Issue in using radio button in module pool

For same field I need 2 different search help. Based on radio button on screen I need company codeu2019s from different table. Issue is, at execution radio button remains blank. Radio button works only when I use them in PAI under CASE SY-UCOMM. WHEN u2018DONEu2019. IF Normal_Run = u2018Xu2019u2026u2026
Can I use radio button with the below code. Please refer the below code.
PROCESS ON VALUE-REQUEST.
FIELD COMP_CODE MODULE POPULATE_COMP_CODE.
MODULE POPULATE_COMP_CODE INPUT.
IF REPEAT_RUN = 'X'.
PERFORM COMP_CODE_POPULATE.
ELSEIF NORMAL_RUN = 'X'.
PERFORM COMP_CODE_POPULATE_N.
ENDIF.
ENDMODULE.
FORM COMP_CODE_POPULATE .
    SELECT COMP_CODE
      FROM ZIFRS_D_PROCESS
      INTO CORRESPONDING FIELDS OF TABLE VALUES_TAB_CC
      WHERE PROC_NAME = 'DEPRECIATION RUN'.
READ TABLE VALUES_TAB INDEX 1.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      RETFIELD    = 'COMP_CODE'
      DYNPPROG    = PROGNAME
      DYNPNR      = DYNNUM
      DYNPROFIELD = 'COMP_CODE'
      VALUE_ORG   = 'S'
    TABLES
      VALUE_TAB   = VALUES_TAB_CC.
ENDFORM.                    " COMP_CODE_POPULATION
FORM COMP_CODE_POPULATE_N .
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
    EXPORTING
      TABNAME     = '/BI0/SCOMP_CODE'
      FIELDNAME   = 'COMP_CODE'
      DYNPPROG    = PROGNAME
      DYNPNR      = DYNNUM
      DYNPROFIELD = 'COMP_CODE'.
ENDFORM.                    " COMP_CODE_POPULATE_N
Moderator Message: Please use "code" tags to format the code snippet.
Edited by: Suhas Saha on Nov 23, 2011 5:13 PM

Hi
You need to make the Grouping for these Radio button on the screen
Search for how to make Radio buttons grouping
radio buttons in screen painter
http://help.sap.com/printdocu/core/print46c/en/data/pdf/BCDWBTUT/BCDWBTUT.pdf
and search for Radio button Group in this document
assign a Function Code for one of the radio buttons(It allows for only one Radio Button)
This triggers automatic PAI so when you take the F4 Help this is readily available
In TOP include make sure you define the variables corresponding to the Radio buttons on the screen and also provide default value X to one of the Radio buttons
Hope this serves your purpose
Cheerz
Ramchander Rao.K

Similar Messages

How to define RADIO BUTTONS in MODULE POOL PROG.?

Hi Experts,
I need to keep the RADIO BUTTONS in 1000_screen of my_module_pool prog., like,
I hv 2 fields in this screen, as expected, the first shuld hv DEFAULT selection.
So, I just simply, dragged & dropped 2 radio buttons from left menu of the screen builder & given them the names as
R_SUMMARY
R_DETAIL
Then i executed the transaction, but, these above 2 fields are getting selected, as default??
I know that, if its a REPORT prog. we can define as w/ a GROUP, then the 1st one is hv the default selection.
so,
1 - How to define RADIO BUTTONS in this screen of a module pool prog.
2 - How to use these names in the prog.(PAI - i guess)?
thanq
Edited by: Srinivas on Jul 12, 2008 11:59 PM

Hi Srinivas,
Please check this link
Re: urgent:Regd radio buttons in module pool
http://saplab.blogspot.com/2007/10/sample-abap-program-for-module-pool_18.html
http://****************/Tutorials/ABAP/Checkbox/page1.htm
http://****************/Tutorials/ABAP/Checkbox/page2.htm
Best regards,
raam

How to raise pop up window along with radio buttons in module pool program

how to raise pop up window along with radio buttons in module pool program

FUNCTION zscheme_determination.
*"*"Local Interface:
*" IMPORTING
*"     REFERENCE(I_KUNNR) TYPE KUNNR
*" EXPORTING
*"     REFERENCE(E_VALUE) TYPE NETWR_AK
*" TABLES
*"      G_ITEM_DATA_ITAB STRUCTURE ZITEM_DATA
* TYPES: BEGIN OF ty_sord,
*         include type ZSD_SCHEME_DTL,
*         END   OF ty_sord.
* data : gt_sord type standard table of ZSD_SCHEME_DTL,
*         wa_sord type ZSD_SCHEME_DTL.
* select * from ZSD_SCHEME_DTL into table
* gt_sord
* where matnr = i_matnr.
* T_ITEM_DATA
*********Data Declarations
   DATA:
         salesdocumentin LIKE bapivbeln-vbeln,
         orderheaderin LIKE bapisdhd1,
         orderheaderinx LIKE bapisdhd1x,
         sender LIKE bapi_sender,
         binaryrelationshiptype LIKE bapireltype-reltype,
         intnumberassignment LIKE bapiflag-bapiflag,
         behavewhenerror LIKE bapiflag-bapiflag,
         logicswitch LIKE bapisdls,
         testrun LIKE bapiflag-bapiflag,
         convert LIKE bapiflag-bapiflag,
         return LIKE bapiret2 OCCURS 0,
         orderitemsin LIKE bapisditm OCCURS 0,
         orderitemsinx LIKE bapisditmx OCCURS 0,
         orderpartners LIKE bapiparnr OCCURS 0,
         orderschedulesin LIKE bapischdl OCCURS 0,
         orderschedulesinx LIKE bapischdlx OCCURS 0,
         orderconditionsin LIKE bapicond OCCURS 0,
         orderconditionsinx LIKE bapicondx OCCURS 0,
         ordercfgsref LIKE bapicucfg OCCURS 0,
         ordercfgsinst LIKE bapicuins OCCURS 0,
         ordercfgspartof LIKE bapicuprt OCCURS 0,
         ordercfgsvalue LIKE bapicuval OCCURS 0,
         ordercfgsblob LIKE bapicublb OCCURS 0,
         ordercfgsvk LIKE bapicuvk OCCURS 0,
         ordercfgsrefinst LIKE bapicuref OCCURS 0,
         orderccard LIKE bapiccard OCCURS 0,
         ordertext LIKE bapisdtext OCCURS 0,
         orderkeys LIKE bapisdkey OCCURS 0,
         extensionin LIKE bapiparex OCCURS 0,
         partneraddresses LIKE bapiaddr1 OCCURS 0.
   DATA : wa_orderpartners LIKE bapiparnr,
          wa_orderitemsin LIKE bapisditm,
          wa_orderitemsinx LIKE bapisditmx,
          wa_orderschedulesin LIKE bapischdl,
          wa_orderschedulesinx LIKE bapischdlx,
          wa_orderconditionsin LIKE bapicond,
          wa_orderconditionsinx LIKE bapicondx,
          wa_return LIKE bapiret2,
          lv_value TYPE netwr_ak.
   DATA : lv_dtyp TYPE char45,
          lv_sorg TYPE vkorg,
          lv_sdch TYPE vtweg,
          lv_sdiv TYPE spart.
   TYPES : BEGIN OF ty_sord,
           zsdscheme TYPE comt_scheme_id,
           posnr TYPE posnr_va,
           matnr TYPE matnr,
           disc_type TYPE rebate_disc_type,
           calc_type TYPE catyp,
           qty_from TYPE kwmeng,
           qty_to TYPE kwmeng,
           spart TYPE spart,
           custcondgrp TYPE kdkg1,
           werks TYPE werks_d,
           matmn TYPE matnr,
           END   OF ty_sord.
   DATA : gt_sord   TYPE STANDARD TABLE OF ty_sord,
          gt_sordd TYPE STANDARD TABLE OF ty_sord,
          wa_sord TYPE ty_sord,
          wa_knvv TYPE knvv,
          lv_cal_foc TYPE p DECIMALS 3,
          lv_cal_dis TYPE p DECIMALS 3,
          lv_new_qty TYPE kwmeng,
          lv_posmat TYPE posnr_va,
          lv_posfoc TYPE posnr_va.
   DATA:lv_diff TYPE kwmeng.
******Schemes Selection Logic
* Get Valid Schemes
* Validate Scheme for validity Period, Material, Customer Type and Plant
   TYPES : BEGIN OF ty_rtab,
           sign   TYPE c LENGTH 1,
           option TYPE c LENGTH 2,
           low    LIKE mara-matnr,
           high   LIKE mara-matnr,
         END OF ty_rtab.
* TYPES : ty_matnr TYPE RANGE OF ty_rtab.
   DATA : it_matnr TYPE TABLE OF ty_rtab,
          wa_matnr TYPE ty_rtab,
          wa_it    TYPE zitem_data,
         wa_tab TYPE zitem_data.
*order table declaration
   TYPES:
         BEGIN OF ty_order,
           zsdscheme TYPE comt_scheme_id,
           matnr     TYPE matnr,
           kwmeng    TYPE kwmeng,
         END OF ty_order,
   BEGIN OF ty_scheme,
    zsdscheme TYPE comt_scheme_id,
*                matnr     TYPE matnr,
    kwmeng    TYPE kwmeng,
END OF ty_scheme.
   DATA:
         gt_order      TYPE TABLE OF ty_order,
         gt_scheme     TYPE TABLE OF ty_scheme,
          wa_scheme    TYPE ty_scheme,
          wa_order     TYPE ty_order.
   DATA:i_kwmeng TYPE kwmeng.
* Transfer all the material received from order to internal table
   LOOP AT g_item_data_itab INTO wa_it.
     MOVE : wa_it-matnr TO wa_matnr-low,
            'I'          TO wa_matnr-sign,
            'EQ'         TO wa_matnr-option.
     APPEND wa_matnr TO it_matnr.
     CLEAR wa_it.
   ENDLOOP.
* Get the Valid Schemes based on given criteria
   SELECT
           zsd_scheme_dtl~zsdscheme
           zsd_scheme_dtl~posnr
           zsd_scheme_dtl~matnr
           zsd_scheme_dtl~disc_type
           zsd_scheme_dtl~calc_type
           zsd_scheme_dtl~qty_from
           zsd_scheme_dtl~qty_to
           zsd_scheme~spart
           zsd_scheme_hdr~custcondgrp
           zsd_scheme_hdr~werks
           zsd_scheme_hdr~matnr
   FROM zsd_scheme_hdr
   INNER JOIN zsd_scheme ON zsd_scheme~zsdscheme = zsd_scheme_hdr~zsdscheme
   INNER JOIN zsd_scheme_dtl ON zsd_scheme_dtl~zsdscheme = zsd_scheme_hdr~zsdscheme
   INTO TABLE gt_sord
   WHERE zsd_scheme_dtl~matnr IN it_matnr
*    zsd_scheme_hdr~matnr IN it_matnr
*    AND zsd_scheme_hdr~werks = '1509'
     AND zsd_scheme_hdr~werks = '1529'
     AND zsd_scheme_hdr~custcondgrp = '01'
     AND zsd_scheme~datuv LE sy-datum
     AND zsd_scheme~datub GE sy-datum.
   SORT gt_sord BY zsdscheme ASCENDING.
* LOOP AT gt_sord INTO wa_sord.
*    READ TABLE g_item_data_itab INTO wa_it WITH KEY matnr = wa_sord-matnr.
*    wa_order-zsdscheme = wa_sord-zsdscheme.
*    wa_order-matnr = wa_it-matnr.
*    wa_order-kwmeng = wa_it-kwmeng.
*    COLLECT wa_order INTO gt_order.
*    CLEAR wa_order.
* ENDLOOP.
   LOOP AT g_item_data_itab INTO wa_it.
     READ TABLE gt_sord INTO wa_sord WITH KEY matnr = wa_it-matnr.
     wa_order-zsdscheme = wa_sord-zsdscheme.
     wa_order-matnr = wa_it-matnr.
     wa_order-kwmeng = wa_it-kwmeng.
     COLLECT wa_order INTO gt_order.
     MOVE : wa_sord-zsdscheme TO wa_scheme-zsdscheme,
            wa_it-kwmeng TO wa_scheme-kwmeng.
     COLLECT wa_scheme INTO gt_scheme.
     CLEAR : wa_order, wa_scheme.
   ENDLOOP.
   CLEAR wa_scheme.
   DATA w_line TYPE sy-tabix.
* Updating table based on Schemes
   LOOP AT gt_scheme INTO wa_scheme.
     CLEAR w_line.
     gt_sordd[] = gt_sord[].
*    DELETE gt_sordd WHERE zsdscheme NE wa_scheme-zsdscheme and disc_type NE 'FOC'.
     DELETE gt_sordd WHERE zsdscheme NE wa_scheme-zsdscheme AND disc_type NE 'F'.
     DELETE ADJACENT DUPLICATES FROM gt_sordd COMPARING zsdscheme matnr.
     DESCRIBE TABLE gt_sordd LINES w_line.
     IF w_line GT 1.
* popup message to select one foc type.
     ELSE.
       CLEAR wa_sord.
       READ TABLE gt_sordd INTO wa_sord INDEX 1.
       IF sy-subrc EQ 0.
         i_kwmeng = wa_scheme-kwmeng.
         lv_cal_foc = i_kwmeng DIV wa_sord-qty_from.
         lv_cal_dis = i_kwmeng MOD wa_sord-qty_from.
         MOVE : lv_cal_foc TO wa_it-kwmeng,
                wa_sord-matnr TO wa_it-matnr.
         APPEND wa_it TO g_item_data_itab.
         SORT gt_order BY kwmeng DESCENDING.
         LOOP AT gt_order INTO wa_order WHERE zsdscheme = wa_scheme-zsdscheme.
           IF lv_cal_dis GT 0.
*        LOOP AT gt_order INTO wa_order WHERE zsdscheme = wa_scheme-zsdscheme
*                                             AND lv_cal_dis GT 0.
*                  LOOP AT gt_order INTO wa_order WHERE zsdscheme = wa_scheme-zsdscheme.
*                LOOP AT g_item_data INTO wa_item_data WHERE matnr EQ wa_order-matnr.
                     LOOP AT g_item_data_itab INTO wa_tab WHERE matnr EQ wa_order-matnr.
                       wa_orderconditionsin-itm_number = wa_tab-posnr.
*                  wa_orderconditionsin-itm_number = wa_item_data-posnr.
                       wa_orderconditionsin-cond_st_no = '001'.
*                  IF gt_sordd-calc EQ ‘post AND disc_type EQ ‘percentage’.
                       IF wa_sord-calc_type EQ 'O' AND wa_sord-disc_type EQ 'P'.
                         wa_orderconditionsin-cond_type = 'ZTPB'.   "'ZREG'.
*                  ELSEIF gt_sordd-calc EQ ‘pre’ AND disc_type EQ ‘percentage’
                       ELSEIF wa_sord-calc_type EQ 'E' AND wa_sord-disc_type EQ 'P'.
                         wa_orderconditionsin-cond_type = 'ZTPP'.   "'ZREG'.
                       ENDIF.
                       wa_orderconditionsin-currency = 'INR'.
                       wa_orderconditionsin-conpricdat = sy-datum.
                       APPEND wa_orderconditionsin TO orderconditionsin.
                       CLEAR wa_orderconditionsin.
*Update Discount Conditon
                     ENDLOOP.
*                  ENDLOOP.
*Modify balance of Item
             CLEAR wa_tab.
             READ TABLE g_item_data_itab INTO wa_tab WITH KEY matnr = wa_order-matnr.
             IF sy-subrc EQ 0.
               lv_diff = wa_tab-kwmeng - lv_cal_dis.
               IF lv_diff GT 0.
                 wa_tab-kwmeng = wa_tab-kwmeng - lv_cal_dis.
*            MODIFY g_item_data TRANSPORTING kwmeng index sy-tabix.
                 MODIFY g_item_data_itab INDEX sy-tabix FROM wa_tab TRANSPORTING kwmeng .
               ELSE.
                 wa_tab-kwmeng = lv_cal_dis.
                 lv_cal_dis = lv_diff.
                 MODIFY g_item_data_itab INDEX sy-tabix FROM wa_tab TRANSPORTING kwmeng .
*            MODIFY G_ITEM_DATA_ITAB TRANSPORTING kwmeng index sy-tabix.
               ENDIF.
               gt_sordd[] = gt_sord[].
               DELETE gt_sordd WHERE zsdscheme NE wa_scheme-zsdscheme AND disc_type EQ 'F'.
               DESCRIBE TABLE gt_sordd LINES w_line.
               IF w_line GT 1.
                 SORT gt_sordd BY zsdscheme DESCENDING.
*              SORT gt_sordd BY quantity DESCENDING.
                 CLEAR wa_sord.
*              LOOP AT gt_sordd WHERE quantity_from LT wa_shceme-kwmeng AND quantity_to GT wa_shceme-kwmeng.
                 LOOP AT gt_sordd INTO wa_sord WHERE qty_from LT wa_scheme-kwmeng AND qty_to GT wa_scheme-kwmeng.
*             LOOP AT gt_order INTO wa_order WHERE scheme = wa_scheme-scheme.
                   LOOP AT gt_order INTO wa_order WHERE zsdscheme = wa_scheme-zsdscheme.
*                LOOP AT g_item_data INTO wa_item_data WHERE matnr EQ wa_order-matnr.
                     LOOP AT g_item_data_itab INTO wa_tab WHERE matnr EQ wa_order-matnr.
                       wa_orderconditionsin-itm_number = wa_tab-posnr.
*                  wa_orderconditionsin-itm_number = wa_item_data-posnr.
                       wa_orderconditionsin-cond_st_no = '001'.
*                  IF gt_sordd-calc EQ ‘post AND disc_type EQ ‘percentage’.
                       IF wa_sord-calc_type EQ 'O' AND wa_sord-disc_type EQ 'P'.
                         wa_orderconditionsin-cond_type = 'ZDPD'.   "'ZREG'.
*                  ELSEIF gt_sordd-calc EQ ‘pre’ AND disc_type EQ ‘percentage’
                       ELSEIF wa_sord-calc_type EQ 'E' AND wa_sord-disc_type EQ 'P'.
                         wa_orderconditionsin-cond_type = 'ZDPD'.   "'ZREG'.
                       ENDIF.
                       wa_orderconditionsin-currency = 'INR'.
                       wa_orderconditionsin-conpricdat = sy-datum.
                       APPEND wa_orderconditionsin TO orderconditionsin.
                       CLEAR wa_orderconditionsin.
*Update Discount Conditon
                     ENDLOOP.
                   ENDLOOP.
                 ENDLOOP.
               ELSE.
               ENDIF.
             ENDIF.
           ENDIF.
         ENDLOOP.
       ENDIF.
     ENDIF.
   ENDLOOP.
* select
*          ZSD_SCHEME_DTL~ZSDSCHEME
*          ZSD_SCHEME_DTL~POSNR
*          ZSD_SCHEME_DTL~matnr
*          ZSD_SCHEME_DTL~DISC_TYPE
*          ZSD_SCHEME_DTL~CALC_TYPE
*          ZSD_SCHEME_DTL~QTY_FROM
*          ZSD_SCHEME_DTL~QTY_TO
*          ZSD_SCHEME~SPART
*          ZSD_SCHEME_HDR~CUSTCONDGRP
*          ZSD_SCHEME_HDR~WERKS
*          ZSD_SCHEME_HDR~MATNR
* from ZSD_SCHEME_DTL
* inner join ZSD_SCHEME on ZSD_SCHEME~ZSDSCHEME = ZSD_SCHEME_DTL~ZSDSCHEME
* inner join ZSD_SCHEME_HDR on ZSD_SCHEME_HDR~ZSDSCHEME = ZSD_SCHEME_DTL~ZSDSCHEME
* into table
* gt_sord
* where ZSD_SCHEME_DTL~matnr = i_matnr and
*        ZSD_SCHEME~DATUV LE sy-datum and
*        ZSD_SCHEME~DATUB GE sy-datum.
* break-point.
* Process Common Logic for Schemes Processcing
   CLEAR wa_sord.
* Convert FOC Quantity and Materials
* LOOP AT gt_sord INTO wa_sord.
**   lv_cal = i_kwmeng / wa_sord-QTY_FROM.
*    lv_cal_foc = i_kwmeng DIV wa_sord-qty_from.
*    lv_cal_dis = i_kwmeng MOD wa_sord-qty_from.
* ENDLOOP.
*lv_new_qty = i_kwmeng - lv_cal_dis.
* Get the Sales Document Type
   SELECT SINGLE low
FROM tvarvc
INTO lv_dtyp WHERE
name = 'SD_DOC_TYPE'.
   SELECT SINGLE * FROM knvv INTO wa_knvv WHERE kunnr = i_kunnr.
   IF sy-subrc = 0.
     lv_sorg = wa_knvv-vkorg.
     lv_sdch = wa_knvv-vtweg.
     lv_sdiv = wa_knvv-spart.
   ENDIF.
* Give the Popup for schemes with multiple FOC
* Schemes Specific Processing
* Schemes Specific Processing
   orderheaderin-doc_type = lv_dtyp.
   orderheaderin-sales_org = lv_sorg.
   orderheaderin-distr_chan = lv_sdch.
   orderheaderin-division = lv_sdiv.
   wa_orderpartners-partn_role = 'AG'.
   wa_orderpartners-partn_numb = i_kunnr.
   APPEND wa_orderpartners TO orderpartners.
*    wa_ORDERPARTNERS-PARTN_ROLE = 'WE'.
*    wa_ORDERPARTNERS-PARTN_NUMB = p_ship.
*    append wa_ORDERPARTNERS to ORDERPARTNERS.
* Item number begin
   CLEAR : lv_posmat.
   lv_posmat = lv_posmat + 10.
   wa_orderitemsin-itm_number = lv_posmat.
   wa_orderitemsin-material = wa_sord-matmn. "i_matnr.
   wa_orderitemsin-target_qty = lv_new_qty.
* wa_ORDERITEMSIN-TARGET_QU = i_VRKME.
   APPEND wa_orderitemsin TO orderitemsin.
   wa_orderitemsinx-itm_number = lv_posmat.
   wa_orderitemsinx-material = 'X'.
   wa_orderitemsinx-target_qty = 'X'.
   wa_orderitemsinx-target_qu = 'X'.
   APPEND wa_orderitemsinx TO orderitemsinx.
   wa_orderschedulesin-itm_number = lv_posmat.
   wa_orderschedulesin-sched_line = lv_posmat.
   wa_orderschedulesin-req_qty = lv_new_qty.
   APPEND wa_orderschedulesin TO orderschedulesin.
   wa_orderschedulesinx-itm_number = lv_posmat.
   wa_orderschedulesinx-sched_line = lv_posmat.
   wa_orderschedulesinx-req_qty = 'X'.
   wa_orderschedulesinx-updateflag = 'X'.
   APPEND wa_orderschedulesinx TO orderschedulesinx.
   wa_orderconditionsin-itm_number = lv_posmat.
   wa_orderconditionsin-cond_st_no = '001'.
   wa_orderconditionsin-cond_type = 'ZDPD'.   "'ZREG'.
   wa_orderconditionsin-currency = 'INR'.
   wa_orderconditionsin-conpricdat = sy-datum.
   APPEND wa_orderconditionsin TO orderconditionsin.
   wa_orderconditionsinx-itm_number = lv_posmat.
   wa_orderconditionsinx-cond_st_no = '001'.
   wa_orderconditionsinx-cond_type = 'ZDPD'. "'ZREG'.
   wa_orderconditionsinx-updateflag = 'X'.
   wa_orderconditionsinx-cond_value ='X'.
   wa_orderconditionsinx-currency = 'X'.
   APPEND wa_orderconditionsinx TO orderconditionsinx.
****18/06Beg
* if not lv_cal_dis is initial.
*    lv_posmat = lv_posmat + 10.
*    wa_ORDERITEMSIN-ITM_NUMBER = lv_posmat.
*    wa_ORDERITEMSIN-MATERIAL = WA_SORD-MATMN. "i_matnr.
*    wa_ORDERITEMSIN-TARGET_QTY = lv_cal_dis.
** wa_ORDERITEMSIN-TARGET_QU = i_VRKME.
*    append wa_ORDERITEMSIN to ORDERITEMSIN.
*    wa_ORDERITEMSINX-ITM_NUMBER = lv_posmat.
*    wa_ORDERITEMSINX-MATERIAL = 'X'.
*    wa_ORDERITEMSINX-TARGET_QTY = 'X'.
*    wa_ORDERITEMSINX-TARGET_QU = 'X'.
*    append wa_ORDERITEMSINX to ORDERITEMSINX.
*    wa_ORDERSCHEDULESIN-ITM_NUMBER = lv_posmat.
*    wa_ORDERSCHEDULESIN-SCHED_LINE = lv_posmat.
*    wa_ORDERSCHEDULESIN-REQ_QTY = lv_cal_dis.
*    append wa_ORDERSCHEDULESIN to ORDERSCHEDULESIN.
*    wa_ORDERSCHEDULESINX-itm_number = lv_posmat.
*    wa_ORDERSCHEDULESINX-sched_line = lv_posmat.
*    wa_ORDERSCHEDULESINX-req_qty = 'X'.
*    wa_ORDERSCHEDULESINX-updateflag = 'X'.
*    append wa_ORDERSCHEDULESINX to ORDERSCHEDULESINX.
* endif.
* lv_posmat = lv_posmat + 10.
* wa_ORDERITEMSIN-ITM_NUMBER = lv_posmat.
* wa_ORDERITEMSIN-MATERIAL = i_matnr. "WA_SORD-MATMN.
* wa_ORDERITEMSIN-TARGET_QTY = LV_CAL_FOC.
* wa_ORDERITEMSIN-ITEM_CATEG = 'ZDGN'.
** wa_ORDERITEMSIN-TARGET_QU = i_VRKME.
* append wa_ORDERITEMSIN to ORDERITEMSIN.
* wa_ORDERITEMSINX-ITM_NUMBER = lv_posmat.
* wa_ORDERITEMSINX-MATERIAL = 'X'.
* wa_ORDERITEMSINX-TARGET_QTY = 'X'.
* wa_ORDERITEMSINX-TARGET_QU = 'X'.
* wa_ORDERITEMSINX-ITEM_CATEG = 'X'.
* append wa_ORDERITEMSINX to ORDERITEMSINX.
* wa_ORDERSCHEDULESIN-ITM_NUMBER = lv_posmat.
* wa_ORDERSCHEDULESIN-SCHED_LINE = lv_posmat.
* wa_ORDERSCHEDULESIN-REQ_QTY = LV_CAL_FOC.
* append wa_ORDERSCHEDULESIN to ORDERSCHEDULESIN.
* wa_ORDERSCHEDULESINX-itm_number = lv_posmat.
* wa_ORDERSCHEDULESINX-sched_line = lv_posmat.
* wa_ORDERSCHEDULESINX-req_qty = 'X'.
* wa_ORDERSCHEDULESINX-updateflag = 'X'.
* append wa_ORDERSCHEDULESINX to ORDERSCHEDULESINX.
****18/06End
* Item number end
* Switch off dialog (BAPIs always run without)
   CALL FUNCTION 'DIALOG_SET_NO_DIALOG'.
   CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT2'
     EXPORTING
*     SALESDOCUMENTIN               =
     order_header_in               = orderheaderin
*     ORDER_HEADER_INX              =
*     SENDER                        =
*     BINARY_RELATIONSHIPTYPE       =
*     INT_NUMBER_ASSIGNMENT         =
*     BEHAVE_WHEN_ERROR             =
*     LOGIC_SWITCH                  =
*     TESTRUN                       =
*     CONVERT                       = ' '
*   IMPORTING
*     SALESDOCUMENT                 =
   TABLES
     return                        = return
     order_items_in                = orderitemsin
     order_items_inx               = orderitemsinx
     order_partners                = orderpartners
     order_schedules_in            = orderschedulesin
     order_schedules_inx           = orderschedulesinx
     order_conditions_in           = orderconditionsin
     order_conditions_inx          = orderconditionsinx
*     ORDER_CFGS_REF                =
*     ORDER_CFGS_INST               =
*     ORDER_CFGS_PART_OF            =
*     ORDER_CFGS_VALUE              =
*     ORDER_CFGS_BLOB               =
*     ORDER_CFGS_VK                 =
*     ORDER_CFGS_REFINST            =
*     ORDER_CCARD                   =
*     ORDER_TEXT                    =
*     ORDER_KEYS                    =
*     EXTENSIONIN                   =
*     PARTNERADDRESSES              =
*    commit work.
   CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
*     EXPORTING
*       WAIT          =
*     IMPORTING
*       RETURN        =
   LOOP AT return INTO wa_return.
     WRITE:/ wa_return-message.
   ENDLOOP.
ENDFUNCTION.
*& Include ZSD_SO_CHANGES2_TOP                               Module Pool      ZSD_SO_CHANGES2
PROGRAM ZSD_SO_CHANGES2.
***&SPWIZARD: DATA DECLARATION FOR TABLECONTROL 'ITEM_DATA'
*&SPWIZARD: DEFINITION OF DDIC-TABLE
TABLES:   VBAP,kna1.
*&SPWIZARD: TYPE FOR THE DATA OF TABLECONTROL 'ITEM_DATA'
TYPES: BEGIN OF T_ITEM_DATA,
          POSNR LIKE VBAP-POSNR,
          MATNR LIKE VBAP-MATNR,
          KWMENG LIKE VBAP-KWMENG,
          VRKME LIKE VBAP-VRKME,
        END OF T_ITEM_DATA.
*&SPWIZARD: INTERNAL TABLE FOR TABLECONTROL 'ITEM_DATA'
DATA:     G_ITEM_DATA_ITAB   TYPE T_ITEM_DATA OCCURS 0,
           G_ITEM_DATA_WA     TYPE T_ITEM_DATA. "work area
DATA:     G_ITEM_DATA_COPIED.           "copy flag
*&SPWIZARD: DECLARATION OF TABLECONTROL 'ITEM_DATA' ITSELF
CONTROLS: ITEM_DATA TYPE TABLEVIEW USING SCREEN 4000.
DATA:GV_NUM TYPE I VALUE 1,
       GV_NUM2 TYPE I.
DATA:     G_T_YREC_TAB_LINES LIKE SY-LOOPC.***********top*************
*& Include ZSD_SO_CHANGES2_TOP                               Module Pool      ZSD_SO_CHANGES2
PROGRAM ZSD_SO_CHANGES2.
***&SPWIZARD: DATA DECLARATION FOR TABLECONTROL 'ITEM_DATA'
*&SPWIZARD: DEFINITION OF DDIC-TABLE
TABLES:   VBAP,kna1.
*&SPWIZARD: TYPE FOR THE DATA OF TABLECONTROL 'ITEM_DATA'
TYPES: BEGIN OF T_ITEM_DATA,
          POSNR LIKE VBAP-POSNR,
          MATNR LIKE VBAP-MATNR,
          KWMENG LIKE VBAP-KWMENG,
          VRKME LIKE VBAP-VRKME,
        END OF T_ITEM_DATA.
*&SPWIZARD: INTERNAL TABLE FOR TABLECONTROL 'ITEM_DATA'
DATA:     G_ITEM_DATA_ITAB   TYPE T_ITEM_DATA OCCURS 0,
           G_ITEM_DATA_WA     TYPE T_ITEM_DATA. "work area
DATA:     G_ITEM_DATA_COPIED.           "copy flag
*&SPWIZARD: DECLARATION OF TABLECONTROL 'ITEM_DATA' ITSELF
CONTROLS: ITEM_DATA TYPE TABLEVIEW USING SCREEN 4000.
DATA:GV_NUM TYPE I VALUE 1,
       GV_NUM2 TYPE I.
DATA:     G_T_YREC_TAB_LINES LIKE SY-LOOPC.
************************pbo*******************
*& Include           ZSD_SO_CHANGES2_PBO
*&SPWIZARD: OUTPUT MODULE FOR TC 'ITEM_DATA'. DO NOT CHANGE THIS LINE!
*&SPWIZARD: COPY DDIC-TABLE TO ITAB
MODULE ITEM_DATA_INIT OUTPUT.
   IF G_ITEM_DATA_COPIED IS INITIAL.
*&SPWIZARD: COPY DDIC-TABLE 'VBAP'
*&SPWIZARD: INTO INTERNAL TABLE 'g_ITEM_DATA_itab'
*    SELECT * FROM VBAP
*       INTO CORRESPONDING FIELDS
*       OF TABLE G_ITEM_DATA_ITAB.
*    G_ITEM_DATA_COPIED = 'X'.
     REFRESH CONTROL 'ITEM_DATA' FROM SCREEN '4000'.
   ENDIF.
   ITEM_DATA-LINES = G_T_YREC_TAB_LINES + 15.
ENDMODULE.
*&SPWIZARD: OUTPUT MODULE FOR TC 'ITEM_DATA'. DO NOT CHANGE THIS LINE!
*&SPWIZARD: MOVE ITAB TO DYNPRO
MODULE ITEM_DATA_MOVE OUTPUT.
   MOVE-CORRESPONDING G_ITEM_DATA_WA TO VBAP.
ENDMODULE.
*&      Module STATUS_4000 OUTPUT
*       text
MODULE STATUS_4000 OUTPUT.
   SET PF-STATUS 'APAR'.
* REFRESH G_ITEM_DATA_ITAB.
    GV_NUM = 1.
* SET TITLEBAR 'xxx'.
ENDMODULE.                 " STATUS_4000 OUTPUT

Func- Code for Radio-button in Module-pool Prg.

Hi Friend's.
I have define 2 Radio button
on Module-pool screen.
I am not been able to triger the Radio button in
Pai .
How can i assign the function code for
radio-button in module-pool.
pls can any one help me

Hi,
For radion buttons, what ever the name you will give that name only will hold that value ( Either selected or not ). But this variable should be declared as global variable in main program.
Still if you want to assign function code, you can assign one like other fields on the screen.

How to create radio button in module pool

Hi All,
Please tell me step by step procedure for creating radio button in module pool.give code for two radiobutton and at a time only one should be selected.
Thanks
Narendra

Hi naren,
In the layout of screen painter click on radiobutton option in the left icons and create in the layout and give name as Radio1 and again select the radiobutton icon and create another and give the name as radio2 and by dragging the cursor select the 2 radiobuttons and goto menubar->edit->grouping->radiobuttons grouping->define.
Double clcik on the 2 radiobuttons and give FCT code for the coding purpose of the 2 radiobuttons.
Cheers!!
VEnk@

Radio button in module pool

In ordinary report programs, if we want to change screen value according to the selection of radion button, we use user command and at user command options.
But how do i do it in module pool programming.
Like in module pool if i select one radio button some input fields should be non edidtable.

Hi,
DATA: OK_CODE TYPE SY-UCOMM,
      PROCESS_CODE TYPE SY-UCOMM.
<b>In PAI</b>
MODULE USER_COMMAND_0100.
   PROCESS_CODE = OK_CODE.
CLEAR OK_CODE.
CASE PROCESS_CODE.
WHEN 'RADIO'. " RADIO is the function code for the radibuttons.
      IF R1 = 'X'.
        R2 = SPACE.
      ELSEIF R2 = 'X'.
        R1 = SPACE.
      ENDIF.
ENDCASE.
Hope this helps.
Reward if helpful.
Regards,
Sipra

Creating Radio Button on Module pool Screen

Hi Gurus,
I am currently working on a program which involves module pool selection screen. In my selection screen i have placed 2 radio buttons, i have kept these radio buttons in same group. But when i am running the program both the radio buttons appear as checked. Could any one help me on that.......I need only one radio button to be checked at a time ..
Thanks in advance....
Regards,
Shiv.

hI,
IT IS HIGHLY IMPOSSIBLE THAT BOTH OF THE RADIOBUTTONS ARE CHECKED.
and there is no chance that both the radiobuttons are in two different groups since in a single group minimum 2 radiobuttons should be there.
check you coding.or if required redraw the radiobuttons. and select the radiobuttons properly while grouping them together..after grouping you will see dotted lines aroung them.
just try that. reward if helpful.
regards,
pankaj singh

Radio button in module pool programming

Hello,
Am placing 4 radio button when designing in module pool but at
run time all radio button are getting marked i want only first radio button to be marked and remaining to be with visible but not highlighted plz let me know wht to do in PBO event.

Hi,
Goto to screenpainter of that screen .
Drag and select all the Radio Buttons .
Goto Edit>Grouping>Radiobutongroup-->Define.
Now see the Output.
Regards,
Morris Bond.
Reward Points if Helpful.

Creating Radio Button in Module Pool

Hi All,
I have created a Two radio button on screen 100.
When I run this I will get both radio button selected.
I am unable to group these.
How can I group both?
I am using 4.7. I am not getting Graphical Layout of the screen.
How to group in classical only.

Hi Praveen,
Steps to group radiobuttons with alphanumeric editor.
<li>Place the cursor on first radiobutton and click on Graphical element button in the application toolbar.
<li>Now place the cursor on 2nd radiobutton and click on Define graph.group button in the application toolbar.
<li>Now radiobuttons are grouped and first one is defaulted.
Thanks
Venkat.O

How to disable the inputfield using radio button dynamically in module pool

How to disable the inputfield on the screen using radio button dynamically in module pool.
Please suggest .
        Thanks.
Edited by: Lavanya YH1504 on Jul 30, 2010 1:20 PM

I got it thank you.
LOOP AT SCREEN.
    if screen-GROUP1 = 'LA1'.
       If RADIO1 = 'X'.
        SCREEN-INPUT = '0'.
        MODIFY SCREEN.
     ELSEIF RADIO2 = 'X'.
       screen-input = '1'.
      ENDIF.
      MODIFY SCREEN.
    ENDIF.
ENDLOOP.
ENDMODULE.                 " STATUS_0100 OUTPUT
Edited by: Lavanya YH1504 on Jul 30, 2010 1:51 PM

Sort up and sort Down push buttons in module pool with table control wizard

hi,
i have created 2 buttons for Sort up and sort Down push buttons in module pool with table control wizard
please any one can help me.
regards

Hi
Following code is to enable and disable the tbl control using two buttons. Just alter the code and for each button write the sort code.
REPORT YJAN27_SCREEN                                               .
TABLES: SFLIGHT, YFLIGHT_28.
TYPES: BEGIN OF struct1,
      carrid like sflight-carrid,
      connid like sflight-connid,
      fldate like sflight-fldate,
       END OF struct1.
CONTROLS TBL1 TYPE TABLEVIEW USING SCREEN 2700.
DATA: OK_CODE LIKE SY-UCOMM,
      CARRID LIKE SFLIGHT-CARRID,                                    "cols in tbl ctrl
      CONNID LIKE SFLIGHT-CONNID,
      FLDATE LIKE SFLIGHT-FLDATE,
      itab TYPE TABLE OF STRUCT1 WITH HEADER LINE,
      cols like line of TBL1-COLS,
      FLAG TYPE I.
FLAG = 1.
CALL SCREEN 2700.
*&      Module STATUS_2700 OUTPUT
*       text
MODULE STATUS_2700 OUTPUT.
SET PF-STATUS 'BACK'.
* SET TITLEBAR 'xxx'.
ENDMODULE.                 " STATUS_2700 OUTPUT
*&      Module USER_COMMAND_2700 INPUT
*       text
MODULE USER_COMMAND_2700 INPUT.
OK_CODE = SY-UCOMM.
CASE OK_CODE.
WHEN 'BACK'.
    LEAVE PROGRAM.
WHEN 'DIS'.                                                         "write code for sort up
    loop AT TBL1-COLS INTO COLS.
       COLS-SCREEN-INPUT = 0.
        MODIFY TBL1-COLS FROM COLS.
    ENDLOOP.
    FLAG = 2.
WHEN 'ENA'.                                                       "write code for sort down
    loop AT TBL1-COLS INTO COLS.
        COLS-SCREEN-INPUT = 1.
        MODIFY TBL1-COLS FROM COLS.
    ENDLOOP.
    FLAG = 1.
ENDCASE.
ENDMODULE.                 " USER_COMMAND_2700 INPUT
*&      Module GET_DATA OUTPUT
*       text
MODULE GET_DATA OUTPUT.
select carrid connid fldate from SFLIGHT into table itab.
ENDMODULE.                 " GET_DATA OUTPUT
*&      Module POPULATE_TBL OUTPUT
*       text
MODULE POPULATE_TBL OUTPUT.
    MOVE-CORRESPONDING ITAB TO SFLIGHT.
ENDMODULE.                 " POPULATE_TBL OUTPUT
*&      Module CHANGE_SCREEN OUTPUT
*       text
MODULE CHANGE_SCREEN OUTPUT.    " use this module if you want to hide the other button
CASE FLAG.
WHEN 1.
    LOOP AT SCREEN.
      IF SCREEN-NAME = 'B_ENA'.
        SCREEN-INVISIBLE = 1.
         MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
    LOOP AT SCREEN.
      IF SCREEN-NAME = 'B_DIS'.
        SCREEN-INVISIBLE = 0.
         MODIFY SCREEN.
      ENDIF.
   ENDLOOP.
WHEN 2.
    LOOP AT SCREEN.
      IF SCREEN-NAME = 'B_DIS'.
        SCREEN-INVISIBLE = 1.
        MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
    LOOP AT SCREEN.
      IF SCREEN-NAME = 'B_ENA'.
        SCREEN-INVISIBLE = 0.
         MODIFY SCREEN.
      ENDIF.
   ENDLOOP.
ENDCASE.
ENDMODULE.                 " CHANGE_SCREEN OUTPUT
PROCESS BEFORE OUTPUT.
MODULE STATUS_2700.
MODULE CHANGE_SCREEN.     " use this if you want to display one button at a time
MODULE GET_DATA.
loop at itab WITH control TBL1.
    MODULE POPULATE_TBL.       " populate tbl ctrl
endloop.
PROCESS AFTER INPUT.
MODULE USER_COMMAND_2700.    " do the sort operations
loop at itab.
endloop.
Hope this helps
Regards,
Jayanthi.K

Can we use Initilization event in module pool program?

Hi All,
Can we use Initialization event in module pool program? If not why?
Thanks In Advance!!!!!!!!!

The runtime environment creates the INITIALIZATION event and calls the corresponding event block (if it has been defined in the ABAP program).
http://help.sap.com/saphelp_nw70/helpdata/EN/fc/eb2d67358411d1829f0000e829fbfe/content.htm
SEE THE ABOVE LINK...THINK IT WILL SOLVE ALL YOUR DOUBTS
REGARDS
RACHEL

How to use Radio Buttons in SAP BI 7 for a set of three fields?

Dear SAP Gurus,
We are using SAP BI 7. We need to use Radio button to select one field name (out of a set of three fields) which
appeared on selection screen.
The scenario is; we have three fields
1) Field Name A
2) Field Name B
3) Field Name C
Now, we need to select one field(using Radio button) from the above and later the report related to the above
selected field should be displayed.
The three reports will be as follows:
1) Report A
2) Report B
3) Report C
if Field Name A is selected then Report A will be displayed,
if Field Name B is selected then Report B will be displayed and
if Field Name C is selected then Report C will be displayed.
To display the report we have two cases;
1) There will be a common selection screen and all the three reports will come in single workbook but in seperate worksheet.
2) There will be a common selection screen and all the three reports will come in same worksheet, one after the other.
Is it possible to create the report in this manner, if yes, please suggest the steps.
Regards,
DV.

I think you would just use commands to do the following:
1. Hide report Analysis Item 2 and Analysis Item 3 if the 1st button was pushed.
2. Hide report Analysis Item 1 and Analysis Item 3 if the 2nd button was pushed.
3. Hide report Analysis Item 1 and Analysis Item 2 if the 3rd button was pushed.
Hope that helps...

Using Radio Buttons in widget to store Data

I am building my 2nd widget and I am curious to know if anyone has used radio buttons within the edit mode to change/modify/set variables before. I don't want a radio button widget. I want a complex menu widget that will hide/show selected items within my playbar such as the forward button.
Currently I am using User variables to determine all the hide/shows for my playbar. But I would like to make it more user friendly by having a visual widget people could use to turn buttons on off, set url's for help documents etc. And have everything be based on a per slide basis. just wondering if anyone has done anything like this in the past.
The other part of this is, can I use a widget to construct User variables. In As2 I was able to create variables in root and then set those accordingly without having to add them to every projects user variables. But it appears in AS3 it is not possible to create a variable of a clip/objects parent is anyone familiar with this?
Thanks ahead of time.
zsrc

Hi zsrc,
If you're using WidgetFactory then here's a post that might give you the information that you need.
http://www.infosemantics.com.au/widgetking/2010/11/widget-properties-how-theyre-used/
As far as the code you'd write in your circumstance, a radio button's selected property tells you if it's... well... selected. So you can write that to a widget property like so:
properties.MyPropertyName = myRadioButton.selected;
That line would be inside the saveProperties template method as mentioned in the article above.
override protected function saveProperties():void
    properties.MyPropertyName = myRadioButton.selected;
Then you can read that property back when the widget is in the published Captivate movie.
override protected function enterRuntime():void
   if (properties.MyPropertyName == true) {
      // The Radio Button was selected. Do stuff
   } else {
      // The Radio Button wasn't selected. Do stuff?

How to use Radio buttons in WAD to select different condition in a query

Hi Guru,
I am new to WAD, I want to use radio buttons in selection screen of query for different selections based on selection criteria. I am aware of executing different queries using different radio buttons. but i want to use single queries for different radio button selections.
I have found some relevant topic to it but not got exact solution. Please guide me.

Hi Avinash,
Drag a DropDown webitem into your template. Under DropDown webitem properties, Data Binding -> Fixed List of Options.
Fixed Option -> Action -> Command via Command Wizard, Command -> Commands for Data Providers -> Data Provider Commands for Filter Values -> SET_SELECTION_STATE_SIMPLE. Data Provider Affected -> choose the main DP Query here. Characteristic -> choose Employee Group characteristic here as present in your DP Query. Sign -> INCLUDING, Operator -> EQUAL_SELECTION, Equals -> MEMBER_NAME, Member Name -> specify the value here i.e. Employee1 etc.
Repeat above Fixed Option step for Employee2, Employee3 etc. selections. For 'All' option choose Command CLEAR_SELECTION_STATE with Data Provider Affected as the main DP Query & Characteristic as Employee Group.
--Priya

Issue in using radio button in module pool

Similar Messages

Maybe you are looking for