Issue in Material Master data replication in SRM 7.13

Hi All,
We have implemented SRM 7.13 and facing an issue in material mater data delta replication.When we create a new material in ECC it does not get replicated to SRM and gives the ERROR 'Specify the relevant unit of length' and 'Validation error occurred: Module COM_PRODUCT_MAT_VALIDATE, BDoc type PRODUCT_MAT.' in SMW01.
But when changes are done to the same material in ECC it gets repicated without any issues.
Please provide your help to reolve this issue.
Thanks,
Ankur

Hi Ankur
Check your settings in CUNI transaction which UOM is this happening for or for all ?
You should go to that and check what are the conversion values maintained As seen below
In CUNI transaction go to utlilties > Adjustment select your R/3 system and click on Check mark
Also replicate the UOM from backend . By going to R3AS and fill DNL_CUST_BASIS3 and execute
Lastly go to Table T006 and T006A and click on Check table ...
Doing this would sync your UOM with that of ECC and ideally the error should vanish if not
share the screenshots
You can solve the errors mentioned above by implementing the following notes:
Call transaction SE16, enter SMOFAPPL, and set entry EBP.
Check the notes as below
520227 - Set type CRMM_PR_TAX (implement manually!)
720819 - Consumer entries
428989 - Filtering irrelevant data (for example, Sales and Distribution) Example: see attachment mod.txt.
675101 - Execute report: COM_CATEGORY_TRANSPORT
Note 872533 - FAQ: Middleware
Note 402591 - Download Customizing object DNL_CUST_BASIS3
Note 1609476 - Error loading tables DNL_CUST_PRICE and DNL_CUST_BASIS3 from ERP.
Note 393939 - Table TCURX is not downloaded from R/3 System
Note 1038966 - Entries missing in TCURX after load of DNL_CUST_BASIS3
Also refer to these who faced similar issue as yours
http://scn.sap.com/thread/1769891
http://scn.sap.com/thread/1355188

Similar Messages

How to avoid material master data migration of inactive materials to SRM

We are replicating material master from R3 4.6b to SRM 5.0 system. Under COMMPR01 , we can see the product status as deleted or locked .
How we can avoid the master data replication of materials which are already flagged as inactive (deletion) in R3.
Pls suggest.
Regards,
Avinash

Hi
Please try this ->
1) It is possible to use product_id without needing to replicate material masters from R/3 to SRM. For this to work you have to set the flag "Do not check product" in customizing
(see SRM Server > Master Data > Define External Web Services).
We do it like that and it works perfect for us. Only annoyance is, that we have to put leading zeroes in the product_id field.
"Do not check product" is used to avoid product check in SRM (to avoid replicating products into SRM), so they are not checked against SRM product master.
But this is not related to R/3 check.
In a classic or extended classic scenario, SRM will check that this material exists in the backend, especially for the current plant (location), before creating follow on doc.
As you created your catalog item without zeros, I guess SRM is sending this material to R/3 that does not recognize it.
Then you have this error message. Adapt your product IDs to be aligned with R/3 material master.
2) Try to run the report BBP_PRODUCT_SETTINGS_MW, there you select user as SRM instead of CRM and select service product active
3) Did you already checked OSS note 722600 and 366135 ? Also, Check the SAP OSS Notes - 786345, OSS Note 456753. It talks abt the internal and external representation of product ID in catalog and R3 system.
Related useful pointers ->
Product xx does not exist in plant xx or it has been flagged for deletion
Stock reservation movement (field XWAOK) is not flagged in ECC ??
Product XXX does not exist in plant YYY or it has been flagged for delete.
material deletion flag
Product XXX does not exist in plant YYY or it has been flagged for deletion
Hope this will help. Do let me know.
Regards
- Atul

Change of material master during transfer between SRM and R/3

Hi,
I have a question for modifying material master data between R/3 and SRM.
I would like to know if it is possible to change the material number during the transfer. The reason is:
I have 2 R/3 backends and 1 SRM system. The material codes in the 2 R/3 systems are different but some materials having different numbers in R/3 are referring to the same material. I want to see such materials with the same material number. Is it possible to do this with Middleware plus some interruption in between? The "translation" should be bi-directional.
Thanks

Hi,
No probs if the field is not replicated.No idea how to bring that through replication though.
Coming to the Product Search...Although the number of such materials is less...You will have to modify the Product search which will take care of the display of other products as well.
The Std product search(<b>bbph_product</b>) uses the the search help exit "<b>BBP_F4IF_SHLP_EXIT_PRODUCT_GEN</b>".So you need to replace this one with your custom FM.
In your custom FM,you will have to check for the HARMINIZED code field for all such materials and accordingly while selecting the Material select the HARMONIZED code as the Material number and in the Product search display that HARMONIZED code as the "PRODUCT ID". Also,you will have to develop RFC enabled FM which will actually fetch all the Materials from the BAckend at runtime. Also are you displaying the Product List Plantwise?
Pls give me ur mail ID where i can mail you the sample code.
BR,
Disha.
Pls reward points for helpful answers.

Can we recieve goods for purchase order with out material master data in PO

I have service PR for doing the services. I will give the material which is not accounted ( no material in the PO)and raise PO with reference to production order. but once the service is done,that product will become a material ( master data available) I have to receive the final product.Can we do the GR for this product. If so ,could you please explain the scenario

Hi Sankarkumar
When you are issuing the material for servicing your existing inventory for the material will be affected how you are plannignto handle that? You are receiving a different material once the serviceing is done then again yoour inventory will be affected for the new material. If you do not intend to issue material in SAP then why are you worried when you are bringing the new material into SAP after servicing is over? It is a subcontract scenario in a normal situation. But since you do not want then you can do a Service PO from the reqn and later use receipt without PO for bringing material in. Just speak to your finance guys how to set right the debit/credit amount resulted due to this transaction.
Regards
Sam

Sales order does not extract plant information from material master data

Hi experts,
I have created a sales order. However, the plant in the shipping tab can only be manually entered.
I have made the check:
the customer material master data does not have the plant info.
the customer master data does not have it either.
It is defined in the material master data: sales:general/plant
But the sales order did not extract this information. Why does this happen?
Thank you in advance.
Best regards,
Fan

Hello Friend,
As right stated by you,
The Plant will be copied from the master data to the sales order, if not it should be manually entered
The Sequence System will search for the Plant is as follow..
1. Customer material infor record, If it was not maintained then it will search in
2. Customer master, if the entre was not maintained in the SHIPPING TAB
3. Finally it will search in the Material master in the Sales organisation data 1 in the field DELVERING PLANT field.
So please search whether the entry was maintained in that field at the sales:sales organisation data 1.
This might be the issue.
Please revert if you want further details
regards,
santosh

Failure in the SOAP Runtime: Employee Master Data Replication Using IDoc OTM_EMPL

During employee master data replication from ECC to CfTE, we encountered the following error:
Unexpected element -el=OTM_EMPL ns=urn:sap-com:document:sap:idoc:soap:messages
We are using the 1402 WSDL for Replication of Employee Master Data with Employment Details (humancapitalmanagementmasterd2). The payload was not received in CfTE.
Can anybody please advise how to resolve this issue?
Thank you.

Dear Joselito,
This issue need deeper investigation in customer system.
Kindly report an incident for SAP Support for further help.
Regards,
Rahul Mishra

Requirement in conversion of material master data

i have a requirement in conversion of material master data, what do i need to do in this, do i need to use the LSMW or BDC for this scenario can any one help me in this issue.

Hi Rocky,
You can go for either of these two methods.Conversion in the sense you are going to create one upload program for MM01 and will upload the data using the program
But I suggest go for BDC.Because in LSMW you can not capture all the views for material master.
I am writing steps(BDC recording) for this.Just follow if helpful:
1.Go to SHDB t-code.
2.Press NEW RECORDING
3.enter recording name,Transaction code(MM01) and then press Start recording.
This will take you to the transaction MM01,please enter the test data given by your functional consultant.Also select the views that required by client.
4.After recording save it.
5.After saving press program button from the menu.
6.This will take you SE38 with the recording code.
7.Then you do as per normal BDC program,declare internal table and map with the uploaded fields.
Shout me for further clarification.
Reward if helpful.
Thank you.

Material master data maintenance strategy

Hi,
We are working on a global template to suggest Material master data maintenance strategy.
Please suggest what could be various options for same.
Regards,
Avnish

Hello,
In the same situation now:
1. Suggestion is to load the Basic Data centrally, say from HQ
2. Other data can be loaded via the subsidiary in the different countries.
3. If required you can use a block or a material statu and have the HQ control the access to the other parts of the material master.
For your information, we have come across a big issue regarding this and only now we have begun the above method as my client's HQ controls the release of materials into the market.
Regards
Waza

Material Master Data upload approach

Hi,
I have a requirement to upload material master data into D.B
1. Which is the best option to use - BDC/LSMW/BAPI(Program)/Direct upload program!
2. Based on Material types fields to be uploaded will change as per sample sheet,
Can we make use of single sheet With all fields in it(By removing common fields for all Mat.Types)!
Will BAPI - BAPI_MATERIAL_SAVEDATA useful for both MM01/MM02!
What is the better approach for the same!
Thanks,
Deep.

Hi,
I have 2 queations in addition to above.
1. If i write a program using above BAPI for material master data. Then will it be better approach than LSMW with BAPI?
In this case user will trigger Z tcode & he will select input file from desktop & execute & report log will be shown in the output with successful & unsuccessful materials.
2. I have to upload material master data. Now i have got sample files for Basic, Plant & Sales organization specific.
If i have single excel file (All fields in one single sheet/line) which covers all unique fields of material master related to diff Basic, Plant & Sales organization specific data & also for all diffrent material types will that be fine (or) it usually required seperate excel sheets for diffrent kinds of data!
Please clarify about above 2 issues!
Thanks in advance.
Thanks,
Deep.
Edited by: Deep on May 12, 2009 6:56 AM

Technical master data replication error

Dear Experts,
I am facing a problem with the TECHNICAL MASTER DATA replication from ISU TO CRM, Problem is I have completed the initial load of the TECHNICAL MASTER DATA load is sucessfull issue is when i am creating the NEW TECHNICAL MASTER DATA like connection object and premise they are not moving to CRM immediately every time i am doing the request load or initial load by putting the filters could you please tell me how to solve this issue.
Thanks & Regards
Boyz

Hi,
Sometimes, the data can get stuck in the queues. So you need to check on it as well.
After creating the technical master data, please check whether it exist in ISU system.
Then you can check the SMQ1(Outbound queue) in ISU.
Then you can check the SMQ2 (Inbound queue) in CRM.
Also in Tcode SMW01 ( BDoc message) in CRM.

Employee master data replication error

Dear experts,
Please help on the issue, as we are doing the UAT test next week.
When doing the employee master data replication on test tenant, everything works fine, the replication status is green. But when doing the employee replication on production tenant, replication status is red, and system gives error message:
Company of employment missing for remote employee XYZ.
We check the Employee in Replication Request, and go to the Employment tab, the Company ID is missing there on PRD tenant.
But we check the table OTM_HREE_C01 on ERP PRD and Test tenant , everything looks the same, also the Configuration in report OTM_TRIGGER_EMPL_REPL_CE, everything seems to be the same there.
Could you please let us know what went wrong, and what else to check?
Thanks!
Best regards,
Wendy

Here's some things that I would check:
- Make sure idoc includes the company code for the employee <E101OTM_S_EMPL_EMPLOYMENT> <COMPANY_CODE>
- The assigned cost center of the employee must belong to the same company code this employee is assigned to.
- Review the company code set-up to make sure it is complete
- The communication arrangement to make sure it is complete

Material master data complete in bi - infoset or multiprovider

Hi all.
for one of the reporting requirement of my client i need to extract the complete material master data in BI - from MARA, MARC, MARD, MSTLB tabls.
which i have done and stored in the infoobjects - 0MATERIAL, 0MAT_ST_LOC, 0MAT_PLANT, 0MAT_SALES.
now user want to see all the information against each material in 1 single line the multiple lines will only come in when there is plant.
which approach i shoul go for this scenario.
infoset or multiprovider.
i created infoset by using inner join but then i see only common materials, left outer join is giving me problems.like -
Invalid or missing ON condition for left outer join (0MAT_PLANT)
Invalid or missing ON condition for left outer join (0MAT_ST_LOC)
Invalid ON condition for left outer join (0MATERIAL)
kindly give your suggesstions on this.
thanks
dipika

Hello,
There are restrictions regarding left outer join in infoset:
If a left outer join is used, the following restriction applies to the right table (right operand):
·        Only join conditions with exactly one other table can be defined and
·        This table in turn cannot be a right table (right operand) of a left outer join.
Tables connected with left outer joins always form the end of a chain of tables. In this way, as many tables as you want can be linked in an InfoSet with a left outer join to a core of tables that are connected using inner joins.
The restrictions on the definition of left outer joins are due to the technical limitations of databases. These restrictions do not apply to inner joins.
http://help.sap.com/saphelp_nw2004s/helpdata/EN/67/7e4b3eaf72561ee10000000a114084/content.htm
http://help.sap.com/saphelp_banking60/helpdata/ru/a3/96663bd194a978e10000000a11402f/content.htm
BR
Ondrej

How to maintain material master data in plant....

Hi all,
while creating BOM I am getting an error "no material master data in plant' can some one help me how to maintain the material master data in plant
Regards,
Balu

Hi,
Please check the below link for MMR creaion .
http://web.mit.edu/sapr3/windocs/bpmdb01m.htm
Regards,

How to maintain the material master data in plant

Hi all,
while creating BOM I am getting an error "no material master data in plant' can some one help me how to maintain the material master data in plant
Regards,
Balu

Check the material available in MARC table in SE11 transaction against your plant.If it is not available please maintain through MM01 transaction.

Runtime error while creating material master data

hello sir,
i am facing one prolem while creating MATERIAL MASTER DATA.
AFTER GIVING ALL REQUIRED INFORMATION WHEN I AM GOING TO SAVE THE DOCUMENT ITS SHOWING ABAP RUNTIME ERROR.
MESSAGE TYPE: - MDS_KEYMAP.
MESSAGE CLASS: 001.
PLEASE TELL ME WHAT TO DO?
REGARDS..

SIR THANK YOU FOR YOUR REPLY.
I ALREADY DONE THAT DUMP ANALYSIS.
SO PLEASE KINDLY GIVE ME IN DETAILS ABOUT THAT SOLUTION...

Issue in Material Master data replication in SRM 7.13

Similar Messages

Maybe you are looking for