ISight Built-in camera on MacBook stopped working

Hello,
It seems that my iSight camera stopped working after the system update two days ago. I checked several solutions (like reset of SMC, creating other test account...) however this does not solve the issue. I also checked the system profiler and there is simply no iSight mentioned there (in the USB group). I don't have green screen when I launch the Photo Booth, it just shows the black frame with a white sign of no camera available. Same with Skype. I think the system (Leopard) just lost or does not recognize the camera anymore. Could someone come with an idea of fixing it please?
Thanks a lot in advance,
Message was edited by: Yashper

Welcome to Apple Discussions, Yashper
If you have not done so recently, repair permissions (not "verify") and try using your iSight again.
If your problem persists, be sure you have tried all the suggestions relevant to your system from How to Troubleshoot iSight.
If your iSight is still not working or visible in System Profiler as a USB device when you have selected the items shown in this picture,
download and reapply the Mac OS X 10.5.1 Update. Repair permissions before you run the updater and again immediately following the restart that finishes the update.
If none of these things fix your problem, (and if you have not made any other software or hardware changes that might be causing the problem), contact your retailer, Apple, or an Apple-Authorized Service Provider for service.
EZ Jim
PowerBook 1.67 GHz w/Mac OS X (10.4.11) G5 DP 1.8 w/Mac OS X (10.5.1)  External iSight

Similar Messages

  • HT201295 My isight built in camera is only turning on for few second on my MacBook Pro (13-inch, Late 2011 ) when I use any camera needed app. Please help me.

    My isight built in camera is only turning on for few second on my MacBook Pro (13-inch, Late 2011 with osx Yosemite) when I use any camera needed app. Please help me. Its getting a little annoying.

    If restarting Mac or reinstalling OS X does not correct this symptom, you likely have a hardware problem.  Contact Apple Support or an Apple Authorized Service Provider for service.
    Message was edited by: EZ Jim
    Mac OSX 10.10.1

  • ISight Built in Camera on iMovie09 and speed problem. Please Help

    Hello,
    I recently installed imovie09 after using imovie06 for quite sometime. I am getting two problems for now. First, when my videos from iPhoto got imported to iMovie, the audio is working fine but the actual clip is skipping. Is this normal? For me to able to fix it, I have to go to clip adjustment and do convert clip all the time. This is really annoying specially My video will consist at least 7 clips. Is there any other way? Second, I tried to use the isight built in camera so it can be only one clip. I noticed that when I was filming, my audio and my actual video is not on the right timing and when its time for me to save it and play it back, it was skipping also! I recorded 1 minute video and it will only play for 12 seconds! To top it off, it's not the first 12sec of the video but it's actually skipping through out the one minute clip I did.
    Can anyone please help me with this situation. I will very much appreciate it. I don't want to end up regretting that I upgraded to imovie09 only to find out things will be much complicated
    Thanks,
    Ashtoush

    Hello Ashtoush
    As you now know, iMovie '09 work differently than our iMovie HD 6.
    Although your iMovie '09 offers many improvements over the previous iMovie '08 version, the older version imports the same way your iMovie version does, i.e., differently from iMovie HD 6.
    User Jon Walker gives a complete explanation of your problem and offers workable solutions in this iMovie '08 forum thread:
      http://discussions.apple.com/thread.jspa?threadID=1134921
    It seems you will have to convert your existing clips using one of the methods detailed there.
    For future video clips, you may want to choose a different video capture device that is more compatible with your new iMovie so you will not need to do separate conversion.
    For Apple Help on importing into your new iMovie, take a look at the suggestions here:
      http://docs.info.apple.com/article.html?path=iMovie/8.0/en/11612.html
      http://docs.info.apple.com/article.html?path=iMovie/8.0/en/10359.html
      http://docs.info.apple.com/article.html?path=iMovie/8.0/en/11497.html
      http://docs.info.apple.com/article.html?path=iMovie/HD/en/im6.html
      http://support.apple.com/kb/HT3290
      http://docs.info.apple.com/article.html?path=iMovie/8.0/en/10331.html
      http://docs.info.apple.com/article.html?path=iMovie/8.0/en/9835.html
    EZ Jim
    G5 DP 1.8GHz w/Mac OS X (10.5.7) PowerBook 1.67GHz (10.4.11)   iBookSE 366MHz (10.3.9)  External iSight

  • Can the iSight built in camera be used with msn messenger?

    if so. how can i make it work?!?!

    Hello jellosaladE
    can the iSight built in camera be used with msn messenger?
    An iNtel Mac can use its built-in iSight "with" MSN Messenger.
    For how, see this thread:
      http://discussions.apple.com/thread.jspa?messageID=5087786&#5087786
    (Also at your other post of this same question:
      http://discussions.apple.com/thread.jspa?threadID=1134579)
    EZ Jim
    PowerBook 1.67 GHz   Mac OS X (10.4.10)    G5 DP 1.8  External iSight

  • My built-in  key board has stopped working how can i fix this?

    my built-in key board has stopped working all of a sudden how can i fix this?

    Did you spill any liquids on your keyboard?  If you are in the habit of eating and drinking while using your computer, the keyboard is probably dirty.  Use a can of compressed air or a vacuum hose to remove the debris underneath the key.  If that does not work, you may actually have a hardware issue.
    If you Apple Care, call them and get a case number.  Otherwise, take the computer to an Apple store or an AASP.  Whichever is more convenient for you.  Liquid damage is not covered under Apple's standard 1 year warranty or Apple Care.
    NOTE:  If you are out of warranty and purchased the computer with a credit card, discuss the warranty issue with the credit card company which you purchased the computer with.   They are the only ones who can at this point cover the computer after it goes out of warranty with the manufacturer (Apple).
          If you have Homeowners insurance, place a claim with them.
    How to remove and clean your Macbook Pro Keyboard 
    Cleaning Macbook keys after a spill

  • How to make pictures by the built-in camera of MacBook  Pro?

    I don't succeed in making pictures with the built-in camera of  MacBook Pro.
    Neither the program i-Photo can be downloaded.
    Both items worked perfect when I bought the laptop  a couple of years ago.
    What went wrong?

    You can take pictures with "PhotoBooth".
    You can use all kind of picture effects as well.

  • Hi i want to ask a question ok my MacBook stop working and all i want to know is why and how cand i get it repair

    I want to know why did my macbook stop working i can not login

    Considering that you're still running OS 10.5.8, that must be a pretty old MacBook. Instead of getting into an in-depth back and forth diagnostic discussion, I'd suggest bringing into an Apple Store for a checkout. Since repairs aren't cheap (if that's what's needed), you may end up simply replacing it. But does it not work even when plugged into the power adaptor?

  • Why does my MacBook stop working when I tr to plug in my iPad to do some file syncing?

    Why does my MacBook stop working when I try to plug in my iPad to do some file syncing? This is the second time I have had it happen to my MacBook. The computer just shuts down and cannot be restarted. When I plug it into the charger I get a faint Green light where it plugs into the MacBook. When I took the computer into my local Mac store last time this happened (Nov 2012) they reckoned they couldn't find anything wrong with it. Has any body else encountered a similar issue?

    That would be a filter, yes. Didn't know Verizon handed out phone/DSL wall split filters. I would honestly take a look at the physical jack it is connected to for corrosion or lose connections as I doubt the filter is bad out of the box. Anyways, what was the original problem you had with the Phone and DSL that prompted Verizon to send out a filter?
    ========
    The first to bring me 1Gbps Fiber for $30/m wins!

  • Camera RAW has stopped working - says requires that a qualifying product has been opened at least once. I am a fully up to date CC 2015 subscriber. It was working fine previously.

    Camera RAW has stopped working.  Says CR editing is not enabled.  Requires a qualifying product opened at least once.  PC CC, Bridge and Lightromm all work.

    We're only up to CC 2014 right now. 
    Are you using Bridge to open up the RAW?

  • My camera connection kit stopped working after I upgraded to  ios5

    My camera connection kit stopped working after I upgraded to ios5. If I plug it in to my iphone I get a message saying it is not recognised, but when I plug it into the ipad it does nothing at all. I've tried resetting it, but that makes no difference.
    I have an ipad 1 which I bought because it had lots of storage. I'm going on holiday soon, and I want to be able to upload my holiday photos to my ipad while I'm away.
    Any suggestions?

    Actually this sounds the same problem I have on my iPad2.
    I use a cheap copy of the CCK which I got off eBay.
    It worked great when fitted with a 16gb SD card, but since I upgraded to 5.01 it has stopped working.
    Sorry, no solution at this point but it worked on 4.3.3 but not on 5.01.
    I'll keep on looking, was considering a proper CCK thinking the cheapmversion may be drawing too much current, but it sounds like that might not work either.

  • Why did my camera connection kit stop working after updating to iOS 6.0.1?

    Camera connection kit stopped working on ios6.01 updated phone. Same camera kit works on the iPhone that I did not update. Why does it not work with 6.0.1?

    The same story. No 3G after updating to 6.1.  Told my daughter temporarily not to do an update on her iPad with 6.01. We've exchanged SIMs. I inserted her SIM in my iPad - 3G appeared immediately. And my SIM in her iPad with ios 6.01 also WORKS FINE. We use the same provider - Megafon Moscow. After attempting to revert SIMs to original configuration, 3G disappeared on my iPad again. Don't know what's going on with SIM during the update to 6.1

  • My camera and flashlight stopped working suddenly, only my front facing camera works. The camera app freezes and has to be ended every time. What the heck...help?

    My camera and flashlight stopped working suddenly, only my front facing camera works. The camera app freezes and has to be ended every time. What the heck...help?

    Hi JDValentine,
    If you are having issues with a camera on your iPhone, you may find the Camera troubleshooting in the following article helpful:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Regards,
    - Brenden

  • Why won't that apps that weren't built into my iPod randomly stop working?

    Why won't that apps that weren't built into my iPod randomly stop working?

    Try a reset:
    Hold the home and power buttons at the same time until the Apple boot logo appears.

  • My built-in camera on Macbook Air is not working

    Camera on Macbook Air has become disabled. All applications requiring camer (FaceTime, PhotoBooth, etc) state that "there is no connected camera".

    This one stumped me for a while too. Sometimes it would work (usually after a restart) but then would stop working some indeterminant amount of time later. I think another process might be using the camera.
    Go to Terminal.app and type in sudo killall VDCAssistant (and enter your admin password; alternatively find the VDCAssistant processing Activity Monitor and stop it that way). This will stop other processes that might be reserving the camera.

  • HT2090 My isight/ built-in camera is not working

    I went to the Apple troubleshooting sight and the issue is that it is not recognized under the USB section in the system profiler. The camera is not recognized on all applications and I already tried doing a software update, restarting it, and resetting the SMC. It still doesn't work. No green light or anything. Any other suggestions on how to fix it? Is it possibly linked to the DVD drive I just got replaced in the computer? (I don't see how they'd be related, but whatever).

    if the camera was working fine before the DVD drive replacement, and after you got it back it stopped working, that is an indication that something wrong happened during the repair and the shop needs to fix it free of charge.

Maybe you are looking for

  • Print Second page in SAP script

    Hi , I want to print second page in my sapscript.first page has Header,MAIN,footer windows. Second page has only one window where i need to print some terms and conditions those are hard coded in script. Could you please let me know how i can print s

  • HP Drive Encryption

    Доброго время суток. У меня вопрос , как в программе исправить  БАГ ? Извиняюсь за ломаный Англиский (перевожу переводчиком). Good time of day. My question is , how do I fix a BUG ?Sorry for broken English (translations by the translator).

  • Setting a proper domain name and adding hosts for quick name resolution

    I have 3 other computers in my house. Two run linux at this time. I want to do 2 things. Right now my machine says Steve.local for its hostname right? I want to change that so it reads Steve.mydomain.net. Am I correct that I need to sudo /etc/hostcon

  • Significant performance degradation after TM restore

    I recently installed a new internal HD in my iMac. While everything seems to work from a hardware standpoint, the performance has significantly degraded. Specifically, the screen locks up from time to time for several seconds. I think I have isolated

  • Change item status booked to awaiting shipping

    Hi all, How to change the item status from booked to awaiting shipping in OM(sales order). Thanks, bala