ISPC chart type problem
Hi,
i am using iSPC Chart. in this in p type charts, i want to display no of defective items below range. for example, i have 2 column table no1, no2. i want to display no of items below no2 > 10. i used fixed query select count(*) as total from table1 where no2 > 10. it works in query temp but doesnt show any output in display temp. it shows as no data avail. please help me
- senthil
Hi Senthil,
You will need to also map the Upper and Lower Specification limits in the display template. You could have them to be based on the same column or have fixed values.
Regards,
Arijeet
Similar Messages
-
Setting Chart type property of iSPC chart dynamically doesn't work
Hi all,
I am trying to set the chart type property (XBAR, MEDIAN etc..) of iSPC chart dynamically from my html page.
This is the code that I used.
var chart_obj = document.iSPCChart.getChartObject();
chart_obj.setChartType("MEDIAN");
iSPCChart is my Applet name.
But the code doesn't seem to work.
The chart is always of the type that I have set in the iSPC display template.
Can someone help me in this regard?
Thanks a lot.
Regards,
M.SubathraM,
Even though that method shows up in the script assistant and the docs it really doesn't work.
Just swap out the display template for one saved with the desired type:
document.iSPCChart.setDisplayTemplate("Folder/MedianChart");
document.iSPCChart.updateChart(true);
With all of the alarm rules, colors, limits, settings, etc. it is not likely that you will have the same view (display template) that applies to every SPC chart type.
There is also a predelivered example of an SPC Chart that uses an iframe and an irpt to dynamically pass the chart type (along with other settings) you can reference: http://<servername>/Lighthammer/Samples/SPC/Servers.irpt
Regards,
Jeremy Good -
Can not converted to be a charter-type field
Hi everyone,
As i m new in abap . i wrote this code and received charter type error.
*& Report ZT11
REPORT ZT11.
DATA: aa type lfa1.
tables lfa1.
select * from lfa1 into aa where lifnr > 'Z' .
write / aa.
endselect.
if sy-subrc <> 0.
write / 'No records found'.
endif.
error is
'AA' can not converted to a character-type field.
plz help to reslove the error .
thanks in advance.
Edited by: Faisal Abbasi on May 9, 2010 11:19 AMHi Dear,
This is Unicode problem, In unicode systme some restriction in programing.
There is three kid of data type
Character Processing ( C, N, D, T and STRING ).
Byte Processing Mode ( X and XString ).
Numeric Data Type ( I, P , F ).
whenever in structure all kind of data types are used then you can not use WRITE and then whole structure name.
in LFA1 in ECC6.0 if any custom fields are not added then up to length 1232 is determined as Character.
so if you will give aa(1232) it will work similarlly other kid of remainig data tpe you move in another structure of required format and then check.
REPORT ZT11.
DATA: aa type lfa1.
tables lfa1.
select * from lfa1 into aa where lifnr > 'Z' .
write / aa(1232).
endselect.
if sy-subrc 0.
write / 'No records found'.
endif.
For better Understanding Check
The following structure has both character-type and non-character-type components:
BEGIN OF STRUC,
a TYPE c LENGTH 3, "Length 3 characters
b TYPE n LENGTH 4, "Length 4 characters
c TYPE d, "Length 8 characters
d TYPE t, "Length 6 characters
e TYPE f, "Length 8 bytes
f TYPE c LENGTH 28, "Length28 characters
g TYPE x LENGTH 2, "Length 2 bytes
END OF STRUC.
The Unicode fragment view splits the structure into four areas F1 - F5.
[ aaa | bbbb | cccccccc | ddd | AAA | eeee | fffffffffffff | gg ]
[ F1 | F2 | F3 | F4 | F5 ]
Offset/length access is only possible for the character-type initial fragment F1. Specifications such as struc(21) or struc7(14) are accepted and are handled as a single field of type c. An access such as struc57(2), for example, is not permitted in Unicode systems. -
Hello.
I have problem with bubble chart the problem is that in chart legend appear the same number of object what bubble in chart e.g. if chart have 5 bubble then legend also have 5 object.
What do I want to obtain is that in chart appear bubble which have different color (color depends on condition) and legend relate only colors. For example if chart have 4 bubble 3 - red and 1 - green then in legend appear only two position which relate green and red color (now appear 4 object three about red and one green).
Can any one tell me how to resolve this problem?I already did this I added three condition (three colors red, green and yellow) in field "Value of" I choosed "is equal to" unfortunately it didn't help.
Maybe I joust try to describe what I want to show in this chart.
Suppose I have table with four columns u201Cdateu201D, u201Camount (number type)u201D, u201Csize (number type)u201D, u201Crisku201D (text type) now where this value appear on chart:
- date is x axis
- amount is y axis
- size is a bubble size
- risk will be bubble color
Now I have 3 kind of risk u201CLowu201D (green color), u201CMediumu201D (yellow color) and u201CHighu201D (red color).
Now in my data base I have table with record:
- u201C11-11-2009u201D, u201C1u201D, u201C2u201D, u201CMediumu201D
- u201C12-11-2009u201D, u201C2u201D, u201C1u201D, u201CMediumu201D
- u201C13-11-2009u201D, u201C1u201D, u201C1u201D, u201CHighu201D
- u201C14-11-2009u201D, u201C3u201D, u201C3u201D, u201CLowu201D
- u201C15-11-2009u201D, u201C1u201D, u201C1u201D, u201CLowu201D
Ok so now In My chart I should have 5 bubble and in legend three value (green, red, yellow) but in this case I always have five (the same number what record in table).
Sorry if this example is not clear. -
Bubble chart with scatter chart type and different bubble sizes
Hello everybody,
I would like to create a bubble chart (scatter chart) within Oracle 11g and Apex 4.2 with the standard chart types that come with Apex (anychart).
I want to integrate two different KPIs (key performance indicators) in the chart, one for each axis (x and y) and additionally the size of the bubbles shall represent the size of the company, the KPIs belong to.
That is to say, every bubble represents a company with two KPIs and its size.
Now, I have problems changing the size of the bubbles. Can someone give me a hint where to start or how I could achieve this with a standard sql query (series) !?
Is that possible with the standard charts (scatter type)?
Can I control the color of the bubbles?
How can I control the starting and ending points of the axes in order to show all bubbles completely even if they are e.g. 0,0 (x,y) (this would show only a quarter of the bubble) or 0,3 (which would show only half of the bubble).
I will be very thankful for some hints.
Thank you very much in advance.
JohnnyGo to any chart and look at the examples. You can view the xml, there are bubble chart examples.
AnyChart - Cross-Platform Flash Charting Solutions For Your Project -
Getting all chart types in IChart
hai can some plz solve this problem
here im trying to plot the complete chart types of
Ichart in a single page with tag query.
for this i did it through simulator server i took One TagQuery , selected Mode as Taglist .And i took IBrwoser for list of tags with multi selection nd in that i enabled AlwaysExpandedMode and the Multiple Selection mode.Here im taking Chart types with select option in html and passing that variables into irpt file.in html page im taking list box of tag name for selecting tags and drop down of chart type for selecting chart type and one submit button for submiting the form.
for tagvalues im taking a array for counting the tag values nd passing it into irpt
that nd all fine
iam getting chart also but iam getting chart for only five values. so whats the problem im facing here is after refreshing if i select two tag values its getting replace with the first two values of previous chart .
so where im getting the problem could u plz let me know how to solve this problem
Thanks &Regards
ApsaraHi apsara,
From what i understood, the problem seems to be that the array is getting overwritten. Is it true??? Can u be more clear on this??
Regards,
Sushma. -
Business Graphics - Chart Type - Columns, and Simple Scatter Type
Hi,
I am interested to know more about Business Graphics Specially Chart types Columns and
Scatter type ( and Time Scatter). I am facing problem in producing X and Y Co-ordinate values for Charts. (Specially Date Values in X Axis.). I tried with Time Scatter type and need more documents.
Expecting Good Documents and suggestions.
Thanks,
Vinod VHi
Check this link
http://help.sap.com/saphelp_nwmobile71/helpdata/en/86/243f403f0a9354e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nwmobile71/helpdata/en/0b/79553b066d9414e10000000a114084/frameset.htm
https://help.sap.com/saphelp_nw04/helpdata/en/0c/95c83956852b51e10000000a114084/frameset.htm
thanks -
WAD 7.0 chart type stacked bars
Hello,
i have created a chart type "stacked bars", now i have one problem, i would like to create a sum over
the bar ? How can i do this. i have the sum in my query.
Thanks in advance
DetlevHi Detlev,
you see the sum (result in the query), but not in the chart, is that right?
If so, it might be, that the web template is cached somewhere (happend to me quite often). So try to delete the cache on the system, where you cannont see the sum. (in ABAP server you can do that in SMICM, in JAVA probably in NWA - but ask basis or portal guys to do that)
It might be also good idea, to test if it is really "chache problem", to first change some other paramater of the chart (colour or something) to see the actual version (the one, where the sum should be seen) is displayed on web or not.
Regards
Pavel -
Combining two different Chart types into one graph
Hi All,
I am developing a graphical BW report using WAD. I need to place two differnt chart types into one graph.For example, I have Volume and Quantity .Here the volume should be displayed in Bars and Quantity should be displayed in Lines in the same graph. X axis(Country) is same for these two . I am not sure how to achieve this. Please do let me know if anyone has solution for this.
Thanks for your time.
Thanks & Regards,
RajaHi Andreas,
One word I can say is 'Perfect' . Even though I am out of office now,I hope the example perfectly will solve my problem.I will try it.
Thanks for Aduri and Pcrao also for their suggestions .
Thanks again and I assigned points to all to say my thanks
Regards,
Raja -
Some chart types cannot be combined with other chart types
Good morning,
I am working on a MacBook Air (purchased Oct 2009) running Lion. While working in Excel 2011, I encounter the error "Some chart types cannot be combined with other chart types. Please select a different chart type." I am highlighting 46 cells to create a marked line graph. There are no other charts in the file. I called Microsoft support who told me they had not heard of this problem in Excel (only in PowerPoint). I also took it to an Apple Store Genius, who was unable to solve the problem, which is understandable, given that he does not work for Microsoft.
To try to resolve this issue, I have recopied the data to a new spreadsheet, re-typed all the data to a new spreadsheet, and deleted plist files. When I sent it to a different computer (which was running Excel 2011 and Snow Leopard), I could make the figure but I cannot edit the figure or add data on my laptop.
Any suggestions that you have would be much appreciated,
Signed,
One stressed out PhD student who desperately needs Excel to workHi, folks.
Apparently, when using Excel 2011 and running Lion, if the tab names in excel contain a period (.), this error occurs. I removed the periods and now I can graph again. I hope this helps anyone else who may experience this problem. -
Different chart types in one chart
Hi guys,
I need to know if there is any wat to mix two different chart types in WAD.
For instance, I have to key figures and I want to draw in the same chart Lines for one KF while I want Bars for the other KF.
Is this possible ?
Regards,This is done using the Secodary Axis. Check the following link.
http://help.sap.com/saphelp_nw70/helpdata/en/0b/ac553bf3a76258e10000000a114084/content.htm -
My daughter had completed a chart in pages. I saved it and then clicked on other chart types. Now I can't go back to the original chart she made even though I have not re-saved the file. How can I go back to her original chart with data?
I don't get what you are saying.
Is this all the same document?
What version of Pages?
Have you tried to revert to a previous version?
Peter -
Project Link:
PPPM
How to solve these problems.
Problem 1:
I have to scroll both the Gantt Chart and Task List scroll
simultaneously. When i scroll Gantt Chart , then at the same time
Task List and vice versa.
Problem 2:
How to stop Gantt Chart header movement stop when scroll the
Gantt Chart.
Problem 3:
In the Gantt Chart Node, there are 2 section. One is dark
section and other is lite section. I have to slide these scctions
like like HDevidedBox effect.
Please help me out from these problems.Hi Vedant,
values are displayed in pie chart their label is not display.
So you're able to view the value and label information when you hover over a slice i.e. viewing the tooltip, but you can't see the actual label for each slice of the pie. If you're not seeing all of the labels for the slices of the Pie chart, then this could due to a couple of reasons:
1) the length of the label
2) the position of the label
3) the size of the chart
Keep in mind that displaying all 41 labels on the chart could result in an extremely cluttered looking chart. AnyChart controls the visibility of the labels, depending on the above factors. So if your labels are quite lengthy, for example, and they are positioned to be displayed outside the chart, then AnyChart will display what labels it can for the given chart size. To work around this, having tooltips enabled is a good starting point. Alternatively, you could look at decreasing the length of the label text, changing the label position or even increasing the size of the chart. For further information on the label formatting, I would recommend reviewing AnyChart's online documentation, here: http://anychart.com/products/anychart/docs/users-guide/label-text-formatting.html?fromtree.
Regards,
Hilary -
Hi Experts,
is it possible to implement a new chart type for report in SAP?
Because the the sap Type could not help us?
Cheers
GiloThis is not possible directly with SAP BI.
You can try to implement a 3rd party add on similar to the one provided by IBS Solution. Please see attached link for some of the custom chart types implemented.
http://ibs-solution.de/CMS/en/gallery-3.html
Thanks. -
Business Graphics, intermixing chart types
Hi to all,
Has anyone tried to intermix chart types? Specifically, i'm trying to display a "column" type chart, but I would like to have a straight horizontal line through the chart indicating a key value or values. Any help would be greatly appreciated.
Thanks in advanceHi Michael,
follow the following link
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/web dynpro tutorial and sample applications.faq#q-20
How to use Business Graphics in Web Dynpro applications?
The following tutorial shows you step-by-step how to create a simple business graphic using Web Dynpro.
A simple business graphic is a chart consisting of a category and one or more data series. Column charts, bar charts and pie charts are typical examples of simple business graphics.
Simple business graphics differ from complex business graphics, such as scatter charts and portfolio charts.
Requirements
In order to use business graphics in your application, you must install the Internet Graphics Service (IGS) on your server environment. Furthermore, the IGS must be configured on the J2EE engine.
Code Sample
The ready-to-use project is available to download from SDN.
Corresponding Tutorial
Using Business Graphics
Hope this helped you
Regards,
RK
Maybe you are looking for
-
How can I make a button in Muse that bookmarks the page the user is on?
I want visitors to be able to push a button that bookmarks the specific page in their web browser. Is this possible in Muse? Or do I have to use third-party code?
-
Hi, i'm an event photoger and trying to figure out the least expensive way to process numerous 5x7 images with a predesigned psd template/frame for print. All the images will have the same frame on it as well be the same size. Current process is too
-
Needs to plot the values in x-axis linearly in obiee
Hello all, I am trying to plot the values in x-axis linearly . Actual it should be starting at -100,-50,0,50,100,150,200,250,300,350,400,450........ But now in my graph it is showing -100,-50,-25,-10,-1,+1,+25,+50,+100,+150.. Can you please suggest m
-
Executing output of order header not by RSNAST00
Hi to all. I would like to execute an output in order header that created with dispatch time 1-Send with periodically scheduled job. Is there any way to execute it except using RSNAST00? I would like to execute it from an ABAP program after creating
-
My old iMac was having problems so I backed up the hard disk to an external firewire drive using carbon copy cloner I have another imac in the office that was spare so I used the Migration assistant on that with the external firewire drive as the sou