Isn't unicode check defaulted in ECC 6.0 ?
I see a checkbox called unicode check box in the attributes when I create the ABAP program. This check is to make sure that during sytanx check the system will perform unicode check.
Now, I had an assumption that this check box is used only when you are executing programs on lower level of SAP like SAP 4.6C or 4.7 to ensure that programs are checked for unicode check.
But, I see that in ECC 6.0 also if you don't use this check box the system will bypass the unicode check. I thought that in ECC 6.0 , unicode check is done by default, but it does not sound like that .
Can someone throw some light on this ?
Regards,
Rajesh.
Hello Rajesh
I do not think so. You could do the following test on your system (Unicode or non-Unicode?):
Write a simple ABAP report and try move data between a structured and an unstructured variable, e.g.:
DATA: gd_string TYPE string. " unstructured, C-container
DATA: gs_kna1 TYPE kna1.
SELECT SINGLE * FROM kna1 INTO gs_kna1.
gd_string = gs_kna1. " should give Unicode error -> use instead cl_abap_container_utilities class
Regards
Uwe
Similar Messages
-
Can UCCHECK be performed on already UNICODE migrated system during ECC upgr
Hi there,
Can UCCHECK be performed on already UNICODE migrated system during ECC upgrade?
If NO, why? What is the technical reason?
PrakashHi,
first unicode means
Unicode is a 16-bit code to represent universal character set, which is used to facilitate a better exchange of data between different systems.
for uncheck
The transaction UCCHECK is used to find Unicode related issues. You can use transaction UCCHECK to examine a Unicode program set for syntax errors without having to set the program attribute "Unicode checks active" for every individual program. From the list of Unicode syntax errors, you can go directly to the affected programs and remove the errors. It is also possible to automatically create transport requests and set the Unicode program attribute for a program set.
why you are checking second time.
Regards,
Madhu -
Attribute 'Unicode checks active'
Hi,
we just made an upgrade from 4.6 to ECC 6.0.
The unicode conversion check and the unicode conversion itself is done.
Each Abap program that has the attribute 'Unicode checks active' not checked ( off ), is causing a syntax error in the new system. Up till now we manually adjusted each attribute of each program, just to get the basic business transactions running.
My question is: what went wrong, and what is the best way of solving all this errors at once ?
Thanks in advance,
RolfRolf,
I'm using ECC 6.0. I tried to do what you suggested for setting unicode flag active for a bunch of programs. Unfortunatelly, I'm bumping in the following problem:
I run UCCHECK and I get "green light" for some objects that don't have unicode flag active yet. So I click on the correspondent line and after on "Set Unicode Attribute" button. I get a pop-up saying that unicode is set active and program is written into a transport request... i click on OK. Another pop-up comes up. "Set Unicode Flag?", I click on Yes. Then, another pop-up comes up saying "Set Flag for Error-Free Programs Only?". I tried Yes, and I get this information message "The current system is not the original system". I tried also NO, but same message is shown.
Any idea on how to get it right?
Thanks. -
Regarding updating unicode check flag to all z* programs at once
Hi all,
We are upgrading from 4.7 to ecc 6.0 ,
we have created one pilot server where we have installed ecc 6.0 and all prduction data is copied on it .
OUR basis team has done that process and it is done with unicode check active ,
But all Z programs such as few customs programs are still non-unicode as they are old programs so want
to update unicode check flag which is pressent in attributes of program .
MANUALly you can do for each program and activate that i know ,but how to do it all at once .
Because when we Excecute UCCheck we get all programs which are nonunicode , in which it shows that programs The system found no Unicode syntax errors . whichneeds to be just do unicode check flag active and activate the program .
How that can be done at once all .
Regards
Deepak.Hi ,
My problem is solved ....
i found that after executing UCCHECK transaction code ,in display you will find one button on rigth side
"set unicode attribute" . after selecting no of programs at once we can press that butoon .
The Unicode flag is set for the selected programs. The programs are
written into interactively selectable transport requests and generated.
You must later release the transport requests.
I hope this will be helpfull to all.
Regards
Deepak. -
Hi All,
I want to know about "Unicode Check Active" in ABAP Editor Program Attributes.I don't know anything about this.I want to know
What is Unicode Check Active.
How to Activate this Check Box.
what is meant by Code Pages.
What is UTF-8 UTF-16 & UTF-32.
What is the Use of It.
In ABAP Code the Unicode Check Doesn't Support the some syntax like Open Data set and Describe Lines like that what are all the syntax in ABAP it doesn't support.
Can anybody give me the clear idea about this.So, it will be very helpful to me.This is very urgent.Surely i will reward more points.
Thanks,
Swapna.Hi,
Unicode Check is one of the latest enhancement in SAP which has been done so as to provide SAP product in almost all the language that is spoken in the world.
A program as to be made Unicode check Active in its attribute so that it can be used in Unicode enabled SAP system.
what is unicode?
From Release 6.10, ABAP supports multi-byte coding for characters in Unicode. Prior to Release 6.10, ABAP used only character sets that were based on single-byte codes such as ASCII and EBCDIC or double-byte codes, such as SJIS and BIG5.
what is unicode enabled program?
A Unicode-enabled ABAP program is a program in which all Unicode checks are effective. Such a program returns the same results in a non-Unicode system as in a Unicode system .In order to perform the relevant syntax checks, you must activate the Unicode flag in the screens of the program and class attributes.
Type of errors in unocode check.
This switch to Unicode affects all statements where an explicit or implicit assumption is made about the internal length of a character. If you use these statements in a program that is designed to exploit the Unicode capabilities of the runtime environment, they must be checked and changed if necessary. Once a Unicode-enabled program has been changed accordingly, it behaves in the same way in both Unicode and non-Unicode systems. You can develop programs in a non-Unicode system (NUS) and then import them into a Unicode system
UNICODE CHECK ACTIVE:
You need to use the transaction UCCHECK.
The report documentation is here
ABAP Unicode Scan Tool UCCHECK
You can use transaction UCCHECK to examine a Unicode program set for syntax errors without having to set the program attribute "Unicode checks active" for every individual program. From the list of Unicode syntax errors, you can go directly to the affected programs and remove the errors. It is also possible to automatically create transport requests and set the Unicode program attribute for a program set.
Some application-specific checks, which draw your attention to program points that are not Unicode-compatible, are also integrated.
Selection of Objects:
The program objects can be selected according to object name, object type, author (TADIR), package, and original system. For the Unicode syntax check, only object types for which an independent syntax check can be carried out are appropriate. The following object types are possibilities:
PROG Report
CLAS Class
FUGR Function groups
FUGX Function group (with customer include, customer area)
FUGS Function group (with customer include, SAP area)
LDBA Logical Database
CNTX Context
TYPE Type pool
INTF Interface
Only Examine Programs with Non-Activated Unicode Flag
By default, the system only displays program objects that have not yet set the Unicode attribute. If you want to use UCCHECK to process program objects that have already set the attribute, you can deactivate this option.
Only Objects with TADIR Entry
By default, the system only displays program objects with a TADIR entry. If you want to examine programs that don't have a TADIR entry, for example locally generated programs without a package, you can deactivate this option.
Exclude Packages $*
By default, the system does not display program objects that are in a local, non-transportable package. If you want to examine programs that are in such a package, you can deactivate this option.
Display Modified SAP Programs Also
By default, SAP programs are not checked in customer systems. If you also want to check SAP programs that were modified in a customer system (see transaction SE95), you can activate this option.
Maximum Number of Programs:
To avoid timeouts or unexpectedly long waiting times, the maximum number of program objects is preset to 50. If you want to examine more objects, you must increase the maximum number or run a SAMT scan (general program set processing). The latter also has the advantage that the data is stored persistently. Proceed as follows:
Call transaction SAMT
Create task with program RSUNISCAN_FINAL, subroutine SAMT_SEARCH
For further information refer to documentation for transaction SAMT.
Displaying Points that Cannot Be Analyzed Statically
If you choose this option, you get an overview of the program points, where a static check for Unicode syntax errors is not possible. This can be the case if, for example, parameters or field symbols are not typed or you are accessing a field or structure with variable length/offset. At these points the system only tests at runtime whether the code is sufficient for the stricter Unicode tests. If possible, you should assign types to the variables used, otherwise you must check runtime behavior after the Unicode attribute has been set.
To be able to differentiate between your own and foreign code (for example when using standard includes or generated includes), there is a selection option for the includes to be displayed. By default, the system excludes the standard includes of the view maintenance LSVIM* from the display, because they cause a large number of messages that are not relevant for the Unicode conversion. It is recommended that you also exclude the generated function group-specific includes of the view maintenance (usually L<function group name>F00 and L<function group name>I00) from the display.
Similarly to the process in the extended syntax check, you can hide the warning using the pseudo comment ("#EC *).
Applikation-Specific Checks
These checks indicate program points that represent a public interface but are not Unicode-compatible. Under Unicode, the corresponding interfaces change according to the referenced documentation and must be adapted appropriately.
View Maintenance
Parts of the view maintenance generated in older releases are not Unicode-compatible. The relevant parts can be regenerated with a service report.
UPLOAD/DOWNLOAD
The function modules UPLOAD, DOWNLOAD or WS_UPLOAD and WS_DOWNLOAD are obsolete and cannot run under Unicode. Refer to the documentation for these modules to find out which routines serve as replacements.
Reward Points if found helpfull..
Cheers,
Chandra Sekhar. -
Question Regarding Unicode Checks
Hi Abapers,
What is Need of Transaction:UCCODE, what are the things which i need to check after giving the program name , and executing , what sholud be the out come ... negative means what will happen....
positive means what will happen.....
With Regards
Bhaskar Rao.MHi,
Transaction code is UCCHECK.
ABAP Unicode Scan Tool UCCHECK
You can use transaction UCCHECK to examine a Unicode program set for syntax errors without having to set the program attribute "Unicode checks active" for every individual program. From the list of Unicode syntax errors, you can go directly to the affected programs and remove the errors. It is also possible to automatically create transport requests and set the Unicode program attribute for a program set.
Some application-specific checks, which draw your attention to program points that are not Unicode-compatible, are also integrated.
Selection of Objects:
The program objects can be selected according to object name, object type, author (TADIR), package, and original system. For the Unicode syntax check, only object types for which an independent syntax check can be carried out are appropriate. The following object types are possibilities:
PROG Report
CLAS Class
FUGR Function groups
FUGX Function group (with customer include, customer area)
FUGS Function group (with customer include, SAP area)
LDBA Logical Database
CNTX Context
TYPE Type pool
INTF Interface
Only Examine Programs with Non-Activated Unicode Flag
By default, the system only displays program objects that have not yet set the Unicode attribute. If you want to use UCCHECK to process program objects that have already set the attribute, you can deactivate this option.
Only Objects with TADIR Entry
By default, the system only displays program objects with a TADIR entry. If you want to examine programs that don't have a TADIR entry, for example locally generated programs without a package, you can deactivate this option.
Exclude Packages $*
By default, the system does not display program objects that are in a local, non-transportable package. If you want to examine programs that are in such a package, you can deactivate this option.
Also Examine Modified SAP Programs
By deafult, SAP programs are not checked in customer systems. If you want to check SAP programs that were modified in customer systems (see transaction SE95), you can activate this option.
Maximum Number of Programs:
To avoid timeouts or unexpectedly long waiting times, the maximum number of program objects is preset to 50. If you want to examine more objects, you must increase the maximum number or run a SAMT scan (general program set processing). The latter also has the advantage that the data is stored persistently. Proceed as follows:
- Call transaction SAMT
- Create task with program RSUNISCAN_FINAL, subroutine SAMT_SEARCH
For further information refer to documentation for transaction SAMT.
Displaying Points that Cannot Be Analyzed Statically
If you choose this option, you get an overview of the program points, where a static check for Unicode syntax errors is not possible. This can be the case if, for example, parameters or field symbols are not typed or you are accessing a field or structure with variable length/offset. At these points the system only tests at runtime whether the code is sufficient for the stricter Unicode tests. If possible, you should assign types to the variables used, otherwise you must check runtime behavior after the Unicode attribute has been set.
To be able to differentiate between your own and foreign code (for example when using standard includes or generated includes), there is a selection option for the includes to be displayed. By default, the system excludes the standard includes of the view maintenance LSVIM* from the display, because they cause a large number of messages that are not relevant for the Unicode conversion. It is recommended that you also exclude the generated function group-specific includes of the view maintenance (usually L<function group name>F00 and L<function group name>I00) from the display.
Similarly to the process in the extended syntax check, you can hide the warning using the pseudo comment ("#EC *).
Applikation-Specific Checks
These checks indicate program points that represent a public interface but are not Unicode-compatible. Under Unicode, the corresponding interfaces change according to the referenced documentation and must be adapted appropriately.
View Maintenance
Parts of the view maintenance generated in older releases are not Unicode-compatible. The relevant parts can be regenerated with a service report.
UPLOAD/DOWNLOAD
The function modules UPLOAD, DOWNLOAD or WS_UPLOAD and WS_DOWNLOAD are obsolete and cannot run under Unicode. Refer to the documentation for these modules to find out which routines serve as replacements.
Regards,
Sruthi -
Free item field checked defaultly in PO for one specific vendor
Hi,
If we always send a free PO to a vendor, is there any place to configure that once we create PO to this specific vendor, the free item field is checked defaultly?
Some posts on the web indicated that they succeeded in doing this by setting in vendor master, but I cannot find the field.
Where to achieve this function?
Thanks!
WesleyHi,
try to maintain a free goods condition in tcode MBN1 with
Discount type NR00 and make this article as an Additional material free
goods which will be procured free of cost on purchase of some other
article. The system will not consider the Net price value maintained in
the purchasing view of the article master and you would find that the
net price is ZERO for this free item in the Purchase order.
Regards,
Edit -
How to do the Unicode Check for Business Objects ?
Hi all,
How to do the Unicode Check for Business Objects ?
Note: All business Objects are stored in BOR (Business Objects Repositary)
Thanks in advance
Sri..Hi..
i have used the UCCHECK transaction for some business Objects
For some business objects it is showing that No Unicode Errors found Ex: Z00MARA
and for Business Objects it showing the message like : There is no program corresponding to this selection.
Why system is showing like this ?
Thanks in advance
Sri.. -
Hi,
I have used this stmt (DESCRIBE FIELD GT_TLINE LENGTH fle1 )
to get the length of fields but i am getting errors based on unicode check like
describe length can only be in byte mode or character mode.
My program is about converting the output of smartform to pdf and send as an attachment to email.
Can any one answer me on this issue.
Thanks,
lalitha.Hi,
For this u shud use DESCRIBE FIELD GT_LINE LENGTH fle1 in BYTE/CHARACTER MODE as per the new guidelines for Unicode check
The description of BYTE/CHARACTER MODE says like this :
The length directly used by the data object dobj in the memory is determined in bytes or characters depending on the addition MODE and is assigned to the data object ilen. The data type i is expected for ilen.
You must specify the addition MODE in Unicode programs. The variant with the addition IN BYTE MODE determines the length of the data object dobj in bytes. The variant with the addition IN CHARACTER MODE determines the length of the data object dobj in characters. When using IN CHARACTER MODE, the data type of dobj must be flat and character-type. You can only specify IN BYTE MODE for deep data types and in this case, the length of the reference (8 bytes) is determined.
In non-Unicode programs and in releases prior to 6.10, LENGTH can be used without the addition MODE. In this case, the addition IN BYTE MODE is used implicitly
Note
For data objects with a fixed length, the length is determined that is specified during the creation of the data object. To determine the the used length of character-type data objects without counting the trailing spaces, you can use the built-in function strlen.
Regards,
Himanshu -
What is unicode check in sap?
what is unicode check in sap?
Hi
http://help.sap.com/saphelp_nw2004s/helpdata/en/79/c55458b3dc11d5993800508b6b8b11/content.htm
Check for the following errors
object must be a character type data object
In Unicode, the addition IN BYTE/CHARACTER MODE must be specified
The access and storage modes ACCESS and MODE must be specified
var1 and var2 are not mutually convertible. In Unicode programs must have the same type/structure
TRANSLATE CODE PAGE/NUMBER FORMAT not allowed
The data type/structure objetcs in 'ADD' statement should have same type
The data type/structure "&1" and "&2" are should have same type
IN TEXT MODE the addition ENCODING must be specified
Structures "&1" and "&2" are not mutually convertible.
The ENCODING addition is not valid in BINARY mode
The IGNORING CONVERSION ERRORS addition is not valid in BINARY mode
The REPLACEMENT CHARACTER addition is not valid in BINARY mode
Check for the Customer code pages and use the tcodes SCOV and SPUMG .
Please Go through these Documents,
Very good document:
http://www.doag.org/pub/docs/sig/sap/2004-03/Buhlinger_Maxi_Version.pdf
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d37d1ad9-0b01-0010-ed9f-bc3222312dd8
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/589d18d9-0b01-0010-ac8a-8a22852061a2
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f8e316d9-0b01-0010-8e95-829a58c1511a -
Hi All ,
Is there any way to have the unicode check feature i.e.UCCHECK in R/3 4.6C environment ? please let me know if anyone has any clue.
Regards
YogeshHello Yogesh
The report Peter mentioned is <b>RSUNISCAN</b>. The output of the report looks like this:
ABAP Unicode Scan
This program finds coding that does not yet correspond to the restrictive Unicode syntax
(Based on the ABAP Unicode design of June 1999) It finds most of the affected coding, but not all of it.
The main aim of the program is to give you an idea of the kinds of coding that need to be changed for Unicode.
It generates error messages for code that will have to be changed later, and for which there are means in 4.6B for doing so
It generates warnings for cases that will have to be changed later, but where the required statements will
not be avilable until Release 5.0. ...
Regards
Uwe -
Getting errors while conversion of ABAP program into Unicode check
Hi,
I changed the one ABAP program for some requirement and try to save it, it is giving error that the program is not unicode compatible.I set the unicode checks active box under Attributes and again activate it .It is not allowing to concatenate the two variables which is declared as follows :
constants: c_tab type x value '09', "tab character
c_cr type x value '0D'. "carriage return character
I tried to use field symbols but still giving error (code after change)
constants: c_tab type x value '09', "tab character
c_cr type x value '0D'. "carriage return character
field-symbols : <f_c_tab> type any,
<f_c_cr> type any.
Assign c_tab to <f_c_tab> CASTING type c.
Assign c_cr to <f_c_cr> CASTING type c.
error :The length of "C_TAB" in bytes must be a multiple of the size of a Unicode character (regardless of the size of the Unicode character).
pls guide me so that I can cancatenate the c_tab and c_cr variablesHi,
Tab Character ----->Data: tab type c value cl_abap_char_utilities=>HORIZONTAL_TAB.
Carraige Return---->Data : cr(2) type c value cl_abap_char_utilities=>cr_lf..
You will not be able to use the concatenate statement for hexadecimal variables in unciode system.
Try using the above equivalent character variables. In unicode system avoid using hexadecimal variables wherever possible
Regards,
lakshman. -
Check default user file creation mask on installing 11g RAC
Check default user file creation mask
Node Name Available Required Comment
bnl11237dat02 0027 0022 failed
bnl11237dat01 0022 0022 passed
Result: Default user file creation mask check failed
----------------------------------------------bash_profile
# .bash_profile
# Get the aliases and functions
if [ -f ~/.bashrc ]; then
. ~/.bashrc
fi
# User specific environment and startup programs
PATH=$PATH:$HOME/bin
export PATH
ORACLE_BASE=/u01/app/oracle
export ORACLE_BASE
if [ $SHELL = "/bin/ksh" ]; then
ulimit -p 16384
ulimit -n 65536
else
ulimit -u 16384 -n 65536
fi
umask 022
if [ -t 0 ]; then
stty intr ^C
fi
I am getting this error when running ./runcluvfy.sh stage -pre crsinst -n bnl11237dat01.youview.tv,bnl11237dat02.youview.tv -fixup -verbose > ~oracle/run_pre_install_cluvfy.out.11
Please can I know what is causing umask check failsFolks,
Hello. I follow the document "Oracle Grid Infrastructure Installation Guide 11g Release 2 (11.2) for Linux E22489-04" and do the following:
[root@rac1 /]#echo $SHELL
Output: /bin/bash
This means we need to edit Bash shell file .bash_profile.
[ora11g@rac1 ~]$vi /home/ora11g/.bash_profile
Add this line: umask 022
Then I save the file .bash_profile and reboot OS.
Then I run the following command:
[ora11g@rac1 grid] $ ./runcluvfy.sh stage -pre crsinst -n all -r 11gR2 -orainv ora11g -fixup -fixupdir /mydir -verbose
But the reusult is the same. The issue is not solved as follows:
Check default user profile creation mask:
Node Name: rac1
Available: 0002
Required: 0022
Comment: failed
Do any folk understand how to solve VM rac1 user profile creation mask problem ?
Thanks. -
Unicode check for hr related prog, infotypes
hi,
Is there any function module to check the unicode for programs, infotypes, function modules, ldb, and user exits. If yes what is the function module. If it is no tell me how to solve this issue.
thanks & regards,
Sekhar.Hi,
I want to get the errors when i am passing the program name or function group or user exit by passing these into UCCHECK tcode by writing a program if it is not unicode checked.
thanks & regards,
Sekhar. -
Hello All,
Is it possible to have a unicode check in BW?
Rgds
PriyankaHi Priyanka,
The Unicode version of mySAP BW 3.5 is fully available with SAP Netweaver within "unrestricted shipment", for the conversion of existing BW installations please have a look at note 543715.
SAP note 643813 has a collection of all relevant SAP notes concerning Unicode-based SAP BW installations.
Check this SAP note 588480 as well...
Regards,
Kishore
Maybe you are looking for
-
Mov file created in iDVD, iMovie or Quicktime doesn't open anymore in 10.10
Hi, Back when I had an iBook 10.4, I worked on video. Using iMovie and iDVD, I made some creations which I burned on a DVD as well as changed into .mov format. Those days have gone. Later computers didn't have iDVD or iMovie anymore, or what was left
-
NetBoot issue macbook pro 13" i5 2.3Ghz
Hi, Actually i work on deployment for os x via netboot. (debian dhcp/pxe) First : Since last update EFI 2.6 my macbook(s) pro don't want to boot via netboot ... i have macbook too and they correctly netboot via deploystudio ! The 2.7 update doesn't a
-
Static memberfunctions in threaded environment.
How does static member functions behave in threaded environment? Do we have to do synchronize explicitly? Ex: Calss A{ Public A(){ }; public static Vector getData() // Read data into a Vector object return vector object;
-
Tecra A9 - Recovery Disc Creator malfunctioning
I've been trying to make recovery discs for my Tecra A9. I've successfully made the two System Recovery Discs (DVD-R), but when I try to make the Applications Disc I get a errormessage right after the program wants me to verify that i've put a blank
-
SSL received a record that exceeded the maximum permissible length. Error code: ssl_error_rx_record_too_long I get the above message often (but not always) when trying to access my Gmail account, Google docs, calendar, etc. There's really no rhyme or