Issue exporting ms access 2003 to xml - error 35021

I downloaded the latest version of migration workbench.
I have access 2003 mdb. when I run the omwb2003.mde against it to export to xml, i get the following error
Error #35021 - - Can't find project or library, c:\temp\plc.mdb Database Schema Export did not complete successfully.
The access database is a design master (not a replica) and no security enabled.
Access ODBC driver is 4.00.6019
I downloaded and installed MDAC .
Where do i go next - I wasn't able to find anything on error 35021.
Thanks in advance for any and all help
Peter

I was having this 35021 problem but finally got it to work. I was running on win 2000, with Access 2002 installed. I tried it on another computer on the network, running win xp pro and the same version of Access 2002. I didn't get this problem, but after several minutes, the Access running the database to be exported would crash. The omwb2002 reported the schema written, but there was no output file.
I had the omwb2002.mde on the file server, and the database being converted on the win2k machine. I moved both the omwb and the database to a local drive on the win xp machine, set the output directory to be on the local drive, and it worked.
I did some further expirementing, and it seems to work fine as long as the omwb2002.mde is on a local drive of the machine it's going to be run on.
The fact that it works on one machine but not another indicates that this problem isn't specific to the database being converted, but has something to do with the platform the conversion is being run on.
I realize this isn't a fix, but a workaround. If you can't wait for tech support to fix this problem, my advice is keep trying on different machines until you get it to work. Make sure that the .mde is on a local drive.
I hope this helps

Similar Messages

How do I view Migrate Data errors - Access 2003 - Oracle 10g

I'm trying to use the SQL Developer to migrate data from an Access 2003 database to an Oracle 10g database. I followed the instructions found here:
http://www.oracle.com/technology/tech/migration/workbench/files/omwb_getstarted.html
I was able to complete every step except the actual data move. I exported the xml for the Access database, I captured the export and then ran the generation scripts on my target Oracle database (I'm using the same schema for the migration repository and the actual data). It created the tables with only one or two errors which I resolved.
Now, when I select Migration->Migrate Data, I get the dialog that appears to start 4 or 5 threads and attempts to migrate each table. They all error and do not transfer any rows. I can see that there's one error per table, but I can't see the error text. I just know that an error occurred. Is there a log somewhere or is the error displayed somewhere else? How do I know what's gone wrong?
Thanks.

I too receive unexplained error counts using the Migrate Data menu selection and unexplained failures using the Generate Data Move Scripts menu selection. Permissions granted by role or direct grants should not be a problem, but a Migrate Data error appears in the Migration Log panel at the bottom of the SQL Developer window, "Failed to disable constraints: ORA-00942 ... ". No further details available on what constraints or why the error. No other errors were detected while following the instructions found in the Oracle SQL Developer Migration Workbench Getting Started guide. SQL Developer never migrates the data from the existing Access 2000 mdb file to the newly created schema objects in Oracle 10g using either method. The following roles and privileges have been granted to both the repository owner and the target schema owner:
GRANT RESOURCE TO MIGRATE_USER WITH ADMIN OPTION;
GRANT CONNECT TO MIGRATE_USER WITH ADMIN OPTION;
ALTER USER MIGRATE_USER DEFAULT ROLE ALL;
-- 25 System Privileges for MIGRATE_USER
GRANT CREATE ROLE TO MIGRATE_USER;
GRANT ALTER TABLESPACE TO MIGRATE_USER;
GRANT ALTER ANY SEQUENCE TO MIGRATE_USER;
GRANT INSERT ANY TABLE TO MIGRATE_USER;
GRANT SELECT ANY TABLE TO MIGRATE_USER;
GRANT CREATE ANY TABLE TO MIGRATE_USER;
GRANT UNLIMITED TABLESPACE TO MIGRATE_USER WITH ADMIN OPTION;
GRANT DROP TABLESPACE TO MIGRATE_USER;
GRANT CREATE ANY TRIGGER TO MIGRATE_USER;
GRANT ALTER ANY ROLE TO MIGRATE_USER;
GRANT CREATE VIEW TO MIGRATE_USER WITH ADMIN OPTION;
GRANT DROP USER TO MIGRATE_USER;
GRANT CREATE TABLESPACE TO MIGRATE_USER;
GRANT GRANT ANY ROLE TO MIGRATE_USER;
GRANT CREATE ANY SEQUENCE TO MIGRATE_USER;
GRANT ALTER ANY TABLE TO MIGRATE_USER;
GRANT DROP ANY TRIGGER TO MIGRATE_USER;
GRANT DROP ANY ROLE TO MIGRATE_USER;
GRANT DROP ANY SEQUENCE TO MIGRATE_USER;
GRANT UPDATE ANY TABLE TO MIGRATE_USER;
GRANT ALTER ANY TRIGGER TO MIGRATE_USER;
GRANT COMMENT ANY TABLE TO MIGRATE_USER;
GRANT DROP ANY TABLE TO MIGRATE_USER;
GRANT CREATE PUBLIC SYNONYM TO MIGRATE_USER WITH ADMIN OPTION;
GRANT CREATE USER TO MIGRATE_USER WITH ADMIN OPTION;
-- 1 Tablespace Quota for MIGRATE_USER
ALTER USER MIGRATE_USER QUOTA UNLIMITED ON USERS;
Operating system for both Access 2000 and Oracle 10g is Windows XP PRO SP2.
Oracle SQL Developer is version 1.1.2.25 build MAIN-25.79 on Windows XP PRO SP2. All three are on the same PC.
Since only the last step failed, I created a User DSN with the ODBC administrator. Then, linked the newly created Oracle table to Access via ODBC using the DSN created. Next, I created an append query with the source being the Access table and the target being the Oracle table. I moved the data by pressing the red exclamation mark.

Can not create XML file from MS Access 2003

Hi,
I am getting error as "Error loading in DLL" when I use msaccess_exporter to create XML file for migrations usind Access 2003 DB. Does anyone know about this? If yes, could you please let me know how to resolve it?
Thanks,
Kartik

Hi Daniel,
I believe you are seeing the message "Table'_OracletblDatabase' already exists" because you are attempting to export an MDB file that you previously attempted to export, but that initial export process may not have run to completion. I recommend opening your .MDB file, and delete any "_Oracletbl..." table objects that exist under the list of Table objects. Close the MDB file and carry out the export process again. You should now be able to use the 2000 mde file.
I hope this helps.
Regards,
Hilary

SQL Exoress 2008 import export Wizard wont import Access 2003 mdb to SQL 2008 DB

Just installed SQL Express with Tools, including SSME and Import Export Wizard.
Attempted to transfer Access 2003 DB tables from an mdb file to a SQL 2008 Express DB.
I can view the data in the tables in Access, however, when I tell it to do the deed, it begins the process and then errors out with a Error 0xc020801c:
"TITLE: SQL Server Import and Export Wizard
Could not connect source component.
Error 0xc020801c: Source - ParentingStats [1]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "SourceConnectionOLEDB" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
ADDITIONAL INFORMATION:
Exception from HRESULT: 0xC020801C (Microsoft.SqlServer.DTSPipelineWrap)"
I am unable to find anything that translates this into something mere mortals can deal with. This is repeatable.
Steps in the wizard:
1. Source: Data Source selected is "Microsoft Access". The filename is correct. The username is correct. The password is blank (there is no password in the Access db). Clicking on the "Advanced..." button, I get the opportunity to "Test Connection". I test the connection and the test is successful.
2. Destination: I select my server name and the SQL Native Client, select Windows Authentication, and Select my SQL 2008 Express db from the dropdown list.
3. Specify Tabloe Copy or Query: I select Table copy
4. Select Table or Views: I check the tables I want to copy and successfully preview the data in each table that I checked. I click on "Edit Mappings ..." and verify that I want to create a new table for each checked table.
5. Run package: I accept the pre-checked "Run Immediately" and click the NEXT button
6. I get the following:
"Source Location : C:\Users\wb5rvz\Documents\StatisticsApp_V3_69.mdb
Source Provider : Microsoft.Jet.OLEDB.4.0
Destination Location : SHACK_PC\SQLEXPRESS
Destination Provider : SQLNCLI
Copy rows from `ParentingStats` to [dbo].[ParentingStats]
The new target table will be created.
Copy rows from `Statistics` to [dbo].[Statistics]
The new target table will be created.
Copy rows from `StatsSummary` to [dbo].[StatsSummary]
The new target table will be created.
Copy rows from `Volunteers_Confidential` to [dbo].[Volunteers_Confidential]
The new target table will be created.
Copy rows from `YearMonthTbl` to [dbo].[YearMonthTbl]
The new target table will be created.
The package will not be saved.
The package will be run immediately.
Provider mapping file : c:\Program Files\Microsoft SQL Server\100\DTS\MappingFiles\JetToMSSql9.xml"
7. I click the FINISH button and I get
"Initializing Data Tasks .... Success"
"Initializing Connections ...Success"
"Setting SQL Commend ....20% Compoete"
"Setting Source Connection ...Error (and an error link)"
(All following tasks were "Stopped"
Error detail is:
===================================
Could not connect source component.
Error 0xc020801c: Source - ParentingStats [1]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "SourceConnectionOLEDB" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
(SQL Server Import and Export Wizard)
===================================
Exception from HRESULT: 0xC020801C (Microsoft.SqlServer.DTSPipelineWrap)
Program Location:
at Microsoft.SqlServer.Dts.Pipeline.Wrapper.CManagedComponentWrapperClass.AcquireConnections(Object pTransaction)
at Microsoft.SqlServer.Dts.DtsWizard.Execute.SetSourceConnection(Exception& ex, TransformInfo ti)
OS is Vista Home Premium SP1 (32 bit)
Processor = Intel core 2 duo E7200 @ 2.5 GHz
SQL Server Software was just downloaded yesterday, so it is whatever is current on the download site:
SQL Express with Tools
So, how do I get this transform to work? I do not have nor do I want/afford to put Access 2003 on this machine.
Thanks
RRR

I had this similar problem - 32-bit SQL Server 2005 trying to import tables from Access 2000 .mdb file, same error:
Error 0xc020801c: Source - ParentingStats [1]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "SourceConnectionOLEDB" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
(SQL Server Import and Export Wizard)
===================================
Exception from HRESULT: 0xC020801C (Microsoft.SqlServer.DTSPipelineWrap)
I know you said you clicked "Advanced..." and Test Connection when you chose your Access database - but that is what resolved the error for me. I chose my .mdb file, username is admin, password is blank, but if I don't click the Advanced button and test the connection before continuing on, the import fails with above error message. Go figure, since the username/blank password is correct.
FWIW, sorry if that doesn't help you though.

SSRS XML Errors when exporting to .xlsx from Dynamics NAV Database

We use Dynamics NAV for our ERP and have many SSRS reports. We get xml Errors when exporting to Excel .xlsx. I've seen this happen since SQL 2008 R2 and have posted in many places trying to find an answer, but was hoping MS would solve the
issue. The numeric data types in the Dynamics NAV database are all decimal(38,20) and when the value is zero the Excel renderer throws the errors.
We now have over 400 reports and we export them to Excel 2003 format. I'm starting to feel like this is my new Y2K issue when Excel 2003 is set to sunset. I'm fearing that I'll have to do conversions on all numeric data types for all reports.
Both of these are Microsoft products so I'm wondering is this even on their radar.
We're running SQL Server 2012 SP2, and just rolled out CRM 2015 on SQL Server 2014. I get the errors in SSRS 2008R2, 2012, and 2014. Has anyone seen this before?
Timothy Kruse

Hi Skywalker73,
According to your description, when you export the report to Excel, the error “Excel was able to open the file by repairing or removing the unreadable content.” throws out when opening the Excel file.
Based on my research, it has reported the same issue when exporting to Excel. The issue could cause by numeric columns has a precision of 16 or higher. To fix the issue, we could change data type in the table to a support lower precision, or convert
the numbers in the stored procedure that populates the report. For more information, please refer to this article:
SSRS 2012 Bug – “Excel found unreadable content”. Besides, please refer to this
article to check if non-printing characters exist in the report.
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support

Microsoft Access 2003 - Import xls issue

I'm having an issue with oracle SQL developer which exports an xls file then I proceed to import that xls in Microsoft Access 2003. I got a following error message related to the headings.
"The first row contains some data that can't be used for valid Access field names. In these cases, the wizard will automatically assign field names."
If I proceed with this issue in Access, it'll bring up an error message about importing the xls in Access.
I have a solution by removing the trailing column via Excel application then import the xls. I wonder any one have any better wayaround this issue?
I have the latest version and it has 2 patches.
Thanks in advance.

I forgot to mention the last column has some trailing spaces in the first row.

Export a Final Cut Pro XML file problem about translation issue

When I export the final cut pro xml file, there is always translation issue like that 'Transition <....> not translated, Cross Dissolve used instead.'
Most of the transition type can cause the translation issues except the wipe and cross dissolve.
Is there any body knowing the reason? Is that OK?
By the way , I am using the trial version of cs5

Hey Ani_,
I've been working with Adobe products for a long time and typically when you come across an error that has anything to do with a XML file export problem its due to things such as effects you may have added in, color corrections, cross fades or any type of video transitions between clips. Remember your work flow should be
Import your footage into Premiere Pro
Name your clips (helps find things later on)
Place clips on time line in the order you wish (ONLY MAKE CUTS don't add anything, transitions color effects nothing)
Then once your clips are all placed on the timeline in your correct order you then EXPORT> Final Cut Pro XML
Now you can bring this into other programs for color grading or whatever else your going to do. You will notice you have no errors on the export.
Once your done doing what your doing to the clips in another program (for example: Divinci Resolve color grading) you can then export them back to your main project then add your effects and transitions.

Access 2003 - Repeated "You cant make changes to the database" error

Hey all,
Im having a very strange problem with Microsoft Access 2003, we work with old databases and when we open them up through Access 2003 we get the message "you cant make changes to the database objects" error, which is expected. However the laptop has started to repeat this message over and over about 8 times after the first time you click on it. Its very annoying to have to keep clicking to get rid of the error message. Its a very strange problem, any ideas on how to solve this or even to explain what might of happened will be appreciated.
Thanks in advance
P.S. It is not an option to update the database, we work with a program that uses an old 97 database and if you update the database the program will stop working.

Hi
Firstly it doesnt seem that this is a Toshiba notebook fault.
This sounds more like a Microsoft issue.
I would recommend checking the Microsoft knowledge base articles or/and contact the Microsoft support.
I have investigated a little bit and found these pages. Maybe you will find useful infos.
http://www.smartcomputing.com/Editorial/article.asp?article=articles/WebOnly/TechSupport/420w10/20w01.asp&guid
http://support.microsoft.com/kb/824260/
http://support.microsoft.com/?scid=kb;en-us;824278&spid=2509&sid=98
Good luck

Error while migrating from ms access 2003 db to oracle 10g in sqldeveloper

Hello,
i am working on migration project from MS access 2003 to Oracle 10g on windows XP sp2 plateform using SQL developer.
it went quit smoothly till the "capture microsoft access" .so in this step the sql developer opens the access db in background... but while opening the file in background it gives error
Object library not registered i tried many workaround but of no use..
anybody's help in this regard would be well appreciated.
thanks.

Hi,
Did you follow all the steps in the SQL*Developer documentation about preparing the Access database for migration -
Oracle® SQL Developer User’s Guide Release 3.0 -
2.2.4.3 Before Migrating From Microsoft Access
and -
Oracle® SQL Developer Supplementary Information for Microsoft Access Migrations Release 3.0
2.4 Preparing the Microsoft Access Database for Capture
The error also indicates there may be a problem with your Access installation so could you check that everything is okay with that ? I have found references that indicate a re-install of Office/Access will prevent the error.
Regards,
Mike

MS Access 2003 PDFMaker Error

OS: XP Pro Ver 2002 SP2
App: MS Access 2003 SP3
Adobe Acrobat 8 Standard 8.1.2
I can't print Access Reports using PDFMaker unless I'm logged into the PC with admin rights. However printing to Adobe PDF does work without admin rights. I tried some of the suggestions in Tech Note 333235 with no luck.

Yes, and no.
I had the MS Access file opened, but not the table which I was writing to.
I had been manually deleting, and recreating the table in MS Access each time I wrote to it via JDBC. I was testing different ways of handling SQLException.
The JDBC examples in both books, and this website ended the update (or any) statement whenever there is an occurence of SQLException. I moved the try/catch inside a "labeled" while loop, so the program would append the error message to a log, and continue to process the next recordset until the EOF. I was successful after a few trials; it works better than the import function from MS Access.
I think my clipboard was very full when I copied and pasted table several times.
Thank you.

OLE object error when using with Access 2003 and Adobe Reader X

I link to .pdf files in Access 2003 and since upgrading to Adobe Reader X yesterday, am unable to link to these files. I receive an error stating "A problem occurred while accessing the OLE object". It goes on to tell me to verify that the file is where I say it is and that it is accessible, which it is. I can go to that file in Adobe Reader and open it.

Disable the protection mode in the preferences of Adobe Reader.

Trouble exporting 11-min film as XML because of audio translation issue

Hi, I am trying to export a short film XML file of approximately 11 minutes for a sound engineer and it's coming up with a ton of audio translation issues.
Can I attach the report and someone help me? Most of the issues are audio tracks from ADR but I recorded them with the same H4Zoom I used for the original, and some were the original production audio to which I applied the DeNoiser effect. They're all stereo files with the exception of a few mp3s which were special effect sounds. Why are they not being translated? What can I do to get this into an .xml?? It looks like somewhere between 100-150 audio files were not translated.

are you using merged clips? premiere merged clip XML issue
if the sound engineer will take another format, premiere can export OMF or if you have audition you can open the OMF in audition and export it as a fcp xml.

VB6 - Access 2003 Password Error

Hi
I have a VB6 application that connects to MS Access 2003 DB using ADODB . We have migrated to Windows 7 (64 bit) from XP and now I am getting the Error 3031 - Password Not Valid. A sample of the connection code is below
STRING_DB_ATTRIB = "Provider = Microsoft.Jet.OLEDB.4.0;Data Source = " & SERVER_LOCATION & DB_PATH & ";"
Set mCon = New ADODB.Connection
mCon.ConnectionString = STRING_DB_ATTRIB
mCon.Properties("Jet OLEDB:Database Password") = DROWSSAP
mCon.Open
Any ideas please?
Thanks in Advance

Hi,
Since VB6 product is not supported in this forum, you may go to these forums for support:
#Where to post your VB 6 questions
http://social.msdn.microsoft.com/Forums/en-US/6a0719fe-14af-47f7-9f51-a8ea2b9c8d6b/where-to-post-your-vb-6-questions
Thank you for your understanding.
Best regards,
Franklin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Export Access table into SP - error on hyperlink fields?

I'm trying to Export an Access DB into Sharepoint. There are two hyperlink fields in the master table that seem to be blocking the transfer. The fields are named XLS and PDF. The data content of the links look like: "XLS#m:\aaaa\bbbb\cccc\dddd.xlsx"
In the Access master table, you'd see XLS which would be a link to
'm:\aaaa\bbbb\cccc\dddd.xlsxm:\aaaa\bbbb\cccc\dddd.xlsx'
The actual message in the error log is:
There was an error copying data to a SharePoint list. URL data 'M:\aaaa\bbbbb\ccccc\ddddd.xlsx XLS' in field 'XLS' could not be sent to the server. The URL may be invalid or longer than 255 characters.
Is it trying to access the xlsx file itself? If i remove the hyperlink fields, everything works. However, what do i need to do to be able to include these two fields?

Hi,
According to your description, my understanding is that the Access table cannot be exported to SharePoint with the hyperlink fields.
The format of the hyperlinks in the hyperlink fields XLS and PDF are invalid in SharePoint, so the error occurred when exporting the table to SharePoint.
I recommend to share the files linked in the hyperlink field with the users you need and use the following link format in the hyperlink field:
file://aaaa/bbbb/cccc/dddd.xlsx.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Access 2003 Embedded OLE Object + Acrobat Reader 9.2 error on close?

This seems to be a known problem without a known solution.
We have a SQL database backend and an Access 2003 frontend. The Access client displays scanned PDF documents via an embedded OLE Object field.
Up until recently, we had been using Acrobat Reader 6.0 as the default viewer, but we switched up to 9.2 so that our staff could read external PDFs with security/encryption,etc. When an embedded PDF is viewed now through the Access client, an error is thrown when Acrobat Reader is closed, indicating that an OLE server was not registered, or needed to be re-installed. This did not happen with the Acrobat 6.0 client.
Is there any automatic behind-the-scenes file updates being performed when Acrobat Reader 9.2 shuts down? It seems like some information is trying to be written (maybe a timestamp?) and is kicking back an error when it can't update the target file.
Is there a workaround for this? I need the ability to read secured PDFs, but I also don't want my users having to needlessly deal with persistent error messages.

Disable the protection mode in the preferences of Adobe Reader.

Issue exporting ms access 2003 to xml - error 35021

Similar Messages

Maybe you are looking for