Issue in Adobe Interactive Forms..

Hi All,
I have created a Adobe Interactive form in WDJ. In which I have one table and below tha table I have some text. Now, at runtime, when the table rows increases, the rows are overlapping on my Text. How can I make the text below and it should happen at runtime.

Hi Nikesh,
You can try to put your table in one subform and the text in another.
Hope it helps.
Dao

Similar Messages

Heavy performance issues using Adobe Interactive Form PDFs generated by SAP BPM

Dear experts,
we use Adobe Interactive Form PDFs (generated with LiveCycle Designer) as Human Tasks within SAP BPM processes. The PDFs are generated and transmitted correctly, but when they are opened at the receivers PC, Windows freezes for 2-3 minutes, then the PDF opens and can be filled out and sent back. The next PDFs can be opened much faster, but when the PC is restarted, we get the same problem again. We use Adobe Reader XI (11.0.2) on our clients; is their any know performance issue?
Please note, that we have this problem with EVERY Adobe Interactive Form PDF... I created a simple PDF containing just a field and the client PC still freezes. So it can't be in the form or the scripting. Normal static PDFs can be opend without any problems.
Best regards,
David

They haven't really announced it, because there is no product to announce. Rather the opposite.
There are no conversion tools, so far as I know.
XFA forms are a non-starter if you want portability.
AcroForms are a nightmare in themselves, because the functionality is limited in Adobe Reader and varies between absent and weird in other products. No idea about Blackberry support.
You will not find a simple recommendation. Rather, you need to use Acroforms and carefully test everything (EVERYTHING: no assumptions) on every platform you intend to support.
Yes, rather unsatisfactory, but until Adobe realise that the future is platform equivalence or irrelevance, this is where we are.

Hanging issue - with adobe interactive forms

Hi Guys,
I' am facing the following problem with the adobe interactive forms. After the successfull completion of 6 to 7 round trips,
the form is hanging next time. Let me know if you people have faced the same issue and what was done.
Thanks,
Aravind

Hi,
Some more information on the issue. I' am using HCM forms and processes to develop the forms.
Ther problem is only happening to two forms which are more than 200Kbytes. Is there any size
restriction for the adobe forms developed. if yes, please let me know.
Thanks,
Aravind

Control not going from Adobe Interactive form to ABAP WD Event handler

Hi
I am facing an issue with adobe interactive forms and WD ABAP integration.
The buttons in adobe interactive form when clicked is going round and round and the control is not going to the ABAP code(WD ABAP event handler code whatsoever). I have also set the debugger but the control is not moving to the ABAP code from the adobe interactive form.
Can anyone help me what can be the issue here and how can I resolve the same?
Thanks.
Sid

Hi Babi,
In the adobe form layout library Use the Submit(which internally means submit to SAP) button from the Webdynpro Native category.
Only this button action can connect adobe to web dynpro.
Whenever we click on this particular button the event will be trigger in the ONsubmit event of interactive form UI element in the webdynpro.There we can write our abap code.Hope this will help you.
Regards,
Simi A M
Edited by: amsimi on Mar 22, 2011 11:37 AM

GP adobe interactive form issue

GP adobe interactive form issue
Hello All ,
My scenario :
I need to create three forms
namely 1). Initiation (1)
2). Sanction forms (2).
When I create an interactive form to accept the initiation form details & submit the data to the next form that is sanction form , I am not able to process to the next form . why is it so ?
basically I need to move from one action to another with two different forms.

Hi,
Check if you have saved and activated your interactive form callable object.
Are you using this document:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/7fad6fea-0c01-0010-56b4-8ac88b4185ab
Regards,
Mona

Web Service is not triggering using Adobe Interactive Form

Hello Experts,
I know this is a common topic now , but the problem I am facing, no thread help me to solve that.
Problem:--
My requirement is to create an adobe form , in which
-> an input field is needed,and some description is needed.
I used button to trigger my webservice.
Here , I want to clear that , I have made a proper WEB SERVICE using Remote Enabled FM.
My web service is working fine as I have tested from WS NAVIGATOR(Note: http://<source>:<port>/wsnavigator).
In Adobe Form (SFP), I have made a new Data connection using WebService WSDL.
All Request and Response parameters are availabe in Data View palletes of Form.
Button that is available from data connection is used.
I have used Button as an Execute button , under execute tab in connection , I had given DATA CONNECTION name .
But above things not worked so ,
I also tried with Regular Button , and under click written Javascript/FormCalc which is:--
var cURL = 'http://x.y.com:8012/sap/bc/srt/rfc/sap/ZMATERIAL_DESCRIPTION?sap-client=800&wsdl=1.1';
var service = SOAP.connect(cURL);
xfa.connectionSet.DataConnection2.execute(0);
But this also not worked .
So, I think there can be a little issue may be , I am forgetting to click some special atrributes in form .
Please help me and let me know what can be probable reasons that webservice is not triggering
Thanks a lot ,
Jeet

Solved my self, converted PDF into image and used that pdf as a static image in Adobe Interactive Form.

Migrating PCR frontend-JSP forms to Adobe interactive forms-WD Abap Comp

Hi All,
We are currently on Netweaver 7.0 & ECC 6.0 and ESS - MSS Business Package 50.4. We are using JSP Forms on portal front for Personnel Change Requests (PCR's ) where in all the scenarios in the backend are heavily customized with good amount of usage of Javascripts. For certain scenarios, where in a huge amount of information is fetched from ECC 6.0 backend system, JSP are performing really bad and the total time taken to display the form is actually causing a lot of irritation to the end user.
We are planning to propose an upgrade to SAP adobe interactive forms. The prerequisite is that the business wants to reuse all the customized scenarios without any changes and just want to move towards better front end forms.
My questions are:
1. Please list benefits of SAP Adobe interactive forms - ABAP component over JSP forms (performance wise)
2. Issues with SAP Adobe Interactive forms?
3. Since Javascripts do not work in Webdynpro ABAP. How can we implement those front end checks and validations.
3. Any other options available for UI that can be suggested?
All suggestions are welcome. Quick response is appreciated.
Thanks a lot for your time and help.
Best Regards,
Anupama

Is your performance issue with the Javascript with JSP pages? or the Java script you are using within the Adobe form in your WDJ custom application using Adobe form? I have worked on PCR's using ISR framework old school it used to call as PCR and now HCM Processes and form, Developed PCR's using WDJ also integrated workflow with the WDJ PCR for approval(we never had any performance issue) infact ISR frame work was kind of slow compare to custom WDJ solution and less flexible for a developer to develop.
I have also worked created WDA custom application for PCR's , WDA is definitely better when you compare it with WDJ but I have not seen much performance issue with WDJ atleast on custom PCR solutions.
I don't have any case study to share with you, can you please tell what kind of PCR's your client is using and what kind of performance issue you are experiencing and where and why you guys are using Javascript.

Adobe Interactive Form Shows Blank (WD JAVA ZCI)

Hi Expert,
I have the following problem.
I developed an Adobe interactive Form embebed in WD java app with success in DEV environment, but i have an issue in QA environment.
When i run the Adobe Form logged in portal, the application runs fine, but, when i do unlogged, WD app run fine but Adobe Form shows blank
Any idea?

Hi Sean
In the Visual Admin of the server that runs the ADS check under server->services->destinations click on http folder. There should be something under that called FP_ICF_DATA_<sid of backend>. If there is not then create one in there.
Regards
Thashin
Edited by: Thoshin Naicker on Jan 12, 2009 7:09 AM
Edited by: Thoshin Naicker on Jan 12, 2009 7:10 AM

ADOBE interactive form - Taking long time to Activate

Hi All,
We are desining ADOBE interactive form in SAP R/3 via SFP.
But the form is taking unusally too much time to get activated. Even one of the form could not even be activated.
It gave a time out error after around 3 hours.
Please help me with understanding the probable reason for this.
Thanks & Regards
Deb

debabrata mohanty,
How did you solve the issue. Please clarify me on this. I am facing the same problem.
Thanks,
Pavan

Adobe Interactive Form is displayed in Read Only mode

Hi All,
I created Adobe Interactive Form in SFP.
The following properties are set to the form.
Layout Type -ZCI Layout
Preview Type - Interactive Form
XDP Preview Format - Acrobat 7.0.5 Dynamic PDF
In PDF preview tab, I can enter data into the Text Fields.
I added this form in a web dynpro ABAP application using Interactive Form UI element.
The following properties are set to the UI element.
DataSource - bound to the context
displayType - native
enabled - checked
templateSource - Formname
readonly - unchecked.
When I run this application, the form is displayed in readonly mode.
I can't enter any data into the text field.
Any of you guys know that how to resolve this?
Thanks
Thruna

Hi,
I already face the same issue and after several days working on this issue and many hours on debugging it seems that interface type is very important if you want to use the form in WD4A (this requirement is confirmed by SAP thru an OSS message for me )
Does the interface based on DDIC or XML ?
If it's a DDIC interface , sorry that can't works in WD4A as interactive forms. You must define the interface as based on XML for this .
Hope this help you.
PS : Finally ,as my forms was very complicated my customer decide to not make it available in WD4A .....

Adobe Interactive Form Not Editable

Hi,
I have created Adobe Interactive Form using Web Dynpro Java Application.When i run the application i get the pop up message [The document enabled extented features in Adobe Reader.The document has been changed since it was created and use of extended features is no longer available.please contact the author for the original version of this document.].When i click for the pop up message the form is not interactive.If there is Adobe Life Cycle Designer and Adobe Reader version problem for this.Let me know if any one facing the same issue.
Regards,
SatheshKumar R

Hi Satheesh,
1. Check the Adobe form Version (from 7.1 to 8)
2. Installed Adobe form Extended Language Support Font Pack to Adobe ,if you are using some other language in Adobe form
3. Check the ADS Version.

Adobe Interactive Form is not working - Specify Stream Source

Hi Experts:
I am having an issue, where the system I am on is SAP ERP Central Component 5.0 (ECC5.0). There is no Layout Tab to define ZCI or xACF in transaction SFP. I'm not sure if this is relevant, except that, I cannot get my custom Interactive form to work.
All PDF tests in SAP are passing, but being on ECC5.0, I do not have the following programs (among many others):
FP_CHECK_DESTINATION_SERVICE
FP_CHECK_HTTP_DATA_TRANSFER
When I call my Adobe Interactive Form and set sfpdocparams-fillable = 'X' I get an error:
Error creating PDF Document -PDF Exception: Stream does not represent a PDF document.
I have applied the Usage Rights credential properly and my form displays read-only when sfpdocparams-fillable = BLANK. While in transaction SFP, I can see that my interactivity works when displaying the form through the Preview PDF tab.
Also, I know that my credential works because when I test form ISR_FORM_SPEG, I do have interactivity.
In parsing through the ADS log file of my custom AIF, I noticed the following:
    Parse template node
        Template:
            Source = Stream
            Name = TEMPLATE
But I believe it should be something like:
     Parse template node
         Template:
             Source = URL
             Name = dest:FP_ICF_DATA_<My_System_ID>//sap/bc/fp/form/layout/<My_Form_Name>.
Does anyone have any suggestions as to how I can change the source of my stream?
Thanks for your time experts,
Sean

Hi Sean
In the Visual Admin of the server that runs the ADS check under server->services->destinations click on http folder. There should be something under that called FP_ICF_DATA_<sid of backend>. If there is not then create one in there.
Regards
Thashin
Edited by: Thoshin Naicker on Jan 12, 2009 7:09 AM
Edited by: Thoshin Naicker on Jan 12, 2009 7:10 AM

Calling webservice in Adobe interactive form

Hi,
I have a webservice created for a function module which in turn calls the BAPI_PR_CREATE (purchase requisition creation) BAPI. I am trying to call this webservice from an Adobe interactive form I've created. Basically the user will enter all necessary data inside the form and when he presses a button the webservice should be called and the purchase requisition should be created.
My question is what type of "Control type" should I use for the button "Regular", "Execute" or "Submit" and how should the javascript code look like?
I have tried a lot of solutions that I've found on the internet but nothing worked.
The ADS service is not yet installed, I know that this is a big issue but could this affect the functionality or could this be the cause why nothing seem to work?
Thank you and Best Regards,
Mihai

Hi Florian,
thank you for the given information.
Unfortunatelly I was waiting for a long time from the BASIS team to install the ADS. Yesterday they've told me it's finally done.
Consequently I started to retest the solutions I've found but with no result so far.
I've tried to make the button an "Execute" control type and added the Connection inside the Execute tab.
I've also tried with the following javascript inside the xml file (inside the click event of the button) and all of the button control types:
var tempsoapAddress = xfa.connectionSet.DataConnection.getElement("soapAddress").value;
var tempwsdladdress = xfa.connectionSet.DataConnection.getElement("wsdlAddress").value;
var ServerPath = body.systemConfig.system.rawValue;
var client = <Get Client from a data attribute>
var Soap_PreServerPort = "http://";
var Soap_PostServerPort = "/sap/bc/soap/rfc?sap-client=";
var SoapAddress = Soap_PreServerPort + ServerPath + Soap_PostServerPort + client ;
var Wsdl_PreServerPort = "http://";
var Wsdl_PostServerPort1 = "/sap/bc/soap/wsdl11?services=ZBAPI_PO_CREATE2&sap-client=";
var wsdlAddress = Wsdl_PreServerPort + ServerPath + Wsdl_PostServerPort1 + client ;
xfa.connectionSet.DataConnection.getElement("soapAddress").value = SoapAddress;
xfa.connectionSet.DataConnection.getElement("wsdlAddress").value = wsdlAddress;
xfa.connectionSet.DataConnection.execute(0);
xfa.connectionSet.DataConnection.getElement("soapAddress").value = tempsoapAddress;
xfa.connectionSet.DataConnection.getElement("wsdlAddress").value = tempwsdladdress;
xfa.connectionSet.DataConnection = null;
I've also found that maybe I should have attached the following roles and authorization objects to my user:
Authorization objects: S_USER_PRO, S_SERVICE and S_ICF_ADMIN, S_SRT_ADM
Roles:
a) SAP_BC_WEBSERVICE_ADMIN
b) SAP_BC_WEBSERVICE_ADMIN_BIZ
c) SAP_BC_WEBSERVICE_ADMIN_TEC
d) SAP_BC_WEBSERVICE_CONSUMER
e) SAP_BC_WEBSERVICE_DEBUGGER
f) SAP_BC_WEBSERVICE_OBSERVER
g) SAP_BC_WEBSERVICE_SERVICE_USER
Do you have ideea what could be the issue? Can you give me another solution?
Thank you and Best Regards,
Mihai

Error while opening Adobe Interactive form.

Hi ,
We have few custom applications which contains an adobe interactive form. When it is getting called it throws the following error.
com.sap.tc.webdynpro.clientserver.adobe.pdfdocument.base.core.PDFDocumentRuntimeException: Failed to UPDATEDATAINPDF
com.sap.engine.services.webservices.jaxrpc.exceptions.XmlUnmarshalException: XML Deserialization Error. Invalid parser state. This exception is caused when deserializing XML type [http://www.w3.org/2001/XMLSchema]<base64Binary> and wrong XML node is found.
Kindly guide me how to resolve this issue.
Best Wishes
Idhaya R

Hello Idhaya,
Does this forum thread help?
Re: Error in Risk Analyzer of Access Enforcer
Also, when troubleshooting XML errors, I like to open the input source XML in a web browser or validate the markup online at:
http://validator.w3.org/
--- Scott

Error while processing ADOBE interactive form

Hi,
I get following error when I try to submit an ADOBE interactive form.
FormPostprocessor.ERROR_NO_DEFAULT_USER_FOR_ROLE
com.sap.caf.eu.gp.base.exception.EngineException: FormPostprocessor.ERROR_NO_DEFAULT_USER_FOR_ROLE
at com.sap.caf.eu.gp.model.iforms.postproc.FormPostprocessor.createProcessRoleInstance(FormPostprocessor.java:176)
at com.sap.caf.eu.gp.model.iforms.postproc.FormPostprocessor.prepareProcessRoles(FormPostprocessor.java:157)
at com.sap.caf.eu.gp.model.iforms.postproc.FormPostprocessor.initiateProcess(FormPostprocessor.java:289)
at com.sap.caf.eu.gp.model.iforms.postproc.FormPostprocessor.processData(FormPostprocessor.java:564)
at com.sap.caf.eu.gp.model.iforms.FormPostProcessor.doPost(FormPostProcessor.java:182)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run
(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Please help.
Ashutosh

I managed to sort the issue.
It is not related to the ADS configuration.
I had to assign all the default roles of process to the user /role.
Thanks a lot for reply.

Issue in Adobe Interactive Forms..

Similar Messages

Maybe you are looking for