Issue in spool printing

hi experts,
I have a program in which I am submitting another program via its selection screen to SAP-POOL and printing the output . something like this:
SUBMIT z_tstpicklist TO SAP-SPOOL
        SPOOL PARAMETERS params WITHOUT SPOOL
        DYNPRO USING SELECTION-SCREEN 1000
                          WITH p_werks = p_werks
                          WITH s_wadat IN s_wadat
                          WITH s_kunnr IN s_kunnr
                          WITH s_vbeln IN s_vbeln
                          WITH r_bar   = r_bar
                          WITH p_rpt   = p_rpt
                         WITH p_pal = p_pal
                         with p_seq = p_seq
                          AND RETURN.
Now the problem is.... the output is being printed, but along with it another page containing the selection parameters of the submitted program is also being printed.
I dont want the selection page to print. How can I suppress it?
Thank you all in advance.
goldie.

Hi Nick,
I am actually getting the spool parameters from the FM 'GET_PRINT_PARAMETERS'.
But I shall change the PRBIG parameter and try it.
Thanks for the tip.
goldie.

Similar Messages

Regarding Spool Print

Hi All ,
i have a issue on spool print ie i have one spool number XXXXX it shows total number of pages as 1 page in Spool Output controller but once we click the smartforms link in spool output it contain 5 pages internally. so user want to print 3 page only. so i this case the print is not coming for 3rd page because of it shows only one page in spool out put. so can you please explain me how can i achieve this one .
Below is the spool output format
    Spool no.       Type Clt User    Date         Time Status Pages Title
    777106          360 XXXXX     18.03.2014 11:27 Compl.    1       SMART LOTH
Thanks,
Venkata Pradeep.

Hi,
With SEND IMMEDIATELY, it is not printing? why the list comes? No list appear in this case because you will not goes to ME9F.
First make sure that from ME22N it prints the print.
then think of Me9F.
It has to print the PO staright away from ME22N with SEND IMMEDIATELY on SAVING THE TRANSACTION, if the right printer is assigned.
Take the help of Basis person to know the printer settings.
Try with other printer.
regards,
Anji

Performance issues -- related to printing

Hi All,
I am haviing production system performance issues related to printing. endusers are telling the printing is slow for almost printers. We are having more that 40 to 50 printers in landscape.
As per my primary investigation I didnt find any issues in TSP01 & TSP02 tables. But I can see the table TST01 and TST03 table having many number of entries (more that lakh). I dont have idead about this table. Is ther eany thing related to this table where the print causes slowness or any other factors also makes this printing issue .. Please advice ..
thanks in advance

Hai,
Check the below link...
http://help.sap.com/saphelp_nw70/helpdata/en/c1/1cca3bdcd73743e10000000a114084/content.htm
http://help.sap.com/saphelp_nw70/helpdata/en/fc/04ca3bb6f8c21de10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/86/1ccb3b560f194ce10000000a114084/content.htm
TemSe cannot administer objects that require more than two gigabytes of storage space, regardless of whether the objects are stored in the database or in the file system. Spool requests of a size greater than two gigabytes must therefore be split into several smaller requests.
It is enough if you perform the regular background jobs and Temse consistency checks for the tables.
This will help in controlling the capacity problems.
If you change the profile parameter rspo/store_location parameter value to 'G' this will make the performance better. The disadvantages are TemSe data must be backed up and restored separately from the database using operating system tools, In the event of problems, it can be difficult to restore consistency between the data held in files and the TemSeu2019s object management in the database. Also you have take care of the Hard disk requirements because in some cases, spool data may occupy several hundred megabytes of disk storage. If you use the G option, you must ensure that enough free disk space is available for spool data.
Regards,
Yoganand.V

Purchase order print priview and spool print output are different.

Hi Friends,
there is problem with purchase order print priview and spool print output are different.
mean : in me23n .. for a perticular po .. in po priview the TAX VALUES value is 120 coming..
when i am giving print with spool.. the amount value is showing TAX VALUE
is 443..why it is showing wrong..
this is for perticular output type.
why TAX VALUES are showing different in print view and
spool print.
help me.
regards,

Hi Neil,
thanks for your reply.
but the valiadtions are happening in standard functional module PRICING.
it is realted script(medruck)...but there is no code point for spool or printer side..
and the issue is realted one PO OUTPUT TYPE..
it is sap standard debugging... when i am debugging the functional module PRICING.
the values are coming dynammically.
help me.
regards,

Printing Issue (Skipping of print pages)

Hello Experts,
We have a situation , where a program is run via Tx COWBPACK and HU's are generated and simultaneously "labels" are printed .
Approx 11,000 Labels are printed in 3 plants so approx 4000/plant.
Now this printing takes place at regular interval .. and can be like 25 labels , then 100 labels , then 50 labels and so on.
The problem is , when the printing starts say for printing of 50 labels , then 30 labels are printed properly and then the printing activity halts for about 1 min or so automatically , and when it resumes it starts printing from 32nd and goes on to complete till 50.
When we checked the spool error we saw the following error message displayed
Output device : PPD_frontend printer
Status : Incorrect
Logs show:
Connection closed after (protocol) error (RC=1)
Please note that , the PPD_frontend printer has been properly configued with "sequential printing".
The server has 3 SPO wp's.
This error never used to occur earlier , and it has been observed recently for over 2/3 weeks now.
Will you please provide me some insight to pinpoint out what the error is ??
Thanks in advance.
Regards,
Victor

Hello ,
This behavior is common throughout.. It happens for 20 labels.. for 400 labels for any number of labels...
Unfortunately we are not able to pin point the issue.
The printer setting also seems to be fine.
Could you please provide me some more insight on the SPOOL error that i have mentioned ??
Thank You.
Regards,
Victor

I downloaded CS6 and am having issues with my print driver. It is not compatible with the HP 2600n and have tried to download drivers given to me by adobe ( (Jupiter 3) but it is not working. after a few days. Its a temporary fix and is still looking for

I downloaded CS6 and am having issues with my print driver. It is not compatible with the HP 2600n and have tried to download drivers given to me by adobe ( (Jupiter 3) but it is not working. after a few days. Its a temporary fix and is still looking for the HP driver when i boot up. It also will not save in any print or postscript format. Does anyone know how to fix?
Currently use a Mac with the latest Mavericks 10.9.4

Oh boy! Acting kind of weird seems to be an understatement, aquaequus!
What type of troubleshooting were we able to do with you? I want to make sure that we can get some sort of resolution for this problem.
It is quite possible the battery door may get your phone in working order again. I'm not sure if the store has it in stock, but it is available in our warehouse for $14.99 which can be ordered via customer service.
Tamara H.
Follow us on Twitter @VZWSupport

Open port issues with Direct Print functionality

Hi, I have been fighting with HP call support about the Photosmart 7525 printer.
Originally I setup and had performed all the functions to enable both web support and WIFI.
Within an hour the printer would not respond to wireless communication, though it had its wireless indecator showing it was connected.
I was told by HP support that the issue will be resolved in March, as there will be a firmware update to fix the issue.
Now that I had the printer install the new firmware I still get the issue.
Though I found through some sniffing, that there are a number of ports enabled and open that are over and beyond print requirements.
Funny thing I can send my printer into instant lockup with all lights flashing with a simple UDP ping sniff. I would think I can do this with other new HP printers using Eprint functions. I will find HP web based printers that are open for public printing and test my theory that HP Eprinters are open to hacking and denyal of service attempts. My Hp print app on andriod list three in my area, and one is at my local Walmart. This would be cool to find this, as I am usually not the first to point such matters out.
I assume some are for Apple devices to print.
Here is my sniffing report:
Starting Nmap 6.40 ( http://nmap.org ) at 2014-03-21 07:57 Central Daylight TimeNSE: Loaded 110 scripts for scanning.NSE: Script Pre-scanning.Initiating ARP Ping Scan at 07:57Scanning 192.168.223.1 [1 port]Completed ARP Ping Scan at 07:57, 0.23s elapsed (1 total hosts)Initiating Parallel DNS resolution of 1 host. at 07:57Completed Parallel DNS resolution of 1 host. at 07:58, 16.50s elapsedInitiating SYN Stealth Scan at 07:58Scanning 192.168.223.1 [1000 ports]Discovered open port 445/tcp on 192.168.223.1Discovered open port 139/tcp on 192.168.223.1Discovered open port 80/tcp on 192.168.223.1Discovered open port 443/tcp on 192.168.223.1Discovered open port 8080/tcp on 192.168.223.1Discovered open port 9220/tcp on 192.168.223.1Discovered open port 6839/tcp on 192.168.223.1Discovered open port 631/tcp on 192.168.223.1Discovered open port 7435/tcp on 192.168.223.1Discovered open port 8089/tcp on 192.168.223.1Discovered open port 9100/tcp on 192.168.223.1Completed SYN Stealth Scan at 07:58, 1.71s elapsed (1000 total ports)Initiating UDP Scan at 07:58Scanning 192.168.223.1 [1000 ports]Discovered open port 5353/udp on 192.168.223.1Completed UDP Scan at 07:58, 1.82s elapsed (1000 total ports)Initiating Service scan at 07:58Scanning 20 services on 192.168.223.1Discovered open port 161/udp on 192.168.223.1Discovered open|filtered port 161/udp on 192.168.223.1 is actually open
Starting Nmap 6.40 ( http://nmap.org ) at 2014-03-21 07:51 Central Daylight TimeNmap scan report for 192.168.223.1Host is up (0.0025s latency).Not shown: 93 closed portsPORT     STATE SERVICE     VERSION80/tcp   open http        HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)139/tcp open tcpwrapped443/tcp open ssl/http    HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)445/tcp open netbios-ssn631/tcp open http        HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)8080/tcp open http        HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)9100/tcp open jetdirect?MAC Address: A03:C1:BD:C8:34 (Unknown)Device type: printer|general purposeRunning: HP embedded, Wind River VxWorksOS CPE: cpe:/h:hp:laserjet_cm1415fnw cpe:/h:hp:laserjet_cp1525nw cpe:/h:hp:laserjet_1536dnf cpe:/o:windriver:vxworksOS details: HP LaserJet CM1415fnw, CP1525nw, or 1536dnf printer, VxWorksNetwork Distance: 1 hopService Info: Device: printer; CPE: cpe:/h:hphotosmart_7520OS and Service detection performed. Please report any incorrect results at http://nmap.org/submit/ .Nmap done: 1 IP address (1 host up) scanned in 34.11 seconds

OK now I am able to run a full scan on TCP ports without causing a lock up of the printer.
I found that having the printer connect to a router that has been setup to use channel 5, 6 or 7 will cause port scanning issues with the printer.
It is obvious that there are 18 ports that are seen as open, whether they are used or not. Two of which are active but have no service connected to them. Some are just dead like port 25, but over half are active enough to recieve data and lock network connectivity within the printer.
As the firmware states some other laser jets may be affected depending on how the configuration can be set.
I moved my routers channel to channel 1 as it is the only other option I have in a highly congested location. It is not as good as channel 6, but the printer seems to have channel 6 locked in for direct printing.
Here is the latest full scan with UDP enabled, it is the furthest and most complete scan I am able to complete, with UDP ports enabled. The TCP port scan has a bit more and I have placed a simple list below the information given here:
Starting Nmap 6.40 ( http://nmap.org ) at 2014-03-21 13:27 Central Daylight Time
NSE: Loaded 110 scripts for scanning.
NSE: Script Pre-scanning.
Initiating ARP Ping Scan at 13:27
Scanning 192.168.1.211 [1 port]
Completed ARP Ping Scan at 13:27, 0.44s elapsed (1 total hosts)
Initiating Parallel DNS resolution of 1 host. at 13:27
Completed Parallel DNS resolution of 1 host. at 13:27, 0.03s elapsed
Initiating SYN Stealth Scan at 13:27
Scanning 192.168.1.211 [1000 ports]
Discovered open port 443/tcp on 192.168.1.211
Discovered open port 80/tcp on 192.168.1.211
Discovered open port 139/tcp on 192.168.1.211
Discovered open port 8080/tcp on 192.168.1.211
Discovered open port 445/tcp on 192.168.1.211
Discovered open port 631/tcp on 192.168.1.211
Discovered open port 9100/tcp on 192.168.1.211
Discovered open port 7435/tcp on 192.168.1.211
Discovered open port 9220/tcp on 192.168.1.211
Discovered open port 6839/tcp on 192.168.1.211
Completed SYN Stealth Scan at 13:27, 5.25s elapsed (1000 total ports)
Initiating UDP Scan at 13:27
Scanning 192.168.1.211 [1000 ports]
Discovered open port 137/udp on 192.168.1.211
Completed UDP Scan at 13:27, 4.46s elapsed (1000 total ports)
Initiating Service scan at 13:27
Scanning 16 services on 192.168.1.211
Discovered open port 161/udp on 192.168.1.211
Discovered open|filtered port 161/udp on 192.168.1.211 is actually open
Completed Service scan at 13:29, 82.51s elapsed (17 services on 1 host)
Initiating OS detection (try #1) against 192.168.1.211
NSE: Script scanning 192.168.1.211.
Initiating NSE at 13:29
Completed NSE at 13:30, 82.29s elapsed
Nmap scan report for 192.168.1.211
Host is up (0.023s latency).
Not shown: 1983 closed ports
PORT     STATE         SERVICE      VERSION
80/tcp   open          http         HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)
|_http-favicon: Unknown favicon MD5: 76C6E492CB8CC73A2A50D62176F205C9
| http-methods: GET POST PUT DELETE
| Potentially risky methods: PUT DELETE
|_See http://nmap.org/nsedoc/scripts/http-methods.html
|_http-title: Site doesn't have a title (text/html).
139/tcp open          tcpwrapped
443/tcp open          ssl/http     HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)
|_http-favicon: Unknown favicon MD5: 76C6E492CB8CC73A2A50D62176F205C9
| http-methods: GET POST PUT DELETE
| Potentially risky methods: PUT DELETE
|_See http://nmap.org/nsedoc/scripts/http-methods.html
|_http-title: Site doesn't have a title (text/html).
| ssl-cert: Subject: commonName=HPPS7525/organizationName=HP/stateOrProvinceName=Washington/countryName=US
| Issuer: commonName=HPPS7525/organizationName=HP/stateOrProvinceName=Washington/countryName=US
| Public Key type: rsa
| Public Key bits: 1024
| Not valid before: 2014-02-25T10:12:24+00:00
| Not valid after: 2034-02-20T10:12:24+00:00
| MD5:   9144 ca3b 557e 09cc aba0 8387 2732 2375
|_SHA-1: a6b2 95c0 b72a 7201 578c 32de 662a e6fe b082 48ca
|_ssl-date: 2014-03-21T13:30:09+00:00; -4h59m12s from local time.
445/tcp open          netbios-ssn
631/tcp open          http         HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)
| http-methods: GET POST PUT DELETE
| Potentially risky methods: PUT DELETE
|_See http://nmap.org/nsedoc/scripts/http-methods.html
6839/tcp open          tcpwrapped
7435/tcp open          tcpwrapped
8080/tcp open          http         HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)
|_http-favicon: Unknown favicon MD5: 76C6E492CB8CC73A2A50D62176F205C9
| http-methods: GET POST PUT DELETE
| Potentially risky methods: PUT DELETE
|_See http://nmap.org/nsedoc/scripts/http-methods.html
|_http-title: Site doesn't have a title (text/html).
9100/tcp open          jetdirect?
9220/tcp open          hp-gsg       HP Generic Scan Gateway 1.0
137/udp open          netbios-ns   Samba nmbd (workgroup: HPPS7525)
138/udp open|filtered netbios-dgm
161/udp open          snmp         SNMPv1 server (public)
| snmp-hh3c-logins:
|_ baseoid: 1.3.6.1.4.1.25506.2.12.1.1.1
| snmp-interfaces:
|   Wifi0
|     IP address: 192.168.1.211 Netmask: 255.255.255.0
|     MAC address: a0:d3:c1:bd:c8:32 (Unknown)
|     Type: ethernetCsmacd Speed: 10 Mbps
|     Status: up
|_    Traffic stats: 6.16 Mb sent, 3.43 Mb received
| snmp-netstat:
|   TCP 0.0.0.0:7435         0.0.0.0:0
|   TCP 192.168.1.211:56076 15.201.145.52:5222
|   UDP 0.0.0.0:3702         *:*
|   UDP 127.0.0.1:666        *:*
|_ UDP 192.168.223.1:67     *:*
| snmp-sysdescr: HP ETHERNET MULTI-ENVIRONMENT
|_ System uptime: 0 days, 3:34:23.28 (1286328 timeticks)
| snmp-win32-shares:
|_ baseoid: 1.3.6.1.4.1.77.1.2.27
1022/udp open|filtered exp2
1023/udp open|filtered unknown
3702/udp open|filtered ws-discovery
5355/udp open|filtered llmnr
MAC Address: A03:C1:BD:C8:32 (Unknown)
Device type: general purpose
Running: Wind River VxWorks
OS CPE: cpe:/o:windriver:vxworks
OS details: VxWorks
Uptime guess: 0.150 days (since Fri Mar 21 09:55:04 2014)
Network Distance: 1 hop
TCP Sequence Prediction: Difficulty=255 (Good luck!)
IP ID Sequence Generation: Busy server or unknown class
Service Info: Hosts: HPA0D3C1BDC832, HPPS7525; Device: printer; CPE: cpe:/h:hphotosmart_7520
Host script results:
| nbstat:
|   NetBIOS name: HPA0D3C1BDC832, NetBIOS user: <unknown>, NetBIOS MAC: <unknown>
|   Names
|     HPA0D3C1BDC832<00>   Flags: <unique><active><permanent>
|     MSHOME<00>           Flags: <group><active><permanent>
|     HPA0D3C1BDC832<20>   Flags: <unique><active><permanent>
|     HPPS7525<00>         Flags: <unique><active><permanent>
|_    HPPS7525<20>         Flags: <unique><active><permanent>
| smb-security-mode:
|   Account that was used for smb scripts: guest
|   User-level authentication
|   SMB Security: Challenge/response passwords supported
|_ Message signing disabled (dangerous, but default)
TRACEROUTE
HOP RTT      ADDRESS
1   23.26 ms 192.168.1.211
NSE: Script Post-scanning.
Read data files from: F:\Progs\Nmap
OS and Service detection performed. Please report any incorrect results at http://nmap.org/submit/ .
Nmap done: 1 IP address (1 host up) scanned in 180.90 seconds
           Raw packets sent: 2030 (74.829KB) | Rcvd: 2921 (149.377KB)
+++++++++++++++++++++++++++++++++++++++++++++++++++++===
Full TCP port scan without UDP scanning of all ports, showing up as open... * designates open and active.
192.168.223.1Discovered open port 25/tcp on
*192.168.223.1Discovered open port 80/tcp on
*192.168.223.1Discovered open port 110/tcp on
*192.168.223.1Discovered open port 119/tcp on
*192.168.223.1Discovered open port 139/tcp on
192.168.223.1Discovered open port 143/tcp on
*192.168.223.1Discovered open port 443/tcp on
*192.168.223.1Discovered open port 445/tcp on
192.168.223.1Discovered open port 465/tcp on
192.168.223.1Discovered open port 563/tcp on
192.168.223.1Discovered open port 587/tcp on
*192.168.223.1Discovered open port 631/tcp on
192.168.223.1Discovered open port 993/tcp on
192.168.223.1Discovered open port 995/tcp on
*192.168.223.1Discovered open port 7435/tcp on
*192.168.223.1Discovered open port 6839/tcp on
*192.168.223.1Discovered open port 8080/tcp on
192.168.223.1Discovered open port 8089/tcp on
*192.168.223.1Discovered open port 9100/tcp on
*192.168.223.1Discovered open port 9220/tcp on

Issues with Form printing using a 3rd party software!!!!!!!!!!!!!!!11

Hi All,
We are printing our month end AR statements using Xerox DP100 printers. We are using a SAP Script as the layout form. Everything works perfectly alright when a direct print is issued to the printer. But the scenario here is the statements are sent to a 3rd party software so that the statements can be saved in their repository and made available to be viewed and printed whenever necessary. Now the issue is when this 3rd Party Software(TPS) reads the SAP generated PCL from its report store on the unix host and generates a PDF File that it presents to the web client user for (re)printing via his/her PC it appears that the TPS or Websphere or Adobe is performing a font substituion - replacing the Univers font(used in R/3) which is not loaded on the unix host with a different font(with different sizing and/or behavior).
As a result the horizontal and vertical positioning generated by SAP(which is correct for the Univers font) is 'wrong' for the substituted font. The fixed size fields print OK but gradually move to the right. The varying size amount columns do not align correctly and fall off the right side of the page.
Can anyone give me pointers on what can be done to arrest this error.
Does the font need to be loaded on the unix host or the font used in the form be changed?
Regards,
Karthik

Karthik,
Sap script behaves differently for different printers. You will have to change margins when you change your printer/software accordingly.

Issue in Duplex Printing in Acrobat 9 Pro

Hi,
I have issues in duplex printing it comes out inverted. 1 side is correct and the other side is in the other direction.
Im using windows 7 and an HP 8500 wireless. Microsoft word is working fine so im assuming the printer driver is working ok.
Any ideas will really help.
Thanks
george mark

EMail + spool printing

Hi Experts..
I have a requirement where i am using exit & BTE for mail sending thru Dunning, f.27 & APP..
Though the mail is goin perfectly but I need to generate spools alongside mail generation too..
But prob is tht at a time C_FINAA-NACHA can have value I or 1 or 2.
'I' is for mailing & '1' is for printing.
BTE r 2040 & 1040.
Need to hv both the value for both mail n spool printing.
Kindly guide me pls..thanks in advance..

Hi,
If you want to mail the output, once you give the print, It is possible.
What u have to do is that get the Spool number from driver program using the function module OPEN_FORM & CLOSE_FORM.
Once you get the spool number, you can convert spool job to PDF and send that to exact address.
Check this procedure.
DATA :g_spool LIKE itcpp.
CALL FUNCTION 'CLOSE_FORM'
    IMPORTING
      RESULT = g_spool
    EXCEPTIONS
      OTHERS = 1.
g_spool-tdspoolid "spool request number
Call this function module to convert spool to Pdf
CONVERT_OTFSPOOLJOB_2_PDF
Sendind mail using the following function module.
SO_NEW_DOCUMENT_ATT_SEND_API1
I hope that it helps you.
Regards,
Venkat.O

Print priview and spool print output are different

Hi Friends,
there is problem with purchase order print priview and spool print output are different.
mean : in me23n .. for a perticular po .. in po priview one amount value is 120 coming..
when i am giving print with spool.. the amount value is showing
is 443..why it is showing wrong..
this is for perticular output type.
why perticular values are showing different in print view and
spool print.
regards,

make this setting change:
in SPAD > In the menu Settings -> Spool System
In the others tab check the first check box in the Output Controller block, SAVE and exit

Problem printing when spool print documents is selected as apposed to print direct

I have an officejet 6500 and I'm having a problem printing a label created using Label Factory Deluxe software. The job will not print if spool print documents so that printing finishes faster is selected under the printer properties. The job appears to be sent to the printer. The printer icon appears in the task tray for less than a second and the printer makes a trill sounding beep but nothing prints. In addition there is nothing in the print que. It will print however, if print directly to the printer is selected. Any ideas???

Hello,
Well with out any info on versions the easiest way is to check the Not Printer Option on in the Page Setup of the Report.
Don

Can we set the user wise priority in spool printing

Dear all,
Can we set the user wise priority in spool printing.
Can we hold bulk printing.
Regards
Tapovardhan

Hi Tapavardhan,
Here you can read everything about printing and spool options <a href="http://help.sap.com/saphelp_nw04/helpdata/en/d9/4a8eb751ea11d189570000e829fbbd/frameset.htm">Click Here</a>
Please dont forget to assign points if helpful
Regards
Juan

Spool printing undefined character symbols in sap script

Hi,
When I am trying to print a script, the spool print preview shows a times font and the size that I had defined in the form, but when the print is coming out it is coming with a courier font with the default font size of the printer and it is printing a smiley symbol on the start of every line. I have checked the fonts in all the windows of the form and everywhere it says times with a size of 12.
Please help me out
Regards,
Kiran

Hi,
Is that problem only at 1 printer or at all printers.
If it is onlty at 1 specific printer ask the basis guys .
Gr., Frank

Spool printing takes a long time for just one user

Hello,
Could someone please guide on what could be the reason that spool printing takes a long time for just one user ?
I've monitored all the spool processes through SM50, and I've found that a very long time elapses before the printing job appears in one of the four spool processes.
Thanks in advance.
Reda

Hi,
very long time elapses before the printing job appears in one of the four spool processes.
can u check the trace file(Red color error) of that spool process. Also can u see if there are any system logs in SM21 related to that spool request.
Also see how many pages the user is giving print @ 1 shot. Suppose if the printer to whcih the user is giving print is a network printer, see the network response time.
Have u tried to ask the same user to give print to some other printer. Also have u asked some other user to print to that problematic printer. Check the responses under this scenario also.
Regards,
Ravi

Issue in spool printing

Similar Messages

Maybe you are looking for