Open port issues with Direct Print functionality

Hi, I have been fighting with HP call support about the Photosmart 7525 printer.
Originally I setup and had performed all the functions to enable both web support and WIFI.
Within an hour the printer would not respond to wireless communication, though it had its wireless indecator showing it was connected.
I was told by HP support that the issue will be resolved in March, as there will be a firmware update to fix the issue.
Now that I had the printer install the new firmware I still get the issue.
Though I found through some sniffing, that there are a number of ports enabled and open that are over and beyond print requirements.
Funny thing I can send my printer into instant lockup with all lights flashing with a simple UDP ping sniff. I would think I can do this with other new HP printers using Eprint functions. I will find HP web based printers that are open for public printing and test my theory that HP Eprinters are open to hacking and denyal of service attempts.  My Hp print app on andriod list three in my area, and one is at my local Walmart. This would be cool to find this, as I am usually not the first to point such matters out.
I assume some are for Apple devices to print.
Here is my sniffing report:
Starting Nmap 6.40 ( http://nmap.org ) at 2014-03-21 07:57 Central Daylight TimeNSE: Loaded 110 scripts for scanning.NSE: Script Pre-scanning.Initiating ARP Ping Scan at 07:57Scanning 192.168.223.1 [1 port]Completed ARP Ping Scan at 07:57, 0.23s elapsed (1 total hosts)Initiating Parallel DNS resolution of 1 host. at 07:57Completed Parallel DNS resolution of 1 host. at 07:58, 16.50s elapsedInitiating SYN Stealth Scan at 07:58Scanning 192.168.223.1 [1000 ports]Discovered open port 445/tcp on 192.168.223.1Discovered open port 139/tcp on 192.168.223.1Discovered open port 80/tcp on 192.168.223.1Discovered open port 443/tcp on 192.168.223.1Discovered open port 8080/tcp on 192.168.223.1Discovered open port 9220/tcp on 192.168.223.1Discovered open port 6839/tcp on 192.168.223.1Discovered open port 631/tcp on 192.168.223.1Discovered open port 7435/tcp on 192.168.223.1Discovered open port 8089/tcp on 192.168.223.1Discovered open port 9100/tcp on 192.168.223.1Completed SYN Stealth Scan at 07:58, 1.71s elapsed (1000 total ports)Initiating UDP Scan at 07:58Scanning 192.168.223.1 [1000 ports]Discovered open port 5353/udp on 192.168.223.1Completed UDP Scan at 07:58, 1.82s elapsed (1000 total ports)Initiating Service scan at 07:58Scanning 20 services on 192.168.223.1Discovered open port 161/udp on 192.168.223.1Discovered open|filtered port 161/udp on 192.168.223.1 is actually open
Starting Nmap 6.40 ( http://nmap.org ) at 2014-03-21 07:51 Central Daylight TimeNmap scan report for 192.168.223.1Host is up (0.0025s latency).Not shown: 93 closed portsPORT     STATE SERVICE     VERSION80/tcp   open  http        HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)139/tcp  open  tcpwrapped443/tcp  open  ssl/http    HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)445/tcp  open  netbios-ssn631/tcp  open  http        HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)8080/tcp open  http        HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)9100/tcp open  jetdirect?MAC Address: A03:C1:BD:C8:34 (Unknown)Device type: printer|general purposeRunning: HP embedded, Wind River VxWorksOS CPE: cpe:/h:hp:laserjet_cm1415fnw cpe:/h:hp:laserjet_cp1525nw cpe:/h:hp:laserjet_1536dnf cpe:/o:windriver:vxworksOS details: HP LaserJet CM1415fnw, CP1525nw, or 1536dnf printer, VxWorksNetwork Distance: 1 hopService Info: Device: printer; CPE: cpe:/h:hphotosmart_7520OS and Service detection performed. Please report any incorrect results at http://nmap.org/submit/ .Nmap done: 1 IP address (1 host up) scanned in 34.11 seconds

OK now I am able to run a full scan on TCP ports without causing a lock up of the printer.
I found that having the printer connect to a router that has been setup to use channel 5, 6 or 7 will cause port scanning issues with the printer.
It is obvious that there are 18 ports that are seen as open, whether they are used or not. Two of which are active but have no service connected to them. Some are just dead like port 25, but over half are active enough to recieve data and lock network connectivity within the printer.
As the firmware states some other laser jets may be affected depending on how the configuration can be set.
I moved my routers channel to channel 1 as it is the only other option I have in a highly congested location. It is not as good as channel 6, but the printer seems to have channel 6 locked in for direct printing.
Here is the latest full scan with UDP enabled, it is the furthest and most complete scan I am able to complete, with UDP ports enabled. The TCP port scan has a bit more and I have placed a simple list below the information given here:
Starting Nmap 6.40 ( http://nmap.org ) at 2014-03-21 13:27 Central Daylight Time
NSE: Loaded 110 scripts for scanning.
NSE: Script Pre-scanning.
Initiating ARP Ping Scan at 13:27
Scanning 192.168.1.211 [1 port]
Completed ARP Ping Scan at 13:27, 0.44s elapsed (1 total hosts)
Initiating Parallel DNS resolution of 1 host. at 13:27
Completed Parallel DNS resolution of 1 host. at 13:27, 0.03s elapsed
Initiating SYN Stealth Scan at 13:27
Scanning 192.168.1.211 [1000 ports]
Discovered open port 443/tcp on 192.168.1.211
Discovered open port 80/tcp on 192.168.1.211
Discovered open port 139/tcp on 192.168.1.211
Discovered open port 8080/tcp on 192.168.1.211
Discovered open port 445/tcp on 192.168.1.211
Discovered open port 631/tcp on 192.168.1.211
Discovered open port 9100/tcp on 192.168.1.211
Discovered open port 7435/tcp on 192.168.1.211
Discovered open port 9220/tcp on 192.168.1.211
Discovered open port 6839/tcp on 192.168.1.211
Completed SYN Stealth Scan at 13:27, 5.25s elapsed (1000 total ports)
Initiating UDP Scan at 13:27
Scanning 192.168.1.211 [1000 ports]
Discovered open port 137/udp on 192.168.1.211
Completed UDP Scan at 13:27, 4.46s elapsed (1000 total ports)
Initiating Service scan at 13:27
Scanning 16 services on 192.168.1.211
Discovered open port 161/udp on 192.168.1.211
Discovered open|filtered port 161/udp on 192.168.1.211 is actually open
Completed Service scan at 13:29, 82.51s elapsed (17 services on 1 host)
Initiating OS detection (try #1) against 192.168.1.211
NSE: Script scanning 192.168.1.211.
Initiating NSE at 13:29
Completed NSE at 13:30, 82.29s elapsed
Nmap scan report for 192.168.1.211
Host is up (0.023s latency).
Not shown: 1983 closed ports
PORT     STATE         SERVICE      VERSION
80/tcp   open          http         HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)
|_http-favicon: Unknown favicon MD5: 76C6E492CB8CC73A2A50D62176F205C9
| http-methods: GET POST PUT DELETE
| Potentially risky methods: PUT DELETE
|_See http://nmap.org/nsedoc/scripts/http-methods.html
|_http-title: Site doesn't have a title (text/html).
139/tcp  open          tcpwrapped
443/tcp  open          ssl/http     HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)
|_http-favicon: Unknown favicon MD5: 76C6E492CB8CC73A2A50D62176F205C9
| http-methods: GET POST PUT DELETE
| Potentially risky methods: PUT DELETE
|_See http://nmap.org/nsedoc/scripts/http-methods.html
|_http-title: Site doesn't have a title (text/html).
| ssl-cert: Subject: commonName=HPPS7525/organizationName=HP/stateOrProvinceName=Washington/countryName=US
| Issuer: commonName=HPPS7525/organizationName=HP/stateOrProvinceName=Washington/countryName=US
| Public Key type: rsa
| Public Key bits: 1024
| Not valid before: 2014-02-25T10:12:24+00:00
| Not valid after:  2034-02-20T10:12:24+00:00
| MD5:   9144 ca3b 557e 09cc aba0 8387 2732 2375
|_SHA-1: a6b2 95c0 b72a 7201 578c 32de 662a e6fe b082 48ca
|_ssl-date: 2014-03-21T13:30:09+00:00; -4h59m12s from local time.
445/tcp  open          netbios-ssn
631/tcp  open          http         HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)
| http-methods: GET POST PUT DELETE
| Potentially risky methods: PUT DELETE
|_See http://nmap.org/nsedoc/scripts/http-methods.html
6839/tcp open          tcpwrapped
7435/tcp open          tcpwrapped
8080/tcp open          http         HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)
|_http-favicon: Unknown favicon MD5: 76C6E492CB8CC73A2A50D62176F205C9
| http-methods: GET POST PUT DELETE
| Potentially risky methods: PUT DELETE
|_See http://nmap.org/nsedoc/scripts/http-methods.html
|_http-title: Site doesn't have a title (text/html).
9100/tcp open          jetdirect?
9220/tcp open          hp-gsg       HP Generic Scan Gateway 1.0
137/udp  open          netbios-ns   Samba nmbd (workgroup: HPPS7525)
138/udp  open|filtered netbios-dgm
161/udp  open          snmp         SNMPv1 server (public)
| snmp-hh3c-logins:
|_  baseoid: 1.3.6.1.4.1.25506.2.12.1.1.1
| snmp-interfaces:
|   Wifi0
|     IP address: 192.168.1.211  Netmask: 255.255.255.0
|     MAC address: a0:d3:c1:bd:c8:32 (Unknown)
|     Type: ethernetCsmacd  Speed: 10 Mbps
|     Status: up
|_    Traffic stats: 6.16 Mb sent, 3.43 Mb received
| snmp-netstat:
|   TCP  0.0.0.0:7435         0.0.0.0:0
|   TCP  192.168.1.211:56076  15.201.145.52:5222
|   UDP  0.0.0.0:3702         *:*
|   UDP  127.0.0.1:666        *:*
|_  UDP  192.168.223.1:67     *:*
| snmp-sysdescr: HP ETHERNET MULTI-ENVIRONMENT
|_  System uptime: 0 days, 3:34:23.28 (1286328 timeticks)
| snmp-win32-shares:
|_  baseoid: 1.3.6.1.4.1.77.1.2.27
1022/udp open|filtered exp2
1023/udp open|filtered unknown
3702/udp open|filtered ws-discovery
5355/udp open|filtered llmnr
MAC Address: A03:C1:BD:C8:32 (Unknown)
Device type: general purpose
Running: Wind River VxWorks
OS CPE: cpe:/o:windriver:vxworks
OS details: VxWorks
Uptime guess: 0.150 days (since Fri Mar 21 09:55:04 2014)
Network Distance: 1 hop
TCP Sequence Prediction: Difficulty=255 (Good luck!)
IP ID Sequence Generation: Busy server or unknown class
Service Info: Hosts: HPA0D3C1BDC832, HPPS7525; Device: printer; CPE: cpe:/h:hphotosmart_7520
Host script results:
| nbstat:
|   NetBIOS name: HPA0D3C1BDC832, NetBIOS user: <unknown>, NetBIOS MAC: <unknown>
|   Names
|     HPA0D3C1BDC832<00>   Flags: <unique><active><permanent>
|     MSHOME<00>           Flags: <group><active><permanent>
|     HPA0D3C1BDC832<20>   Flags: <unique><active><permanent>
|     HPPS7525<00>         Flags: <unique><active><permanent>
|_    HPPS7525<20>         Flags: <unique><active><permanent>
| smb-security-mode:
|   Account that was used for smb scripts: guest
|   User-level authentication
|   SMB Security: Challenge/response passwords supported
|_  Message signing disabled (dangerous, but default)
TRACEROUTE
HOP RTT      ADDRESS
1   23.26 ms 192.168.1.211
NSE: Script Post-scanning.
Read data files from: F:\Progs\Nmap
OS and Service detection performed. Please report any incorrect results at http://nmap.org/submit/ .
Nmap done: 1 IP address (1 host up) scanned in 180.90 seconds
           Raw packets sent: 2030 (74.829KB) | Rcvd: 2921 (149.377KB)
+++++++++++++++++++++++++++++++++++++++++++++++++++++===
Full TCP port scan without UDP scanning of all ports, showing up as open... * designates open and active.
192.168.223.1Discovered open port 25/tcp on
*192.168.223.1Discovered open port 80/tcp on
*192.168.223.1Discovered open port 110/tcp on
*192.168.223.1Discovered open port 119/tcp on
*192.168.223.1Discovered open port 139/tcp on
192.168.223.1Discovered open port 143/tcp on
*192.168.223.1Discovered open port 443/tcp on
*192.168.223.1Discovered open port 445/tcp on
192.168.223.1Discovered open port 465/tcp on
192.168.223.1Discovered open port 563/tcp on
192.168.223.1Discovered open port 587/tcp on
*192.168.223.1Discovered open port 631/tcp on
192.168.223.1Discovered open port 993/tcp on
192.168.223.1Discovered open port 995/tcp on
*192.168.223.1Discovered open port 7435/tcp on
*192.168.223.1Discovered open port 6839/tcp on
*192.168.223.1Discovered open port 8080/tcp on
192.168.223.1Discovered open port 8089/tcp on
*192.168.223.1Discovered open port 9100/tcp on
*192.168.223.1Discovered open port 9220/tcp on

Similar Messages

  • I 've a problem with the print function of Itunes

    helo , i 've a problem with the print function of Itunes.
    When i'm trying to create a pdf file of my entire library, i've got a partial file of it.
    instead of the entire library (37000 songs - 209GByte) the pdf file contains only 18000 songs (1GB - pdf file).
    Is there any problem with the pdf creation in Itunes ?
    best regards
    Marco
    i mac 20"   Mac OS X (10.4.9)  

    Please read https://forums.adobe.com/thread/1499014
    -try some steps such as changing browsers and turning off your firewall
    -also flush your browser cache so you are starting with a fresh browser
    http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip/
    http://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html
    or
    A chat session where an agent may remotely look inside your computer may help
    Creative Cloud chat support (all Creative Cloud customer service issues)
    http://helpx.adobe.com/x-productkb/global/service-ccm.html

  • I downloaded CS6 and am having issues with my print driver. It is not compatible with the HP 2600n and have tried to download drivers given to me by adobe ( (Jupiter 3) but it is not working. after a few days. Its a temporary fix and is still looking for

    I downloaded CS6 and am having issues with my print driver. It is not compatible with the HP 2600n and have tried to download drivers given to me by adobe ( (Jupiter 3) but it is not working. after a few days. Its a temporary fix and is still looking for the HP driver when i boot up. It also will not save in any print or postscript format. Does anyone know how to fix?
    Currently use a Mac with the latest Mavericks 10.9.4

        Oh boy! Acting kind of weird seems to be an understatement, aquaequus!
    What type of troubleshooting were we able to do with you? I want to make sure that we can get some sort of resolution for this problem.
    It is quite possible the battery door may get your phone in working order again. I'm not sure if the store has it in stock, but it is available in our warehouse for $14.99 which can be ordered via customer service.
    Tamara H.
    Follow us on Twitter @VZWSupport

  • How to open labview program with Quit Labview function inside?

    Hi Any idea how to open labview program with  Quit Labview function inside?
    I forgot to add and set the condition of the type for this program.
    If the program is an application, it would close straight away.
    If it is still labview work, it will go straight to editing program without closing.
    So I need to recover, open it and make some changes.
    Clement
    Solved!
    Go to Solution.

    Put the VI in a project and open it from there, then it shouldn't autorun. You can use App.kind property of application to decide whether to close or not.
    /Y
    LabVIEW 8.2 - 2014
    "Only dead fish swim downstream" - "My life for Kudos!" - "Dumb people repeat old mistakes - smart ones create new ones."
    G# - Free award winning reference based OOP for LV

  • Issue with PDF Printer in Acrobat 6.0 on windons 8

    I use the PDF writer on acrobat.  I had an Windows XP PC which died and the new PC is windows 8 (no xp available).
    The s/w I have is Acrobat 6.0 standard it had issues w/ compatibility which I selected to load anyway.
    It gave 3 errors all the same Warning 20225  A Acrobat 6.0 setup unable to create Adobr PDF Port Monitor, the PDF Printer may be unavailablr.
    And it is.
    I down loaded and installed the to updates
    Ac60BaP1  and   Acro-Reader_6.0.2_Update
    Still has the issue.
    Can you help me?
    Is there a copy of 6.0 which would work I could download and use my license key on the disk I have.
    Customer service could not help only upgrades from 9.0 and did not know the issue
    I just need the PDF writer actually for my Resume print, currently looking for a job laid-off so money is tight.
    -Kevin

    You might be able to use Acrobat and Distiller, but the print driver and AcroTray will probably not work. For AA6 (assuming Acrobat and Distiller work), install a PS printer and set the port to FILE and change the name to Adobe PDF. Then when you print to the Adobe PDF printer (or use PDF Maker -- of course PDF Maker for AA6 will not work with OFFICE 2007 or later) you will create a PS file (probably have a PRN extension). Just open that file in Distiller to create a PDF. The 3rd party options are always there, but have pros and cons.

  • Performance issues with pipelined table functions

    I am testing pipelined table functions to be able to re-use the <font face="courier">base_query</font> function. Contrary to my understanding, the <font face="courier">with_pipeline</font> procedure runs 6 time slower than the legacy <font face="courier">no_pipeline</font> procedure. Am I missing something? The <font face="courier">processor</font> function is from [url http://www.oracle-developer.net/display.php?id=429]improving performance with pipelined table functions .
    Edit: The underlying query returns 500,000 rows in about 3 minutes. So there are are no performance issues with the query itself.
    Many thanks in advance.
    CREATE OR REPLACE PACKAGE pipeline_example
    IS
       TYPE resultset_typ IS REF CURSOR;
       TYPE row_typ IS RECORD (colC VARCHAR2(200), colD VARCHAR2(200), colE VARCHAR2(200));
       TYPE table_typ IS TABLE OF row_typ;
       FUNCTION base_query (argA IN VARCHAR2, argB IN VARCHAR2)
          RETURN resultset_typ;
       c_default_limit   CONSTANT PLS_INTEGER := 100;  
       FUNCTION processor (
          p_source_data   IN resultset_typ,
          p_limit_size    IN PLS_INTEGER DEFAULT c_default_limit)
          RETURN table_typ
          PIPELINED
          PARALLEL_ENABLE(PARTITION p_source_data BY ANY);
       PROCEDURE with_pipeline (argA          IN     VARCHAR2,
                                argB          IN     VARCHAR2,
                                o_resultset      OUT resultset_typ);
       PROCEDURE no_pipeline (argA          IN     VARCHAR2,
                              argB          IN     VARCHAR2,
                              o_resultset      OUT resultset_typ);
    END pipeline_example;
    CREATE OR REPLACE PACKAGE BODY pipeline_example
    IS
       FUNCTION base_query (argA IN VARCHAR2, argB IN VARCHAR2)
          RETURN resultset_typ
       IS
          o_resultset   resultset_typ;
       BEGIN
          OPEN o_resultset FOR
             SELECT colC, colD, colE
               FROM some_table
              WHERE colA = ArgA AND colB = argB;
          RETURN o_resultset;
       END base_query;
       FUNCTION processor (
          p_source_data   IN resultset_typ,
          p_limit_size    IN PLS_INTEGER DEFAULT c_default_limit)
          RETURN table_typ
          PIPELINED
          PARALLEL_ENABLE(PARTITION p_source_data BY ANY)
       IS
          aa_source_data   table_typ;-- := table_typ ();
       BEGIN
          LOOP
             FETCH p_source_data
             BULK COLLECT INTO aa_source_data
             LIMIT p_limit_size;
             EXIT WHEN aa_source_data.COUNT = 0;
             /* Process the batch of (p_limit_size) records... */
             FOR i IN 1 .. aa_source_data.COUNT
             LOOP
                PIPE ROW (aa_source_data (i));
             END LOOP;
          END LOOP;
          CLOSE p_source_data;
          RETURN;
       END processor;
       PROCEDURE with_pipeline (argA          IN     VARCHAR2,
                                argB          IN     VARCHAR2,
                                o_resultset      OUT resultset_typ)
       IS
       BEGIN
          OPEN o_resultset FOR
               SELECT /*+ PARALLEL(t, 5) */ colC,
                      SUM (CASE WHEN colD > colE AND colE != '0' THEN colD / ColE END)de,
                      SUM (CASE WHEN colE > colD AND colD != '0' THEN colE / ColD END)ed,
                      SUM (CASE WHEN colD = colE AND colD != '0' THEN '1' END) de_one,
                      SUM (CASE WHEN colD = '0' OR colE = '0' THEN '0' END) de_zero
                 FROM TABLE (processor (base_query (argA, argB),100)) t
             GROUP BY colC
             ORDER BY colC
       END with_pipeline;
       PROCEDURE no_pipeline (argA          IN     VARCHAR2,
                              argB          IN     VARCHAR2,
                              o_resultset      OUT resultset_typ)
       IS
       BEGIN
          OPEN o_resultset FOR
               SELECT colC,
                      SUM (CASE WHEN colD > colE AND colE  != '0' THEN colD / ColE END)de,
                      SUM (CASE WHEN colE > colD AND colD  != '0' THEN colE / ColD END)ed,
                      SUM (CASE WHEN colD = colE AND colD  != '0' THEN 1 END) de_one,
                      SUM (CASE WHEN colD = '0' OR colE = '0' THEN '0' END) de_zero
                 FROM (SELECT colC, colD, colE
                         FROM some_table
                        WHERE colA = ArgA AND colB = argB)
             GROUP BY colC
             ORDER BY colC;
       END no_pipeline;
    END pipeline_example;
    ALTER PACKAGE pipeline_example COMPILE;Edited by: Earthlink on Nov 14, 2010 9:47 AM
    Edited by: Earthlink on Nov 14, 2010 11:31 AM
    Edited by: Earthlink on Nov 14, 2010 11:32 AM
    Edited by: Earthlink on Nov 20, 2010 12:04 PM
    Edited by: Earthlink on Nov 20, 2010 12:54 PM

    Earthlink wrote:
    Contrary to my understanding, the <font face="courier">with_pipeline</font> procedure runs 6 time slower than the legacy <font face="courier">no_pipeline</font> procedure. Am I missing something? Well, we're missing a lot here.
    Like:
    - a database version
    - how did you test
    - what data do you have, how is it distributed, indexed
    and so on.
    If you want to find out what's going on then use a TRACE with wait events.
    All nessecary steps are explained in these threads:
    HOW TO: Post a SQL statement tuning request - template posting
    http://oracle-randolf.blogspot.com/2009/02/basic-sql-statement-performance.html
    Another nice one is RUNSTATS:
    http://asktom.oracle.com/pls/asktom/ASKTOM.download_file?p_file=6551378329289980701

  • Issues with Form printing using a 3rd party software!!!!!!!!!!!!!!!11

    Hi All,
    We are printing our month end AR statements using Xerox DP100 printers. We are using a SAP Script as the layout form. Everything works perfectly alright when a direct print is issued to the printer. But the scenario here is the statements are sent to a 3rd party software so that the statements can be saved in their repository and made available to be viewed and printed whenever necessary. Now the issue is when this 3rd Party Software(TPS) reads the SAP generated PCL from its report store on the unix host and generates a PDF File that it presents to the web client user for (re)printing via his/her PC it appears that the TPS or Websphere or Adobe is performing a font substituion - replacing the Univers font(used in R/3) which is not loaded on the unix host with a different font(with different sizing and/or behavior).
    As a result the horizontal and vertical positioning generated by SAP(which is correct for the Univers font) is 'wrong' for the substituted font. The fixed size fields print OK but gradually move to the right. The varying size amount columns do not align correctly and fall off the right side of the page.
    Can anyone give me pointers on what can be done to arrest this error.
    Does the font need to be loaded on the unix host or the font used in the form be changed?
    Regards,
    Karthik

    Karthik,
              Sap script behaves differently for different printers. You will have to change margins when you change your printer/software accordingly.

  • Issue with Delta in Function Module

    Hi Team,
    I have an issue with delta in Genric extraction using function module.Full load is working fine and i have taken post_date as delta field.plz chk the code if any delta related statements are missing.
    FUNCTION ZRSAX_BIW_MANGEMENT_RAT .
    ""Local interface:
    *"  IMPORTING
    *"     VALUE(I_REQUNR) TYPE  SRSC_S_IF_SIMPLE-REQUNR
    *"     VALUE(I_DSOURCE) TYPE  SRSC_S_IF_SIMPLE-DSOURCE OPTIONAL
    *"     VALUE(I_MAXSIZE) TYPE  SRSC_S_IF_SIMPLE-MAXSIZE OPTIONAL
    *"     VALUE(I_INITFLAG) TYPE  SRSC_S_IF_SIMPLE-INITFLAG OPTIONAL
    *"     VALUE(I_READ_ONLY) TYPE  SRSC_S_IF_SIMPLE-READONLY OPTIONAL
    *"  TABLES
    *"      I_T_SELECT TYPE  SRSC_S_IF_SIMPLE-T_SELECT OPTIONAL
    *"      I_T_FIELDS TYPE  SRSC_S_IF_SIMPLE-T_FIELDS OPTIONAL
    *"      E_T_DATA STRUCTURE  ZQMBW_FUJ_MANAGEMENT OPTIONAL
    *"  EXCEPTIONS
    *"      NO_MORE_DATA
    *"      ERROR_PASSED_TO_MESS_HANDLER
    Example: DataSource for table MANAGEMENT RATING
      TABLES: ZQMBW_MANAGEMENT.
    Auxiliary Selection criteria structure
      DATA: L_S_SELECT TYPE SRSC_S_SELECT.
    Maximum number of lines for DB table
      STATICS: S_S_IF TYPE SRSC_S_IF_SIMPLE,
    counter
              S_COUNTER_DATAPAKID LIKE SY-TABIX,
    cursor
              S_CURSOR TYPE CURSOR.
      RANGES: POST_DATE FOR ZMMTVEND_RATING-POST_DATE,
              VENDOR FOR ZMMTVEND_RATING-VENDOR.
    Initialization mode (first call by SAPI) or data transfer mode
    (following calls) ?
      IF I_INITFLAG = SBIWA_C_FLAG_ON.
    Initialization: check input parameters
                    buffer input parameters
                    prepare data selection
    Check DataSource validity
        CASE I_DSOURCE.
          WHEN 'ZQMMANAGEMENT_DS'.
          WHEN OTHERS.
            IF 1 = 2. MESSAGE E009(R3). ENDIF.
    this is a typical log call. Please write every error message like this
            LOG_WRITE 'E'                  "message type
                      'R3'                 "message class
                      '009'                "message number
                      I_DSOURCE   "message variable 1
                      ' '.                 "message variable 2
            RAISE ERROR_PASSED_TO_MESS_HANDLER.
        ENDCASE.
        APPEND LINES OF I_T_SELECT TO S_S_IF-T_SELECT.
    Fill parameter buffer for data extraction calls
        S_S_IF-REQUNR    = I_REQUNR.
        S_S_IF-DSOURCE = I_DSOURCE.
        S_S_IF-MAXSIZE   = I_MAXSIZE.
    Fill field list table for an optimized select statement
    (in case that there is no 1:1 relation between InfoSource fields
    and database table fields this may be far from beeing trivial)
        APPEND LINES OF I_T_FIELDS TO S_S_IF-T_FIELDS.
      ELSE.                 "Initialization mode or data extraction ?
        IF S_COUNTER_DATAPAKID = 0.
    Fill range tables BW will only pass down simple selection criteria
    of the type SIGN = 'I' and OPTION = 'EQ' or OPTION = 'BT'.
          LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'VENDOR'.
            MOVE-CORRESPONDING L_S_SELECT TO VENDOR.
            CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
              EXPORTING
                INPUT  = VENDOR-LOW
              IMPORTING
                OUTPUT = VENDOR-LOW.
            CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
              EXPORTING
                INPUT  = VENDOR-HIGH
              IMPORTING
                OUTPUT = VENDOR-HIGH.
            APPEND VENDOR.
          ENDLOOP.
          LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'POST_DATE'.
            MOVE-CORRESPONDING L_S_SELECT TO POST_DATE.
            CONCATENATE L_S_SELECT-LOW6(4)  L_S_SELECT-LOW3(2) L_S_SELECT-LOW+0(2) INTO POST_DATE-LOW.
            CONCATENATE L_S_SELECT-HIGH6(4)  L_S_SELECT-HIGH3(2) L_S_SELECT-HIGH+0(2) INTO POST_DATE-HIGH.
            APPEND POST_DATE.
          ENDLOOP.
    **Get Management rating details
          OPEN CURSOR WITH HOLD S_CURSOR FOR
          SELECT VENDOR POST_DATE OVERALL_MNGT_RAT OVERALL_DEV_RAT FROM ZMMTVEND_RATING WHERE VENDOR IN VENDOR AND POST_DATE IN POST_DATE .
        ENDIF.
    Fetch records into interface table.
        FETCH NEXT CURSOR S_CURSOR
                   APPENDING CORRESPONDING FIELDS
                   OF TABLE E_T_DATA
                   PACKAGE SIZE S_S_IF-MAXSIZE.
        S_COUNTER_DATAPAKID = S_COUNTER_DATAPAKID + 1.
        IF SY-SUBRC <> 0.
          CLOSE CURSOR S_CURSOR.
          RAISE NO_MORE_DATA.
        ENDIF.
      ENDIF.              "Initialization mode or data extraction ?
    ENDFUNCTION.

    Hi
    Check URLs:
    How to populate the ranges using FM for the SELECTs
    Re: Generic Delta Function Module

  • RXTX Parallel port communication with Pin Printer

    I have successfully installed and configured RXTX-2.0-7pre1 on Linux platform.
    2 printers, one Laser jet printer connected to the Serial port and the other Pin Printer connected to the Parallel port.
    I can print my files out successfully with RXTX on both my 2 printers. But, there is some problem with my Pin Printer performance. The print job is a little slow and the printing is word by word output.
    While the Laser printer received the whole string of my RXTX output and printed them out asap.
    RXTX read my data and write them to the Parallel/Serial port directly, so, for my laser jet printer, it buffered the RXTX output data and processed them all in one. No problem, laser printer works well. But to the Pin Printer, it got the RXTX output and printed them out with no buffer. I am not authorized to deal with the Pin Printer device driver.
    So, my question is that, is there someone knows how to resolve this problem on RXTX side? That is to say, how to modify the source code of RXTX and customize it?
    I wanna know how to create buffer in RXTX, for example, buffering a whole string line and then sending them to the Parallel port. Then, It supposed to be that the Pin Printer will receive once a whole line output and printing line by line in the paper! Not the problemly slowly word by word output!
    Thanks a lot!

    Simple metrics from google should suffice the SUN team from understand the need/huge requirement for supporting Serial and parallel port programming in windows. Platforms would always change and the team at SUN should remain commited in supporting new platforms.

  • Issues with iCloud tabs function

    I am having issues with the iCloud tabs function in Safari 6. even though i have turned on the Safari Prefrences in iCloud the tabs open on my iPad 2 do not appear on my Mac. Your help is much appreciated

    The iCloud Safari tab feature won't be available until iOS 6 is available for iOS based devices this fall >  Apple - iOS 6 Preview
    See Number 6 >   Apple - OS X Mountain Lion — Use your Mac in so many new ways.
    "iCloud Tabs on iPhone, iPad, and iPod touch requires iOS 6."

  • PM Shop paper cannot be print with direct "Print/Fax"

    Hi everybody,
    I have a issue when printing work order, the PM work order cannot be printed by clicking the "Print/Fax" button, but it can be print by clicking the button "Print" in the print preview screen. and if I deselect the "print immediately" parameter in select shop paper screen, no recorde was created in SP01.
    how to fix this issue,
    regards

    Alan,
    This is spookily close to this post: PM Shop paper not able to print with  direct button
    PeteA

  • New HH3 - Issues with Kodak Printer and iPhone 3GS

    Hello,
    Here is the background:
    Previously had a D-Link DSL-G624M router and everything connected wirelessly. This included 2 laptops, Kodak ESP 5250 Printer and iPhone 3GS. Router broadcasting on channel 6 (locked).
    Since upgrading to Infinity replaced the D-Link with a HH3. Laptops connect fine but have issues with other wireless devices.
    iPhone: Seems to lose internet (not necessarily wireless connection though) intermittently. The phone remains connected to the HH3 and can be seen in the DHCP table and Home Network screens. The iPhone also reports that it is connected to the HH3. However, when attempting to access the internet using either Safari or apps it doesn't work. This can be fixed by forgetting the network and re-joining or turning Airplane Mode on and then off.
    Kodak ESP5250 Printer: This connects fine to the HH3 and remains in the DHCP table and Home Network with the correct IP Address. Laptop A is able to connect and print successfully. However, after putting the laptop into sleep mode and re-waking it it is unable to Print. The Printer is still connected to the HH3 and laptop claims it is 'Ready' but unable to print. The only way i have found to fix this is to re-install the entire Printer software!! However, Laptop B does not have this problem and can be put into Sleep mode, Hibernate or restart and the printer remain connected. I do not think it is a firewall issue as able to connect until re-waking from sleep.
    You're probably thinking the same as me that this sounds like hardware issues and not the HH3. Maybe coincidence that it started happening after changing to HH3. Maybe something wrong with the iPhone or Laptop A and/or Printer?!? Tried setting a manual channel on the HH3 as suggested by other posts but this had no effect. (Used inSSIDer to determine best channel). Also increased the IP Address lease time from 1 Day to 21 Days - but again no difference.
    Current situation: Connected the D-Link router to the HH3 using Ethernet cable. Disabled DHCP and DNS on the D-Link router and kept SSID different. Now connected all devices to the D-Link router and nothing to the HH3 and everything is working as it did previously. The iPhone remains stable and the Kodak printer remains connected to both Laptops after re-waking from Sleep Mode.
    I haven't yet contacted BT but i'm leaning towards it being a dodgy HH3. Anyone have any suggestions??
    Thanks,
    Martyn...

    For starters, there's nothing wrong with your Iphone or Kodak prn. The issue is the HH3
    I had a very similar issue connecting iMac, iPad, Macbook Pro, iPhone, Thinkpad and Canon prn via wireless to the HH3... Lots of disconnections, devices that couldn't log in, very low wireless speeds, printer not recognized, etc,etc
    I went mad, pretty much did the same things as you did: inSSIDer, changing channels, re-installing whole softw drv !, reorientating HH3 position, manually assigning IPs and channels... nothing would seem to work!
    Then I connected a Netgear router to HH3 via ethernet cable -like you did- and suddenly everything seemed to go back to normal. Here's what I found out after much head knocking:
    1) The issue is the HH3, not that it's faulty but simply put it can't deal with lots of wireless traffic. The minute you connect several devices it gets clogged up
    2) HH3 seem not to recognize WiFI printers that have a 'static' IP (not sure why)...  this was a nightmare
    3) if you have many devices connected, HH3 doesn't  seem to 'like' Apple devices or wifi Airport powered (not sure why). After sleep mode these device can't pick up IP over the air, and you need to manually renew DHCP leases. There are several reports about this in Apple forums.
    So here's what I did:
    1) I ditched the HH3
    2) I connected the Openreach router to a dual-band Netgear wndr3400 **cable** router (PPPoE connection)
    3) I re-installed the prn drv in USB mode and then added wifi printer in wifi mode while usb connected
    4) I created two-split WIFI networks; one in the channel 6/2.4Ghz frequency and another in the channels 44-48/5Ghz freq to which I assigned most devices (It seems BT Infinity wifi works best in 5Ghz channels)
    Results: all devices recognised & connected via WiFI, no disconnections, steady WIFI speed almost as fast as ethernet cable, wifi prn prints fine from all devices... No more WIFI connnectivity issues.
    I hope this helps, good luck
    (note: my current issue is that my profile dropped from 34/8 to 21/2 during testing phase)

  • Problem with Direct printing of PDF with Barcodes in R12

    Hi All,
    We are facing a problem in direct printing in EBS R12 with xml pdf reports which contains some barcode fonts. We are using fonts from IDAutomation for barcodes. Printing from request output is working fine. But when it is printed directly everything get printed other than the barcodes. Did anybody face this problem before and fixed it?
    Regards,
    Benny

    Benny,
    Output from XML Publisher comes out correctly. The barcodes are stripped off during pdftops conversion. Any idea?
    How did you verify the above?
    PASTA 3.0 Release Information (Doc ID 239196.1)
    BIP PDF Output Does Not Print MICRD Barcode Font - View Output Ok (Doc ID 747195.1)
    Thanks,
    Hussein

  • Issue with remote printing

    Hello
    we have an issue with printing from redirected printer
    on the local machine Windows 8.1 i have a printer installed and when i try to print from a remote pc to my installed printer on my local pc the paper type is replaced.
    on the local printer it was set to letter but on the remote the redirected printer is set to legal.
    i try to switch it to letter but it was not kept it switch back to legal.
    any adviced will be good ?
    Thanks

    Hi,
    What's the operating system of remote PC we log onto? Here, I am not sure that this can help but we can give a try by disabling the following policy setting:
    Computer Configuration\Policies\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Printer Redirection\Use Remote Desktop Easy Print printer driver first
    Regarding this point, the following KB article can be referred to for more information.
    The client printer may print the documents by using an incorrect paper size if the "Use Remote Desktop Easy Print printer driver first" policy is enabled
    https://support.microsoft.com/en-us/kb/980056
    Best regards,
    Frank Shen
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • Issue with use of Function Module GUI_UPLOAD

    Hi Experts,
    I have an issue in using the Function Module GUI_UPLOAD for uploading the contents of an Excel file on the Presentation Server to an internal table in an ABAP Program.
    My file consists of around 300 records but the FM succeeds in uploading only the first 6 lines to the Internal Table specified while calling the FM.
    I dont have any idea why this happens. Any pointers in this direction will be helpful.
    Thanks in advance.
    Regards,
    Keerthi

    Hi,
    Kindly go through this link below:
    https://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=60655105
    Hope it helps you
    Regards
    Mansi

Maybe you are looking for