Issue with embedded google map

When copying and pasting html from google maps to my website, the map shows correctly in preview mode. After publishing however, the target property is no longer at the center of the map but off the map at the extreme upper left hand corner. Any suggestions?

site is: www.netlease.net, maps are embedded on 'Available' page

Similar Messages

Issue in Develop mode for embedding google map

Hello,
I am facing an interesting issue in Develop mode for embedding google map html code (screenshot is attached)
The map rectangle showing almost same size box underneath filled in black, while in preview mode, it is working properly. I could not find the reason, where I am doing something wrong.
Many thanks .

Hi Muzeone,
Its a default behavior with every WYSIWYG HTML Designer or editor,
Reason :The black box which is appearing in the design view is because you might have tried increasing the size of the iframe thumbnail.
If you are using Iframe and using Insert HTML feature in MUSE, make sure when you paste the iframe code in MUSE, it creates a thumbnail in design view do not resize it in design view.
Size does not change the height and width of Iframe in MUSE as its being controlled by the codes that you are inserting.
The design view will only show you iframe height which is defined in the codes below that it will show a black box.
Enjoy working with MUSE !!
Thanks
Prabhakar Kumar

Embedded google maps disappear upon launch

First of all - amazing product! I am still going through the enormous amount of features.
I am now trying to create an ibooks author widget to display an embedded google map in my ibook. I have done it according to the instructions described in your help page, but I must be doing something wrong - when I double click on the widget, the map loads, but inmediately dissapears, showing just the background layer (and there's no turning back). I have not touched any settings, nor added any styles. I have only added the embed code inside the html layer.
Does anyone know what I might be doing wrong? It's probably just a newbie mistake, but I am completely lost. Any ideas will be deeply appreciated.
Thanks for reading.

Do you have any restrictions on Google's use of cookies or local storage? Do you notice any different logged in vs. logged out of your Google account? Have you tested with your extensions disabled?
I was going to suggest zoom, but it sounds as though you have reset zoom. Note that when Google Maps is framed, the reset might not drill down into the framed page; I should test that.
These threads were along the zoom lines, but not resolved. Might be something here you haven't tried?
* [https://support.mozilla.org/questions/954901 Google Map photos only show at 100% zoom]
* [https://support.mozilla.org/questions/956304 Google maps location arrows do not display]
If you are missing pins/icons hosted on a different site, perhaps: [http://forums.mozillazine.org/viewtopic.php?f=25&t=2359775 My own Google Map icons are not visible in Firefox 8 (mozillaZine Forums)].

When using the iPad 2 to browse the National Weather Service the embedded Google map can not accurately point to the correct location when tapped. Is there a solution?

For example, using the iPad to check various locations around Davis, ca on the NWS website, the embedded google map is grossly off location.
http://forecast.weather.gov/MapClick.php?CityName=Davis&state=CA&site=STO&textFi eld1=38.545&textField2=-121.739&e=1
Then, using the ipad, if I tap on Sacramento, I get a location to the southeast near Angel's Camp.
This problem occurs also on embedded map at summitpost.org. Same problem (Also a Google map). Tap on a point and it displays info of an area off of where I was looking.
Thanks!
-vernon
Same problem with iPhone. Use to work with an earlier version of Operating System.

The website may alter its page display based on the browser ID that is transmitted to the site from your browser. Some browsers on the iPad like iCab allow you change the browser ID to something desktop-oriented. Safari does not provide this capability.

Issue with a graphical mapping -

Hi folks,
I have an issue with a graphical mapping.
We are replicating the Material Master, with an interface of ECC -> PI -> JDBC.
The idoc we are using is the MATMAS.MATMAS05, and in the database we created 5 tables, simulating the structure of the source idoc. The tables are: MARA, MARC, MARD, MBEW, MAKT.
The fact is that we need some data of some segments (tables) in another ones.
In this case we I need to take a value of the segment E1MARCM (MARC) to the MBEW table. The value is: SERNP.
The condition to copy that value is the centre (WERKS). So, the condition will be:
If MBEW-WERKS == MARC-WERKS,
then MBEW-SERNP = MARC-SERNP.
The problem I'm having is that I have to lookup in many different E1MARCM segments, and the relation is not 1...1, nor, E1MBEWM is a child of it (they are in the same level.)
For example there could come:
- E1MARCM_1 (WERKS = 0001)
- E1MARCM_2 (WERKS = 0002)
- E1MARCM_3 (WERKS = 0003)
- E1MBEWM_1 (WERKS = 0001)
- E1MBEWM_2 (WERKS = 0002)
- E1MBEWM_3 (WERKS = 0002)
- E1MBEWM_4 (WERKS = 0003)
- E1MBEWM_5 (WERKS = 0003)
Am I clear with the requirement?
Any answer will be greatly appreciated.
Thanks in advance.
.Juan.

Hey folks, any advice or input about this?
Thanks again.
Juan

Error "a plugin is needed to display this content" for embedded Google map, but no plugin identified.

When I try to view a page that has a Google map embedded on the page, I get the error message "a plugin is needed to display this content". However, I don't know what plugin, where to get it, etc. I've tried searching for this issue but haven't been able to come up with anyone else experiencing a similar issue, nor does there seem to be a plugin for Google Maps that I can find.
The page is here:
http://osiama.org/lodges#
The map displays when one of the links is clicked in the table.

I'm not sure why, but the site uses <embed> for the map instead of <iframe>.
When Firefox wants to render an <embed>, it needs to know what type of object is being embedded, and the site doesn't supply that information, so you see a generic "I don't know how to handle this" error.
Unfortunately, I don't think there is a quick workaround for you as the end user. If you are the type to tinker, you can manually edit the code of the page in the web console as follows:
* right-click the plugin message and choose Inspect Element (Q) - the web console will open to the Inspector, with the <embed> element selected (screen shot #1)
* double-click embed and edit it to iframe, then press Enter to finish the edit
* Firefox will now load the map (screen shot #2)
This isn't a general fix-all for plugin errors, and ultimately the site will need to change this.

Issues With PDF Template Mapping

Hi all,
Oracle BI Publisher for Windows 10.1.3.2.1
Oracle Publisher Desktop 10.1.3.2.1
Adobe Acrobat 5.0.5
Broswer IE 6.0.29
I have created a report based on a single database table (DEMO.PRODUCTS) but am experiencing problems when I try and map the form fields in PDF Template to my sample XML file.
I created a PDF Template and uploaded this template to my Layout. This PDF Template has two form fields on it (PRODUCTNAME and UNITPRICE, which incidentally are the names of the database columns I want them to map to).
I have also uploaded my sample XML data file and therefore have access to the Map Form Fields button on my report definition. However, when I click on the button a new window opens with the Map PDF Form Fields and a dialog to "Click on each highlighted...." and then hangs. When I close the window I receive a message about an Adobe Acrobat error.
If I try and do the same thing in Firefox then I receive a message in the JavaScript Console:
Acrobat Database Connectivity Built-in Functions Version 5.0
Acrobat EScript Built-in Functions Version 5.0
Acrobat Annotations / Collaboration Built-in Functions Version 5.0
TypeError: app.execDialog is not a function opened this in Adobe Acrobat
Any suggestions or comments appreciated.
Many thanks,
Gary.

Hi Aashish,
I suggest you to check the RTF Template of your report ....as if your xml output file on submit request form--->diagnostic --->view xml ...is generated ... it means that your data defination file is perfectly fine but there is issue with your rtf template....may be some of grouping or tag is not put properly...
one thing i want to suggest you to pls save that data file as .xml extension and upload in rtf u designed on youe desktop.... check theprview if its coming fine or not.
let me know if u still facing the same problem.
regards
Ratnesh P

Issue with custom fields mapping from CRM to ECC.

Hi all,
I have issues with replicating custom fields in a Service order. I have created new fields with EEWB and EEWC. Now the structure has been changed in ECC and CRM. But i have to map this fields to correct structures. Also i need some logic to apply.
But i have addressed in couple of threads about the custom function module as in user exit for FI generation.
But i didnt understand the concept of this custom function module. why is this been used?
Could anyone let me know with an good example on how this has to be acheived.
Points are highly awarded.
Kindly reply me.
Thanks,
Kiran...

Hi,
Here you go,
After you create custom characteristics.
1. Do Assign category.
2. Map contents.
3. Double check your master catalog has the mapped content.
4. Publish master catalog.
As per your message, you are not having any error message during import, which tells me that you are one step to close.
Cheers, Renga

Issue with embedding and usage of worklist TF in ADF app

In our application, we have embedded the worklist TF from "adflibTasklistTaskflow.jar" in our jspx page. Below is the page def binding for the TF
<taskFlow id="taskListtaskflowdefinition1"
taskFlowId="/WEB-INF/taskList-task-flow-definition.xml#taskList-task-flow-definition"
activation="deferred"
xmlns="http://xmlns.oracle.com/adf/controller/binding">
<parameters>
<parameter id="federatedMode" value="false"/>
<parameter id="showActionDropdown" value="true"/>
<parameter id="showViewFilter" value="true"/>
<parameter id="showAssignmentFilter" value="true"/>
<parameter id="showStatusFilter" value="true"/>
<parameter id="showSearchControl" value="true"/>
<parameter id="showTaskTabs" value="false"/>
<parameter id="displayColumnsList"
value="title, state, creator, assignedDate"/>
</parameters>
</taskFlow>
Issue
When we try to re-assign the claimed task in the worklist, it opens up a re-assign popup - "Identity browser".
Within Reassign Screen:
- Select "All" value on the dropdown
- Enter a last name on the text field. I.e. "Kristoffersson"
Or enter an email address.
- SOA error will appear as mentioned below
"Search failed with an error. Service error.. Refer to the log file that is configured for oracle.soa.services.identity for more details on this error and contact Oracle Support Services"
This issue is not seen for any other option in the drop down other than "All" (e.g. "users", "group", etc. it is displaying all corresponding search results of users from LDAP)
Below are the library which we have added in our UI project:
I. BPM worklist components
1) adflibTasklistTaskflow.jar
2) adflibWorklistComponents.jar
II. BPM Workflow
1) bpm-services.jar
2) bpm-infra.jar
III. BPM taskflow
1) bpm-workflow-datacontrol.jar
IV. BPM services
1) bpm-services.jar
Is there anything missing from the uptake? Please suggest.
Also, is there any uptake document for the same (embedding human worklist into a page)?

Hi,
I remember a similar issue with inner frames that should be fixed in JDeveloper 10.1.3.3. The problem was that the ADF Faces JavaScript did not get the correct document root.
Frank

Problems with Embedded classes mapping

Hi,
I'm experiencing problems for table generation with the following case:
a class declares two fields; one of them typed as a subclass of the other; both fields annotated with @Embedded; the subclass uses the annotation @AttributeOverride to avoid column names duplication.
When the tables are generated, one of the field (the most specialized one) is simply omitted by the JPA implementation...
To illustrate my problem, here is an example:
@Entity
public class Bar implements Serializable {
     @Embedded
     protected Foo foo = null;
     @Id
     @GeneratedValue(strategy=GenerationType.SEQUENCE)
     protected long id = -1;
     @Embedded
     protected SubFoo subFoo = null;
     public Bar() {
                super();
        // getters & setters
@Embeddable
public class Foo implements Serializable {
     @Column
     protected String bar = null;
     @Column
     protected String foo = null;
     public Foo() {
          super();
        // getters & setters
@Embeddable
@AttributeOverrides({
     @AttributeOverride(name="bar", column=@Column(name="subbar")),
     @AttributeOverride(name="foo", column=@Column(name="subfoo"))
public class SubFoo extends Foo {
     public SubFoo() {
                super();
}The generated table BAR contains only 3 columns: ID, FOO, BAR...
...and what I expect is two additionnal columns named SUBFOO & SUBBAR!
Can someone tell me: if I definitely need to go back to school (I'm obviously not an EJB expert), or how to make it work as I expect...?
Thanks
-Jerome

I found the note in the EJB specs that clearly states that my issue has no solution at this time:
"Support for collections of embedded objects and for the polymorphism and inheritance of embeddable classes will be required in a future release of this specification."
EJB 3.0 specs - final release - persistence, page 23, note 10 in section 2.1.5

Spry tabbed panels with a Google map?

I am building a website with a CS4 Spry tabbed panel (fixed size). On one of the tabs I have a Google map. All works well except.... When I am on a tab different from the map tab and resize the browser window, when I go to the map tab the map does not display or work correctly. A small amount of the map will display in the upper left of the tab panel.
Any ideas?
Thanks, any help is appreciated.
-David
<div id="mainContent">
<h2 id="pageheader">Garden Tours and Events</h2>
<div>
<div id="TabbedPanels1" class="TabbedPanels">
<ul class="TabbedPanelsTabGroup">
<li class="TabbedPanelsTab" tabindex="0">Map</li>
<li class="TabbedPanelsTab" tabindex="0">Text</li>
</ul>
<div class="TabbedPanelsContentGroup">
<div class="TabbedPanelsContent" id="map" style="height: 500px; width: 770px;">
<script type="text/javascript">
</script>
</div>
<div class="TabbedPanelsContent" style="height: 500px;">
<p> </p>
<p> </p>
<table border="0" id="gardenTourData">
<tr>
<th scope="col">Date</th>
<th scope="col">State</th>
<th scope="col">City</th>
<th scope="col">Event Type</th>
<th scope="col">Id</th>
<th scope="col">Coordinates</th>
</tr>
<?php do { ?>
<tr onClick="window.open('http://localhost/details.php?id=<?php echo $row_rsListGardenTours['id'] ?>','detailsWindow','width=656,height=600,scrollbars=yes')" >
<td><?php echo $row_rsListGardenTours['tour_date']; ?></td>
<td><?php echo $row_rsListGardenTours['state']; ?></td>
<td><?php echo $row_rsListGardenTours['town_city']; ?></td>
<td><?php echo $row_rsListGardenTours['event_type']; ?></td>
<td><?php echo $row_rsListGardenTours['id']; ?></td>
<td><?php echo $row_rsListGardenTours['start_location_coordinates']; ?></td>
</tr>
<?php } while ($row_rsListGardenTours = mysql_fetch_assoc($rsListGardenTours)); ?>
</table>
</div>
</div>
</div>
</div>
</div> 

It is best to check the forum first before asking for assistance.
Have a look here http://forums.adobe.com/message/33236#33236
or here http://forums.adobe.com/message/2654715#2654715
I hope this helps.
Ben

Server issue with iCal/Google?

I have been having this issue for a while: I keep getting an error message as soon as I open iCal about not being able to connect to a server because of a password issue with my synced (from Google calendar) calendars.
Specifically, the pop up says: "The server did not recognize your user name or password for account ____", and then iCal immediately crashes. This has been happening for months now, making iCal completely unuseable to me, but I need a calendar on my Mac!
Help! Please?

Have you granted the IIS user read & execute access to the %ORACLE_HOME% directory and subdirectories?
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

I'm having a trouble with a google maps

Inside a movieclip I've placed a Google Map, I've set a marker and a listener to it.
When the mouse hovers the marker appears the ballon with some informations (using openInfoWindow).
Well, I've tested it on my local machine and it works correctly, now I've put the movie online and the ballon doesn't pop up, into the browser's status bar I read "Data transfer from www.mysite.it" and nothing happes.
I have an old version of that movieclip online (on the same domain) and the baloon appears.
The code for both the maps is the same (I've copied and pasted it).
I can't get why on my pc it works and online doesn't.
Any idea?

Try this on the iPhone 5s go into settings turn iMessage off wait about 60 secs then turn it back on...under iMessage you will see it say waiting for activation...when it changes it will give a message that says iMessage can be sent blah blah blah...after you see that you will see an option that says send and receive ...click that...it should bring you yo a page that say you can be reached by iMessage at you should see you phone number with a check mark..it will be light grey...don't worry about signing into you Apple ID... You only need to do that if you are connecting you iPhone to another device (Mac, iPad, iPod touch) to receive the same iMessages on both...after that go back to the first message settings page again and at the bottom you will see mms messaging turn that off then back on....after that's done..tap you home key and send a test message
If it still doesn't work follow this http://support.apple.com/kb/ts2755

Im having problems with loading Google Maps, it takes a while to load up. This has only started doing this recently.I changed to Mozilla from IE Exporer as that was useless.

Mozilla runs fine with other web sites but when I use Google Maps it struggles to load up maps. Looks like there is a constant exchange between Google and Mozilla which is slowing up the loading. This has only been happening about 3 weeks ago, it was perfect before that so maybe it could be the Mozilla update that I accepted.

try replacing the sim card after that it needs to be replaced and since you had some one else open up the phone you would lose the out of warranty replacement price and have to buy a new one at the full retail value

Firefox having issues with embedded media websites

I actually have two issue which maybe the same issue.
1.
Certain sites that I regular navigate to that have some sort of embedded media, the media does not display. As an example on the site http://odb.org/, in the top left corner is a player which displays in Chrome and IE and displayed in Firefox prior to 4.0 but now only displays a white box but no play button or volume control. Other websites with different media types are blank. I have a site with code that displays an embedded interactive speaking character and the portion of the screen is should display remains blank.
2.
Second issue, maybe related is while the Firefox 4.0 appears to be fast. On the same sites with embedded media or with complex pages (probably has stuff I don't know is there), the page attempts to load and you see the waiting for or transferring message in the bottom left corner. It takes a while and then if you attempt to click anywhere on the page you get the "not responding" message but the page eventually loads possible with missing content. Heck I have this problem accessing the Firefox support page.

Nope. Went through that list before and nothing. For kicks, I try it all again. I turned off every add-on but Shockwave and that didn't work either. Also, on the Adobe Flash test page the Flash portion of the screen does not display when I use FireFox but does when I use Chrome, so I couldn't check the whole hardware acceleration setting anyway. I had reboot issues when I was forced to upgrade to Firefox. I am wondering whether my download is somehow corrupt. And if you were wondering, Safe mode didn't work either. When's the next Firefox patch. funny thing is everything worked well in Firefox 3.6 and below, so either the update to 4.0 or the download process broke something.

Issue with embedded google map

Similar Messages

Maybe you are looking for