Issue in Develop mode for embedding google map

Hello,
I am facing an interesting issue in Develop mode for embedding google map html code (screenshot is attached)
The map rectangle showing almost same size box underneath filled in black, while in preview mode, it is working properly. I could not find the reason, where I am doing something wrong.
Many thanks .

Hi Muzeone,
Its a default behavior with every WYSIWYG HTML Designer or editor,
Reason :The black box which is appearing in the design view is because you might have tried increasing the size of the iframe thumbnail.
If you are using Iframe and using Insert HTML feature in MUSE, make sure when you paste the iframe code in MUSE, it creates a thumbnail in design view do not resize it in design view.
Size does not change the height and width of Iframe in MUSE as its being controlled by the codes that you are inserting.
The design view will only show you iframe height which is defined in the codes below that it will show a black box.
Enjoy working with MUSE !!
Thanks
Prabhakar Kumar

Similar Messages

  • Error "a plugin is needed to display this content" for embedded Google map, but no plugin identified.

    When I try to view a page that has a Google map embedded on the page, I get the error message "a plugin is needed to display this content". However, I don't know what plugin, where to get it, etc. I've tried searching for this issue but haven't been able to come up with anyone else experiencing a similar issue, nor does there seem to be a plugin for Google Maps that I can find.
    The page is here:
    http://osiama.org/lodges#
    The map displays when one of the links is clicked in the table.

    I'm not sure why, but the site uses <embed> for the map instead of <iframe>.
    When Firefox wants to render an <embed>, it needs to know what type of object is being embedded, and the site doesn't supply that information, so you see a generic "I don't know how to handle this" error.
    Unfortunately, I don't think there is a quick workaround for you as the end user. If you are the type to tinker, you can manually edit the code of the page in the web console as follows:
    * right-click the plugin message and choose Inspect Element (Q) - the web console will open to the Inspector, with the <embed> element selected (screen shot #1)
    * double-click embed and edit it to iframe, then press Enter to finish the edit
    * Firefox will now load the map (screen shot #2)
    This isn't a general fix-all for plugin errors, and ultimately the site will need to change this.

  • Embedded google maps disappear upon launch

    First of all - amazing product! I am still going through the enormous amount of features.
    I am now trying to create an ibooks author widget to display an embedded google map in my ibook. I have done it according to the instructions described in your help page, but I must be doing something wrong - when I double click on the widget, the map loads, but inmediately dissapears, showing just the background layer (and there's no turning back). I have not touched any settings, nor added any styles. I have only added the embed code inside the html layer.
    Does anyone know what I might be doing wrong? It's probably just a newbie mistake, but I am completely lost. Any ideas will be deeply appreciated.
    Thanks for reading.

    Do you have any restrictions on Google's use of cookies or local storage? Do you notice any different logged in vs. logged out of your Google account? Have you tested with your extensions disabled?
    I was going to suggest zoom, but it sounds as though you have reset zoom. Note that when Google Maps is framed, the reset might not drill down into the framed page; I should test that.
    These threads were along the zoom lines, but not resolved. Might be something here you haven't tried?
    * [https://support.mozilla.org/questions/954901 Google Map photos only show at 100% zoom]
    * [https://support.mozilla.org/questions/956304 Google maps location arrows do not display]
    If you are missing pins/icons hosted on a different site, perhaps: [http://forums.mozillazine.org/viewtopic.php?f=25&t=2359775 My own Google Map icons are not visible in Firefox 8 (mozillaZine Forums)].

  • When using the iPad 2 to browse the National Weather Service the embedded Google map can not accurately point to the correct location when tapped.  Is there a solution?

    For example, using the iPad to check various locations around Davis, ca on the NWS website, the embedded google map is grossly off location.
    http://forecast.weather.gov/MapClick.php?CityName=Davis&state=CA&site=STO&textFi eld1=38.545&textField2=-121.739&e=1
    Then, using the ipad, if I tap on Sacramento, I get a location to the southeast near Angel's Camp.
    This problem occurs also on embedded map at summitpost.org.  Same problem (Also a Google map).  Tap on a point and it displays info of an area off of where I was looking.
    Thanks!
    -vernon
    Same problem with iPhone.  Use to work with an earlier version of Operating System.

    The website may alter its page display based on the browser ID that is transmitted to the site from your browser. Some browsers on the iPad like iCab allow you change the browser ID to something desktop-oriented. Safari does not provide this capability.

  • Best tutorial for installing Google maps on 10.2.1?

    Hi, 
    Can anyone recommend a good tutorial for installing Google maps on 10.2.1?  
    Including where to download the APK (I've looked for a while and it feels like I'm trying to find a TV show for download).  Is there a ways to do this directly grom Google's Android sites?
    Thanks,
    Dave

    You'll find clear, detailed directions to install Snap, here:
    http://supportforums.blackberry.com/t5/Downloaded-Applications-for/You-Upgraded-to-OS-10-2-1-and-wan...
    I don't know why elessar says there is no way to load Google Maps, it does not require Google play services at all. Quite simple.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Issue with embedded google map

    When copying and pasting html from google maps to my website, the map shows correctly in preview mode.  After publishing however, the target property is no longer at the center of the map but off the map at the extreme upper left hand corner.  Any suggestions?

    site is: www.netlease.net, maps are embedded on 'Available' page

  • Embeded Google map (iframe) not displaying correctly after jquery .fadeIn?

    Hi,
    I have created a popup window that displays a Google Map after a button is clicked. The map works fine if the popup window =display:block. But as soon as you give the popup window display:none and use jquery to display the window them map doesn't load correctly.
    Any help would be great.
    See jsfiddle for code.
    This is what the map should look like after the "Venue" button is clicked using jquery fadeIn.
    Thanks

    Anakin-
    I'm getting a decompression error when downloading your site.
    you might try...
    var container = sym.$("container");
    var map = '<iframe width="'+container.width()+'" height="'+container.height()+'"   frameborder="0" scrolling="no" marginheight="0" marginwidth="0" src="https://maps.google.com/maps?f=q&source=s_q&hl=en&geocode=&q=7120+Boul       +St+Laurent,+Montreal,+QC,+Canada&aq=0&oq=7120+boul+st&sll=45.534114,   -    73.617124&sspn=0.006907,0.016512&ie=UTF8&hq=&hnear=7120+Boulevard+Sai   n   t-Laurent,+Montr%C3%A9al,+Communaut%C3%A9-Urbaine-de-Montr%C3%A9al,+Q u    %C3%A9bec+H2S,+Canada&t=m&z=14&ll=45.534114,-73.617124&output=embed"></iframe>';
    container.html(map);

  • Sales & Marketing Online MapIt URL Maps feature for Addresses Google Maps

    We recently enabled the MapIT URL functionality so our users can see street maps from Yahoo from Sales Online when they click on the Map it icon associated with all addresses in Sales and Marketing Online.
    See Metalink 280542.1 for how to enable this in the Ebusiness Suite.
    Two questions:
    1. We would like to use Google Maps; does anyone know how this can be done?
    2. Our business is in Australia. By default we hide Australia as a county on our addresses. This prevents us from seeing maps for addresses in Australia. Any body know a way around this?
    Image for clarification can be found here: http://www.orafaq.com/forum/t/90720/0/

    Sorry mate looks like it is not straight forward change that you can make to use Google instead of Yahoo.
    You may need to use Google Maps APIs and try to build your own URL and update the profile option.
    I am hoping in next version of Oracle Apps has out of the box functionality to use Google maps.

  • Embedding google map in Indesign for DPS

    Has something changed with the lastest update ....?
    In the past, when I needed to place a embed a map, I just went to google pick up the embed code and Cmd V into Indesign.  I'll see a static image but it is "live" when when tested on the iPad.
    Since the update, this does not seem to work anymore... the embedded code is not a static image on on iPad during testing. 
    Am I the only one experience this issue?  Or am I doing soehting wrong?
    Thanks for any help.

    Thanks Bob.  I could have sworn that I downloaded the lastest update!  I had just downloaded the update again and checked the dates.  The last update I had was the version of 23 jan 2013.  The one I just downloaded as per your advice was 30 Jan 2013.   Seems to be working again!
    Michael

  • Problems embedding google maps

    Hello, I'm trying to emmbed this map in to indesign by pasting directly
    <<***And this is what i get***>>
    Does anyone knows why??
    Thanks for your help

    Google changed something
    Try a bing map instead. They work fine.

  • Html Widget to compensate for lost Google Maps

    The html widget works BUT,   whenever the map is touched to move or view larger = apppearance of full html code over the map . . .
    Assistance is appreciated.
    Nathan B

    Roddy:
    I did as you suggested and published the entire site/changes to a desktop folder.
    Voila !
    I dont' fully understand, but you are absolutely correct and I am grateful in the extreme.
    I hope I might be able call upon you for a few questions if they come up and I am unable to research and resolve them myself.  The site will be for my wife - a physician, and so  the site will need to elegant in its simplicity;  no 64pt fonts in bold mixed colors, no wiggles or jiggles, or sound.  Easy on the eyes.  Accessible to the mind.
    Kudos to you and many thanks again
    Nathan B

  • Google Map Hangs when launching for more than 2 tasks from Dispatch Centre

    Hi All,
    I am facing one issue when trying to launch the Google Map for more than two tasks.
    I am launching it from Dispatch centre.
    Can anyone please help me on this issue.
    Thanks,
    Anoop

    Hi All,
    Can anyone please help me on this issue...
    Thanks
    Anoop

  • Adobe Widget browser "Google Map" Search box for address

    First of all I would like to thank Zizzer Zazzer for this google map. I ts really very helpful for the website. I was wondering if this is possible to add text search box for the address in google map? I was trying my self and tried with geocode with no success.If any one of you know about this then plz let me know. Here is my code
    <input type="text" id="search_address" value="" size="98"/>
    <button onclick="search();">Search</button>
      <div id="mapCanvas" style="width:100%; height:100%; min-width:300px; min-height:300px"></div>
    <script type="text/javascript">
    // initialize the google Maps 
         function initializeGoogleMap() {
      // set latitude and longitude to center the map around
      var latlng = new google.maps.LatLng(37.77,
               -122.4);
      // set up the default options
      var myOptions = {
        zoom: 8,
        center: latlng,
        navigationControl: true,
        navigationControlOptions:
         {style: google.maps.NavigationControlStyle.DEFAULT,
        position: google.maps.ControlPosition.TOP_LEFT },
        mapTypeControl: true,
        mapTypeControlOptions:
         {style: google.maps.MapTypeControlStyle.DEFAULT,
        position: google.maps.ControlPosition.TOP_RIGHT },
        scaleControl: true,
         scaleControlOptions: {
              position: google.maps.ControlPosition.BOTTOM_LEFT
        mapTypeId: google.maps.MapTypeId.ROADMAP,
        draggable: true,
        disableDoubleClickZoom: false,
        keyboardShortcuts: true
      var map = new google.maps.Map(document.getElementById("mapCanvas"), myOptions);
      if (true) {
       var trafficLayer = new google.maps.TrafficLayer();
       trafficLayer.setMap(map);
      if (true) {
       var bikeLayer = new google.maps.BicyclingLayer();
       bikeLayer.setMap(map);
      if (true) {
       addMarker(map,37.7715,-122.4,"We are here");
       window.onload = initializeGoogleMap();
      // Add a marker to the map at specified latitude and longitude with tooltip
      function addMarker(map,lat,long,titleText) {
        var markerLatlng = new google.maps.LatLng(lat,long);
       var marker = new google.maps.Marker({
            position: markerLatlng,
            map: map,
            title:"We are here",
       icon: ""});  
      var addressField = document.getElementById('search_address');
    var geocoder = new google.maps.Geocoder();
    function search() {
        geocoder.geocode(
            {'address': addressField.value}, 
            function(results, status) { 
                if (status == google.maps.GeocoderStatus.OK) { 
                    var loc = results[0].geometry.location;
                    // use loc.lat(), loc.lng()
                else {
                    alert("Not found: " + status); 

    Come on guys....!!Any one here to answer or any one knows about it?

  • Google maps has gone away from ios6 and apple maps doesnt work well for India. Stuck ??

    Apple released there own maps, and got away with google maps....Now, For lots of countries like India etc , apple maps arent done well yet... and google had a wonderful support all across lots of countries. Getting away from google maps has made us stuck with maps functional on iphone4 and ios6.
    This is not working well updating ios6 and we are losing biggest use of iphone (Maps)

    3 Good Alternatives for India
    Google maps web app(maps.google.co.in) 
    Nokia maps web app(m.maps.nokia.com) 
    Navfree GPS Live India https://itunes.apple.com/in/app/navfree-gps-live-india/id434595644?mt=8
    You can refer the below url for more information
    http://ebloggergeneric.blogspot.in/2012/09/alternatives-to-ios6-maps.html

  • AT10-a-104 : Developer mode

    I just called the US support team to get information form them about my brand new AT10-a-104 tablet. I spoke to 5 different people and all of them told me that Android is not a Linux Operating System. It appears that there is a serious training issue with the US support team. I suspect it is across all of the Toshiba support teams too.
    My reason for calling the US support team is because I tried to find information about enabling Developer Mode on the device. Specifically I wanted to connect via adb to the device from my Linux and Mac computers. Funnily enough my Linux computer is actually a Toshiba Tecra M5 and I also happen to use it for some pretty advanced Android software and Firmware development. It seemed strange to me that there was not a developer mode for the device as I have come to expect a high standard from my experience with the Toshiba Tecra M5. Still going strong after several years of constant use.
    Anyway while I was waiting for the US support team to answer the phone while also patiently waiting to be connected with someone in their team who knew anything at all about software deveopment or pretty much any general information about Linux I actually found the answer over on the Thrive forums website. 
    Tap Settings->About tablet->Build Number 7 times to unlock Developer mode in the Settings menu. This is a neat trick but it really should be made more obvious for serious professional developers who are interested in programming for the range of Toshiba Android Tablets. Why not put up a webpage specifically with that information. At least you could add it to the Windows driver download page. for those of us who do not use Microsoft products.
    http://support.toshiba.com/sscontent?docId=4001814
    The company I work for is in the position to purchase 20 - 50k of these devices and if I wasn't able to get developer mode working it would have been a show stopper. We are still unsure because of the lack of other developer tools. Even Archos and Allwinnner provide a more complete Development toolset. At the very least it would be good to have an official Android Developer Firmware edition with the disclaimer that warranty would be void after installation.
    Check out the Archos Tools if you want a good example of a fairly reasonable middle ground to keep the legal types from fraking out while also making your hardware accessible to industrial scale customers.
    Even better is to offer a link for purchasing the full Android SDK for a reasonable price. Usually between $2k - $5k depending on the sales person. That would be a real deal sweatener for us and I'm sure other companies would be interested in that option too.
    BTW, you really should pay someone to respond more regularly on thie forums. It ssems like no one from Toshiba is monitoring the Tablet forums at all. That is not a good look when combined with the lack of training on display with your US support team. Definitely not leading innovation when it comes to support and documentation of the Android devices.

    Unfortunately...another Android firmware version cannot be installed at your own hand.
    The update can be done only via Toshiba Service Station. Of course if available.

Maybe you are looking for