Issue in ABT1N(Intercompany transfer) - expired/remaining life

We are executing ABT1N for Inter company tranfer.
In Transfer variant, field transfer Group 19 & 20 - we have selected copy check box.
(Accounting is perfectly alright)
However, when we execute this transaction, expired/remaining useful life is not getting copied correctly into new asset.
Copying pattern is for example:
Old asset                                                       New Assets
Useful life            4 years                                4 years
Expired Life         3 years 8 months                  4 years 4 months
Reamianing life    4 months                              Nil
Above indicates that for new asset - Expired life, year is copied from Useful life(old asset) & period(month) is copied from Reamaining life(old asset). This is incorrect.
Kindly advise any suggestion/corrective action so that Expired & Reamaining life are updated correctly in New Asset
Thanks
Nikhil

Hi Prasad,
Please reconfirm whether you maintained AO90 settings for below mentioned items..
Contra account: Acquisition value
Acquisition from affiliated company
Please find below the expected entries.
Best Regards,
Madhu

Similar Messages

Depreciation planned calculater not as remaining life balance

Hi SAP Expert,
Currently, i have an issue on depreciation planned calculate divided by 12 month instead of 2 month remaining life balance.
Asset Parameters
Useful Life: 3 / 0
Expired Useful Life: 2 / 10
Remaining Life: 0 / 2
Net book value balance is 59,907 and scarp value is 1. So depreciation will divided by 59,906.
Now i see the depreciation posted/planned is every month 4,992.17 for 12 months.
As the asset just left two month life, isn't that depreciation posted/planned will be 29,953 for 2 months?
I am suspect configure on depreciation key.
Please advice where to configure calculate depreciation base on remaining life?
Thanks
regards,
ng chong chuan

Hi sanjeev and Giridhar,
Thanks for your guys helping.
My depreciation key is set base on below
Dep/int                    Phase    Base method      Decl-bal method    Period Control   Multilevel method
Ord.depreciation    1            0011                   001                       005                  001
Ord.depreciation    1            0017                   001                       003                  003
Base method
0011
Type of depreciation            Ord.Depreciation
Dep. Method                       Percentage from the useful life
Reduce use.life at FY end    Blank
Dep.after plnd life end           No
Dep below NBValue zero      No
Curb                                   No
0017
Type of depreciation             Ord.Depreciation
Dep. Method                       Immediate depreciation
Reduce use.life at FY end    Check
Dep.after plnd life end           Yes
Dep below NBValue zero      No
Curb                                   No
Detail for the asset:
Acquisition Date        : 29.09.2006
Capitalization Date    :   29.06.2006
Useful Life                 :    3 years
Depreciation Start Date( Depreaciation Areas tab) : 01.06.2006
But i have seen the first depreciation posted on 30.09.2006 and not 30.06.2006
Please advice.
Thanks
regards,
ng chong chuan

RMS Intercompany Transfer

The RMS transfers between different legal entities are sent to the GL for the financial operations, and the type of transaction i.e. transfer vs. invoice; created is determined based on RMS system options: ‘Intercompany Transfer Basis’ and ‘RAC RTV Transfer Indicator’.
‘Intercompany Transfer Basis’ can have values T and B. I want to understand how RMS behaves differently when ‘Intercompany Transfer Basis’ is set to T and when ‘Intercompany Transfer Basis’ is set to B.
Under what conditions of Intercompany Transfer in RMS will an invoice be created and where is the invoice created?
Edited by: user13738716 on Feb 19, 2011 10:29 AM

Firstly, had try to create the new asset by T-code AS01 but i need to provide the depreciation period with zero value as the asset is fully depreciated with zero life depreciation. However, system do not allow for input zero depreciation period in the new asset. Kind advice, any configuration need to been set ?
Secondly, I had try using the ABT1N to do the transfer of asset however it prompt me for entering the intercompany account need to setup? Kindly advise using ABT1N do we need to setup the intercompany clearing account? What are the double entry inccur/impact by using ABT1N to transfer asset?
For your information, due to the lack of knowledge using ABT1N. We had try to do the manual retirement of asset and manual creation asset and posting the asset using t-code F-02 as mention prevouis question.
I hope to know how to solve in both method to rectify the problem more effectively.

Intercompany transfer asset with NBV 1 and zero

Can SAP R/3 system do the transaction intercompany transfer asset with
NBV 1 and zero value?
Beside, can SAP R/3 system perform creation of asset with NBV 0 and 1?

Firstly, had try to create the new asset by T-code AS01 but i need to provide the depreciation period with zero value as the asset is fully depreciated with zero life depreciation. However, system do not allow for input zero depreciation period in the new asset. Kind advice, any configuration need to been set ?
Secondly, I had try using the ABT1N to do the transfer of asset however it prompt me for entering the intercompany account need to setup? Kindly advise using ABT1N do we need to setup the intercompany clearing account? What are the double entry inccur/impact by using ABT1N to transfer asset?
For your information, due to the lack of knowledge using ABT1N. We had try to do the manual retirement of asset and manual creation asset and posting the asset using t-code F-02 as mention prevouis question.
I hope to know how to solve in both method to rectify the problem more effectively.

Negative differences during intercompany transfer

Dear Frnds,
during the intercompany transfer,negative differences we're getting when posting PGR's(post goods receipt) Inbound Deliveries, all from Vendor1(company code A) into company B(company code B).
Logistics had experienced three differences in pricing, that are unmatching the GR/IR account in company B(Company Code B
the total difference of -xxxxx Euros is the difference I've got between the Stock In Transit and the GR/IR account in company B (Company Code B).
we are unable to locate those differences in transaction MR11, to clear it .
Pl let me know in this regard as early as possible.
Thanks and Regards,
hk

this issue needs the more involvement of Sd and MM guys apart from fico team.

I want to transfer my remaining ITunes account balance to my husband's account. Different password/Apple ID for him. How can I accomplish this?

I want to transfer my remaining ITunes account balance from my IMac to my husband's IPad. He has a different Username and Password. How do I make the transfer?

If any part of the balance from an iTunes gift card has been spent, the remainder of it can't be moved to another Apple ID through any means.
(92441)

Asset master data no "Expired useful life".

Hi expert.
Today our user tell me ,system need her that to enter the filed (ANLC-NDABJ/NDABP) of * expired useful life in year /period * in depreciation area tab . otherwise not allow to save the data.
And i found, all of asset capitalized period on 2011.12 and the start depreciation period on :2012.01 ,the Expired useful life year/period is null and requirement to input the value.
when we enrty the expired useful period.
Expired useful life 000 000 calculated by system (Check)
Message no. AA910
My question:
What's reason and how to fix it ?
Thanks,
Regards,Alex

Hi,
Usually Expired life will be displayed in Asset master once the acquisition. If your capitalization date is in the previous fiscal year (in your case: 2011.12) and in the next period you will able to see asset expired period as 01 period(assume next fiscal year is starting from 2012-01).
I guess you should maintain your capitalization and ordinary depreciation date one and the same

My MacBook Retina has been shutting off multiple times per day. It is beginning to happen more frequently. What can I do to locate the exact issue? My warranty has expired so I would like to get to the bottom of it without taking it in to an apple store.

It is beginning to shutdown with no warning more frequently. What can I do to locate the exact issue? My warranty has expired so I would like to get to the bottom of it without taking it in to an apple store.
I am currently learning how to do diagnostics on mac hardware but I am not a native mac user. It is unlikely that this is a software issue. Please, any input will be helpful.

Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
    b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
     Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
     COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and
     after the chime press and hold down the OPTION key until the boot manager screen appears.
     Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
     Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).
4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).

FI-AA NO Expired useful life

Hi 各位，
2011资产年结后，修改成了新的资产年度，但所有2011年12月入账的，2012年01月开始折旧的资产都需要没有 Expired useful life in years at start of the fiscal year/Period ，老是提示为必输项目，这两个栏位。
不知道什么原因，请各位看看.

你好
你可以通过更改折旧领域的画面设置，把这两个项目不显示。
AS02 -> Menu: Environment -> screen layout -> depreciation areas -> select a screen layout -> double click on ‘field group rules’ -> set field group ’19 Expired useful life’ and ’20 Exprd Life -Periods’ in ‘No display’.
希望对你会有所帮助
George

Function module to read the expired useful life of asset

Hi,
Is there a function module to read the expired useful life of asset. We are using the depriciation start date to calculate the expired useful life of asset, but the fiscal year shift and matching the calendar year with fiscal is causing the logic to give a month difference between the calculated value and the value in the asset.
Please let me know if there is a Function module or BAPI for getting the values. Kindly provide example for the function module call too.
Regards,
Prabaharan.G

Hi,
Check the following function modules.
AISC_CALC_EXPIRED_USEFUL_LIFE.
Check the following link it might be of some help to you.
Re: asset useful life
Regards,
Ram.

Intercompany transfer price

Hi All,
How to configure EDI for intercompany transfer price.
Regards
Nidhi

Dear Azeez
In Inter Company stock transfer scenario, it requires a transfer price which can be either PI01 which is a fixed price or PI02 which is percentage based.
Please go through this document and configure the process.
[Cross Company Sales|http://help.sap.com/bp_chemv1500/Chem_US/Documentation/Q84_BPP_EN_US.doc]
thanks
G. Lakshmipathi

Return Delivery of Intercompany Transfer Order

Dear guru ,
I want to know all the transactions for the logistic and accounting process of Return of Intercompany transfer order.
Thanks.

hi,
Can try :
ME21N Retun Intercompany Purchase Order
VL10D Create Outbound Delivery for Purchase Order Item
VL02N Post Goods Receipt for your plants....)
Post invoice based on it...
Post the credit memo....
You can make other company as a vendor....and then can go ahead...
hope it helps...
Regards
Priyanka.P

Remaining life 3 in general tab, no of month in depreciation tab is 4mos

Hi Experts,
Iu2019m trying to upload the data below. After uploading the Monthly depreciation should have been 328.33 in 3 mos.
When I check the uploaded data the monthly planned depreciation is 246.25 = 4 mos but the remaning life is still 3mos
We are using Net book value divide by remaining life, and the depreciation will start next month after depreciation.
Is there any way to tally the remaining life with the no of planned depreciation?
Inventory Number;Item Code-;Description;Short Description;Capitalization Date;Vendor Code;Vendor Name;Serial Number;User01- pic & Dept;User02- with or wiout warranty;User03;User04;APC;Quantity;APCHist;Depr 01;Depr Start date 01;Useful Life 01;Remaining Life 01;Depr Type 01;Ordinary Depr 01;Unplanned Depr 01;SpDpKey1 01;SpDpAcc1 01;SpDpKey2 01;SpDpAcc2 01;SpDpKey3 01;SpDpAcc3 01;Depr 02;Depr Start date 02;Useful Life 02;Remaining Life 02;Depr Type 02;Ordinary Depr 02;Unplanned Depr 02;SpDpKey1 02;SpDpAcc1 02;SpDpKey2 02;SpDpAcc2 02;SpDpKey3 02;SpDpAcc3 02;Depr 03;Depr Start date 03;Useful Life 03;Remaining Life 03;Depr Type 03;Ordinary Depr 03;Unplanned Depr 03;SpDpKey1 03;SpDpAcc1 03;SpDpKey2 03;SpDpAcc2 03;SpDpKey3 03;SpDpAcc3 03;Depr 04;Depr Start date 04;Useful Life 04;Remaining Life 04;Depr Type 04;Ordinary Depr 04;Unplanned Depr 04;SpDpKey1 04;SpDpAcc1 04;SpDpKey2 04;SpDpAcc2 04;SpDpKey3 04;SpDpAcc3 04
D160010R10;D160010R10_001;Magic Sing;;2005-07-01;;;;;;;;19700;1;19700;100;2005-06-30;60;3;LINP;18715.01;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
Ragards,
Amy

Hi,
From your text I can see that you have
capitalization date: 2005-07-01
start depreciation date: 2005-06-30
That does not make much sense to me, if the start depreciation is one month after capitalization date
your start depreciation date should be 2005-08-01
If I asume you starst Fiscal years on January and Year for Import is 2010 then:
You will calculate remaining useful life = 7 ( Total useful life 60 - 53 number of months counting from August 2005 until December 2009 included)
You should as well set the deprecited amount for the 53 months which is 17401 aprox, in filed Ordinary Depr 01
The system if you have decided 'monthly basis' will have equal parts for the rest on Net Book Value =2299 (Remaing NBV)/7 months
There are insteresting blogs on the subject : do search for Fixed Assets
Kind regards
Jose Antonio Castillo
SAP Business One Support

Expired Useful Life field is missing in AS91

Hi,
I'm preparing LSMW to upload asset legacy via AS91, but there is no Expired Useful LIfe for year and period. Is there any setting to set the screen layout rule for AS91? Or, it is caused by other setting?
Thanks,
CW

Hi,
It's combined in the screen layout rule for depre area.
Thanks,

Goods issue for API DI transfer

hi experts, I have SAP BO and I want to make a goods issue for API DI transfer with excel macro, is that possible??

Hi,
I think for UOM KG ,decimal places are not defined in CUNI transaction.
Please refer the link for UOM related settings
http://wiki.sdn.sap.com/wiki/x/E4zjBw
here in CUNI no of decimal places for KG its its 0,that y system is not allowing you to maintain in decimals.but it will allow you to maintain in BOM(it will give only warning message)
Hope it helps

Issue in ABT1N(Intercompany transfer) - expired/remaining life

Similar Messages

Maybe you are looking for