) and are only 32-bit so they can't be upgraded to Lion. Because of this limitation, you won't see as dramatic an improvement as you would with a 2007 machine. If you run more than a couple of applications, your hard drive is always going to have to be doing some VM work. My 2006 machine has even lost its bluetooth. I gave it to my brother. My very similar 2007 Macbook is still running great.
So, you must get a new hard drive because your old one is likely on death's door. If you don't have at least 2 GB - get it. If you can't afford a new machine, you might want to consider an SSD. That might help mitigate your RAM limitations. You can spend from $ 100 to $ 350 and get a dramatic speed improvement.

I have an apple trackpad that shows that it is connected to Bluetooth but it does not respond. I have tried restarting the computer and turning the trackpad off and on but it will not work. Anyone have any ideas on what is going on here?

I have an Apple Trackpad that shows that it is connected with Bluetooth but it is not responding. I've tried restarting the computer, disconnecting and reconnecting and also turning the trackpad on and off but it simply does not respond. Does anyone have any idea on what is going on here?

There are reports of similar behavour but generally it is due to battery connections. Is the indicator light working steadily or does it blink or even not function. Here is the Apple document dealing with some of the problems.
http://manuals.info.apple.com/MANUALS/1000/MA1544/en_US/Magic_Trackpad_UG.pdf
Is your machine within the guarantee period or under Apple care. If so, return it to any apple retailer for examination and possible replacement.

Itunes does not open. I have tried to uninstall it and install it many times as i have seen on some communities but still keep on getting the Itunes was not install correctly. Please reinstall itunes. Error 7 (Windows 193). I have windows 7.

iTunes will not open, I keep getting the error 7 (windows error 193).
I have tried many recommendations, erasing folders, reinstalling it many time but nothing.
I have a windows 7 Lenovo ideapad.

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If you are running 64-bit Windows and the above steps haven't helped try installing the version of iTunes that can be downloaded from this support document. iTunes 12.1 for Windows (64-bit — for older video cards)
tt2

My Firefox window browser does not open at all. Tried everything. No window at all.

A few days back now, a message kept appearing that certificate had expired as 31/5/2011. I just cancelled that and went on to use the browser, Now the browser will not load any page at all.
Tried as many things as I dare.
Thank you for your help.

Hello everyone.
Hopefully this support article is what you need:
https://support.mozilla.com/en-US/kb/Firefox+will+not+start
In any case, you may be having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
Whenever you have a problem with Firefox, whatever it is, you should make sure it's not coming from one of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] and select ''Disable all add-ons''. If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and theme. You can troubleshoot plugins the same way.
If you want support for one of your add-ons, you'll need to contact its author.

HT201077 MY PHOTOS ON ICLOUD PHOTOSTREAM FROM MY windows 7 does not sync to my ipad. It used to do so but not now for some reason.

Hello,
I seem to be unable to sync my photots from my pc to Ipad.
This is very recent, as all used to be working well before.
The only change I have made to my systems is to use Dashlane.
Thank you for your suggestions

How to Transfer Photos from an iPad to a Computer
http://www.wikihow.com/Transfer-Photos-from-an-iPad-to-a-Computer
Importing Personal Photos and videos from your iOS device to your computer.
http://support.apple.com/kb/HT4083
iTunes: Frequently asked questions about viewing and syncing videos
http://support.apple.com/kb/HT2729
Also check out the Photo Manager Pro app.
https://itunes.apple.com/us/app/photo-manager-pro/id393858562
 Cheers, Tom

My iphone is not reconized on itunes but it is on my computer, althoug my computer can see it it says it does not have a drive. ive tried restarting my computer and my iphone. i have also tired other things that i read. i need it to sync but it cant.

syncing problems

That does happen. It depends on how hard the server is being hit, as well as the connection speed of your system. If you are on a windows system, you will want to disable any antivirus or firewall software during the download.

Messages beta, does not connect to Internet when trying to use uninstall, but I clearly am on the internet, any ideas?

I downloaded messages beta, and after trying video chat with my wife who was using iChat, I decided to uninstall, and every time I try to uninstall, I get a network problem saying that the messages beta uninstalled can't be downloaded as my computer isn't connected to the Internet, and I clearly am connected thru my wifi, any ideas how to get around this?

Hi,
Any version of iChat or the Message beta will have issues if you have two connections to the internet.
In fact iChat 4 in Leopard has the worst issues particularly if the computer you are on is Sharing the Internet with other devices (See System Preferences > Sharing > Internet Sharing)
iChat can just about manage in Text Chats to connect with other people.
In Video Chats and Audio Only chats and Screen Sharing ichat needs to be in "One Place"
With two IPs issued from a router for Wifi and Ethernet (See the differences in System Preferences > Network for Ethernet and Advanced Button > TCP tab for Wifi) means that iChat looks like it is in two places.
It is worse if you share the Wifi of a neighbour and use Ethernet yourself.
Using Ethernet may get your computer to access the DNS servers from your router more consistently so that Messages can find the place to download iChat 6 (There is evidence that both downloading Messages Beta and registering the Apple ID needs the correct or adequate DNS server info to work properly)
This address for the Message Beta download seems to hard to find for some DNS servers
http://swdlp.apple.com/cgi-bin/WebObjects/SoftwareDownloadApp.woa/wo/XeLd6tIQQ2O yGCki8irQgw/2.5
(This is the accompanying "Thank you for Downloading" page)
The point you make though, that a Ethernet connection may work better, is valid.
8:32 PM Sunday; May 13, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.3)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Why windows 8 does not recognize ipod touch model A1367 4th Generation?

Why window 8 does not recognize ipod touch model A1367 4th generation? and of course iTunes either.

See:
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
(it applies to win 8)
Run this to help if it identifies the cause
iTunes for Windows: Device Sync Tests
Have you tried on another computer to help determine if you have a computer or iPod problem?

Windows Vista does not see my Ipad but it always did prior to this attempt

Windows Vista does not see my Ipad, this is a new problem and I have not made any major changes to either my computer or to my Ipad. I am running Vista 64 as an operating system. I get the message that windows has an unrecognized USB device. I checked to see if the Apple Mobility software is running and it was, I reset it, turned off the computer, soft reset the Ipad but still no luck.

Hi,
Can you try a different USB port?
Check out this link just in case.
http://support.apple.com/kb/HT4049
Carolyn :-)

The mail could not be sent to the recipients because of the mail server failure. (Sending Mail using Account 1 (2013-04-30T16:36:52). Exception Message: Cannot send mails to mail server. (Mailbox unavailable. The server response was: 5.7.1 Client does not

Interesting db mail issue. If i click send test mail from sql mgmt studio, it works fine, but when i execute a SP to send a mail, it fails. One thing I noticed is that the "LastModified" column in the mail log shows the domain account when a test
mail was sent from mgmt studio, but show "sa" when the SP was used to send mail.
This is from SQL 2012, did not see this in sql 2008, looks like 2008 always used the service account. any ideas ?
Get this error:
The mail could not be sent to the recipients because of the mail server failure. (Sending Mail using Account 1 (2013-04-30T16:36:52). Exception Message: Cannot send mails to mail server. (Mailbox unavailable. The server response was: 5.7.1 Client does not
Thanks.
Ranga

Hi Ranga,
I also use SQL Server 2012. I send a test email through SQL Server Management and the last modified By “sa”.
If you used stored procedure to send a test email. Please use the command below:
EXEC msdb.dbo.sp_send_dbmail
@profile_name = 'Adventure Works Administrator',
@recipients = '[email protected]',
@body = 'The stored procedure finished successfully.',
@subject = 'Automated Success Message' ;
I can both send test email through SQL Server Management Studio and SP. Make sure you have the right profile. Since you could send test mail via SQL Server Management Studio, please try again to send it via SP.
Thanks.
If you have any feedback on our support, please click
here.
Maggie Luo
TechNet Community Support

IE11/Win 8.1 error 'Your client does not support opening this list in windows explorer'

I hoping someone might be able to help with this frustrating issue.
I work on a project where we are using various versions of on-line SharePoint (2007/O365). In order to quickly drag and drop folders we need to often open the document libraries by using the 'open in windows explorer view'.
Using the same device, on occassion this works. But often it gives a rather unhelpful message 'Your client does not support opening this list in Windows Explorer'.
I've searched for this issue over the net and confirm that the sites are added to the 'trusted' sites area and that the 'remember you credientials' is checked on logging in.However, the searches do not seem to apply to IE11/Win8.1 or on-line version of sharepoint
(the suggested hot fix is not suitable)
Only this morning, using the same device I was able, for a short while to open in explorer view, and then for no apparent reason, it began to display the error message. I had changed nothing regarding settings or even closed the browser.
Do you have any support/ideas/fixes on how to resolve this.
Many thanks
val

Hi Val,
sometimes an answer can be found on the internet by typing the error message from your computer into your favourite search engine.
eg.
http://www.bing.com/search?q=your+client+does+not+support+opening+this+list+in+windows+explorer&form=IE10TR&src=IE10TR&pc=HPNTDFJS
see
http://blogs.technet.com/b/asiasupp/archive/2011/06/13/error-message-quot-your-client-does-not-support-opening-this-list-with-windows-explorer-quot-when-you-try-to-quot-open-with-explorer-quot-on-a-sharepoint-document-library-in-office-365-site.aspx
follow the directions given above.... you need to add the domains to your Intranet sites list, not the Trusted sites list.
Perhaps you already have it mapped to your intranet zone....in which case make sure that you have unchecked "Enable Enhance Protected Mode" on the Intranet zone dialog in Internet Options.
If this is happening 'randomly' on client machines, then users are probably changing their internet security settings in Internet Options. Ensure they are accepting the default.... Internet Options>Security tab, click "Reset all zones to default".
Consult with your system administrators to find out if they are applying a custom security template for the Intranet zone... It may be removing the sharepoint domains from the client Intranet zone's domains lists.
HTH.
Rob^_^

SharePoint Foundation 2010 - Your client does not support opening this list with windows explorer when clicking Open with Explorer

when I tried to open document library in Windows explorer view by click 'Open with Explorer', it popped up “Your client does not support opening list with windows explorer”
OS: Windows Server 2008 Enterprise x64
IE: 9.0 32bit
webcient service is runing
HKLM\System\CurrentControlSet\services\WebClient\Parameters and changed the BasicAuthLevel to 2 instead of 1.
Anybody knows how?
Thanks.

Did you add your site to trusted site list?
http://sharepoint.stackexchange.com/questions/15098/your-client-does-not-support-opening-this-list-with-windows-explorer
--Cheers

ISE Windows client does not complete Provisioning. I am trying to use SCEP and NDES

Similar Messages

Maybe you are looking for