Issue in Java Code for the dropdown
Hi,
I have created a HR form.
Here I have 2 text fields Firstname & Lastname
I have made those 2 TEXT fields as mandatory using the following code:
if (Page1.Subform1.VORNA.isNull) {
xfa.host.setFocus(Page1.Subform1.VORNA);
xfa.host.messageBox("First Name is a required field.","Required Field",1);
xfa.host.setFocus(Page1.Subform1.VORNA);
This code is working fine for the TEXT fields.
I have two another DROPDOWN FIELDS (TITEL & GENDER).
When I am applying the same code to these fields then it goes into an endless loop.
Kindly help.
Thanks & Regards,
Lina Khanna
800414 wrote:
Hi,
It's a very interesting subject -
It appears under "validity of enc.\ proofs" in the following:Thanks for the information. It looks to require more than a couple of hours for me to get a grip on the subject so I suspect I will not get round to it.
Best of luck with your research.
Sabre
Similar Messages
-
Provide the java code for the following scenario.
Hi Experts,
I have tried with all the combinations for this scenario. As per my understanding i require java code for the following scenario
so that it becomes easy........
I require a Message mapping for this Logic.
In the Source there are 4 fields and, the Target side, the fields should appear like this.
Source Structure- File
Record
|-> Header
Order_No
Date
|-> Item
Mat_No
Quantity
Target Structure-IDoc
IDoc
|-> Header
|-> Segment
Delivery_Order_No
Recv_Date
|-> Item
|-> Segment
Delivery_Order_No
Material_Num
Recv_Quantity.
The Logic is for every Order number an IDOC is generated.And if the Material num matches then the quantity should be added. and important note is that the material numbers are different for every order number. That means if a material number is 2 in the order number A. Then the material number can never be 2 in any of the order numbers.Here is the following with an example for the above scenario.
For example:-
we have
Source Structure- File
Order-no Date Mat_No Quantity
1 01/02/2011 A 10
1 01/02/2011 B 15
1 01/02/2011 A 10
2 01/02/2011 C 10
2 01/02/2011 C 10
3 01/02/2011 D 20
3 01/02/2011 D 10
3 01/02/2011 E 25
Target Structure-IDoc
Delivery_Order_No Recv_Date Material_Num Recv_Quantity
1 01/02/2011 A 20
1 01/02/2011 B 15
2 01/02/2011 C 20
3 01/02/2011 D 30
3 01/02/2011 E 25
So for this example total of 5-Idocs created. That means for this example if Order_No is 1 When the Mat_No is A the quantity gets added. For this Scenario 1 IDoc with four Fields 2 in Header(Delivery_Order_No, Recv_Date) and 2 in Item(Material_Num, Recv_Quantity) is generated by adding the quantity field in the Target Side. Similarly if Order_No is 1 when the Mat_No is B then separate IDoc is generated with four Fields 2 in Header(Delivery_Order_No, Recv_Date) and 2 in Item(Material_Num, Recv_Quantity) in the Target Side. Similarly, if Order_No is 2 when the Mat_No is C, an IDoc is generated with four Fields 2 in Header(Delivery_Order_No, Recv_Date) and 2 in Item(Material_Num, Recv_Quantity) by adding the quantity field in the Target Side. ike wise the process goes on upto 3.Kindly do the needy..
Kindly provide the java code.
Thanq very much in advance..what i have understood from ur example is that u want to generate an idoc for unique combination of Order-no and Mat_No
if yes then chk the below mapping..
change the context of Order_No, Date, Mat_No and Quantity to Record (right click-> context)
1)
Order-no
----------------------concat[;]---sort----splitbyvalue(valuechanged)-----collapse context---IDoc
Mat_No
2)
Order-no
--------concat[;]---sort----splitbyvalue(value changed)---collapse context---UDF1--splitbyvalue(each value)--Delivery_Order_No
Mat_No
3)
Order-no
-----------concat[;]---sortbykey----------------------- \
Mat_No / \
Date--------------- / \
----------------------------------------------------------FormatByExample-----collapsecontext---splitbyvalue(each value)----Recv_Date
Order-no /
-----------concat[;]---sort----splitbyvalue(value changed)
Mat_No
4)
Order-no
--------concat[;]---sort----splitbyvalue(value changed)---collapse context-UDF2--splitbyvalue(each value)--Material_Num
Mat_No
5)
Order-no
-----------concat[;]---sortbykey
Mat_No /
Quantity --------------- /
----------------------------------------------------------FormatByExample-----SUM(under statistic)----Recv_Quantity
Order-no
-----------concat[;]---sort----splitbyvalue(value changed)
Mat_No
UDF1:
String [] temp= a.split(";");
return temp[0];
UDF2:
String [] temp= a.split(";");
return temp[1]; -
Creating Java code for the function module
Hi Colleagues,
I have a fuction module in ABAP system. Now I want to Generate java code for the FM.
I cam to know that we can achive that using AXIS, By getting the XML file for the fuction module and generate Java
Class file using that XML file.
Can any one tell me how to achive it.
Or any other way to do that?
Please provide you valid suggestions.
Regards,
SathyaHi,
You can integrate axis2 in eclipse. I think you have to find the plugin for that.
After that you can let axis generate the jave code (stubs and proxies) for your web service via the wsdl file.
Kind Regards,
Robin -
How to make jar with from java code for the filenames containing spaces
I tried to make jar file using Runtime.exec method . The filenames have spaces in it .So i gave the filenames in double quotes.It works fine with windows and also from the command prompt.But when i run the same code in unix box , it creates a jar file with no content.Pls give some solution. I used the jdk1.2.2
Pls give some solution. Pls post your code
-
Java code for BAPI_SalesOrder_getlist_Input
Hi Experts,
I have done sales order using bapi in web dynpro. I have complete all my design part related to this like context mapping, model binding etc an all are working fine, now i have to write some java code in the Implementaion tab.,
I have taken fields for this BAPI
1-Output · Return
Output · SalesOrders
Customer_Number
Document_Date
Document_Date_To
Sales_Organization
I have wriiten something but, i am not sure as i do not have java background.
so please help me out this issue or send me some documets on this topic.
thanks & regards,
Iqbal AhmadHi,
This is the best thread to find all the flow and no need to write more code.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/202f1dfb-74db-2910-e48e-a7430c317df9.
U can add the followng code n the init method of any view or custom controller
wdContext.nodeControllernodename().bind(new FnModule());
// pass the nput.
try{
WdContext.CurrentControllerNodeElement().modelObject().execute();
wdContext.nodeOutput().invalidate();
close the brace and
catch(Excepton e)
e.prntStacTrace();
close the trace.
Thans
Lohi
Message was edited by:
Lohitha M -
ABAP Routine code for the below logic
Hello BW Experts ,
I need to write a complex ABAP routine in BW .
Following is the detail explaination .
Can anyone tell me the ABAP code for the below logic?
It would be a greate help as I am unable to do this
since last two days.
WBS Elements are maintained at IOS and Warranty levels in R/3 side.
The IOS WBS is a top level of WBS element and below that the Warranty WBS level.
The IOS and Warranty WBS elements can be differentiated by means of priority field.
When priority = i , WBS Element is known as IOS Level WBS Element and
When priority = Y the WBS element is known as Warranty WBS element.
The Equipment Number is maintained compulsorily at IOS Level WBS elements only.
It is not maintained at Warranty WBS Element.
But the Cost is maintained at Warranty WBS Elements.
In BW I need all Warranty WBS ( priority = Y) along with their cost figures and Equipment Numbers.
But as the Equipment Number is not maintained compulsorily at Warranty WBS level we have asked to
Copy it from IOS WBS ( priority = i ) and assign it to Warranty WBS level ( priority = Y ).
So I have included the Equipment Number in the ODS and in update rules I need to write the routine for it as
per the above logic.
The Equipment Number is coming from Master data of WBS Element.
The WBS element master data we are loading in BW .
Also the same WBS Element transaction data is coming from the transaction data data source in BW.
Following fields / infoobjects and the table names in BW :
1. Equipment Number : /BIC/ZEQUIPMNT and table name /BIC/MZWBS_ELEM.
2. WBS Element : ZWBS_ELEM is coming from transaction data data source as well as master data.
In ODS update rules it is coming from transaction data data source Comm_structure-ZWBS_ELEM.
Also we are loading separetly the master data for ZWBS_ELEM.
The ZEQUIPMNT is an attribute of ZWBS_ELEM.
3. Priority : PRIORITY and table name /BIC/MZWBS_ELEM.
The info object name for Priority is 0Priority but in master data table /BIC/MZWBS_ELEM
the field name is PRIORITY.
When PRIORITY = ' i ' then ZWBS_ELEM is at IOS Level
When PRIORITY = ' y ' then ZWBS_ELEM is at Warranty Level.
4. ODS name : /BIC/AZCOST00 and same is table name active data table .
So please tell me the routine Code .
Best Regards ,
Amol.Hi Dinaker,
Did you find any solution for this issue. I too have a similar requirement of pulling all the service orders for a specific Purchase Order in the BW report.
Thanks,
SAPBWI -
How to get the java code of the message mapping
how to get the java code of the message mapping,
I mean to ask how to get the background java code of the message mapping(graphical mapping).
And where to view it?Hi Satya,
The JAVA code for graphical msg mapping is in below folder:
\usr\sap\<SID>\<DVEBMGS10>\j2ee\cluster\server0\temp\classpath_resolver
Here all the mapping jars are there in this folder.
Just decompile these jars and you can see the code.
Thanks,
Rajeev Gupta
Message was edited by:
RAJEEV GUPTA -
I Need Java code for following Algorithm
* I Need Java code for following algorithm. Kindly any one help.
1. Read the contents (ideas and its corresponding scores) from two files named as 'a' and 'b'.
2. Stored the file 'a' contents in array a[].
3. Stored the file 'b' contents in array b[].
4. compare both files like
if(a.equals(b[j])
Writing the common idea and add the score from file 'a' and 'b'.
else
write the uncommon idea and its score..
For example :
Form Agents.txt
action,65
architecture,85
eco-,15
essay,30
form,85
form,85
link,40
tangent,25
Form Agents1.txt
Black holes,69
essay,78
Herewith i have above mentioned two files named as Form Agents and Form Agents1.
Form Agents has eight fields
Form Agents1 has two fields
--> 'essay' is common in two files, so store the idea 'essay' and add the score from Form Agents score is '30' and Form Agents1 has 78 (essay 108).
Finally it stores idea in another file with uncommon fields also.
Please help us.We have tried with following code.
But we cant add the scores.
For Example:
Form Agents.txt --> has "essay,30"
Form Agents1.txt --> has "essay,78"
Result is: essay,108
Finally it stores idea in another file with uncommon fields also.
So Any one pls correct the following code.
try
DataOutputStream o1=new DataOutputStream(new
FileOutputStream("C:\\Interfaces\\interfaces\\temp\\BlackBoard\\My Design
World\\Project\\Material\\art\\System Agents\\Form Agents\\CandidateResponses\\Form
Agents.txt"));
//Reading the contents of the files
BufferedReader br= new BufferedReader(new InputStreamReader(new
FileInputStream("C:\\Interfaces\\interfaces\\temp\\BlackBoard\\My Design
World\\Project\\Material\\art\\System Agents\\Form Agents\\Ideological\\Form
Agents.txt")));
BufferedReader br1= new BufferedReader(new InputStreamReader(new
FileInputStream("C:\\Interfaces\\interfaces\\temp\\BlackBoard\\My Design
World\\Project\\Material\\art\\System Agents\\Form Agents\\Related\\Form
Agents.txt")));
while((s=br.readLine())!=null)
s1+=s+"\n";
while((s2=br1.readLine())!=null)
s3+=s2+"\n";
int numTokens = 0;
StringTokenizer st = new StringTokenizer(s1);
String[] a = new String[10000];
String[] br_n=new String[10000];
int i=0;
while (st.hasMoreTokens())
s2 = st.nextToken();
a=s2.substring(0,s2.length()-3);
s6=s2.substring(s2.length()-2);
br_n[i]=s6;
i++;
numTokens++;
int numTokens1 = 0;
StringTokenizer st1 = new StringTokenizer (s3);
String[] b = new String[10000];
String[] br1_n=new String[1000];
int j=0;
while (st1.hasMoreTokens())
s4 = st1.nextToken();
b[j]=s4.substring(0,s4.length()-3);
s7=s4.substring(s4.length()-2);
br1_n[j]=s7;
j++;
numTokens1++;
int x=0;
for(int m=0;m<a.length;m++)
for(int n=0;n<b.length;n++)
if(a[m].equalsIgnoreCase(b[n])){
int sc=Integer.parseInt(br_n[m]);
int sc1=Integer.parseInt(br1_n[n]);
int score=sc+sc1;
o.writeBytes(a[m]+","+score+"\n");
break;
else
o.writeBytes(a[m]+","+br_n[m]+"\n");
break;
}catch(Exception e){} -
Need code for the following chess game..plz help me out
Hi,
Problem:Move the chess piece "KNIGHT" from any location on a "3 x 3" Chess Board and make it go to the far right hand bottom corner.Chess Board in the problem is not the usual Chess Board of 8 x 8.KNIGHT starting position may be any position on board.Program should exit when knight moves to 3 x 3 corner.Here is how my Chess board looks.
|.... |.... |.... |
|.... |.... |.... |
|.... |.... |Queen |<<--The Queen should reach this position
Remember: KNIGHT moves in specific way such as 2 steps in one direction and 1 step left/right.If the KNIGHT starts are position (2,2) then it cannot move further and you have to throw exception with some error message.
Run command: "java <some class> x y", where x is x-coordinate and y is y-coordinate(starting position of Knight) on the chess board. For this problem x & y could be 1(min) and 3(max) values and any value(2) in between.
Deliver : 1) Send me the java code for above problem.
2) Java code should compile and run.
3) I will be interested in "Object Oriented Design" thaught process.
4) Your coding style
5) Javadoc
6) Makefile
I would be more interested in your class design, interface design and error handling.
please mail the solution to [email protected]
thanks n regards
ChinuHi, Here Knight moves like horse. Queen doesn't
exist. If knight moves to (3,3). Game will be over.
I am facing problem to move knight from one point
to another point. And also i have some confussion on
selecting interfaces and classes.<font size="10000">do your own homework</font> -
Here the SSCCE code for the prvious problem posted by me.
Following is the SSCCE code for the program of search which is having the problem i have asked before.
here when you run it will show a form which have a search button on it and when you press it a panel will shown below which have a table( it is just a bounded area without any column or row as i have removed the database functionality and we dont have to do with it).
the problem is the same that firstly i want to make the panel invisible.
(the blue and yellow colors are just to seperate the panel and the container) Secondly i want to remove the extra large space added below the last table and thirdly i want that on each press of the search button the scrollbar will focus on the new table added.
import javax.swing.*;
import javax.swing.table.DefaultTableCellRenderer;
import javax.swing.border.*;
import java.awt.*;
import java.awt.event.*;
public class Temp extends JFrame implements ActionListener
Container c;
Toolkit tk;
JLabel l1; int y=30;
JPanel p1,p2,p3;
JRadioButton rbByName,rbBySirName,rbByID,rbByCity,rbByState;
JButton btSearch,btView;
ButtonGroup bgSearch;
JTextField txtSearch; BoxLayout boxl;
ImageIcon i1;JScrollPane sp1;JViewport vp;
public Temp()
super("Search-Address Management System");
c=getContentPane();
tk=Toolkit.getDefaultToolkit();
setSize(1024,768);
c.setBackground(Color.BLUE);c.setLayout(null);
setDefaultCloseOperation(JFrame.DISPOSE_ON_CLOSE);
defineComponents();
settingBounds();
addListeners();
addComponents();
setVisible(true);
public void defineComponents()
p1=new JPanel();
p1.setLayout(null);
p1.setOpaque(false);
p2=new JPanel();
p2.setLayout(null);
p2.setOpaque(false);
p3=new JPanel();
boxl=new BoxLayout(p3,BoxLayout.Y_AXIS);
p3.setLayout(boxl);
rbByName=new JRadioButton("First Name");
rbByName.setOpaque(false);
rbBySirName=new JRadioButton("Last Name");
rbBySirName.setOpaque(false);
rbByState=new JRadioButton("State");
rbByState.setOpaque(false);
rbByCity=new JRadioButton("City");
rbByCity.setOpaque(false);
rbByID=new JRadioButton("ID");
rbByID.setOpaque(false);
btSearch=new JButton("Search");
bgSearch=new ButtonGroup();
txtSearch=new JTextField();
btSearch=new JButton("Search");
TitledBorder tb=new TitledBorder("Search Criteria");
TitledBorder tb1=new TitledBorder("Search");
p1.setBorder(tb);
p2.setBorder(tb1);
public void settingBounds()
rbByID.setBounds(20,30,50,20);
rbByName.setBounds(120,30,100,20);
rbByState.setBounds(20,70,80,20);
rbByCity.setBounds(120,70,50,20);
rbBySirName.setBounds(240,30,100,20);
p1.setBounds(30,40,400,110);
p2.setBounds(30,180,400,80);
p3.setBackground(Color.ORANGE);
txtSearch.setBounds(50,210,250,25);
btSearch.setBounds(320,210,80,25);
rbByID.setSelected(true);
public void addListeners()
btSearch.addActionListener(this);
public void addComponents()
p1.add(rbByName);
p1.add(rbBySirName);
p1.add(rbByState);
p1.add(rbByCity);
p1.add(rbByID);
c.add(txtSearch);
c.add(btSearch);
c.add(p1);
c.add(p2);
bgSearch.add(rbByID);
bgSearch.add(rbByName);
bgSearch.add(rbBySirName);
bgSearch.add(rbByCity);
bgSearch.add(rbByState);
public void drawtable()
JTable t1=new JTable()
public Class getColumnClass(int column)
return getValueAt(0, column).getClass();
if(y==30) //as temporay variable only to add the scrollpane once
sp1=new JScrollPane(p3,JScrollPane.VERTICAL_SCROLLBAR_AS_NEEDED,JScrollPane.HORIZONTAL_SCROLLBAR_NEVER);
sp1.setBounds(30,300,660,380);
c.add(sp1);
JScrollPane sp=new JScrollPane(t1);
sp1.getViewport().setOpaque(false); // to make the scrollpane transparent but not worked
sp.setMaximumSize(new Dimension(600,100));
p3.add(Box.createRigidArea(new Dimension(600,20)));// invisible filler to add space between two tables
p3.add(sp);
p3.revalidate();
y=y+110;
public void actionPerformed(ActionEvent e)
if(e.getSource()==btSearch)
drawtable();
public static void main(String args[])
new Temp();
}Please reply with the code required to be added.the problem is the same that firstly i want to make the panel invisible.If I remember you other postings I think you mean to say transparent, which means the background of its parent component will be painted. If you make the panel invisible, then all the component added to the panel will also be invisible.
You have a structure something like this:
main panel
- scroll pane
- viewport
- table panel
- table1
- table 2As you where told in one of you many other posting on this topic, if you want the background of the main panel to show through then you need to make all the component on top of the pane non-opaque, not just the viewport. So, the scroll pane and table panel also need to be changed.
And don't forget to reply to all your other postings on this topic stating that those postings are "closed" so people don't waste time answering in those postings. Keep the conversation in one posting so everybody knows what has been suggested. -
Need ABAP code for the below Services requirement
Hi,
We have a requirement to show all the services for a particular Purchase order number.For this I built a view on 2 tables ESLL and EKPO.Now based on the below logic I need to bring the services for the Purchase order..
1.Enter PO number,item no. and Doc category in EKPO and find the Pack no.
2.Now take the Pack no. of EKPO and give in ESLL and find the Sub pack no.
3.Now take this Subpack no. and Give this sub pack as Pack no. in ESLL
4.This will be the Service entry record for that PO number.
Can any one Please suggest me to how to write the ABAP code for the above logic.
Thanks & Regards,
DinakarHi Dinaker,
Did you find any solution for this issue. I too have a similar requirement of pulling all the service orders for a specific Purchase Order in the BW report.
Thanks,
SAPBWI -
How to write processing code for the Inbound IDOC to the R/3 ??
i m having a file -> XI-->R/3 scenario,
IDOC is being sent from XI to R/3,
can u guide to me to write a processing code for the Inbound IDOC to the R/3,
since i m new to ABAP and ALE technology, can we provide me any blog for doing that.......or guide me....Hi Sudeep
Simple File to Idoc scenarion blog
/people/ravikumar.allampallam/blog/2005/06/24/convert-any-flat-file-to-any-idoc-java-mapping - Any flat file to any Idoc
Also see the blog
<a href="/people/ravikumar.allampallam/blog/2005/02/23/configuration-steps-required-for-posting-idocsxi Steps for Posting IDOC's</a> by Ravikumar.
Configuration of IDOC adapter
http://help.sap.com/saphelp_nw04/helpdata/en/96/791c42375d5033e10000000a155106/frameset.htm
Regards
Santhosh
*Reward points if useful* -
"error while evaluating Java script for the package"
Okay, this is a new one on me! Anyone ever get this message? I don't know what is going on with my iMac, all I know is that about a month ago my iTunes was working fine, and when I just went to use it, it tells me "you can not use the application iTunes with this version of Mac OS X. So I thought maybe something was wrong with my iTunes and downloaded it again and i got the "error while evaluating Java script for the package" when I tried to reinstall iTunes. Another issue I am having is with updates. I haven't received an update for a long time and when I manually check, it tells me there are none.
Okay, this is a new one on me! Anyone ever get this message? I don't know what is going on with my iMac, all I know is that about a month ago my iTunes was working fine, and when I just went to use it, it tells me "you can not use the application iTunes with this version of Mac OS X. So I thought maybe something was wrong with my iTunes and downloaded it again and i got the "error while evaluating Java script for the package" when I tried to reinstall iTunes. Another issue I am having is with updates. I haven't received an update for a long time and when I manually check, it tells me there are none.
-
How to view the java code of the message mapping,
Hi Experts,
<b>how to view the java code of the message mapping,</b>
how to get the background java code of the message mapping(graphical mapping).
And where to view it?Hi sowmya,
Open any Message mapping in IR. Press <b>CtrlShift0(zero)</b> to open a new menu.
There you will find an option "Is Java Source Code Available?"
There will be an export button nearby. Use it to get the code.
Open it in a zip , you will see the hide java code.
The JAVA code for graphical msg mapping is in below folder:
\usr\sap\<SID>\<DVEBMGS10>\j2ee\cluster\server0\temp\classpath_resolver
Here all the mapping jars are there in this folder.
Just decompile these jars and you can see the code. -
How to get the java code of the standard functions
How to get the java code of the standard functions in xi
Example , hoh get the java code for a node function - removeContext.hi
Click on the Standard Function.
Hold Ctrl+Shift
right click on the standard function to view the context menu. You will see options to view the source code by exporting
regards
krishna
Maybe you are looking for
-
itunes not recognising iphone 3GS. iphone is in a loop of searching..with image of connector to "itunes" on screen. Very frustrating - please help
-
I have a G770 I purchaed in 2011, and the AC adapter completely stopped working the other day. I was told by the "computer guys" at Fry's--and a comp tech friend of mine--that a 90W Universal Adapter will work. The tip that fits is a 19V/ 4.7 A, wh
-
Interactive Forms - Print orientation - ZPL
Hi, i am going to create my first label on a zebra printer with adobe forms (LiveCycle-Designer 8.2). When i print the label with a portrait-format everything is fine. In a special case the height of the label is about 2cm and the width is 10cm. So t
-
Database will not open after creating wallet
Hi all, 11.2.0.1 I am creating wallet to store database userid/password so that it will not be hard-coded in the batch scripts. The wallet folder location is set in sqlnet.ora: ========= SQLNET.AUTHENTICATION_SERVICES= (NTS) NAMES.DIRECTORY_PATH= (TN
-
When I open Acrobat it prompts to enter serial number was twice a week now is twice a day. Do not know how to get this to go away. Worked with Creative Cloud support they said it was a CS6 issue but CS6 does not have support. That I can find