Issue during Implementation SAP APPL Patch 26

Hi All,
I am getting this issue while importing a patch.                                                                               
The import was stopped, since an error occurred during the phase       
DDIC_IMPORT, which the Support Package Manager is unable to resolve    
without your input.                                                                               
After you have corrected the cause of the error, continue with the     
import by choosing Support Package -> Import queue from the initial    
screen of the Support Package Manager.                                                                               
The following details help you to analyze the problem:                                                                               
-   Error in phase: DDIC_IMPORT                                                                               
-   Reason for error: TP_FAILURE                                                                               
-   Return code: 0008                                                                               
-   Error message: A tool used by tp produced errors                                                                               
Thanks
Vijay/Mandarr

Hi,
Try to fallow below link.It will help you
<b>http://help.sap.com/saphelp_45b/helpdata/en/7e/c6c2ad98a711d2b429006094b9ea64/content.htm</b>.
i hope it will help you.
kiran kumar.v

Similar Messages

  • SOlman_setup issue at implement SAP Note Step

    Hi Friends,
    While i am performing the solman_setup (system preparation) facing once issue at Implement SAP Note step.
    In this step while i am performing  the post processing step (3rd step) giving the red signal The system only partially implemented the manual activities for note 1856234.
    And i followed the note 1856234 as per the note i ran the report AI_CRM_ANALYZE_IBASE_SORTF and i got the error messages.
    The Ibase component 000000000000003598 has deviceid: SID 00XXXXXXX
    Sort string is needed!
    Comp. with same device id:
    Replace Sort string with (from LMDB):
    The Ibase component 000000000000003272 has deviceid: SID 00XXXXXXX Etc.
    Sort string is needed!
    Comp. with same device id:
    Replace Sort string with (from LMDB):
    And as per the note
    when i am executing IB_GEN i am getting below errors.
    Object not found - will be created.
    No changes made; Saving not allowed
    Failed to save object %   1 (Object family 7001).
    Kindly suggest on this.
    Thank you,
    Chowdary.

    Please refer to SAP Notes 1694004 - Dealing with duplicate technical system names (SIDs) and 1747926 - Dealing with duplicate technical system names (old SLD)

  • Issue with implementing SAP note 1486147.

    I am trying to implement SAP note  1486147. My software component is SAP_APPL and release is 603. But the prerequisite notes (1148361 and 1339658) are  getting incompletely implemented with activation errors because of which I am not able to implement the main note 1486147.
    I have created all the DDIC elements as mentioned in the note.Also created the smartform. Has anyone successfully impemented this note? Is there anything else to be done other than what is mentioned in the note?

    Hi,
    Resolved the issues. Before applying the note i had made manual corrections in J_1IEWT_CERT because of which my system was not implementing the note. I reversed back all manual changes i had made and then applied the note. It got successfully implemented.
    Edited by: lyviaCardoza on Sep 3, 2010 7:24 AM

  • Issue of implement SAP Note

    Dear Expert
      When I implement SAP note through t-code SNOTE, it shows an alert message "SAP Note doesn't contain valid correction instructions". How should I fix this issue? Any response is appreciated.

    Dear Experts
       All SAP Notes I need to implement are :
       1118532, 1068198, 1014997, 599812
       These are all about Czech language.
      Our SAP version :
       SAP R/3 Enterprise 470 x 620
      Any idea??

  • What are the major issues in implementation SAP CRM sales and CIC.

    Hi
    We are newly implanting the project to the mobile Manfaturing Company. Our Clint is going for are looking to implement the CIC interaction center win Clint and the Sales modules of CRM .
    We have some 3rd parry raw data with us with that raw data we are calling to the customers and we want create the opportunity in the CIC after that we will convert the opportunity as a sales with our other sales people. After  that  they will sale that product to that customers.
    We have the back end of the R/3 SD, MM modules implemented for Clint.
    Now 1) I want to know after implementation what are the major issues will come in the project normally for the conman  Sales and CIC Win Clint projects kindly give the some  issues normally come  and solutions  for the problems also.
    My motto is that if I know the issues I can make preparation  for that conman issues and I will make my project with good effective and smooth running ..
    with Regards,
    prakesh
    Edited by: prakesh on Dec 9, 2009 6:04 AM

    hi prakesh,
    firstly, cic winclient is an older version and obsolete so its better to implement the new crm version.
    secondly, in any case if you want to implement, then your 3rd party raw data has to be mapped with the SAP system which could be a problem. Middleware could be a lot of effort. Rest all depends on how much customization you need for your business requirement in cic and sales. In case you are implementing standard functionality mostly then no major complications are expected otherwise lot of development effort may be required.
    regards
    shikha

  • BI content activation issue during implementation

    Hi,
    I am trying to activate the BI content for the 0FM_AREA InfoObject in BW 7.0. We are usning 3.X datasources from an ECC 6.0 system. I am getting several warning messages when trying a simulation of the install for the transfer rules of 0FM_AREA_ATTR and 0FM_AREA_TEXT. One of the warning messages is, "Field FIKRS not delivered by source system -> Deleted from rule". The others are similar, but for other fields. Can anyone tell me why this warning is happening?
    I have combed the web for information and have doubled checked all of the suggested remedies and none are changing the messages. Should I be activating using a differnt method such as through Object Types or Packages? Any help will be greatly appreciated.
    Best regards,
    Mark S.

    Personally, when I activate Business Content I tend to just ignore all warnings and even errors... I mean, take note of them, run the activation and when it is completed then I go and check all the newly activated objects... I don't even bother in doing a Simulation...
    There's a big deal of dependencies during this process and sometimes some of those errors are not real problems when you analyze them... From Business Content component version in BW and ECC to dependencies on objects already active but that for some reason are not detected...
    In your case, try to reactivate the datasource in ECC (RSA5, transfer datasource) for the infoobject, replicate it in BW and try the activation again... If you get the warnings still just finish the activation and then review/fix manually any missing links or objects...
    Just my opinion...

  • Issues during installation of WDJ7 Patch after new Smart Update version

    Hi everybody,
    today I installed the WebLogic Server 10.3.2 64 bit to use it for Enterprise Manager Grid Control 11g. One of the prerequisites is the WDJ7 patch for the WebLogic Server.
    After the update of the Smart Update on July 11 it is not possible to get that patch over the Smart Update gui (Note: 1294294.1). I tried to download the patch with the id 9438213 over My Oracle Support. The descripton (SU Patch [WDJ7]: Mandatory Patch required on WLS 10.3.2 for Oracle Grid Control (GC) 11.1 install) of the download looks fine, but in the zip file the jar WDJ7.jar is missing. The zip files contains only the following files:
    *4D53.jar*
    NIXN.jar
    patch-catalog_15563.xml
    patch-catalog.xml
    XLXA.jar
    README.txt
    How can I get the WDJ4 patch? Do I use the wrong patch id?
    Best regards
    Christian
    Edited by: cgohmann on 21.06.2011 15:20

    If you look at the install documentation of the Grid Control you'll find:
    "Ensure that you apply patch ID WDJ7 on Oracle WebLogic Server using the Oracle Smart Update utility. This patch fixes bugs 8990616, 9100465, and 9221722."
    After loading the patch into Smart Update you'll see that the 3 entries which appears under tab Manage Patches are in fact fixing those three bugs.

  • Problem during implementing SAP note manually

    HI
    I am implementing a note manually, which have instruction like below
    Manual Pre-Implement.
    VALID FOR
    Software Component   SCMSNC                         Supply Network...
    Release 700          Until SAPK-70006INSCMSNC
    Release 701          Until SAPK-70101INSCMSNC
    o  Open BAdI /SCF/CSV_SETTINGS in SE18
    -  Add the following 2 methods to interface  /SCF/IF_EX_CSV_SETTINGS:
    CHANGE_INPUT_ENCODING
    CHANGE_OUTPUT_ENCODING
    But when I go till point I can able to add the method as it is grayed out
    Is there any reason or different way of implementing the note manually?
    Regards
    Dev

    To implement note manually you need to get the access key. Once you give the access key you can apply the note corrections.

  • Critical Issues During SAP Implementation or After Golive

    Can anybody tell me one of  the most critical/ challenging issues During SAP Implementation or After Golive
    in these modules:-
    MM implementation
    PP implementation
    SD implementation
    FI/CO implementation
    PS implementation
    QM implementation
    HR implementation
    BI implementation
    XI implementation
    Thanks and regards
    RS

    hi,
    I will list out few of critical issues in
    Implementation :
    1 . Ensure 100% mapping of business process for all modules with SAP(avoid customization in support phase)
    2.  Unit & Integeration testing should be through with all validations
    3.  Master datas(Vendor,Customer) care must be taken will uploading datas thru LSMW,
    If there are common vendors for all plants,Create a vendor for a plant extend it to other plants
    4. Check tax procedures are customized according to requirements.
    5. Complete all print document customizations before go live
    6. Complete end user training(2 or more cycles) should be top priority before go live(This will avoid
    cancellation/reversal of documents after post go live)
    7. Ready with standard MIS reports & customized reports for business decision making
    8. Excise opening balance updation in tables for RG1 register in tables(Note 951955) on go live
    9. Check all tables datas are updating correctly
    10. Declare go live to SAP Support
    11. Check All user authorization should be correct according to their roles.
    12. Centeralize all master datas creation(avoid duplication)
    13. Create transaction variants to avoid entires in unnecessary fields & make certain fields mandatory.
    14. Ensure document numbering is completed for all documents
    15. Validate accounting entries are hit properly according to requirement in quality client with FI CTM(Core team member).
    After Go live :
    1. Missing authorization for users will play key part here,For ex : PGI while doing delivery,Excise capture & post in MIGO/J1IEX.
    2. Do internal audit every month,identify transactions if there will possibility for misuse or wrong entries,requires validation,identify users weak in certain areas.
    3. Identify there is enhancements to be done in transaction process(By step-2)
    4. Prepare a list of month & year end activities to be performed for all modules give to users
    5. Prepare  a list of frequently used transaction codes module wise give it to users
    6. If there is subcontracting,ensure challan creation,GR,reconcillation should be done regulary(monthly)
    7. Train the users,take reports in respective modules.
    8. Additonal customization might be done in print documents.
    9. Instruct users/CTM's to adapt SAP Standard practise
    10. Update excise tax rates after every indian budget
    Hope it helps.
    Edited by: Jeyakanthan A on Apr 29, 2010 6:48 PM

  • Dear All,what are the major issues in implementation in sap hcm

    what are the major issues in implementation in SAP HCM project scope is PA ,OM,TIME, INDIA PAYROLL

    Hi Ramjan,
    Try to have a clear understanding of requirements and find the best solution in SAP. Keep as much as possible everything standard and based on SAP best practices.
    In PA look for a comprehensive enterprise structure. It's base for everything.
    DON"T do anything through development(ABAP code) as much as possible specially in PT and PY. Try to do claculation by PCRs and Schema.
    Regards,
    Omid

  • Getting S.M.A.R.T. when trying to install Mountain lion. Hard drive works pretty well. I understand that many users have been facing the same issue. Has apple patched it yet?

    I'm getting S.M.A.R.T. error when trying to install Mountain lion. Hard drive works pretty well despite the Failing status. I understand that many users have been facing the same issue. My hard drive was/is working perfectly. Has Apple patched it yet?
    Has someone found a solution which is not replacing the hard drive which works just fine? Or Is anyone aware of a procedure that can force the installation despite the S.M.A.R.T error? Below details of my hard drive
    Thanks
    ST31******ASQ:
      Capacity:          1 TB (1,000,204,886,016 bytes)
      Model:          ST31000528ASQ                          
      Revision:          AP24   
      Serial Number:                      6V***5JR
      Native Command Queuing:          Yes
      Queue Depth:          32
      Removable Media:          No
      Detachable Drive:          No
      BSD Name:          disk0
      Rotational Rate:          7200
      Medium Type:          Rotational
      Partition Map Type:          GPT (GUID Partition Table)
      S.M.A.R.T. status:          Failing
    <Edited By Host>

    If you haven't done so, run Disk Utility  /Applications/Utilities
    to run a live verification.
    The drive may be ok at the moment, but that's not to say the drive may fail at anytime.
    Hopefully you have all your important data backed up just in case.

  • SAP R/3 to External System RFC issue during Sales Order Processing

    Hi Experts,
    We have one Peculiar issue in our SAP R/3. Request you to help me in resolving this.
    Order Processing:
    During Sales Orders Processing, for every line item a RFC is being initiated from SAP R/3 to an external system called Trilogy Pricer to get the Pricing data. 
    Trilogy Pricer sends the Pricing data to SAP R/3 and the respective Orders are being processed in SAP R/3.
    Current Issue:
    The issue we are facing is that, once the Pricing data is sent to SAP R/3, Trilogy Pricer expects an acknowledgement (RFC_OK) from SAP R/3 in order to release the RFC connection.  Intermittently, Trilogy Pricer is not receiving this or any kind of acknowledgement from SAP R/3 causing the connection to hang which is causing several problems.
    For example:
    On every business day, there will be 50,000 Sales orders.
    So, 5 or 10 sales orders are getting hanged every day.
    We tried to simulate this issue in Dev and Stage environments by processing 30,000 to 40,000 sales orders.
    But we were unsuccessful, which means all the RFC connections were being closed as the external system is able to get the acknowledgements for all those orders from SAP R/3.
    We are having this problem only in Prod.
    Any thoughts to solve this issue is highly appreciated.
    Advance thanks for your great help.
    Thanks and Regards,
    Srinivasa

    Hi I am not sure if it was similar issue, but I once had a kindaa problem I solved using
    CALL FUNCTION func STARTING NEW TASK task
                  [DESTINATION {dest}]
                  [{PERFORMING subr}|ON END OF TASK].

  • SAP NOTE 748028 ISSUES in Implementing for message SE117

    Hi Friends,
    I am not able to implement SAP NOTE 748028. After Downloading in SNOTE it's saying 'Note can't be implemented', but I am not finding any Correction instruction inside the NOTE.
    I was getting error message SE117: General Error During Acceptance Posting while transferring Shipment via Tcode VI02.
    PLEASE HELP IN THIS REGARD.
    Thanks & Regards
    Anirban

    Hello,
    As you mentioned note 748028 has no code correction hence you can not implement it via SNOTE.
    Concerning SE117,  99% of times is due to customising settings.
    Please follow note 748028. This note provides valuable information
    to find out the real error under general SE117. See "Strategies to determine the cause" section.
    Regards,
    Wen Peng

  • Error during implementation of SAP Note 41715

    Hi,
      I got the following error during implementation of SAP Note 41715.
    "Error during RFC connection to SAPNet, cannot update SAP Note"
    Why do we get this error? Any ideas.
    Thanks,
    Ibrahim

    Hi,
    this SAP note is a very old SAP modification note.
    I  think, you have to do all work manually.
    But have a look at the note: You have to install some other SAP notes before that!
    Regards,
    Klaus

  • Real time critical issues in  Implementation Project

    Hi friends
    Please send  me the *Real time critical issues in  Implementation and Development  Projects*
    Thanks
    Srikanth Reddy.P

    Hi
    Blue Print: Assume the client is already having sound legacy system in place.
    Also assume that all the processes in FICO are neatly documented with visios.
    Now study those process flows and prepare a list of sub processes.
    Now prepare the fits/gaps/ assessment.
    If the process fits into SAP it would be a fit. If an enhancement / modification is required, it goes into the red column.
    Record all the discussions with the core users against each process and sub process.
    Also list down the dependencies for each process / analyse the integration aspects.
    Also plan how you would convert the legacy data into SAP.
    The whole document should have illustrations / scenarios and ultimately signed off. This at any cost should not be changed unless, there is a total turnaround in the process requirements.
    With the finalised blue print, you could start the activities in the implementation.
    Now regarding the interview questions:
    - Starts with your resume. How you have projected yourself. Have you shown real time experience or faked up projects. In any case, it is very easy to make out whether you have experience in implementation or support environment. You could never fool the interviewer.
    Initially the interviewer would try to make an assessment on your genuinity.
    - When did the implementation start?
    - When did it GOLIVE?
    - Were you involved in the end to end implementation or was it a partial role?
    -If you are supporting the client, who implemented SAP?
    - What tool do you use to track the support activities?
    - How many tickets have you handled so far?
    - Name some critical issues which you resolved and without which the production or business got affected?
    - What is the system landscape ?
    -Have you developed any reports / enhancements / technical / functional designs?
    - Are you aware of interfaces / ALE / IDOCs ?
    - Are you aware of SLAs
    - Rate yourself on a rank of 1 to 10 in FI and CO
    - How often have you interacted with client during implementation / support?
    - What process designs have been prepared by you?
    - How do you react when you get a critical issue or cross modular issues?
    And so on and on
    Hope this helps

Maybe you are looking for