Issue SLFI should open in read only or display mode

If we open an issue in CRM_DNO_MONITOR we can choose whether the issue
should be opened in change mode or read mode.
We can do this by means of >Extra > Settings and then choosing for
Display or Change in the General tab.
This way we can read issues as a default setting, this way the issue is
not locked !! Only if we want to change it we set it to change mode and
continue with the issue.
However if we do the same using DSWP or SOLMAN_ISSUE_MGMT the issue is
always opened in change mode, and results in a lot of locks in the
system. How can this be changed, is there some kind of customizing for
this or menu option.
The handling of issue does not seem to be consistent for the different
methods in handling them.
Who has the same problem with locking?
Who has a working bypass w/o manual switching from change to display?
Thanks in advance,
Peter Hendriksen

Thanks for the reply.
Anything is welcome at this point.
And yes, I did try both through PowerShell and through the Unlocker and the behavior is pretty much the same. If the item is checked in, there is no trace that it is locked, if I Check it Out (the only thing I can really do with it) it shows as "LongTerm"
but then throws the same exception
Unlocking...
Error occurred. Details:
Save Conflict
Your changes conflict with those made concurrently by another user. If you want your changes to be applied, click Back in your Web browser, refresh the page, and resubmit your changes.
   at Microsoft.SharePoint.SPFile.CheckIn(String comment, SPCheckinType checkInType, Boolean bIsMigrate, SPUser modifiedBy)
   at Microsoft.SharePoint.SPFile.CheckIn(String comment)
   at ForceSPItemUnlock.UnlockerForm.UnlockButton_Click(Object sender, EventArgs e)
The method UpdateItemCheckoutExpiration sounds insteresting though.
"The more difficult something became, the more rewardant it was in the end"
http://ftduarte.blogspot.com

Similar Messages

MS Access 2007 opening in read only for a client

Hi all,
I have a client that is using a shared database with 6 other people in their office. He is the first one to move to Windows 7.
He can open the database without any problem, but it opens as read only. I've seen others with similar issues in this and other forums. I wondered if there are solutions out there for this?

Smorley,
> I have a client that is using a shared database with 6 other people in
> their office. He is the first one to move to Windows 7.
>
Please ask in novell.support.netware.client.winnt-2x-xp and tell us what
version of the client you are using.
- Anders Gustafsson (Sysop)
The Aaland Islands (N60 E20)
Novell has a new enhancement request system,
or what is now known as the requirement portal.
If customers would like to give input in the upcoming
releases of Novell products then they should go to
http://www.novell.com/rms

Generally when creating a Word file from either a Mac or Win7 pc and opening it on two different machines (either one first) it always prompts that the file is open and will be opened as read only. However opening a CSS file does not prompt that it is alr

Generally when creating a Word file from either a Mac or Win7 pc and opening it on two different machines (either one first) it always prompts that the file is open and will be opened as read only.
However opening a CSS file does not prompt that it is already open on or from any machine which is causing code edits to be lost.
What we found from out testing:
- The file can be saved from one user to the server and WILL NOT PROMPT on other machines until the saving machine has the Dreamweaver program closed completely
- The file can be closed and Dreamweaver minimised to the launch bar but it still will not register on other machines that it has been changed.
- Also, until the Dreamweaver program is closed on the machines, it will continue to open it's saved version of the file.
Example Scenario:
- User 1 opens test.css (which is 2000 lines) and adds some code to the end of the file to bring it up to 2500 lines
- Meanwhile User 2 opens test.css as well (opens as 2000 lines as User 1’s edits have not yet been saved) and adds in code to bring it to 2300 lines
- User 1 saves his file and closes it - but Dreamweaver is still open.
- User 2 also saves his file and leaves Dreamweaver open.
- The server will report the size and last edit of the file the same as User 2 as he was the last person to save it (and if you open from the Win7 Machine it will show as User 2’s 2300 line version)
- If User 1 then open's the file again (from either the 'recent' in Dreamweaver OR clicking on the file directly in Finder...which version opens.... The version that User 1 saved! Not the true version on the server, but the version that User 1 edited and saved with 2500 lines in it.
- Same for User 2, he will open 'his' version with 2300 lines in.
Other information:
- Files are opened directly from the server
- Sometimes the users will save incrementally and re-open
- Most of the time users will save incrementally and keep the files open
- The users will never not save incrementally and just save when closing the file once finished
- The users are usually working on the files all day
- It is always the bottom lines of code that are lost. It could be a case of the two versions being mixed up and cutting off the newly added lines based on the line count (possibly).
It is as if Dreamweaver is holding a cache of the version locally and then only properly looking back to the server when it has been completely closed. It is very difficult to see how the server is causing such an impact on these files, there are very few logs which are giving any indication to the root cause of the problems.
Anyone know if this is a known issue?
Is there a way that there can be a featured implemented on the server that doesn't allow another user to open a file if it is already open on another machine?
Thanks

Your server file handling has nothing, and really nothing to do with Adobe software. If files don't get locked for (over-)writing and/or lose connection to the program opening them, then your server is misconfigured. It's as plain and simple and that. Anything from "known file types"/ file associations not being set correctly, MIME types being botched, crooked user privileges and file permissions, missing Mac server extensions, delayed file writing on the server, generic network timeout issues and what have you. Either way, you have written a longwinded post with no real value since you haven't bothered to provide any proper technical info, most notably about the alleged server. Either way, the only way you can "fix" it is by straightening out your server and network configuration, not some magic switch in Adobe's software.
Mylenium

Access Database Opens in Read Only for Users

I just moved an Access Database to a new server (from Server 2003 to Server 2012). From the server, using Office 2010, I can open the database without issue but, if a user try's to open the same database from either a shortcut or mapped with Office 2010,
they get the message that the database is Read Only. Did I miss a step in moving the database to the new server? Thanks

Hi,
Did your user get the error message "You are trying to open a read-only database..."? If it was, please try the following method:
On the desktop, double-click My Computer.
Locate the Microsoft Access database that you moved.
Right-click the database name, and then click Properties.
In the Properties dialog box, clear the Read-only check box under
Attributes.
Click OK to apply the change.
Open your database in Access.
Resource:
http://support.microsoft.com/kb/324666/en-us (It also applies to Access 2010)
Hope it's helpful.
Regards,
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

GPO settings - documents in sharepoint 2007 sometimes open in read-only mode - needs IE reset to fix

Hi,
We've got an intranet running on SharePoint 2007.
We also enforce alot of group policies to our users.
But there is a problem that keeps reoccuring:
On random moments, when a user tries to edit a document on any random document library in SP 2007, it gets opened in read-only mode.
The only temporary fix we found for this is resetting the IE settings in Internet Options -> 'tab' advanced -> Reset IE settings... and pressing Reset.
We think it is some GPO setting that we have malconfigured or forgot to configure and we hope that someone could point us in a direction to troubleshoot or even solve this.
Thanks in advance for reading and providing help.
Inkendaal

Hello,
I also suspect that there might be issue with IE plug-in so could you confirm that? you can also tell su what plug-in you see in IE.
You might also want to look at this similar threads:
http://stackoverflow.com/questions/19164313/sharepoint-opens-documents-in-read-only-mode-for-users-with-office-2010
http://social.technet.microsoft.com/Forums/windows/en-US/a0849e73-d347-4d12-8424-9d5bb6bfb004/all-office-files-from-sharepoint-are-opened-read-only?forum=w8itproappcompat
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help

SP2013 and Project 2013 - project files open in read-only mode with no options to edit only Save As

Hi all,
Environment:
SharePoint 2013 (15.0.4420.1017) RTM
Windows 8 - Project 2013 (15.0.4433.1506) 32Bit
Issue details:
When opening .mpp files stored within SharePoint they are opened successfully within Project 2013 however they are opened in Read-Only mode with no options to edit/check out only Save As. The
same outcome is experienced if you click the document link within SharePoint or you chose to edit from the document menu.
Opening the file through windows explorer also opens only in read-only mode.
To date we’ve tested the following
Windows 7 – Office 2010 = working as expected
Windows 8 – Office 2010 = working as expected
Windows 7 – Office 2013 = opening as read only, no prompt to edit
Windows 8 – Office 2013 – opening as read only, no prompt to edit
Current thinking is that it is an issue with either the SharePoint Office Documents Class ActiveX control or Project 2013 itself interacting with SharePoint 2013.
We have tested this in multiple SP2013 environments with the same outcomes.
The workaround therefore is to save locally and then upload again which is not ideal.
Unable to find an exact issue match to this.
Any help with this appreciated.

Hi Dan,
For us after investigating this further it was found that using the document menu to edit or checkout and then edit results in the project file being opened in read-only mode.
The same issue was present for Visio files.
Using the FILES ribbon menu results in the document being opened in edit mode successfully in both Project and Visio.
Please note that we found that this issue only exists within document libraries where checkout is required to edit which was our case. If checkout is not required the document
menu can also be used as expected.
Cheers,
Dan

Word 2007 - documents open in read only mode

Got a couple of users who are getting this issue. When they want to open some documents from a file share, it opens as read only (this is random) - comes up with a prompt saying that this file is locked for editing by another user. If they close
it, wait a few minutes then it opens fine and they can edit it. It has nothing to do with permissions and no one else has this document open.
Any ideas?

Thanks for the reply.
Anything is welcome at this point.
And yes, I did try both through PowerShell and through the Unlocker and the behavior is pretty much the same. If the item is checked in, there is no trace that it is locked, if I Check it Out (the only thing I can really do with it) it shows as "LongTerm"
but then throws the same exception
Unlocking...
Error occurred. Details:
Save Conflict
Your changes conflict with those made concurrently by another user. If you want your changes to be applied, click Back in your Web browser, refresh the page, and resubmit your changes.
   at Microsoft.SharePoint.SPFile.CheckIn(String comment, SPCheckinType checkInType, Boolean bIsMigrate, SPUser modifiedBy)
   at Microsoft.SharePoint.SPFile.CheckIn(String comment)
   at ForceSPItemUnlock.UnlockerForm.UnlockButton_Click(Object sender, EventArgs e)
The method UpdateItemCheckoutExpiration sounds insteresting though.
"The more difficult something became, the more rewardant it was in the end"
http://ftduarte.blogspot.com

Project files open in read-only mode

project files open in read-only mode in ms project 2013.But in the case of MS Project 2007 it opens in READ\WRITE mode .what should i do so that project will opens in READ\WRITE mode by default in MS Project 2013

In addition to John's excellent reply, I'd add that if you are talking about Project Server, this is by design that the projects in 2013 version open in read-only mode, in order to require an explicit operation to check-out the file. This prevents to have
many checked out files by mistake.
See this
article on my blog.
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |

Why do attachments in Word open as "read only"?

Using Apple Mail, all Word document attachments open as "read-only" even if they were sent as read-write or plain .doc files. I have to save as some other file name in order to save them or edit them.
How do I eliminate this problem?
McKenna

Try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work.
Isolating an issue by using another user account
If the problem is still there, try booting into the Safe Mode. Shut down the computer and then power it back up. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the grey Apple icon and a progress bar appear. The boot up is significantly slower than normal.
Safe Mode
Safe Mode - About
General information.
Isolating issues in Mac OS X
Permissions Troubleshooting
Step by Step to Fix Your Mac

Documents opening as read only

Since migrating to win 7 all word documents copied to iomega ix4-200 opening as read only--how do we fix this!
There are 4 of us using the iomega as a shared storage and it has become a real problem. We did not have this problem before win 7 and it is not happening to every single word file every time but is happening way too often. Don't know if it is a word setting issue or the Iomega not liking win 7.

Hi jwbennet, welcome to the forums,
sounds like some of the documents were possibly copied to the drive from a write protected drive similar to a closed cd or dvd; when written to cd or dvd files will become write protected.
Please try the following; click on a, or select multiple, folder(s) and right click on them, then select properties. Ensure that the Attributes - Read Only box is empty and then apply the change.
Hope this helps.
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Query faild against database that is opened in read only mode

ORA-16000: database open for read-only access
Hi ,
I am quering against a database that been opened in read only mode (10g version)
SQL> select controlfile_type,open_mode,database_role from v$database;
CONTROLFILE_TYPE OPEN_MODE DATABASE_ROLE
STANDBY READ ONLY PHYSICAL STANDBY
Currently when selecting against this database
i am getting the following error:
SELECT PS_RF_PROVGRP_VW.SETID, PS_RF_PROVGRP_VW.PROVIDER_GRP_ID, PS_RF_PROVGRP_VW.NAME1,
PS_RF_PROVGRP_VW.STATUS, PS_RF_PROVGRP_VW.SYNCID, PS_RF_PROVGRP_VW.SYNCDTTM
FROM PS_RF_PROVGRP_VW
ERROR at line 1:
ORA-00604: error occurred at recursive SQL level 1
ORA-16000: database open for read-only access
The owner of the object is PSSYS and i am running the queries as user INFORMIX.
select owner,object_name,object_type from dba_objects where object_name ='PS_RF_PROVGRP_VW';
OWNER OBJECT_NAME OBJECT_TYPE
INFORMIX PS_RF_PROVGRP_VW SYNONYM
PSSYS PS_RF_PROVGRP_VW VIEW
User informix have "SELECT ANY TABLE" privilage
In the source database (e.g: not the cloning one) the queries results are returning susseccfully ,
and only in the clonning the database the problem exists.
Does someone have an idea what the problem could be ?
Thanks.

Hi
Object can become invalid, if the underlying objects are dropped/invalidated.
So even if you create or validate the underlying objects these objects by themself do not become valid. You have to either make them valid or you should use it atleast one time as select/desc or any other query so that Oracle implicitly make it valid.
Your source datatabase has valid synonym because after dropping/creating you must have selected that synonym atleast one, but this selection procedure would be after you copied your data to the target database.
Regards

Microsoft office documents opens as read only in sharepoint 2010

Hi all,
We are facing strange issue with editing microsoft office documents in sharepoint. When we open the documents for editing it opens as read only and when we try to save the file it displays message as could not save the file the document is read
only..
Can anyone help to resolve this issue..

Hi Manjunath,
Did the
dialog of "How would you like to open this file:Read only/Edit" popup when click the Word document?
Please also check if it is related to Site collection Quota exceeding the allocated limit per this similar post,
http://sharepoint.stackexchange.com/questions/29689/sharepoint-2010-opens-document-in-read-only-mode
Thanks
Daniel Yang
TechNet Community Support

Help with a fcpx library that is locked "could not be opened. Read-only file system"

Hi all,
I recently moved all my fcpx projects/events to a new Harddrive - I thought I did this correctly by copying/duplicating all projects/events from within FCPX.
When I last used FCPX all the projects/events were there - no issues. Also, when I look at package contents - everything is still there in terms of events and file sizes.
All the library files are on an external hard drive, on an encrypted disk image. Now a week later I have tried to open FCPX and I get the following error
"The document “MND_Z_FCPX” could not be opened. Read-only file system" and nothing will open.
Have checked permissions - these all seem in order. OSX is10.9.5
Any suggestions as to what might be the issue?
Thanks in advance.
R

the permissions themselves look ok - they have my two computer profiles as read/write. I also note that on some occasions the library has opened in my other Computer profile, but not in the one that I want it to open.
So I think you're right, there is something with permissions happening here. I keep a work and personal computer profile.
Don't know how it happened - but the volume is definitely Read Only - even though I've created a Read/Write permissions for it

Shared folder files open as read only even though they are set up as read write

Hello, I've recently purchased a iMac to work alongside my mac book pro. Primarily, i want this for ease of use at home and as a 'back up' to my pro should anything happen.
I have a number of folders and files on my pro that I wish to access on the iMac and have set up shared folders to enable this with a new profile and read/write permissions. This all works fine until I open the document, make changes then find that I have to save as a different name as the files open as 'read only'?
Is there anything I've missed? I would of expected 'read/write' permissions to enable me to save files as edited?
Any help appreciated otherwise, I'll have to resort to copying files between machines which would be a major dissapointment!
Thanks in advance

Found the solution...basically the permissions are not automatically cascaded down to sub folders and files so you have to do the following... modified from https://discussions.apple.com/thread/2743520?start=0&tstart=0
On the folder that you would like to change, select the Get Info and then click on the cogwheel at the bottom of the Get Info dialog.
Click on the menu pick "Apply to enclosed items ..." and confirm the warning message.
Then the same read & write permissions are applied to all the subfolders of the selected folder.

Word 2010 Files Open as Read Only

Greetings !
I have an end user who has a somewhat enigmatic and oh so mysterious issue concerning various and random Word files stored on one of our file servers.
Let's say she opens 10 different Word files. Of those 10, 2 or 3 may open as READ ONLY when that attribute is clearly not set on any of them! Permissions look OK. The files are not in use.
This occurs on a Windows 7 client pulling files from a 2012 file server.
I dunno on this one. Suggestions?
This topic first appeared in the Spiceworks Community

Hi Doug,
Please check the KB article below and see if it answered your question:
http://support.microsoft.com/kb/2018958/en-us
Hope this helps.
Best Regards,
Steve Fan
TechNet Community Support

Issue SLFI should open in read only or display mode

Similar Messages

Maybe you are looking for